Pt(II)-catalyzed synthesis of 1,2-dihydropyridines from aziridinyl propargylic esters

Pt(II)-catalyzed cycloisomerization of aziridinyl propargylic esters affords 1,2-dihydropyridines with regiodefined installation of substituents. A mild conversion of the 1,2-dihydropyridines to the corresponding substituted pyridines as well as chirality retention from the aziridinyl propargylic ester substrates have been demonstrated.     

Synthesis and properties of 3-cyano-4-(4-cyanophenyl)-1,4-dihydropyridine-2(3H)-thiones

Piperidinium 3-cyano-4-(4-cyanophenyl)-1,4-dihydropyridine-2(3H)-thiolates were obtained by the condensation of 1,3-dicarbonyl compounds, 4-cyanobenzaldehyde, and cyanothioacetamide in the presence of an equimolar amount of piperidine. The acidification of these thiolates gave the corresponding 1,4-dihydropyridine-2(3H)-thiones and pyridine-2(1H)-thione. Alkylation of 1,4-dihydropyridine-2-thiolates or the reaction mixture of the three-carbon condensation using iodacetamide gave 2-carbamoylmethylthio-1,4,5,6-tetrahydro- or 1,4-dihydropyridines, which were characterized by their conversion to 4,7-dihydrothieno[2,3-b]pyridines.Latvian Institute of Organic Synthesis, LV-1006, Riga, LatviaTranslated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 794–798, June, 2000.     

n-Butyl by-products in the syntheses of 2-(1- and 2-naphthyl)pyridines via lithiation

By-products in the syntheses of 2-(1- and 2-naphthyl)pyridines by successive treatments of 1- and 2-bromonaphthalenes with (a) n-butyllithium in ether and (b) pyridine are identified as 5-butyl-2-(1-naphthyl)pyridine and, tentatively, 5-butyl-2-(2-naphthyl)pyridine, respectively. It is proposed that these by-products result from reaction of intermediate compounds 1-lithio-2-naphthyl-1,2-dihydropyridines and 1-bromobutane.     

Total synthesis of (-)-cocaine and (-)-ferruginine

Total synthesis of tropane alkaloids (-)-cocaine and (-)-ferruginine were accomplished in nine steps each and in 55% and 46% overall yields, respectively, starting from the known Betti base derivative (+)-(7aR,10R,12S)-10-(1H-benzotriazol-1-yl)-7a,8,9,10-tetrahydro-12-phenyl-12H-naphtho[1,2-e]pyrrolo[2,1-b][1,3]oxazine. In this novel route, RCM reaction and 1,3-dipolar cycloaddition were employed as key steps for the enantioselective construction of tropane skeleton and the regioselective introduction of 3-bromo-2-isoxazoline ring as masked cis-2,3-disubstituents. To obtain the desired precursor (2S,5R)-2-allyl-5-vinylpyrrolidine for RCM reaction, we developed a general and practical method for the preparation of enantiopure cis-2,5-disubstituted pyrrolidines bearing alkene- and/or alkyne-containing substituents. We also offered two highly efficient pathways for the conversion of the 3-bromo-2-isoxazoline ring into the desired cis-2,3-disubstituted groups in (-)-cocaine and (-)-ferruginine.     

Directed deprotonation-transmetalation as a route to substituted pyridines

Regioselective C-4 deprotonation of 3-bromopyridine, followed by Li/Zn transmetalation and Pd-mediated coupling processes, provides a flexible entry to 4-substituted and 3,4-disubstituted pyridines. Application of a similar sequence to 2-bromopyridine (with LDA as base) provides 2,3-disubstituted pyridines, but using lithium 2,2,6,6-tetramethylpiperidide (LiTMP) provides access to both the 2,3- and 2,4-disubstituted isomers.     

