Multistimuli‐Responsive Luminescence Switching of Pyrazine Derivative Based Donor–Acceptor–Donor Luminophores

Three symmetrical donor–acceptor–donor (D–A–D) luminophores ( C1 , C2 , and C3 ) with pyrazine derivatives as electron‐withdrawing groups have been developed for multistimuli‐responsive luminescence switching. For comparison, reference compounds R1 and R2 without the pyrazine moiety have also been synthesized. Intramolecular charge transfer (ICT) interactions can be found for all D–A–D luminophores owing to the electron‐withdrawing properties of the two imine nitrogen atoms in the pyrazine ring and the electron‐donating properties of the other two amine nitrogen atoms in the two triphenylamine units. Moreover, luminophores C1 , C2 , and C3 exhibit “on–off–on” luminescence switching properties in mixtures of water/tetrahydrofuran with increasing water content, which is different from the “on–off” switching for typical aggregation‐caused quenching (ACQ) materials and “off–on” switching for traditional aggregation‐induced emission (AIE) materials. Additionally, upon grinding the pristine samples, luminophores C1 , C2 , and C3 display bathochromically shifted photoluminescence maxima that can be recovered by either solvent fuming or thermal annealing treatments. The piezofluorochromic (PFC) properties are more pronounced than those for reference compounds R1 and R2 , which indicates that D–A molecules have the ability to amplify the PFC effect by tuning the ICT interactions upon tiny structural changes under pressure. Furthermore, the target luminophores demonstrate acid‐responsive photoluminescence spectra that can be recovered in either basic or ambient environments. These results suggest that D–A complexes are potential candidates for multistimuli‐responsive luminescence switching because their ICT profiles can be facilely tuned with tiny external stimuli.     

Efficient Intramolecular Charge Transfer in Oligoyne‐Linked Donor–π–Acceptor Molecules

Studies are reported on a series of triphenylamine–(C?C)_n–2,5‐diphenyl‐1,3,4‐oxadiazole dyad molecules (n=1–4, 1 , 2 , 3 and 4 , respectively) and the related triphenylamine‐C₆H₄–(C?C)₃–oxadiazole dyad 5 . The oligoyne‐linked D–π–A (D=electron donor, A=electron acceptor) dyad systems have been synthesised by palladium‐catalysed cross‐coupling of terminal alkynyl and butadiynyl synthons with the corresponding bromoalkynyl moieties. Cyclic voltammetric studies reveal a reduction in the HOMO–LUMO gap in the series of compounds 1 – 4 as the oligoyne chain length increases, which is consistent with extended conjugation through the elongated bridges. Photophysical studies provide new insights into conjugative effects in oligoyne molecular wires. In non‐polar solvents the emission from these dyad systems has two different origins: a locally excited (LE) state, which is responsible for a π*→π fluorescence, and an intramolecular charge transfer (ICT) state, which produces charge‐transfer emission. In polar solvents the LE state emission vanishes and only ICT emission is observed. This emission displays strong solvatochromism and analysis according to the Lippert–Mataga–Oshika formalism shows significant ICT for all the luminescent compounds with high efficiency even for the longer more conjugated systems. The excited‐state properties of the dyads in non‐polar solvents vary with the extent of conjugation. For more conjugated systems a fast non‐radiative route dominates the excited‐state decay and follows the Engelman–Jortner energy gap law. The data suggest that the non‐radiative decay is driven by the weak coupling limit.     

Thermodynamics and Conformations in the Formation of Excited States and Their Interconversions for Twisted Donor‐Substituted Tridurylboranes

We synthesized a series of donor‐substituted tridurylboranes containing different types and number of chromophores including 1‐pyrene (PB1–3), 3‐carbazole (CBC1–3), or substituted p‐carbazol‐N‐phenyl (CBN3a–c) as various donor–acceptor (D–A) molecules. The photophysical and electrochemical properties of these twisted D–A molecules were investigated by means of UV/Vis absorption and fluorescence spectroscopy as well as cyclic voltammetry (CV). Solvent polarity, viscosity, and temperature effects on the fluorescence emission reveal the existence of three types of excited states, and their equilibria and interconversions between three excited states. In increasing order of the charge‐separated extent and the conformational change, three excited states are the locally excited (LE) state, the more planar intramolecular charge‐transfer (ICT) state, and the more twisted ICT (TICT) state as compared to the ground state. The TICT state undergoes a conformational change with a higher energy barrier over the ICT state. The solvent polarity effect on the state conversion is opposite to the viscosity effect, and temperature effects derive from its resulting changes of polarity and viscosity. For example, the increase of the polarity of the solvent results in excited‐state conversions from the LE state to the ICT state, and/or from the ICT to the TICT state, and an increased viscosity leads to the opposite conversions. On the basis of electrochemical and spectral data, thermodynamics of a possible ICT process were estimated, and correlated with the excited‐state character. Finally, three excited states have been characterized by the conformation, the photophysical properties, and the thermodynamics of the ICT processes.     

