High critical current density YBa2Cu3O7−δ tapes prepared by the surface-oxidation epitaxy method

YBa₂Cu₃O_7−δ (YBCO) films with high critical current density (J_c) were successfully fabricated on nickel tapes buffered with epitaxial NiO. NiO was prepared on the textured nickel tape by the surface-oxidation epitaxy (SOE) method. We have reported so far a critical temperature (T_c) of 87 K and J_c=4–6×10⁴ A/cm² (77 K, 0 T) for the YBCO films on NiO/Ni tapes. To enhance the superconducting properties of the YBCO films on the SOE-grown NiO, depositions of thin oxide cap layers such as YSZ, CeO₂, and MgO on NiO were investigated. These oxide cap layers were epitaxially grown on NiO and provided the template for the epitaxial growth of YBCO films. Substantially improved data of T_c=88 K and J_c=3×10⁵ A/cm² (77 K, 0 T) and 1×10⁴ A/cm² (77 K, Hc, 4 T) were obtained for YBCO film on NiO, by using a MgO cap layer with a thickness of 50 nm. The method described in this paper is a simple way to produce long YBCO tape conductors with high-J_c values.     

Fabrication, microstructure and critical current density of screen-printed Ag-(Bi, Pb)2Sr2Ca2Cu3Ox superconducting tapes

The influence of the sintering conditions on the microstructure and critical current density J_c has been studied on screen-printed Ag-(Bi, Pb)₂Sr₂Ca₂Cu₃O_x tapes with a ceramics mono-layer core. Three kinds of fabrication processes, which consist of a combination of cold working (rolling and/or pressing) and sintering, are applied. Four times repetition of pressing and sintering after the pre-sintering produces the highest c-axis alignment and achieves J_c= 1.5 × 10⁴ A/cm² (77 K, 0 T). The J_c versus θ data with an angle θ between B and the c-axis elucidate the relation between the anisotropy ratio γ=J_c(Bc)/J_c(B|c and the half-height angular width Δθ of a peak for Bc. This is related to both grain alignment and the J_c value. An increase in J_c, which comes from an improvement for grain alignment, enhances γ and narrows Δθ. The J_c versus θ data are fitted to the expression J_c(B, θ)=J _c(B, 90°)/[(γ−1)|cos θ|ⁿ+1] by regarding both γ and n as adjustable parameters. Fabrication of screen-printed tapes with multilayers (1≤N≤5) is presented, where the critical current increases from 8.0 A to 30.2 A at 77 K and 0 T as N increases.     

Laser ablated bismuth cuprate thin films preparation and effect of oxygen nonstoichiometry upon superconductivity

Thin films of Bi₂Sr₂CaCu₂O₈ and (Bi, Pb)₂Sr₂Ca₂Cu₃O₁₀ have been prepared on monocrystalline (100) MgO substrates, using a laser ablation method with post annealing treatment. The influence of substrate temperature and oxygen pressure during deposition were investigated. SEM observations, EDS analysis, electric and magnetic measurements have been used to characterize the films. Superconducting “2212” films, with T_c(R = 0) at 80–83 K and J_c (50 K) up to 5 × 10⁵ A/cm², have been currently achieved, while Pb-doped “2223” films exhibit T_c as high as 110 K with J_c = 5 × 10⁴ A/cm² at 77 K. The effect of annealing at low temperature (350°C) in an argon flow has been studied for the 2212 phase, it shows the influence of the oxygen non-stoichiometry, i.e. of the hole carrier density upon T_c's which can be measured up to 89 K (zero resistance).     

Reversible H2 passivation of Si ≡ Si3 interface defects in (1 1 1)Si/SiO2

K-band electron spin resonance (ESR) at 4.3 K has revealed the dipole-dipole (DD) interaction effects between [1 1 1]P_b centers (^*Si ≡ Si₃ defects with unpaired sp³ hybrid [1 1 1]) at the 2 dimensional (1 1 1)Si/SiO₂ interface. This has been enabled by the perfectly reversible H₂ passivation of P_b, which affects the defect's spin state. Sequential hydrogenation at 253–353°C and degassing treatments in high vacuum at 743–835°C allowed to vary the P_b density in the range 5 × 10¹⁰ < [P_b] (1.14 ± 0.06) × 10¹³ cm^-2. With increasing [P_b] fine structure doublets are clearly resolved. It is found that (1 1 1)Si/SiO₂ interfaces, dry thermally grown at ≈920°C, naturally comprise a ^*Si ≡ Si₃ defect density — passivated or not — of 1.14 × 10¹³ cm^-2.     

