Synthesis, reactivity, and structural characterization of sodium and ytterbium complexes containing new imidazolidine-bridged bis(phenolato) ligands

A new imidazolidine-bridged bis(phenol) [ONNO]H2 ([ONNO]H2=1,4-bis(2-hydroxy-3,5-di-tert-butyl-benzyl)imidazolidine) was prepared in relatively high yield by Mannish reaction of 2,4-di-tert-butylphenol, formaldehyde, and ethylenediamine in a 2:3:1 molar ratio. Reaction of the bis(phenol) with NaH in THF, after workup, afforded the sodium bis(phenolate) {[ONNO]Na2(THF)2}2.2THF (1) as a dimeric tetranuclear complex in an almost quantitative yield. Reaction of YbCl3 with complex 1 in a 2:1 molar ratio in THF, in the presence of HMPA, produced the desired bis(phenolate) ytterbium dichloride as bimetallic complex [ONNO]{YbCl2(HMPA)}2.2.5C7H8 (2). Complex 2 can be used as a precursor for the synthesis of ytterbium derivatives by salt metathesis reactions. Reaction of complex 2 with NaOiPr in a 1:2 molar ratio in THF led to the formation of bimetallic alkoxide [ONNO]{Yb(mu-OiPr)Cl(HMPA)}2.THF (3). However, the residual chlorine atoms in complex 3 are inactive for the further substituted reaction. Further study revealed that the bulkiness of the reagent has profound effect on the outcome of the reaction. Complex 2 reacted with bulky NaOAr (ArO=2,6-di-tert-butyl-4-methylphenoxo) or NaNPh2 in a 1:2 molar ratio under the same reaction conditions, after workup, to give the ligand redistributed products, (ArO)2YbCl(HMPA)2 (4) and [ONNO]YbCl(HMPA)2 (5) for the former and complexes 5 and (Ph2N)2YbCl(HMPA)2 (6) for the latter. If the molar ratio of complex 2 to NaNPh2 decreased to 1:4, the expected ligand redistributed products [ONNO]YbNPh2(HMPA) (7) and (Ph2N)3Yb(HMPA)2.C7H8 (8) can be isolated in high yields. All of the complexes were well characterized, and the definitive molecular structures of complexes 1-4, 7, and 8 were provided by single-crystal X-ray analysis.     

Bis(imidazolin-2-iminato) rare earth metal complexes: synthesis, structural characterization, and catalytic application

Reaction of anhydrous rare earth metal halides MCl(3) with 2 equiv of 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-imine (Im(Dipp)NH) and 2 equiv of trimethylsilylmethyl lithium (Me(3)SiCH(2)Li) in THF furnished the complexes [(Im(Dipp)N)(2)MCl(THF)(n)] (M = Sc, Y, Lu). The molecular structures of all three compounds were established by single-crystal X-ray diffraction analyses. The coordination spheres around the pentacoordinate metal atoms are best described as trigonal bipyramids. Reaction of YbI(2) with 2 equiv of LiCH(2)SiMe(3) and 2 equiv of the imino ligand Im(Dipp)NH in tetrahydrofuran did not result in a divalent complex, but instead the Yb(III) complex [(Im(Dipp)N)(2)YbI(THF)(2)] was obtained and structurally characterized. Treatment of [(Im(Dipp)N)(2)MCl(THF)(n)] with 1 equiv of LiCH(2)SiMe(3) resulted in the formation of [(Im(Dipp)N)(2)M(CH(2)SiMe(3))(THF)(n)]. The coordination arrangement of these compounds in the solid state at the metal atoms is similar to that found for the starting materials, although the introduction of the neosilyl ligand induces a significantly greater distortion from the ideal trigonal-bipyramidal geometry. [(Im(Dipp)N)(2)Y(CH(2)SiMe(3))(THF)(2)] was used as precatalyst in the intramolecular hydroamination/cyclization reaction of various terminal aminoalkenes and of one aminoalkyne. The complex showed high catalytic activity and selectivity. A comparison with the previously reported dialkyl yttrium complex [(Im(Dipp)N)Y(CH(2)SiMe(3))(2)(THF)(3)] showed no clear tendency in terms of activity.     

