Coulometric titration of penicillins and penicillamine with mercury(II)

An absolute coulometric method based on the titration of hydrolysed penicillins with coulometrically generated mercury(II) is presented. An amalgamated gold plate is used as anode and the titration is performed in a pH 4.6 acetate buffer solution. The method gives values which deviate by less than 1% from values obtained by other absolute methods. The relative standard deviation for determination of penicillin G is 0.4%. The determinations of penicillamine and mixtures of penicillamine and penicilloate are also reported.     

Liquid chromatographic determination of penicillins by postcolumn degradation with sodium hypochlorite using an hollow-fibre membrane reactor

A sensitive, high-performance liquid chromatographic method involving postcolumn degradation with sodium hypochlorite and using a hollow-fibre membrane as a reactor is described for the determination of penicillins. Penicillins were separated on a C18 column followed by postcolumn reaction with sodium hypochlorite and sodium hydroxide using aminated and sulphonated hollow-fibre membrane reactors immersed in each solution, and detected at 270-280 nm based on the UV absorbances of the degradation products. At penicillin concentrations of 2 micrograms/ml, the precisions (relative standard deviation) were 2.28-4.78%. The detection limits of the proposed method were 2.5-25 ng for each penicillin at a signal-to-noise ratio of 3. Ampicillin and its metabolites [(5R,6R)-ampicilloic acid, the (5S,6R)-epimer and (2R)-pierazine-2',5'-dione] in human serum and urine were simultaneously determined by this method.     

Titration of 6-aminopenicillanic acid with mercury (II) solution.

A simple, absolute method for the determination of 6-aminopenicillanic acid (6-APA) is described. The method involves two titrations with mercury(II) nitrate solution at pH 4.8, the first on an untreated solution and the second on a solution which has been acetylated, alkali-hydrolysed, and neutralized. The first titration accounts for the degradation products of 6-APA; the second titration gives the sum of these products and the intact 6-APA in the sample. The method is rapid and accurate.     

A flow-injection system based on immobilized penicillinase and a linear pH-buffer for potentiometric determination of penicillin

Penicillin is determined in a flow-injection manifold by hydrolysis of the β-lactam ring by means of an on-line reactor containing immobilized penicillinase with detection of the produced acid by a glass electrode. The penicillin concentration is calculated as the difference in response between a sample passing through the enzyme reactor and a sample flowing directly to the glass electrode. The pH signal is made linearly dependent on the acid concentration by using a buffer mixture of constant buffer capacity and the reactor is designed so that hydrolysis of the penicillin is essentially complete in the reactor. The linear range is 0.1–15 mM penicillin and the sensitivity is 0.056 pH mM^?1. The sample throughput is 60 h^?1 and the relative standard deviation < 1%. The proposed method is primarily intended for the analysis of purified potassium salts of penicillins in pharmaceutical preparations.     

Spectrodensitometric Analysis of Penicillins by Detection with Iodine

Abstract

A rapid, sensitive and selective method is described for the determination of some penicillin derivatives and their additive and degradation products in the presence of each other. Penicillin derivatives are separated from their degradation and additive products on high performance thin layer silica gel G plates. The plates were developed in a linear chamber, air dried, exposed to iodine vapour and measured on a spectrodensitometer at 290 nm. Procaine and procaine penicillin are measured at 360 nm. The results of the analysis show good agreement with the method of the USP XXI. For the reaction of penicillins with iodine, the formation of charge-transfer complexes is considered.     

Hydrolytic stability of a series of lactam-based cationic bleach activators and their impact on cellulose peroxide bleaching

A series of five cationic bleach activators containing lactam-based leaving groups of varying ring size was synthesized and characterized. The hydrolytic stability of each activator was determined via HPLC-based analysis of hydrolysis products, titration of available oxygen, and whiteness assessment of cellulosic fibers using a peroxide-activator bleaching system following solution storage for various times under controlled conditions. Aqueous alkaline solutions of each activator hydrolysed at different rates with the slowest rates observed with the ω-octalactam ring system, the largest ring size investigated, and the most rapid hydrolysis was found with a six-membered lactam ring based activator. The whiteness of cotton bleached with stored bleach activator solutions inversely correlated with the hydrolysis rate for each activator. The hydrolysis rate followed pseudo first order kinetics.     