Engineering the Interconnecting Position of Star‐Shaped Donor–π–Acceptor Molecules Based on Triazine,Spirofluorene, and Triphenylamine Moieties for Color Tuning from Deep Blue to Green

Pi‐conjugated organic molecules featuring the donor–bridge–acceptor (D–π–A) structure have been widely used in semiconducting materials owing to their rigid structure, good thermal stability, excellent charge transfer, and high emission efficiency. To investigate the effect of the D–π–A molecular structure on the photophysical properties, in this contribution, three star‐shaped D–π–A isomers based on the 2,4,6‐triphenyl‐1,3,5‐triazine, spirofluorene, and triphenylamine moieties, that is, p‐TFTPA, mp‐TFTPA, and m‐TFTPA, were synthesized by elaborately engineering the interconnecting position in the building‐block units. The optophysical properties of these compounds were systematically explored by experiments and theory calculations. Definitively, changing the interconnecting position in these molecules played a significant role in the degree of π conjugation, which resulted in tunable emission colors from deep blue to green. Moreover, these isomers were employed as emissive dopants in organic light‐emitting diodes. The highest external quantum efficiency of 2.3 % and current efficiency of 6.2 cd A^?1 were achieved by using the p‐TFTPA based device. This research demonstrates a feasible way to realize blue emitters by engineering D–π–A conjugation.     

Self‐Assembled Architectures with Segregated Donor and Acceptor Units of a Dyad Based on a Monopyrrolo‐Annulated TTF–PTM Radical

An electron donor–acceptor dyad based on a polychlorotriphenylmethyl (PTM) radical subunit linked to a tetrathiafulvalene (TTF) unit through a π‐conjugated N‐phenyl–pyrrole–vinylene bridge has been synthesized and characterized. The intramolecular electron transfer process and magnetic properties of the radical dyad have been evaluated by cyclic voltammetry, UV/Vis spectroscopy, vibrational spectroscopy, and ESR spectroscopy in solution and in the solid state. The self‐assembling abilities of the radical dyad and of its protonated non‐radical analogue have been investigated by X‐ray crystallographic analysis, which revealed that the radical dyad produced a supramolecular architecture with segregated donor and acceptor units in which the TTF subunits were arranged in 1D herringbone‐type stacks. Analysis of the X‐ray data at different temperatures suggests that the two inequivalent molecules that form the asymmetric unit of the crystal of the radical dyad evolve into an opposite degree of electronic delocalization as the temperature decreases.     

Regioisomeric Effects on the Electronic Features of Indenothiophene‐Bridged D–π‐A′–A DSSC Sensitizers

Two D–π‐A′–A regioisomers (A‐IDT‐D and D‐IDT‐A) featuring 4,4′‐di‐p‐tolyl‐4 H‐indeno[1,2‐b]‐thiophene as a π linker (π) between the diarylamino donor (D) and the pyrimidine–cyanoacrylic acid acceptor (A′–A) have been successfully synthesized and characterized as efficient sensitizers for the dye‐sensitized solar cells (DSSCs). The different arrangements of the D and A′–A blocks on the unsymmetrical indenothiophene (IDT) core render the dipole of IDT being along (A‐IDT‐D) or opposite (D‐IDT‐A) to the direction of intramolecular (donor‐to‐acceptor) charge transfer, and thus induce variations in the physical properties. The experimental observations correlated well with the theoretical analyses, clearly revealing the trade‐off between the molar extinction coefficient (ε) and the S₀→S₁ transition energy. As a result, a superior ε value was observed for D‐IDT‐A, whereas a bathochromic shift in the absorption occurred in A‐IDT‐D. The larger ε value of D‐IDT‐A together with its more favorable energy level relative to TiO₂ led to a higher power conversion efficiency of 7.41 % for the D‐IDT‐A‐based DSSC, retaining approximately 95 % of the N719‐based DSSC efficiency. This work manifests the clear structure–property relationship for the case of donor and acceptor components being connected by an unsymmetrical π linker and provides insights for molecular engineering of organic sensitizers.     