Ytterbium(II) complex bearing a diaminobis(phenolate) ligand: synthesis, structure, and one-electron-transfer and epsilon-caprolactone polymerization reactions

The first divalent ytterbium complex supported by a diaminobis(phenolate) ligand, YbL(THF)2.0.5C7H8 (1; THF = tetrahydrofuran), was synthesized in good yield by the amine elimination reaction of Yb[N(SiMe3)2]2(THF)2 with H2L (L = [Me2NCH2CH2N(CH2-2-OC6H2-3,5-But2)2]) in a 1:1 molar ratio. X-ray structural determination shows complex 1 to be a THF-solvated monomer, which adopts a distorted octahedral coordination geometry around the Yb atom. Complex 1 can react with PhNCO and PhCCH, as a single electron-transfer reagent, to give the corresponding reduction coupling product [(YbLOCNPh)(THF)]2.4THF (2) and the alkynide complex YbLCCPh(DME) (3; DME = 1,2-dimethoxyethane). Complexes 2 and 3 have been characterized by X-ray crystal structural analysis. In complex 2, the dianionic oxamide ligand resulting from the reductive coupling of two phenyl isocyanate molecules coordinates to two Yb atoms in a mu,eta4 fashion. Complex 3 has a monomeric structure with a Yb-C(terminal phenylacetynide) bond length of 2.374(3) A. Complex 1 is also a highly efficient catalyst for ring-opening polymerization of epsilon-caprolactone.     

Reduction of carbodiimides by samarium(II) bis(trimethylsilyl)amides-formation of oxalamidinates and amidinates through C-C coupling or C-H activation

The reaction of [Sm{N(SiMe3)2}2(THF)2] (THF=tetrahydrofuran) with carbodiimides RN=C=NR (R=Cy, C6H3-2,6-iPr2) led to the formation of dinuclear SmIII complexes via differing C-C coupling processes. For R=Cy, the product [{(Me3Si)2N}2Sm(micro-C2N4Cy4)Sm{N(SiMe3)2}2] (1) has an oxalamidinate [C2N4Cy4]2- ligand resulting from coupling at the central C atoms of two CyNCNCy moieties. In contrast, for R=C6H3-2,6-iPr2, H transfer and an unusual coupling of two iPr methine C atoms resulted in a linked formamidinate complex, [{(Me3Si)2N}2Sm{micro-(RNC(H)N(Ar-Ar)NC(H)NR)}Sm{N(SiMe3)2}2] (2) (Ar-Ar=C6H3-2-iPr-6-C(CH3)2C(CH3)2-6'-C6H3-2'-iPr). Analogous reactions of RN=C=NR (R=Cy, C6H3-2,6-iPr2) with the SmII "ate" complex [Sm{N(SiMe2)3Na] gave 1 for R=Cy, but a novel C-substituted amidinate complex, [(THF)Na{N(R)C(NR)CH2Si(Me2)N(SiMe3)}Sm{N(SiMe3)2}2] (3), for R=C6H3-2,6-iPr2, via gamma C-H activation of a N(SiMe3)2 ligand.     

Synthesis and molecular structure of piperazidine-bridged bis(phenolate) samarium(II) complex and its reactivity to carbodiimides

The reaction of Sm[N(TMS)(2)](2)(THF)(2) with H(2)L (L = 1,4-bis(2-hydroxy-3-tert-butyl-5-methyl-benzyl)-piperazidine) afforded [SmL(HMPA)(2)](4)·8THF 2 upon treatment with 2 equivalents of HMPA (hexamethyl phosphoric triamide). X-ray crystallographic analysis of 2 reveals a tetrametallic macrocyclic structure, which represents the first example of a crystal structure of a Sm(II) complex stabilized by heteroatom bridged bis(phenolate) ligands. Reduction of carbodiimides RNCNR (R = (i)Pr and Cy) by [SmL](2)(THF) 1, which was formed in situ by the reaction of Sm[N(TMS)(2)](2)(THF)(2) with H(2)L in THF, yielded the Sm(III) complex with an oxalamidinate ligand [LSm{(N(i)Pr)(2)CC(N(i)Pr)(2)}SmL]·THF 3 for (i)PrNCN(i)Pr and the Sm(III) complex with a diamidocarbene ligand [LSm(μ-CyNCNCy)SmL]·5.5THF 4 for CyNCNCy.     