Anodic Polarographic Behaviour of Hydrolyzed Penicillin V

Abstract

The electroactivity of a degradation product from penicillin V is described. This electroactive product is formed by acidic hydrolysis at pH 4.0 and heating at 90°C for 60 minutes.

This derivative has not been identified, but would seem to contain a thiol group. It gives a diffusion controlled anodic polarographic wave with a peak potential of -0.204 V versus SCE at pH 4.0.

The developed method has been applied to the analysis of penicillin V dosage forms and a recovery of 100.8 has been obtained.     

高效毛细管电泳法检测牛奶中的青霉素中间体以及3种青霉素类药物

建立了高效毛细管电泳(HPCE)同时检测牛奶中青霉素类抗生素中间体6-氨基青霉烷酸(6-APA)以及3种青霉素类药物青霉素钾(PEN)、氨苄青霉素(AMP)和阿莫西林(AMO)的方法。利用正交实验设计,对HPCE中的缓冲液离子浓度和pH值、分离电压、分离温度等分离条件进行了优化。结果表明: 在采用40 mmol/L磷酸二氢钾-20 mmol/L硼砂缓冲体系(pH 7.8)、分离电压为28 kV、分离温度为30 ℃的电泳条件下,4.5 min内可以实现上述4种青霉素类药物的快速分离检测。各组分在1.56～100 mg/L范围内有良好的线性,相关系数(r2)为0.9979～0.9998,加标回收率为84.91%～96.72%,相对标准偏差(RSDs)为1.11%～9.11% (n=6)。该方法简便、快速,可以应用于市售牛奶中4种青霉素类药物的快速检测。     

Rapid assay for procaine penicillin G in pharmaceutical dosages by spectrofluorimetry

A method for the spectrofluorimetric determination of procaine penicillin G is proposed (lambda(ex) = 294 nm, lambda(em) = 348 nm) for concentrations between 0.10 and 1.0 ppm. The method was performed in ethanol/water medium (60% V/V), at apparent pH 9.9 provided by adding ammonium/ammonia buffer solution with pH = 10.0. The effect of other penicillins on the determination of procaine penicillin G was examined over a wide range of concentrations, interferences were not observed in the range of studied concentrations. The method was successfully applied to assay all Spanish commercialized injections containing procaine penicillin G, penicillin G and/or benzathine penicillin G.     

Determination of penicillin G in bovine plasma by high-performance liquid chromatography after pre-column derivatization.

A simple, selective, and sensitive liquid chromatographic method with ultraviolet detection was developed for the analysis of penicillin G in bovine plasma. The assay utilizes a simple extraction of penicillin G from plasma (with a known amount of penicillin V added as internal standard) with water, dilute sulphuric acid and sodium tungstate solutions, followed by concentration on a conditioned C18 solid-phase extraction column. After elution with 500 microliters of elution solution, the penicillins are derivatized with 500 microliters of 1,2,4-triazole-mercuric chloride solution at 65 degrees C for 30 min. The penicillin-mercury mercaptide complexes are separated by reversed-phase liquid chromatography on a C18 column. The method, which has a detection limit of 5 ng/ml (ppb) in bovine plasma, was used to quantitatively measure the concentrations of penicillin G in plasma of steers at a series of intervals after the intramuscular administration of a commercial formulation of procaine penicillin G.     

An HPLC study of tinidazole hydrolysis

Summary The high-performance liquid chromatographic (HPLC) method herein described allows the simultaneous determination of the hydrolysis kinetics of tinidazole and the formation kinetics of the hydrolysis products. Tinidazole is easily hydrolysed under basic conditions at raised temperature. The rate varies with the pH and the temperature of the solution, and the decomposition follows apparent first-order kinetics. The Arrheinius equation can be used to describe the effect of temperature on the half-life.     

