Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Differential Pulse Techniques on Modified Conventional‐Size and Microelectrodes. Electroactivity of Poly[4,4′‐bis(butylsulfanyl)‐2,2′‐bithiophene] Coating Towards Dopamine and Ascorbic Acid Oxidation

Poly[4,4′‐bis(butylsulfanyl)‐2,2′‐bithiophene] modified conventional‐size and (ultra)microelectrodes are first investigated in acetonitrile and quasi‐neutral aqueous solution with respect to the repeatability of the responses obtained both in cyclic voltammetry and in differential pulse voltammetry. The reactivity towards ferrocene and hydroquinone, chosen as benchmark oxidizable substances in the two media, respectively, is considered. Comparison is made with the behavior of poly(3‐methylthiophene) as electrode coating, which is one of the most commonly used redox mediators in amperometric sensors based on coatings consisting of conducting polymers. The results confirm the appealing properties of poly[4,4′‐bis(butylsulfanyl)‐2,2′‐bithiophene], previously evidenced by us in different electrochemical studies: it exhibits particularly high stability and the characteristics of the current/potential curves obtained make it particularly suitable for analytical purposes. After performing these tests, the quantitative determination of dopamine by modified microelectrode is examined and the simultaneous voltammetric determination of ascorbic acid and dopamine is considered. The possibility of working profitably with a microelectrode at very low buffer‐supporting electrolyte concentration is ascertained.     

Synthesis and NMR characterization of 3,4′-dibutoxy-2,2′-bithiophene

3,4′-Dibromo-2,2′-bithiophene was converted, in high yield, into the corresponding dibutoxy derivative. The ¹H ¹³C and nmr data are discussed in comparison with those of 3,3′- and 4,4′-dibutoxy-2,2′-bithiophene in relation to regiochemistry.     

Masking of Lewis acidity trends in the solid‐state structures of trichlorido‐ and tribromido(2,2′:6′,2′′‐terpyridine‐κ3N,N′,N′′)gallium(III)

The molecular structures of trichlorido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaCl₃(C₁₅H₁₁N₃)], and tribromido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaBr₃(C₁₅H₁₁N₃)], are isostructural, with the Ga^III atom displaying an octahedral geometry. It is shown that the Ga—N distances in the two complexes are the same within experimental error, in contrast to expected bond lengthening in the bromide complex due to the lower Lewis acidity of GaBr₃. Thus, masking of the Lewis acidity trends in the solid state is observed not only for complexes of group 13 metal halides with monodentate ligands but for complexes with the polydentate 2,2′:6′,2′′‐terpyridine donor as well.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Synthesis of Novel Chiral Biphenylamine Ligand 6,6'‐Dimethoxy‐2,2′‐diaminobiphenyl

A new chiral ligand 6,6′‐dimethoxy‐2,2′‐diaminobiphenyl was successfully prepared from 3‐nitrophenol via iodination, Ullmann coupling, and reduction. The resolving reagent (2R, 3R)‐ or (2S,3S)‐2,3‐di (phenylaminocarbonyl)tartaric acid was prepared from commercially available tartaric acid in large scale and was used to resolve the racemic 6,6′‐dimethoxy‐2,2′‐diaminobiphenyl. The chiral 6,6′‐ dimethoxy‐2,2′‐diaminobiphenyl obtained was proved to be enantiomerically pure.     

Komplexe von Vanadium und Titan mit 2,2′-Dihydroxyazobenzen. Kristallstrukturen von 2,2′-Dihydroxyazobenzenato(2-)-oxo-methoxo-methanol-vanadium(V) und μ-Oxo-bis[2,2′-dihydroxyazobenzenato(2-)-oxo-vanadium(V)]

Complexes of Vanadium and Titanium with 2,2′-Dihydroxyazobenzene. Crystal Structure of 2,2′-Dihydroxybenzenato(2-)-oxo-methoxo-methanol-vanadium(V) and μ-Oxo-bis[2,2′-dihydroxyazobenzenato(2-)-oxo-vanadium(V)] By the reaction of 2,2-dihydroxyazobenzene with titanium(IV) the expected compound bis [2,2′-dihydroxybenzenato(2-)-titanium(IV)] was obtained. On the other hand in the dependence on the experimental conditions vanadium forms further compounds beside the bisligand complex. They were characterized by mass spectrometry resp. X-ray structural analysis. Crystallographic data see ?Inhaltsübersicht”?.     