Synthesis and transformations of 3-(1H-pyrrol-1-yl)thieno[2,3-b]pyridines

Reactions of 2,5-dimethoxytetrahydrofuran with 3-aminothieno[2,3-b]pyridines afford a number of substituted 3-(1H-pyrrol-1-yl)thieno[2,3-b]pyridines. The possibility of the reaction and the yield of the product are determined by the character of a substituent in position 2 of thieno[2,3-b]pyridine. The Curtius rearrangement of 2-acylazido-3(1H-pyrrol-1-yl)thieno[2,3-b]pyridines yields 4,5-dihydropyrido[3",2":4,5]thieno[2,3-e]pyrrolo[1,2-a]pyrazin-4-ones. The molecular and crystal structures of ethyl 4-methoxymethyl-6-methyl-3-(1H-pyrrol-1-yl)thieno[2,3-b]pyridine-2-carboxylate were determined by X-ray diffraction analysis.     

Synthesis and molecular structure of 3-(2-aryl-2-oxoethyl)-3-methoxy-2-oxo-2,3-dihydroimidazo-[1,2-<Emphasis Type="Italic">a</Emphasis>]pyridine hydrochlorides

Reactions between 2-pyridylamides of Z-4-aryl-2-hydroxy-4-oxobut-2-enoic acids with diazomethane have been used to synthesize 3-(2-aryl-2-oxoethyl)-3-methoxy-2-oxo-2,3-dihydroimidazo[1,2-a]pyridines, which form hydrochlorides with hydrochloric acid. The structure of the latter has been demonstrated by XRD for the hydrochloride of 3-methoxy-2-oxo-3-(2-phenyl-2-oxoethyl)-2,3-dihydroimidazo[1,2-a]pyridine. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 464–468, 2007.     

Synthesis and easy aromatisation of 5-substituted 6-(alkylthio)-2-methoxy-2,3-dihydropyridines. A new approach to the pyridine ring

Reaction of lithiated methoxyallene, 1-ethoxyethoxyallene, 1-(methylthio)propyne and 2-butyne with methoxymethyl isothiocyanate, MeOCH₂N=C=S followed by methylation affords the imidothioates H₂C=C=C(R)C(SMe)=NCH₂OMe [R=Me, OMe, OCH(Me)OEt, SMe]. Rearrangement to the fully conjugated systems H₂C=CH---C(R)=C(SMe)---N=CHOMe and subsequent electrocyclisation of these compounds leads to the 5-substituted 6-(methylthio)-2-methoxy-2,3-dihydropyridines with good to excellent yields. In the presence of acidic catalysts or by heating at elevated temperatures these dihydropyridines eliminate methanol to afford 3-substituted 2-(methylthio)pyridines. The aroma compound 2-(methylthio)-3-pyridinol was obtained by acid-catalysed treatment of 3-(1-ethoxyethoxy)-2-(methylthio)pyridine.     

Palladium-catalyzed regioselective silaboration of pyridines leading to the synthesis of silylated dihydropyridines

The addition of silylboronic esters to pyridine takes place in toluene at 50 °C in the presence of a palladium catalyst to give N-boryl-4-silyl-1,4-dihydropyridines in high yield. The regioselective 1,4-silaboration also proceeds in the reaction of 2-picoline and 3-substituted pyridines, whereas 4-substituted pyridines undergo 1,2-silaboration to give N-boryl-2-silyl-1,2-dihydropyridines regioselectively.     

Diverse reactions of 1,4-dilithio-1,3-dienes with nitriles: facile access to tricyclic Delta1-bipyrrolines, multiply substituted pyridines, siloles, and (Z,Z)-dienylsilanes by tuning of substituents on the butadienyl skeleton