Liquid chromatographic determination of ampicillin residues in porcine muscle tissue by a multipenicillin analytical method: European Collaborative Study

A collaborative study involving 14 laboratories was conducted to determine residues of ampicillin in porcine muscle tissue by using a liquid chromatographic method developed for multipenicillin analysis that can quantitate 8 penicillin compounds (benzylpenicillin, phenoxymethylpenicillin, ampicillin, amoxicillin, nafcillin, oxacillin, cloxacillin, and dicloxacillin) at trace levels in muscle tissue. This method involves extraction of the penicillins with phosphate buffer, pH 9, followed by cleanup and concentration on a C18 solid-phase extraction column and reaction with benzoic anhydride at 50 degrees C and with 1,2,4-triazole and mercury(II) chloride solution, pH 9.0, at 65 degrees C. The derivatized compounds are eluted isocratically on a C8 column with a mobile phase of acetonitrile and phosphate buffer (pH 6; 0.1 M) containing sodium thiosulfate and the ion-pair reagent tetrabutylammonium hydrogen sulfate. The penicillins are detected by UV absorption at 325 nm. The limit of detection and the limit of determination (quantitation) of the method were calculated to be approximately 3-5 and 25 microg/kg, respectively, in accordance with the criteria of European Union (EU) Decision No. 93/256/EEC. In this first interlaboratory study, collaborators were instructed to monitor 4 different penicillin compounds (benzylpenicillin, phenoxymethylpenicillin, ampicillin, and amoxicillin) by analyzing 8 blind samples of muscle tissue in triplicate. These samples were prepared from 2 materials containing different concentrations of incurred ampicillin (63.5 microg/kg for material No. 1 and 358.1 microg/kg for material No. 2) and 1 blank material. The repeatability relative standard deviation and the reproducibility relative standard deviation were 10.2 and 17.4%, respectively, for material No. 1 and 7.0 and 16.0%, respectively, for material No. 2. These results demonstrate that the method is suitable for the determination of ampicillin residues in muscle tissue at the EU maximum residue limit (50 microg/kg) and above. However, the identification of positives by this procedure may need additional confirmation by techniques with greater specificity, such as liquid chromatography combined with mass spectrometry, or tandem mass spectrometry. Investigations regarding the basis of interlaboratory testing studies will further demonstrate the suitability of multiresidue methodology for detecting and quantitating other compounds in the family of penicillin antibiotics.     

Multiresidue analytical method for the determination of eight penicillin antibiotics in muscle tissue by ion-pair reversed-phase HPLC after precolumn derivatization.

A high-performance liquid chromatographic multiresidue method was developed for the determination of 8 penicillin compounds (benzylpenicillin, phenoxymethylpenicillin, ampicillin, amoxicillin, nafcillin, oxacillin, cloxacillin, and dicloxacillin) at trace levels in muscle tissue. This method involves extraction of the penicillins with phosphate buffer pH 9 followed by cleanup and concentration on a C18 solid-phase extraction column and reaction with benzoic anhydride at 50 degrees C for 5 min and with 1,2,4-triazole and mercury(II) chloride solution pH 9 at 65 degrees C for 10 min. The derivatized compounds are eluted on a C8 column with a mobile phase containing acetonitrile and phosphate buffer (pH 6; 0.1 mol/L) loaded with sodium thiosulfate and ion-pairing tetrabutylammonium hydrogenosulphate. The method detection limit is approximately 3-11 micrograms/kg and the limit of determination was evaluated down to 25 micrograms/kg in line with the criteria of the EU decision No. 93/256/EEC.     

Application of solid-phase extraction and micellar electrokinetic capillary chromatography to the study of hydrolytic and photolytic degradation of phenoxy acid and phenylurea herbicides

A degradation study of two phenoxy acid [(2,4-dichlorophenoxy) propanoic acid and (2,4,5-trichlorophenoxy) acetic acid] and two phenylurea (diuron and monolinuron) herbicides, spiked at 50 ppb in water, was performed. Some samples were subjected to neutral and basic hydrolysis; other samples were subjected to photolysis using either sunlight or a xenon arc lamp. After degradation, the water samples were preconcentrated using solid-phase extraction (SPE) with Carbopack B columns and analysed by a micellar electrokinetic capillary chromatography (MECC) system with UV detection at 210 nm. Phenoxyacetic acids were not degraded neither by hydrolysis nor by sunlight photolysis, but they were photodegraded when they were exposed to a xenon arc lamp, with half-lives around 300 min. Phenylurea herbicides were hydrolysed at the two-tested pH, with half-lives varying from 25 to 290 days. The main hydrolysis products were the corresponding chloroanilines. Diuron and monolinuron were also degraded when they were exposed to sunlight and xenon arc lamp. The main photodegradation pathway for diuron corresponded to dehalogenation, while for monolinuron dealkylation and hydroxylation were also postulated. The toxicity of the studied herbicides and their degradation products was evaluated by means of Microtox tests. The obtained results indicated that the toxicity of the degraded samples was higher than the toxicity of the herbicides.     