Synthesis and reactivity of perhalogenated acyclic and metallacyclic tantalum(V) phosphoraniminato complexes: discovery of an unexpected ligand coupling reaction to form the novel phosphazenium salt

The reaction of TaCl5 with a single equivalent of Cl3P=NSiMe3 resulted in the isolation of the perhalogenated (phosphoraniminato) tantalum(V) complex TaCl4(N=PCl3) (1). Reaction of 1 with an excess of THF and subsequent cooling produced crystals of TaCl4(N=PCl3)(THF) (1.THF), which possesses a distorted octahedral Ta center with a THF molecule coordinated trans to the phosphoraniminato ligand. The reaction of 1 with the aminophosphoranimine, (Me3Si)2NPCl2=NSiMe3, resulted in a [3 + 1] cyclocondensation reaction to form the metallacyclic complex, TaCl3(N=PCl3)[N(SiMe3)PCl2N(SiMe3)] (2), which contains a TaNPN four-membered ring and a phosphoraniminato ligand (N=PCl3). The analogous [3 + 1] cyclocondensation reaction between (Me3Si)2NPCl2=NSiMe3 and TaCl5 led to the isolation of TaCl4[N(SiMe3)PCl2N(SiMe3)] (3). An attempt to cleave the NPN ligand from the Ta center in 2 via protonolysis with HCl led to an unusual phosphoraniminato ligand coupling reaction to yield the novel phosphazenium salt [N(PCl2NH2)2][TaCl6] (4). All new compounds (1.THF and complexes 1-4) were characterized by single-crystal X-ray diffraction.     

Coordination of a chiral tin(ii) cation bearing a bis(oxazoline) ligand with tetrahydrofuran derivatives

The reaction of SnCl(2) with the lithio derivative of a bis(oxazoline) ligand precursor afforded the enantiomeric chlorostannylene whose chloride ion can be substituted by several neutral or anionic Lewis donors. Abstraction of the chloride ion from the chlorostannylene with silver salts gave the corresponding tetrahydrofuran (THF) complexes of a chiral tin(ii) cation in 1,2-dimethoxyethane (DME) containing THF. That is, the reaction with silver hexafluoroantimonate (AgSbF(6)) afforded the THF complex without interaction with the counteranion. In contrast, reaction with silver triflate (AgOTf) gave the THF complex whose tin center had a pseudo-trigonal bipyramidal structure with two nitrogen atoms of a bidentate ligand and a lone pair at the equatorial positions and one of the oxygen atoms of triflate and an oxygen atom of THF at the apical positions in the solid state. Use of 3-methyltetrahydrofuran (3-MeTHF) instead of THF afforded the 3-MeTHF complexes, where the R-enantiomer of 3-MeTHF predominantly coordinates to the tin center. The previously reported germanium(ii) analogue of the tin(ii) cation indicated a similar enantioselectivity for the coordination of 3-MeTHF on the germanium center.     

Homoleptic lanthanide complexes of chelating bis(phosphanyl)amides: synthesis,structure, and ring-opening polymerization of lactones

Treatment of the bis(phosphanyl)amide (Ph2P)2NH with KH in boiling THF followed by crystallization from THF/n-pentane leads to [K(thf)n][N(PPh2)2] (n = 1.25, 1.5). Reaction of [K(thf)n][N(PPh2)2] with anhydrous yttrium or lanthanide trichlorides in a 3:1 molar ratio afforded homoleptic bis(phosphanyl)amide complexes [Ln[N(PPh2)2]3] (Ln = Y, Er) as large crystals in good yields. [Ln[N(PPh2)2]3] can also be obtained by reaction of the homoleptic bis(trimethylsilyl)amides of Group 3 metals and lanthanides [Ln[N(SiMe3)2]3] (Ln = Y, La, Nd) with three equivalents of (Ph2P)2NH in boiling toluene. The single-crystal X-ray structures of these complexes always show eta 2 coordination of the ligand. Dynamic behavior of the ligand is observed in solution and is caused by rapid exchange of the two different phosphorus atoms. [Ln[N(PPh2)2]3] was used as catalyst for the polymerization of epsilon-caprolactone. Significant differences in terms of correlation of theoretical and experimental molecular weights as well as polydispersities were observed depending on the nature of Ln. On the basis of the crystal structure of the heteroleptic complex [Lu[N(PPh2)2]3(thf)], we suggest that in the initiation step of epsilon-caprolactone polymerization the lactone adds to the lanthanide atom to form a sevenfold coordination sphere around the central atom.     