Measurement of the slope parameter for the neutral pion spectrum in KL → πππ decay

The π⁰ spectrum in the K_L⁰ → 3π decay was measured using a wire chambers magnetic spectrometer. In the usual approximation, the matrix element can be expressed as: M² ≈ 1 + 2a₀(M_K/M_π²)(2T_π⁰−T_π⁰max) + a₁(M_K²/M_π⁴)(2T_π⁰−T_π⁰max)². We obtained a₀ = −0.282 ± 0.011 and a₁ consistent with zero.     

Cu NMR study of the superconducting thiospinel Cu1.5Rh1.5S4

The ⁶³Cu NMR Knight shift K and spin-lattice relaxation rate 1/T₁ have been measured to study the thiospinel superconductor Cu_1.5Rh_1.5S₄ from a microscopic viewpoint. K is negative and has a weak dependence on temperature, and the hyperfine coupling constant H_hf^d is estimated to be −52.4 kOe/μ_B. 1/T₁ is proportional to the temperature in the normal state. In the superconducting state, 1/T₁ takes a coherence peak just below T_c, and decreases exponentially well below T_c, from whose temperature dependence the superconducting energy gap has been proved to be close to 2Δ = 3.52k_BT_c given by the BCS theory.     

Zone melting of suspension spun Bi2Sr2Ca1Cu2Ox filament

Zone melting was used to enhance the J_c of suspension spun Bi₂Sr₂Ca₁Cu₂O_x filaments. By controlling the directional solidification of the molten zone, highly orientated textures were produced and a transport critical current density of more than 2 × 10⁴ A/cm² at 77 K, 0 T was achieved.     

The ΔNγ electromagnetic transition form factors GM(q) and GE(q)

A parameter-free, nonperturbative calculation of the ΔNγ electromagnetic transition amplitudes GM*(q2), GE*(q2), and the resonant multipole ratio REM(q2)≡E1+3/2(q2)/M1+3/2(q2) is performed in terms of the well-known nucleon isovector Sachs form factor GMV. Our methods are fully relativistic with conservation of the electromagnetic current guaranteed. We find that GM*(q2) decreases more rapidly than the nucleon dipole form factor when −q21 GeV2/c2 and that REM(q2) remains small even for very high four-momentum transfer implying that the perturbative QCD prediction REM(q2)→1 is purely asymptotic and is valid only for extremely high |q2|.     

Duree de vie et depolarisation par collisions avec l''helium des niveaux 5P3/2 Et 5P1/2 de l''ion Cd

The lifetimes of the Cd⁺ 5²P_3/2 and 5²P_1/2 states have been measured by the Hanle effect. The Cd⁺ ions are produced in a d.c. discharge in cadmium vapor, with helium as buffer gas. The results are: τ(5²P_3/2) = (2.60±0.20) ×10⁻⁹sec, and τ(5²P_1/2) = (3.05 ± 0.13) × 10⁻⁹sec.

We measured also the cross sections for the destruction of the orientation in the 5²P_1/2Cd⁺ state (<5Ų), of the orientation (18±10Ų) and of the alignment (46±10Ų) in the 5²P_3/2 state due to collisions with the helium atoms.     

Effect of unidirectional solidification rate on Jc for current lead

The dependence of transport J_c value on the traveling rate and the nominal composition was investigated by taking different nominal compositions of YBa₂Cu₃O_6+x (Y123) + n mol% Y₂BaCuO₅ (Y211) (n = 10, 20, 30, 40 and 50) with addition of 0.5 wt% of Pt on samples processed by different unidirectional solidification rates, namely 1, 3 and 5 mm/h. The highest J_c was found in the sample with 30% Y211 addition by the higher traveling rate adjusted to prevent the formation of polycrystals. In this φ 1.56 × 60 mm sample the values of transport I_c and J_c were 1370 A and 71 700 A/cm², respectively, which were obtained by the conventional DC four-probe method with criterion of 1 μV/cm at 77 K and self-field.     