Density functional theory study of a molecular allosteric switch for 2,2′‐bipyridyl‐3,3′‐15‐crown‐5

A classical model of “molecular machine,” which acts as an ON–OFF switch for 2,2′‐bipyridyl‐3,3′‐15‐crown‐5 ( L ), has been theoretically studied. It is highly important to understand the mechanism of this switch. The alkali‐metal cations (Na⁺ and K⁺) and W(CO)₄ fragment are introduced to coordinate with the different active sites of L , respectively. The density functional theory (DFT) method is used for understanding the stereochemical structural natures and thermodynamic properties of all the target molecules at B3LYP/6‐31G(d) and SDD (Stuttgart–Dresden) level, together with the corresponding effective core potential (ECP) for tungsten (W). The fully optimized geometries have been performed with real frequencies, which indicate the minima states. The nucleophilicity of L has been investigated by the Fukui functions. The natural bond orbital analysis is used to study the intermolecular charge‐transfer interactions and explore the origin of the internal forces of the molecular switch. In addition, the binding energies, enthalpies, Gibbs free energies, and the cation exchange energies have been studied for L , W(CO)₄ L , and their corresponding complexes. The properties of the complexes displayed by in presence or absence of the W(CO)₄ fragment are also analyzed. The calculated results of allosterism displayed by L are in a good agreement with the experimental results. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011     

Proton Nuclear Magnetic Resonance Measurements of 2′-Aminodeoxyuridylyl-3′,5′-Deoxyuridine

A dideoxyribonucleotide, 2′-amino-2′-deoxyuridylyl 3′,5′-deoxyuridine, containing an unsual base (2′-amino-2′-deoxyuridine) that isresistant to nucleases was investigated by ′H NMR. The pK_a of the protonation of the amino group (5.8) was determined by profiles of chemical shifts of protons in the vicinity of amino group versus pH. However, protonation of the amino group has little effect on the conformation of the dimer, assumed to be B-form DNA. This conclusion is drawn from the chemical shift data and coupling constants of H₁-H₂. Thus, 2′-amino-2′-deoxyuridine can be used in antisense and anticode oligonucleotides.     

A three‐dimensional cadmium(II) coordination polymer: poly[[[μ‐4,4′‐(propane‐1,3‐diyl)dipyridine‐κ2N:N](μ‐3,3′‐thiodipropionato‐κ3O,O′:O)cadmium(II)] monohydrate]

In the title coordination polymer, {[Cd(C₆H₈O₄S)(C₁₃H₁₄N₂)]·H₂O}_n, the Cd^II atom displays a distorted octahedral coordination, formed by three carboxylate O atoms and one S atom from three different 3,3′‐thiodipropionate ligands, and two N atoms from two different 4,4′‐(propane‐1,3‐diyl)dipyridine ligands. The Cd^II centres are bridged through carboxylate O atoms of 3,3′‐thiodipropionate ligands and through N atoms of 4,4′‐(propane‐1,3‐diyl)dipyridine ligands to form two different one‐dimensional chains, which intersect to form a two‐dimensional layer. These two‐dimensional layers are linked by S atoms of 3,3′‐thiodipropionate ligands from adjacent layers to form a three‐dimensional network.     

Dehydrogenative Synthesis of 2,2′‐Bipyridyls through Regioselective Pyridine Dimerization

2,2′‐Bipyridyls have been utilized as indispensable ligands in metal‐catalyzed reactions. The most streamlined approach for the synthesis of 2,2′‐bipyridyls is the dehydrogenative dimerization of unfunctionalized pyridine. Herein, we report on the palladium‐catalyzed dehydrogenative synthesis of 2,2′‐bipyridyl derivatives. The Pd catalysis effectively works with an Ag^I salt as the oxidant in the presence of pivalic acid. A variety of pyridines regioselectively react at the C2‐positions. This dimerization method is applicable for challenging substrates such as sterically hindered 3‐substituted pyridines, where the pyridines regioselectively react at the C2‐position. This reaction enables the concise synthesis of twisted 3,3′‐disubstituted‐2,2′‐bipyridyls as an underdeveloped class of ligands.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

EQCM study of the p- and n-doping processes of a poly[4,4-bis(butylsulphanyl)-2,2-bithiophene]

Electrogenerated deposits of poly[4,4^′-bis(butylsulphanyl)-2,2^′-bithiophene] have been characterised in the presence of different supporting electrolytes, by coupling current (charge) to microgravimetric measurements from the electrochemical quartz crystal microbalance (EQCM). The simultaneous collection of voltammetric measurements and of data relative to mass changes shows the influence exerted by the nature of the supporting electrolyte on the charge-discharge steps of both p- and n-doping processes. Interestingly, the microgravimetric data collected corresponding to the pre-peaks of both doping processes suggest the occurrence of two opposite motions of ions (ingress into and exit out from the polymer) in the relevant potential region, giving a contribution to the study of the `residual charge' phenomenon.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Approaches to wired terpyridine: Bithienyl alkynyl derivatives of 2,2′:6′,2″-terpyridine and their ruthenium(II) complexes