Lanthanum and alkali metal coordination chemistry of the bis(dimethylphenylsilyl)amide ligand

The coordination chemistry of the bis(dimethylphenylsilyl)amide ligand, [N(SiMe2Ph)2]1-, with sodium, potassium, and lanthanum has been investigated for comparison with the more commonly used [N(SiMe3)2]1- and [N(SiHMe2)2]1- ligands. HN(SiMe2Ph)2 reacts with KH to produce KN(SiMe2Ph)2, 1, which crystallizes from toluene as the dimer [KN(SiMe2Ph)2(C7H8)]2, 2. The structure of 2 shows that the [N(SiMe2Ph)2]1- ligand can function as a polyhapto ligand with coordination from each phenyl group as well as the normal nitrogen ligation and agostic methyl interactions common in methylsilylamides. Each potassium in 2 is ligated by an eta4-toluene, two bridging nitrogen atoms, and an eta2-phenyl, an eta1-phenyl, and an eta1-methyl group. KN(SiMe2Ph)2 crystallizes from toluene in the presence of 18-crown-6 to make the monometallic complex (18-crown-6)KN(SiMe2Ph)2, 3, in which [N(SiMe2Ph)2]1- functions as a simple monodentate ligand through nitrogen. The reaction of HN(SiMe2Ph)2 with NaH in THF at reflux for 2 days generates Na[N(SiMe2Ph)2], 4, which crystallizes as the solvated dimer {(THF)Na[mu-eta1:eta1-N(SiMe2Ph)2]}2, 5. A lanthanide metallocene derivative of [N(SiMe2Ph)2]1- was obtained by reaction of K[N(SiMe2Ph)2] with [(C5Me5)2La][(mu-Ph)2BPh2]. Crystals of (C5Me5)2La[N(SiMe2Ph)2], 6, show agostic interactions between lanthanum and methyl groups of each silyl substituent. The [N(SiMe3)2]1- analogue of 3, (18-crown-6)KN(SiMe3)2, 7, was also structurally characterized for comparison.     

Rare earth metal complexes bearing thiophene-amido ligand: synthesis and structural characterization

2,6-diisopropyl-N-(2-thienylmethyl)aniline (H2L) has been prepared, which reacted with equimolar rare earth metal tris(alkyl)s, Ln(CH2SiMe3)3(THF)2, afforded rare earth metal mono(alkyl) complexes, LLn(CH2SiMe3)(THF)3 (:Ln=Lu; :Ln=Y). In this process, H2L was deprotonated by one metal alkyl species followed by intramolecular C-H activation of the thiophene ring to generate dianionic species L2- with the release of two tetramethylsilane. The resulting L2- combined with three THF molecules and an alkyl unit coordinates to Y3+ and Lu3+ ions, respectively, in a rare N,C-bidentate mode, to generate distorted octahedron geometry ligand core. Whereas, with treatment of H2L with equimolar Sc(CH2SiMe3)3(THF)2, a heteroleptic complex (HL)(L)Sc(THF) () was isolated as the main product, where the dianionic L2- species bonds to Sc3+ via chelating N,C atoms whilst the monoanionic HL connects to Sc3+ in an S,N-bidentate mode. All complexes have been characterized by NMR spectroscopy and X-ray diffraction analysis.     