Experimental study of the time-dependent rate of K → πππ

The time-dependence of the decay rate of initially pure K⁰ into the final state (π⁺π⁻π⁰) has been studied in search for the decay k_S⁰→π⁺π⁻π⁰. No evidence is found in a sample of 384 observed events. The ratio of the CP -violating K_S⁰ amplitude and the K_L⁰ amplitude is η₊₋₀ = (0.13_−0.20^+0.17) + i(0.17_−0.26^+0.27); the ratio of the CP-conserving K_S⁰ amplitude and the K_L⁰ amplitude is < 0.4. The energy dependence of the K⁰→π⁺π⁻π⁰ matrix element is found to be a₊₋₀ = −0.31 ± 0.03.     

Effective activation energy Ue(T,J,H) in textured Bi1.84Pb0.4Sr2Ca2Cu3Oy silver-clamped thick films

We have measured the resistivity of textured Bi_1.84Pb_0.4Sr₂Ca₂Cu₃O_y silver-clamped thick films as a function of temperature, current density ranging from 10 to 1×10³ A/cm² and magnetic field up to 0.3 T. We find that the effective activation energy U_e follows U_e(T,J,H)=U₀(1−T/T_p)^mln(J_c0/J)H⁻ with m=1.75 for Hab-plane and 2.5 for Hc-axis and =0.76 for Hab and 0.97 for Hc, for the current density regime above 100 A/cm², where T_p is a function of applied magnetic field and current density. This result suggests the effective activation energy U_e be correlated with the temperature, current density and magnetic field. The possible dissipative mechanisms responsible for the temperature, current density and magnetic field dependence of the effective activation energy are discussed.     

Structure determination, magnetic and optical properties of a new chromium(II) thioantimonate, [Cr((NH2CH2CH2)3N)]Sb4S7

The chromium(II) antimony(III) sulphide, [Cr((NH₂CH₂CH₂)₃N)]Sb₄S₇, was synthesised under solvothermal conditions from the reaction of Sb₂S₃, Cr and S dissolved in tris(2-aminoethyl)amine (tren) at 438 K. The products were characterised by single-crystal X-ray diffraction, elemental analysis, SQUID magnetometry and diffuse reflectance spectroscopy. The compound crystallises in the monoclinic space group P2₁/n with a=7.9756(7), b=10.5191(9), c=25.880(2) Å and β=90.864(5)°. Alternating SbS₃³⁻ trigonal pyramids and Sb₃S₆³⁻ semi-cubes generate Sb₄S₇²⁻ chains which are directly bonded to Cr(tren)²⁺ pendant units. The effective magnetic moment of 4.94(6)μ_B shows a negligible orbital contribution, in agreement with expectations for Cr(II):d⁴ in a ⁵A ground state. The measured band gap of 2.14(3) eV is consistent with a correlation between optical band gap and framework density that is established from analysis of a wide range of antimony sulphides.     

Magnetic properties and domain structure of polycrystalline DyFe3

Magnetization σ vs. temperature T was measured from 80 to 700 K in polycrystalline DyFe₃ in a magnetic field H = 10 kOe. From σ = f(T), the Curie temperature was determined. Also, σ was measured vs. H from 0 to 70 kOe at 4.2 K. Magnetization at saturation σ₀ at 4.2 K and the magnetic moment of DyFe₃ were also determined. First observations of domain structure in DyFe₃ are reported. The mean domain with is determined in its dependence on the grain size . The magnetocrystalline anisotropy constant of polycrystalline DyFe₃ is determined as K₁ = -1.2×10⁷ erg/cm³.     

Spectral intensities in the ν1 band of NH3

Intensities have been measured for individual transitions in the Q and R branches of the ν₁ band of NH₃ using a difference-frequency laser spectrometer. The data yield an integrated band strength of S⁰_v=219.36±1.03 cm^-2/MPa at 297 K, corresponding to a transition moment of μ_v = 8.535(20) × 10^-32 C·m, and a Herman-Wallis correction factor, (1 + _jm)², where _j = 0.0209(20). The intensities of a few lines for K 7 were noticeably perturbed by a perpendicular Coriolis interaction with 2ν₄ (E, L = 2), so were excluded from the fit. A small sample of ν₃ band lines occurring in the ν₁ band scans also yields a rough estimate of the ν₃ band intensity with evident irregular perturbations.     