Effects of donor unit and π‐bridge on photovoltaic properties of D–A copolymers based on benzo[1,2‐b:4,5‐c']‐dithiophene‐4,8‐dione acceptor unit

A series of donor‐π‐acceptor (D‐π‐A) conjugated copolymers ( PBDT‐AT, PDTS‐AT, PBDT‐TT , and PDTS‐TT ), based on benzo[1,2‐b:4,5‐c']dithiophene‐4,8‐dione (BDD) acceptor unit with benzodithiophene (BDT) or dithienosilole (DTS) as donor unit, alkylthiophene (AT) or thieno[3,2‐b]thiophene (TT) as conjugated π‐bridge, were designed and synthesized for application as donor materials in polymer solar cells (PSCs). Effects of the donor unit and π‐bridge on the optical and electrochemical properties, hole mobilities, and photovoltaic performance of the D‐π‐A copolymers were investigated. PSCs with the polymers as donor and PC₇₀BM as acceptor exhibit an initial power conversion efficiency (PCE) of 5.46% for PBDT‐AT , 2.62% for PDTS‐AT , 0.82% for PBDT‐TT , and 2.38% for PDTS‐TT . After methanol treatment, the PCE was increased up to 5.91%, 3.06%, 1.45%, and 2.45% for PBDT‐AT, PDTS‐AT, PBDT‐TT , and PDTS‐TT , respectively, with significantly increased FF. The effects of methanol treatment on the photovoltaic performance of the PSCs can be ascribed to the increased and balanced carrier transport and the formation of better nanoscaled interpenetrating network in the active layer. The results indicate that both donor unit and π‐bridge are crucial in designing a D‐π‐A copolymer for high‐performance photovoltaic materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1929–1940     

Targeting π‐Conjugated Multiple Donor–Acceptor Motifs Exemplified by Tetrathiafulvalene‐Linked Quinoxalines and Tetrabenz[bc,ef,hi,uv]ovalenes: Synthesis,Spectroscopic, Electrochemical,and Theoretical Characterization

An efficient synthetic approach to a symmetrically functionalized tetrathiafulvalene (TTF) derivative with two diamine moieties, 2‐[5,6‐diamino‐4,7‐bis(4‐pentylphenoxy)‐1,3‐benzodithiol‐2‐ylidene]‐4,7‐bis(4‐pentylphenoxy)‐1,3‐benzodithiole‐5,6‐diamine ( 2 ), is reported. The subsequent Schiff‐base reactions of 2 afford large π‐conjugated multiple donor–acceptor (D–A) arrays, for example, the triad 2‐[4,9‐bis(4‐pentylphenoxy)‐1,3‐dithiolo[4,5‐g]quinoxalin‐2‐ylidene]‐4,9‐bis(4‐pentylphenoxy)‐1,3‐dithiolo[4,5‐g]quinoxaline ( 8 ) and the corresponding tetrabenz[bc,ef,hi,uv]ovalene‐fused pentad 1 , in good yields and high purity. The novel redox‐active nanographene 1 is so far the largest known TTF‐functionalized polycyclic aromatic hydrocarbon (PAH) with a well‐resolved ¹H NMR spectrum. The electrochemically highly amphoteric pentad 1 and triad 8 exhibit various electronically excited charge‐transfer states in different oxidation states, thus leading to intense optical intramolecular charge‐transfer (ICT) absorbances over a wide spectral range. The chemical and electrochemical oxidations of 1 result in an unprecedented TTF^?+ radical cation dimerization, thereby leading to the formation of [ 1 ^?+]₂ at room temperature in solution due to the stabilizing effect, which arises from strong π–π interactions. Moreover, ICT fluorescence is observed with large solvent‐dependent Stokes shifts and quantum efficiencies of 0.05 for 1 and 0.035 for 8 in dichloromethane.     