Triamidotriazacyclononane complexes of group 3 metals. Synthesis and crystal structures

Reaction of yttrium and lanthanide trichlorides (Ln = La, Eu, Yb) with 1 equiv of the trisodium salt of 1,4,7-tris(dimethylsilylaniline)-1,4,7-triazacyclononane (Na(3)[(SiMe(2)NPh)(3)-tacn](THF)(2)) gives good yields of the compounds [M[(SiMe(2)NPh)(3)-tacn]] (M = Y (1), Eu (3), Yb (4)) and [La[(SiMe(2)NPh)(3)-tacn](THF)] (2). Reduction of 3 with Na/Hg followed by recrystallization in the presence of diglyme yielded crystals of [Eu[(SiMe(2)NPh)(3)-tacn]][Na(diglyme)(2)] (5). Synthesis of the uranium(III) complex [U[(SiMe(2)NPh)(3)-tacn]] (6) is achieved by reaction of 1 equiv of Na(3)[(SiMe(2)NPh)(3)-tacn](THF)(2) with uranium triiodide. The U(IV) complexes, [U[(SiMe(2)NPh)(3)-tacn]X] (X = Cl (7); I (8)), were prepared via oxidation of 6 with benzyl chloride or I(2), but salt metathesis from UCl(4) provided a higher yield route for 7. The solid-state structures of 1-7 were determined by single-crystal X-ray diffraction. The ligand [(SiMe(2)NPh)(3)-tacn] generates a trigonal prismatic coordination environment for the metal center in the neutral complexes 1, 3, 4, and 6 and the ionic 5. In 2 the six nitrogen atoms of the ligand are in a trigonal prismatic configuration with the oxygen atom of the THF capping one of the triangular faces of the trigonal prism. In 7 the coordination geometry around the uranium atom is best described as bicapped trigonal bipyramidal.     

Tripodal amido boron and aluminum complexes

The synthesis and structural elucidations of novel boron and aluminum complexes incorporating the tripodal triamido [N3]3- ligand framework that is hypothesized to promote the preorganized pyramidal geometry for high Lewis acidity are reported. Salt metathesis between the in situ-generated trianionic lithium complexes of the tripodal amido ligands with BCl3 leads to boranes HC[SiMe2N(4-MeC6H4)]3B (1) and MeSi[SiMe2N(4-MeC6H4)]3B (2); however, substitution of the N-Ar group with the bulky tBu affords the unexpected non-boron-containing LiCl adduct {[HC(SiMe2NtBu)2(SiMeNtBu)]Li3(Et2O)Cl}2 (3) via apparent elimination of MeBCl2. The products derived from the salt metathesis reaction with AlCl3 are determined by the reaction medium: while the reaction in a hexanes-ether mixture or toluene affords solvated salt adduct HC[SiMe2N(4-MeC6H4)]3Al.ClLi(Et2O)2 (4) or salt adduct HC[SiMe2N(4-MeC6H4)]3Al.ClLi (5), respectively; the addition of a small amount of THF produces a mixture of complexes HC[SiMe2N(4-MeC6H4)]3Al.(THF) (6, major) and HC[SiMe2N(4-MeC6H4)]3Al(OCH=CH2).Li(THF)2 (7, minor). The desired complex 6 can be exclusively formed using HC[SiMe2N(4-MeC6H4)]3Li3.(THF)3 and the hexanes-ether mixture solvent. The molecular structures of complexes 1, 3, 5, 6, and 7 have been elucidated by X-ray diffraction studies. The structure of 1 shows an approximately trigonal pyramidal geometry at B with no significant N-B p-p pi-interactions. The strong salt adduct and solvate formation of the tripodal amido Al complex, as well as its similarity to the strong Lewis acid Al(C6F5)3 in the THF adduct and enolaluminate formation and structure, indicate the desired core structure [N3]Al is indeed highly Lewis acidic.     

Investigation of the [Sm(N(SiMe(3))(2))(2)] reducing system in THF. Rate and mechanistic studies

The reductant [Sm(N(SiMe(3))(2))(2)] was examined by cyclic voltammetry and UV-vis spectroscopy. Rate constants and activation parameters for the reduction of 1-iodobutane, 2-butanone, and methylacetoacetate by [Sm(N(SiMe(3))(2))(2)] were measured in THF by stopped-flow absorption decay experiments. Comparison with SmI(2) and SmI(2)-HMPA shows that the redox potential of [Sm(N(SiMe(3))(2))(2)] is intermediate between the SmI(2)-based reductants, yet it reduces alkyl iodides and ketones at a faster rate than the powerful combination of SmI(2) and HMPA. The activation data for reduction of alkyl iodides and ketones by [Sm(N(SiMe(3))(2))(2)] are consistent with highly ordered transition states having low activation barriers. All of these results taken together suggest that the mechanism of reduction of alkyl iodides and ketones by [Sm(N(SiMe(3))(2))(2)] has more inner-sphere character than reduction by SmI(2) or Sm-(HMPA) complexes. The change in the ET mechanism is attributed to the unique structure of the [Sm(N(SiMe(3))(2))(2)] complex.     