Spectrophotometric method for assay of penicillins

Ninhydrin in 0.2M citrate buffer (pH 5) containing SnCl₂ is proposed as a new reagent for Spectrophotometric determination of penicillins and analysis of their pharmaceutical formulations. The method is based on acid hydrolysis of penicillins with 5M HCl and subsequent treatment with ninhydrin. The resulting violet colour exhibits maximum absorption at 570 nm.     

Direct titrations of antibiotics with iodate solution: Part 1. Titration of some selected penicillins

The direct titration of penicillins with potassium iodate solution in strongly acidic conditions is feasible. Two end-point techniques are available: the conventional chloroform extraction technique used in iodimetric titrations, is compared with the irreversible indicator, amaranth, which is used in entirely aqueous systems. Results are presented for the determination of penicillin G, ampicillin sodium, and cloxacillin sodium. An oxidation mechanism is proposed.     

Development and validation of a reversed phase HPLC method for quantitative analysis of bis-isoxazolylnaphthoquinone

The goal of this study was to determine the kinetic parameters involved in the decomposition of 2-(5-methyl-4-isoxazolylamino)-N-(5-methyl-4-isoxazolyl)-1,4-naphthoquinone-4-imine (1) in aqueous solution and to identify the main degradation products. An isocratic HPLC assay was used to study the degradation rate of 1. The products of hydrolysis were identified by comparison of their retention times with those of authentic samples. The amount of 1 and the two degradation products resulting from storage of 1 in various buffer solutions was followed in function of time by a reversed-phase HPLC stability-indicating method. The observed degradation rates followed pseudo-first-order kinetics at constant pH, temperature and ionic strength. The log k–pH-profile was constructed at 35°C from the first-order rate constants obtained from studies at pH values ranging from 0.88 to 10.80 (μ=0.5 M). Hydrolysis in the acidic and alkaline media resulted in the formation of two degradation products in each case. The pH-rate profile of 1 in buffer solution was adequately described using a four-term rate equation. The obtained pH-rate profile indicated specific acid–base catalysis with a region of maximum stability between pH 6.40 and 7.40 which can be adequate for formulations of 1.     

Oxidized haematoxylin,a new reagent for the spectrophotometric determination of penicillins and cephalosporins

Haematoxylin—Chloramine-T in phosphate buffer (pH 7.0) is proposed as a new reagent for spectrophotometric determination of penicillins and cephalosporins in pure samples and pharmaceutical preparations. The method is based on acid hydrolysis of penicillins and cephalosporins with 5M HCl and subsequent treatment with oxidized haematoxylin. The resulting colour exhibits maximum absorption at 555 nm.     

An Improved Spectrophotometric Method for Determination of Penicillins Alone and in Pharmaceutical Dosage Forms

Abstract

A new spectrophotometric method for determining penicillins has been developed. A known volume of the penicillin solution is heated at 95[ddot]C for 70 min with ammonium molybdate, in sulphuric acid medium and the absorbance of the blue species formed is measured at 670 nm. The method has been successfully applied for the determination of thirteen commercially available penicillins. Beer's law is valid for up to 35-90 μg/ml of antibiotic (according to the penicillin). The procedure has been used for analysing some pharmaceutical preparations for these drugs, e.g., injections and capsules. The sensitivity of the method is largely increased with respect to the vanadate method previously described.     

Studies on the Photolytical Behaviour of Bromofenoxim in the Atmosphere

Abstract

Photodecomposition of the herbicide bromofenoxim was studied in aqueous solution, solid state and in aerosol form. In all cases, bromoxynil and 2,4-dinitrophenol are the degradation products. Photodecomposition rate in solution is strongly dependent on the pH with a minimum at pH 8-10 and increasing at lower and higher pH values. Hydrolysis at pH 12 in darkness also yields 2,4-dinitrophenol and bromoxynil as products, while hydrolysis in acidic medium has not been observed to occur in absence of light. Photodecomposition of solid bromofenoxim deposited on an inert surface is also studied and linked to the irradiation time. A system for generation of test aerosols is described. Dry and droplet aerosols are collected, extracted and analyzed after different times of irradiation in order to study the possible photolytical behaviour of bromofenoxim in the atmosphere.