The order of magnetic phase transition in La(Fe1−xCox)11.4Si1.6 compounds

Magnetic transitions in La(Fe_1−xCo_x)_11.4Si_1.6 compounds with x=0–0.08, have been studied by DC magnetic measurements and Mössbauer spectroscopy. The temperature dependence of the Landau coefficients has been derived by fitting the magnetization, M(μ₀H), using the Landau expansion of the magnetic free energy. For x0.02 there is a strongly first-order magnetic phase transition between ferromagnetic and paramagnetic (F–P) states in zero external field and a metamagnetic transition from paramagnetic to ferromagnetic (P–F) above T_c. Increasing the cobalt content drives the F–P transition towards second order and eliminates the metamagnetic transition.     

Magnetic properties of the Bi1.95Sr2.05−xLaxCuOy (Bi-2201) superconducting phase

We have investigated the reversible mixed-state magnetization M of three lanthanum substituted Bi_1.95Sr_2.05−xLa_xCuO_y (Bi-2201) ceramic samples having different critical temperatures T_c ranging from 20.0 to 35.5 K. As for the Bi₂Sr₂CaCu₂O_8+δ (Bi-2212) phase, we found that anisotropy of Bi-2201 is large. A manifestation of this anisotropy is the field independent magnetization M^* observed at a temperature T^*. In the framework of the London model, and including thermal fluctuations of vortices, we found for the temperature dependence of the penetration depth λ_ab(T) = λ_ab(0)[1 − (T/T_c0)ⁿ]^−1/2, with n 1.7 and λ_ab (T = 0) 4000 Å. The estimated upper critical fields μ₀H_c2,c are of the order of 10 T. We observe a peculiar negative slope M/T at low temperature and sufficiently high external magnetic field. This feature seems to be a characteristic of the Bi-2201 phase. However, we do not know whether it is associated with the superconducting mixed-state. A small amount of magnetic impurities could also be responsible for this behavior. Finally, the behavior of the reversible magnetization of the Bi-2201 samples investigated, which are situated at the optimal and in the overdoped region, did not indicate any unusual temperature dependence for the upper critical field H_c2,c.     

Field induced flux pinning in Nd1+xBa2−xCu3O7−δ single crystal

The flux pinning behavior of a Nd_1+xBa_2−xCu₃O_7−δ (Nd123) single crystal, which exhibited a peak effect, has been studied by monitoring the time decay of the magnetic moment. The apparent pinning energy (U₀^*) was deduced from flux creep data on the basis of the Anderson-Kim model. The magnetic field dependence of U₀^* showed maxima at peak fields which depended on the temperatures, in a similar manner to those of critical current densities. In addition, the temperature dependence of U₀^* showed several features. To explain the increase in U₀^* with the field as well as its temperature and field dependence, we made a numerical calculation by introducing an additional pinning energy which increased with increasing field. The results are in good agreement with the experimental data, especially at temperatures above 60 K, where the contribution of field induced pinning centers is believed to be dominant.     

Magnetisation reversal in low-coercivity PrFeB materials

Models proposed to analyse magnetisation reversal in high-coercivity magnets should, in principle, apply to low-coercivity materials. Magnetisation reversal in low-coercivity PrFeB (μ₀H_c≈0.1 T at 4.2 K) is examined in the present paper within the so-called global model. For such low-μ₀H_c values, pinning is expected to occur. The parameters deduced from the analysis are consistent with this process. As expected from simple considerations on magnetisation reversal processes, the activation volume, v_a, is larger in low-coercivity PrFeB than in high-coercivity magnets. The quantitative analysis shows, however, that the reversal mechanisms are not identical.     

Magnetic phase transition in (Ba, Sr)Fe12O19 single crystals

The critical exponents β, γ and δ of single crystals of hexagonal ferrites BaFe₁₂O₁₉ and SrFe₁₂O₁₉ were determined from modified Arrott plots, scaling plots, ln(J) versus ln(μ₀H) plots and the method of Kouvel and Fisher. The results resemble those of the strong anisotropic ferromagnet Nd₂Fe₁₄B. Crossover effects are discussed by estimating the ranges within which dipolar and anisotropic interactions dominate, and by analyzing the temperature-dependent exponents β(T) and γ(T). In addition, the λ-line was determined from measurements in the hard direction, and the critical exponent ω was fitted.