Stoichiometry and mechanism of protonation of alkali metal salts of benzophenone radical anions by weak proton donors and its relevance to the base-catalyzed decomposition of benzopinacol

The Stoichiometry of the protonation of lithium and potassium salts of benzophenone radical anions and of the lithium salt of the fluorenone radical anion by methanol has been measured and found to be [(Ar₂C=O)^–]/[MeOH] =21. This result, which was obtained by the method of magnetic titration, implies that paramagnetism decays by the reaction between a ketyl anion and a ketyl radical (i.e., a protonated ketyl anion). The reactivities of alkali metal salts of fluorenone radical anions in relation to methanol exhibit a pronounced dependence on the nature of the counterion. No kinetic deuterium isotope effect has been found for the protonation of the lithium salt of the benzophenone radical anion in tetrahydrofuran (THF) bytert-pentyl alcohol. The lithium salt of the benzophenone radical anion inN,N,N,N-tetramethylethylenediamine (TMEDA) behaves markedly differently. Namely, its protonation by methanol exhibits 1 1 Stoichiometry and it reacts considerably more slowly withsec-butyl alkohol,K(THF)/K(TMEDA) = 2.5. Benzopinacol undergoes decomposition by an alkoxide base to diphenyl ketyl, which decays into an equimolar mixture of benzophenone and benzhydrol. The reaction follows second-order kinetics and the specific rate constants exhibit an inverse relationship with respect to the initial concentration of the alkoxide. With a very strong base benzopinacol decomposes into two diphenyl ketyl anions. On the basis of this information as well as on studies of products, relevant mechanisms are proposed for the protonation of ketyl anions and for the decomposition of aromatic pinacols in basic media.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 83–91, January, 1995.     

Lutetium alkyl and hydride complexes in a non-cyclopentadienyl coordination environment

Lutetium alkyl complexes [Lu(L)(CH(2)SiMe(3))(THF)(n)], which contain a sulfur-linked bis(phenolato) ligand such as 2,2'-thiobis(6-tert-butyl-4-methylphenolate) (L=tbmp, 1) or 1,4-dithiabutanediyl-bis(6-tert-butyl-4-methylphenolate) (L=etbmp, 2), were isolated from the reaction of the lutetium tris(alkyl) complex [Lu(CH(2)SiMe(3))(3)(THF)(2)] with H(2)L. The monomeric structures of these complexes were confirmed by X-ray diffraction studies, showing distorted octahedral geometry around the metal centre. The reaction of [Lu(tbmp)(CH(2)SiMe(3))(THF)(2)] (1) with alcohols ROH (R=iPr, CHPh(2), CPh(3)) results in the formation of the corresponding alkoxide complexes [Lu(tbmp)(OR)(THF)(n)] (4-6). With PhSiH(3) hydride complexes [Lu(L)(mu-H)(THF)(n)](2) (L=tbmp, 7; etbmp, 8) have been prepared in moderate to good yields. They adopt a dimeric form in the solid state as revealed by the X-ray crystal structure of 7. The reactivity of the hydride complexes and their catalytic activity in the ring-opening polymerisation of L-lactide and the hydrosilylation of alkenes are also discussed.     