Versatile Photophysical Properties of meso‐Aryl‐Substituted Subporphyrins: Dipolar and Octupolar Charge‐Transfer Interactions

Donor–acceptor systems based on subporphyrins with nitro and amino substituents at meta and para positions of the meso‐phenyl groups were synthesized and their photophysical properties have been systematically investigated. These molecules show two types of charge‐transfer interactions, that is, from center to periphery and periphery to center depending on the peripheral substitution, in which the subporphyrin moiety plays a dual role as both donor and acceptor. Based on the solvent‐polarity‐dependent photophysical properties, we have shown that the fluorescence emission of para isomers originates from the solvatochromic, dipolar, symmetry‐broken, and relaxed excited states, whereas the non‐solvatochromic fluorescence of meta isomers is of the octupolar type with false symmetry breaking. The restricted meso‐(4‐aminophenyl) rotation at low temperature prevents the intramolecular charge‐transfer (ICT)‐forming process. The two‐photon absorption (TPA) cross‐section values were determined by photoexcitation at 800 nm in nonpolar toluene and polar acetonitrile solvents to see the effect of ICT on the TPA processes. The large enhancement in the TPA cross‐section value of approximately 3200 GM (1 GM=10^?50 cm⁴ s photon^?1) with donor–acceptor substitution has been attributed to the octupolar effect and ICT interactions. A correlation was found between the electron‐donating/‐withdrawing abilities of the peripheral groups and the TPA cross‐section values, that is, p‐aminophenyl>m‐aminophenyl>nitrophenyl. The increased stability of octupolar ICT interactions in highly polar solvents enhances the TPA cross‐section value by a factor of approximately 2 and 4, respectively, for p‐amino‐ and m‐nitrophenyl‐substituted subporphyrins. On the other hand, the stabilization of the symmetry‐broken, dipolar ICT state gives rise to a negligible impact on the TPA processes.     

Donor–Acceptor (D–A)‐Substituted Polyyne Chromophores: Modulation of Their Optoelectronic Properties by Varying the Length of the Acetylene Spacer

A series of donor–acceptor‐substituted alkynes, 2 a – f , was synthesized in which the length of the π‐conjugated polyyne spacer between the N,N‐diisopropylanilino donor and the 1,1,4,4‐tetracyanobuta‐1,3‐diene (TCBD) acceptor was systematically changed. The effect of this structural change on the optoelectronic properties of the molecules and, ultimately, their third‐order optical nonlinearity was comprehensively investigated. The branched N,N‐diisopropyl groups on the anilino donor moieties combined with the nonplanar geometry of 2 a – f imparted exceptionally high solubility to these chromophores. This important property allowed for performing INADEQUATE NMR measurements without ¹³C labeling, which, in turn, resulted in a complete assignment of the carbon skeleton in chromophores 2 a – f and the determination of the ¹³C–¹³C coupling constants. This body of data provided unprecedented insight into characteristic ¹³C chemical shift patterns in push–pull‐substituted polyynes. Electrochemical and UV/Vis spectroscopic studies showed that the HOMO–LUMO energy gap decreases with increasing length of the polyyne spacer, while this effect levels off for spacers with more than four acetylene units. The third‐order optical nonlinearity of this series of molecules was determined by measuring the rotational averages of the third‐order polarizabilities (γ_rot) by degenerate four‐wave mixing (DFWM). These latter studies revealed high third‐order optical nonlinearities for the new chromophores; most importantly, they provided fundamental insight into the effect of the conjugated spacer length in D–A polyynes, that can be exploited in the future design of suitable charge‐transfer chromophores for applications in optoelectronic devices.     

Synthesis and Characterization of Donor–π‐Acceptor‐Based Porphyrin Sensitizers: Potential Application of Dye‐Sensitized Solar Cells

New porphyrin sensitizers based on donor–π‐acceptor (D‐π‐A) approach have been designed, synthesized, characterized by various spectroscopic techniques and their photovoltaic properties explored. N,N′‐Diphenylamine acts as donor, the porphyrin is the π‐spacer, and either carboxylic acid or cyanoacryclic acid acts as acceptor. All compounds were characterized by using ¹H NMR spectroscopy, ESI‐MS, UV–visible emission spectroscopies as well as electrochemical methods. The presence of aromatic groups between porphyrin π‐plane and acceptor group push the absorption of both Soret and Q‐bands of porphyrin towards the red region. The electrochemical properties suggests that LUMO of these sensitizers above the TiO₂ conduction band. Finally, the device was fabricated using liquid redox electrolyte (I^?/I₃^?) and its efficiency was compared with that of a leading sensitizer.     