Addition cyclization of 1,2,3,4-tetrasubstituted 1,4-dilithio-1,3-dienes (Type I) with four equivalents of various aromatic nitriles in the presence of hexamethylphosphoramide (HMPA) gives exclusively fully substituted pyridines in moderate to good yields. Similarly, trisubstituted pyridines can be prepared by the reaction of 2,3-dialkyl- or diaryl-substituted 1,4-dilithio-1,3-dienes (Type II) with nitriles. However, five- or six-membered-ring fused 2,3-disubstituted 1,4-dilithio-1,3-dienes (Type III) reacted with various aromatic and aliphatic nitriles without alpha-hydrogen atoms to afford tricyclic Delta1-bipyrrolines in high yields. The reaction of six-membered-ring fused 2,3-disubstituted 1,4-dilithio-1,3-diene (Type III) with 2-cyanopyridine afforded the corresponding pyridine, and no tricyclic Delta1-bipyrroline was observed. Seven-membered-ring fused dilithiodienes reacted with PhCN or trimethylacetonitrile to afford the corresponding pyridines in good yield. When 1,2,3,4-tetrasubstituted dilithio reagents (Type I) were treated with Me3SiCN, a tandem silylation/intramolecular substitution process readily occurred to yield siloles, whereas the reaction of 2,3-disubstituted dilithio reagents (Types II and III) with Me3SiCN gave rise to (Z,Z)-dienylsilanes with high stereoselectivity. These results revealed that the formation of tricyclic Delta1-bipyrrolines, pyridines, siloles, and (Z,Z)-dienylsilanes are strongly dependent on the substitution patterns of the dilithio butadienes and the nature of the nitriles employed.     

Synthesis of 2,3-disubstituted pyrroles and pyridines from 3-halo-1-azaallylic anions.

A new synthesis of 2,3-disubstituted pyrroles and pyridines is described. The reaction of 3-halo-1-azaallylic carbanions, regiospecifically generated from alpha-halogenated ketimines, with omega-iodoazides led to the regiospecific formation of omega-azido-alpha-haloketimines. Treatment of these functionalized imines with tin(II) chloride afforded halogenated five- and six-membered cyclic imines, which were transformed under mild conditions into 2,3-disubstituted pyrroles and pyridines. The stereoselective reduction of 2,3-dialkyl-3-chloro-1-pyrrolines to afford cis-2,3-dialkyl-3-chloropyrrolidines is also reported.     

Copper-catalyzed four-component synthesis of imidazo[1,2-a]pyridines via sequential reductive amination,condensation, and cyclization

A novel and efficient four-component approach for the synthesis of 2,3-disubstituted imidazo[1,2-a]pyridines is described. The copper-catalyzed reductive amination of 2-bromopyridine by sodium azide followed by sequential condensation and cyclization with aldehydes and isocyanides afforded the corresponding imidazo[1,2-a]pyridines in good yields.     

Functionalized sulfur-containing compounds. 13. Synthesis of substituted 3-amino-2-(organylsulfinyl)-and-(organylsulfonyl)thieno[2,3-b]pyridines

A method for the synthesis of substituted 3-amino-2-(organylsulfinyl)thieno[2,3-b]pyridines by the Thorpe—Ziegler intramolecular cyclization of substituted 3-cyano-2-[(organyl-sulfinyl)methylthio]pyridines was proposed. 3-Amino-2-(organylsulfonyl)thieno[2,3-b]pyridines were obtained by reactions of substituted 3-cyanopyridine-2-thiones with chloromethyl organyl sulfones. The reaction intermediates 3-cyano-2-[(organylsulfonyl)methylthio]pyridines were transformed into 3-amino-2-(organylsulfonyl)thieno[2,3-b]pyridines. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 510–515, March, 2006.     

Microwave-assisted synthesis of sterically hindered 3-(5-tetrazolyl)pyridines

Sterically hindered 2,4-disubstituted 3-(5-tetrazolyl)pyridines were efficiently prepared from the corresponding nicotinonitriles using microwave technology.     

Reaction of dihalocarbenes with 2-(benzylideneamino)pyridines. Cyclization of 2-(benzylideneamino)pyridinium dihalomethylids to give 2-aryl-3-haloimidazo[1,2-α]pyridines

Pyridinium dichloromethylids, formed in the reaction of dichlorocarbene with 2-(benzylideneamino)pyridines, undergo intramolecular 1,5-cyclization to give 2-aryl-3-chloroimidazo[1,2-a]pyridines, which undergo partial conversion to 2-aryl-3-chloro-4H-pyrido[1,2-a]pyrimidin-4-ones under the reaction conditions. 2-Aryl-3-bromoimidazo[1,2-a]pyridines and 2-[N-(1-aryl-2,2,2-tribromoethyl)amino]pyridines, respectively, are obtained in the reaction of dibromocarbene and the tribromomethyl onion generated in the reaction of bromoform with potassium hydroxide.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 810–816, June, 1991.     