Novel lanthanide(II) complexes supported by carbon-bridged biphenolate ligands: synthesis, structure and catalytic activity

[Ln[N(SiMe3)2]2(THF)2](Ln = Sm, Yb) reacts with 1 equiv. of carbon-bridged biphenols, 2,2'-methylene-bis(6-tert-butyl-4-methylphenol)(L1H2) or 2,2'-ethylidene-bis(4,6-di-tert-butylphenol)(L2H2), in toluene to give the novel aryloxide lanthanide(II) complexes [[LnL1(THF)n]2](Ln = Sm, n = 3 (1); Ln = Yb, n = 2 (2)) and [[LnL2(THF)3]2](Ln = Sm (5); Ln = Yb (6)) in quantitative yield, respectively. Addition of 2 equiv. of hexamethylphosphoric triamide (HMPA) to a tetrahydrofuran (THF) solution of 1, 2 and 5 affords the corresponding HMPA-coordinated complexes, [[LnL1(THF)m(HMPA)n]2(THF)y](Ln = Sm, n = 2, m = 0, y = 2 (3); Ln = Yb, m = 1, n = 1, y = 6 (4)) and [[SmL2(HMPA)2]2](7) in excellent yields. The single-crystal structural analyses of 3, 4 and 7 revealed that these aryloxide lanthanide(II) complexes are dimeric with two Ln-O bridges. The coordination geometry of each lanthanide metal can be best described as a distorted trigonal bipyramid. Complexes 1-3, 5 and 7 can catalyze the ring-opening polymerization of epsilon-caprolactone (epsilon-CL), and 1-3, along with 5 show moderate activity for the ring-opening polymerization of 2,2-dimethyltrimethylene carbonate (DTC) and the copolymerization of epsilon-CL and DTC to give random copolymers with high molecular weights and relatively narrow molecular weight distributions..     

Alkali metal complexes of sterically hindered mono- and di-carbanions containing Si-O bonds

The oxygen-bridged, silicon-substituted alkane {(Me3Si)2CH(SiMe2)}2O (1) may be prepared by the reaction of {(Me3Si)2CH}Li with ClSiMe2OSiMe2Cl in refluxing THF. Similarly, the alkane {(Me3Si)(Me2MeOSi)CH(SiMe2CH2)}2 (2) is readily accessible from the reaction between {(Me3Si)(Me2MeOSi)CH}Li and ClSiMe2CH2CH2SiMe2Cl under the same conditions. Compound 1 reacts with two equivalents of MeK to give the polymeric complex [[{(Me3Si)2C(SiMe2)}2O]K2(OEt2)]infinity [5(OEt2)] after recrystallisation. Treatment of 2 with two equivalents of either MeLi or MeK gives the corresponding complexes [{(Me3Si)(Me2MeOSi)C(SiMe2CH2)}2Li][Li(DME)3] [7(DME)3] and [{(Me3Si)(Me2MeOSi)C(SiMe2CH2)}2K2]n (8), respectively, after recrystallisation. Treatment of the alkane (Me3Si)2(Me2MeOSi)CH with one equivalent of MeK gives the polymeric complex [{(Me3Si)2(Me2MeOSi)C}K]infinity (3). These compounds have been identified by 1H and 13C{1H} NMR spectroscopy and elemental analyses and compounds 5(OEt2), 7(DME)3 and 3 have been further characterised by X-ray crystallography. Compound 7(DME)3 crystallises as a solvent-separated ion pair, whereas 5(OEt2) and 3 adopt polymeric structures in the solid state.     

Synthesis and structural characterization of a series of lanthanide(II) amides: steric effect of amido ligand

The synthesis and structures of a series of lanthanide(II) and lanthanide(III) complexes supported by the amido ligand N(SiMe3)Ar were described. Several lanthanide(III) amide chlorides were synthesized by a metathesis reaction of LnCl3 with lithium amide, including {[(C6H5)(Me3Si)N]2YbCl(THF)}2.PhCH3 (1), [(C6H3-iPr2-2,6)(SiMe3)N]2YbCl(mu-Cl)Li(THF)3.PhCH3 (4), [(C6H3-iPr2-2,6)(SiMe3)N]YbCl2(THF)3 (6), and [(C6H3-iPr2-2,6)(SiMe3)N]2SmCl3Li2(THF)4 (7). The reduction reaction of 1 with Na-K alloy afforded bisamide ytterbium(II) complex [(C6H5)(Me3Si)N]2Yb(DME)2 (2). The same reaction for Sm gave an insoluble black powder. An analogous samarium(II) complex [(C6H5)(Me3Si)N]2Sm(DME)2 (3) was prepared by the metathesis reaction of SmI2 with NaN(C6H5)(SiMe3). The reduction reaction of ytterbium chloride 4 with Na-K alloy afforded monoamide chloride {[(C6H3-iPr2-2,6)(SiMe3)N]Yb(mu-Cl)(THF)2}2 (5), which is the first example of ytterbium(II) amide chloride, formed via the cleavage of the Yb-N bond. The same reduction reaction of 7 gave a normal bisamide complex [(C6H3-iPr2-2,6)(SiMe3)N]2Sm(THF)2 (8) via Sm-Cl bond cleavage. This is the first example for the steric effect on the outcome of the reduction reaction in lanthanide(II) chemistry. 5 can also be synthesized by the Na/K alloy reduction reaction of 6. All of the complexes were fully characterized including X-ray diffraction for 1-7.     