Two approaches to the formation of ruthenium(II) complexes containing ligands with conjugated 2,2′:6′,2″-terpyridine (tpy), alkynyl and bithienyl units have been investigated. Bromination of 4′-(2,2′-bithien-5′-yl)-2,2′:6′,2″-terpyridine leads to 4′-(5-bromo-2,2’-bithien-5′-yl)-2,2′:6′,2″-terpyridine (1), the single crystal structure of which has been determined. The complexes [Ru(1)₂][PF₆]₂ and [Ru(tpy)(1)][PF₆]₂ have been prepared and characterized. Sonogashira coupling of the bromo-substituent with (TIPS)CCH did not prove to be an efficient method of preparing the corresponding complexes with pendant alkynyl units. The reaction of 4′-ethynyl-2,2′:6’,2″-terpyridine with 5-bromo-2,2′-bithiophene under Sonogashira conditions yielded ligand 2, and the heteroleptic ruthenium(II) complex [Ru(2)(tpy)][PF₆]₂ has been prepared and characterized.     

Preparation and properties of aromatic polyimides from 2,2′-bis(p-aminophenoxy)biphenyl or 2,2′-bis)p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing a biphenyl-2,2′-diyl or 1,1′-binaphthyl-2,2′-diyl unit were prepared by a conventional two-step method starting from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides. The polyimides having inherent viscosities of 0.69–0.99 and 0.51–0.59 dL/g, respectively, were obtained. Some of these polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. Transparent, flexible, and pale yellow to brown films of these polymers could be cast from the DMAc or NMP polyamic acid solutions. These aromatic polyimides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 200–235 and 286–358°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation of poly(alkylenebenzimidazole) by ruthenium complex catalyzed polycondensation of 3,3′‐diaminobenzidine with α,ω‐diols

The reactions of 3,3′‐diaminobenzidine with 1,12‐dodecanediol in 1 : 1–1:3 molar ratios in the presence of RuCl₂(PPh₃)₃ catalyst give poly(alkylenebenzimidazole), [ (CH₂)₁₁ O (CH₂)₁₁ Im / (CH₂)₁₀ Im ]_n (Im: 5,5′‐dibenzimidazole‐2,2′‐diyl) (I_a‐I_d) in 71–92% yields. The relative ratio between the [(CH₂)₁₁ O (CH₂)₁₁ Im ] unit (A) and the [‐ (CH₂)₁₀ Im ] unit (B) in the polymer chain varies depending on the ratio of the substrates used. The polymer I_a obtained from the 1 : 3 reaction contains these structural units in a 98 : 2 ratio. The polymers are soluble in polar solvents such as DMF (N,N‐dimethylformamide), DMSO (dimethyl sulfoxide), and NMP (N‐methyl‐2‐pyrrolidone) and have molecular weights M_n (M_w) of 4,200–4,800 (4,800–6,500) by GPC (polystyrene standard). The polymerization of the diol and 3,3′‐diaminobenzidine in higher molar ratios leads to partial cross‐linking of the resulting polymers I_e and I_f via condensation of imidazole NH group with CH₂OH group. Similar reactions of 3,3′‐diaminobenzidine with α,ω‐diols, HO(CH₂)_mOH (m = 4–10), in a 1 : 3 molar ratio give the polymers containing [ (CH₂)_m−1 O (CH₂) _m−1 Im ] and [ (CH₂) _m−2 Im ] units with partial cross‐linked structures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1383–1392, 1999     

Characterization of conducting copolymers of 2,2′-bithiophene and pyrrole by cyclic voltammetry and UV/visible spectroscopy

Several polymers have been prepared by electropolymerization of mixtures of pyrrole (PY) and 2,2′-bithiophene (BT). Cyclic voltammetry on prepared polymer films shows three anodic oxidation peaks, two of which match the oxidation potentials of homopolymeric PY and BT, and a third which is intermediate. UV/visible spectroscopy displays a unique spectrum for each of the reduced and oxidized forms of these polymers. Nernstian plots from UV/visible data exhibit three well-defined redox couples in polymer films produced at 1.3 V. Overall, the data strongly support the formation of a copolymer, consisting of three distinct oxidizable units. Two of these can be attributed to short blocks of either PY or BT, and a third to random and alternate groupings of PY and BT. The polymers produced are electrically conductive, but the conductivity drops rapidly as BT units are introduced into a homopolymer of PY. © 1992 John Wiley & Sons, Inc.