Electrophilic cyclization of o-acetoxy- and o-benzyloxyalkynylpyridines: an easy entry into 2,3-disubstituted furopyridines

[reaction: see text] 2,3-Disubstituted furo[3,2-b]pyridines, 2,3-disubstituted furo[2,3-b]pyridines, and 2,3-disubstituted furo[2,3-c]pyridines are readily prepared under mild conditions via the palladium-catalyzed cross-coupling of 1-alkynes with o-iodoacetoxy- or o-iodobenzyloxypyridines, followed by electrophilic cyclization by I(2) or by PdCl(2) under a balloon of carbon monoxide.     

Regioselective synthesis of 1,2-dihydropyridines by rhodium-catalyzed hydroboration of pyridines

Pyridine undergoes addition of pinacolborane at 50 °C in the presence of a rhodium catalyst, giving N-boryl-1,2-dihydropyridine in a high yield. The selective 1,2-hydroboration also takes place in the reactions of substituted pyridines. In the reaction of 3-substituted pyridines, 3-substituted N-boryl-1,2-dihydropyridines are formed regioselectively.     

Regioselective addition of titanium enolates to 1-acylpyridinium salts. A convenient synthesis of 4-(2-oxoalkyl)pyridines

Titanium enolates add to the 4-position of 1-phenoxycarbonylpyridinium salts to give 1,4-dihydropyridines; subsequent aromatization provides 4-(2-oxoalkyl)pyridines.     

Stereospecific preparation of (Z)- and (E)-2,3-difluoro-3-stannylacrylic ester synthons and a new, efficient stereospecific route to (Z)- and (E)-2,3-difluoroacrylic esters

[reaction: see text] The (Z)-2,3-difluoro-3-stannylacrylic ester is readily prepared from (Z)-1,2-difluorovinyltriethylsilane via stereospecific stannyl/silyl exchange with KF/(Bu3Sn)2O or Bu3SnCl in DMF at 70 degrees C. The corresponding (E)-2,3-difluoro-3-stannylacrylate is prepared by stereospecific carbonylation of (E)-1,2-difluorovinyl iodide followed by low temperature/in situ stannylation of the resultant (Z)-2,3-difluoroacrylic ester. With Cu(I) iodide and Pd(PPh3)4 catalysis, the (Z)- and (E)-stannylacrylate esters readily couple with aryl iodides and vinyl bromides, as well as 2-iodothiophene, at room temperature to stereospecifically produce the respective (E)- and (Z)-2,3-difluoro-3-aryl substituted acrylic esters or conjugated dienes in high yields.     

Microwave-assisted synthesis and transformations of sterically hindered 3-(5-tetrazolyl)pyridines

Sterically hindered 2,4-disubstituted 3-(5-tetrazolyl)pyridines were synthesized from corresponding nicotinonitriles using microwave technology. 2-Methylnicotinonitriles were converted into the 2-azidomethyl-3-cyanopyridines via 2-hydroxymethyl and 2-chloromethyl derivatives. Intramolecular [3+2] cycloaddition of an heteroaromatic cyano group to side azido group was carried out to form a novel heterocyclic system containing a (tetrazolo)azaisoindole unit. Condensation of the 2-methylnicotinonitriles and aldehydes gave rise to the corresponding 2-vinyl derivatives, which were then transformed into novel heterocyclic system (5,6-dihydrotetrazolo[5,1-f]-1,6-naphthyridine) by intramolecular N-alkylation reaction of tetrazole ring with olefinic fragment. The 3-(5-tetrazolyl)pyridines obtained were alkylated to give the various N- and C-benzyl derivatives as well as acylated to afford the 3-(1,3,4-oxadiazol-2-yl)pyridines in good yields. A majority of above-mentioned reactions was carried out under microwave irradiation.