Titanium, zinc and alkaline-earth metal complexes supported by bulky O,N,N,O-multidentate ligands: syntheses, characterisation and activity in cyclic ester polymerisation

The reactions of the bulky amino-bis(phenol) ligand Me(2)NCH(2)CH(2)N[CH(2)-3,5-Bu(t)(2)-C(6)H(2)OH-2](2)(1-H(2)) with Zn[N(SiMe(3))(2)](2)(4), [Mg[N(SiMe(3))(2)](2)](2)(5) and Ca[N(SiMe(3))(2)](2)(THF)(2)(6) yield the complexes 1-Zn, 1-Mg and 1-Ca in good yields. The X-ray structure of 1-Ca showed the complex to be dimeric, with calcium in a distorted octahedral coordination geometry. Five of the positions are occupied by an N(2)O(3) donor set, while the sixth is taken up by an intramolecular close contact to an o-Bu(t) substituent, a rare case of a Ca...H-C agostic interaction (Ca...H distances of 2.37 and 2.41 Angstroms). Another sterically hindered calcium complex, Ca[2-Bu(t)-6-(C(6)F(5)N=CH)C(6)H(3)O](2)(THF)(2).(C(7)H(8))(2/3)(7), was prepared by reaction of 6 with the iminophenol 2-Bu(t)-6-(C(6)F(5)N=CH)C(6)H(3)OH (3-H). According to the crystal structure 7 is monomeric and octahedral, with trans THF ligands. The complex Ti[N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)O-2](2)[CH(2)CH(2)NMe(2)]](OPr(i))(2)(2-Ti) was prepared by treatment of Ti(OPr(i)(4)) with the new amino-bis(phenol) Me(2)NCH(2)CH(2)N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)OH-2](2)(2-H(2)). The reduction of 2-Ti with sodium amalgam gave the titanium(III) salt Ti[N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)O-2](2)[CH(2)CH(2)NMe(2)]](OPr(i))(2).Na(THF)(2)(8). A comparison of the X-ray structures of 2-Ti and 8 showed that the additional electron in 8 significantly reduced the intensity of the pi-bonding from the oxygen atoms of the isopropoxide groups to titanium. 1-Ca and 8 were active initiators for the ring-opening polymerisation of epsilon-caprolactone (up to 97% conversion of 200 equivalents in 2 hours) and yielded polymers with narrow molecular weight distributions.     

O(2) activation and hydrolysis of Salan rare-earth metal alkyl complexes

Salan ligated yttrium alkyl complex , L(1)Y(CH(2)SiMe(3))(THF) (Salan = L(1): [2-O-3,5-tBu(2)-C(6)H(2)CH(2)N(CH(3))CH(2)](2)), was exposed to an oxygen/nitrogen atmosphere to give a bimetallic alkoxide complex , [L(1)Y(mu-OCH(2)SiMe(3))](2). Whilst the lutetium counterparts (L(1)Lu(CH(2)SiMe(3))(THF)) and (L(2)Lu(CH(2)SiMe(3))(THF); L(2): [2-O-3-tBu-C(6)H(2)CH(2)N(CH(3))CH(2)](2)) were hydrolysed with moist nitrogen to afford mixed hydroxy/silyloxy complexes and ([L(1,2)Lu(mu-OSiMe(3))(mu-OH)LuL(1,2)]), respectively.