Exceptional Blueshifted and Enhanced Aggregation‐Induced Emission of Conjugated Asymmetric Triazines and Their Applications in Superamplified Detection of Explosives

A novel conjugated asymmetric donor–acceptor (CADA) strategy for preventing the redshift in photoluminescence, as well as preserving the merits of donor–acceptor architectures, was proposed and demonstrated for two triazine derivatives, which showed highly efficient, narrow, and blueshifted ultraviolet light emission in solid films along with special aggregation‐induced emission behavior. A mechanism of aggregation‐induced locally excited‐state emission by suppressing the twisted intramolecular charge‐transfer emission for the spectacular optoelectronic phenomena of these CADA molecules was suggested on the basis of both experimental measurements and theoretical calculations. By taking advantage of this special CADA architecture, fluorescent probes based on aggregates of conjugated asymmetric triazines in THF/water for the detection of explosives show superamplified detection of picric acid with high quenching constants (>1.0×10⁷ M ^?1) and a low detection limit of 15 ppb.     

Design and Synthesis of Aviram–Ratner‐Type Dyads and Rectification Studies in Langmuir–Blodgett (LB) Films

The design and synthesis of Aviram–Ratner‐type molecular rectifiers, featuring an anilino‐substituted extended tetracyanoquinodimethane (exTCNQ) acceptor, covalently linked by the σ‐spacer bicyclo[2.2.2]octane (BCO) to a tetrathiafulvalene (TTF) donor moiety, are described. The rigid BCO spacer keeps the TTF donor and exTCNQ acceptor moieties apart, as demonstrated by X‐ray analysis. The photophysical properties of the TTF‐BCO‐exTCNQ dyads were investigated by UV/Vis and EPR spectroscopy, electrochemical studies, and theoretical calculations. Langmuir–Blodgett films were prepared and used in the fabrication and electrical studies of junction devices. One dyad showed the asymmetric current–voltage (I–V) curve characteristic for rectification, unlike control compounds containing the TTF unit but not the exTCNQ moiety or comprising the exTCNQ acceptor moiety but lacking the donor TTF part, which both gave symmetric I–V curves. The direction of the observed rectification indicated that the preferred electron current flows from the exTCNQ acceptor to the TTF donor.     

Low Band Gap Donor–Acceptor Conjugated Systems Based on 3‐Alkoxy or 3‐Pyrrolidino‐4‐cyanothiophene and Benzothiadiazole Units

3‐Hexyloxy‐4‐cyanothiophene, 3‐pyrrolidil‐4‐cyanothiophene, and 3,4‐ethylenedioxythiophene (EDOT) units are used with benzothiadiazole as building blocks for the development of three new conjugated donor–acceptor–donor (DAD) derivatives. The DAD molecules have the central acceptor part, which is formed by combining electron‐withdrawing cyano groups and the benzothiadiazole moiety, in common. Theoretical calculations and UV/Vis and electrochemical data reveal the key role of the end‐capped donor to tune the electronic properties of the derivatives. A study of the electropolymerization process of the three derivatives shows the strong influence of the donor parts on both the reactivity of the precursors and the electronic properties of the resulting polymers. Derivatives end‐capped with pyrrolidinocyano thiophene or EDOT units lead to films of polymers presenting low band gaps of around 0.9–1.4 eV. Upon oxidation, the two polymers present different behavior. In the presence of the pyrrolidinocyano thiophene moieties, oxidation leads to a blueshift of the absorption bands, whereas with EDOT units a classical redshift, giving high absorption in the near‐IR region, is observed for the oxidized states.     

Molecular Design of Thermally Activated Delayed‐Fluorescent Emitters Using 2,2′‐Bipyrimidine as the Acceptor in Donor–Acceptor Structures

Donor–acceptor–donor (D–A–D)‐type thermally activated delayed fluorescence (TADF) emitters 5,5′‐bis{4‐[9,9‐dimethylacridin‐10(9H )‐yl]phenyl}‐2,2′‐bipyrimidine (Ac‐bpm) and 5,5′‐bis[4‐(10H ‐phenoxazin‐10‐yl)phenyl]‐2,2′‐bipyrimidine (Px‐bpm), based on the 2,2′‐bipyrimidine accepting unit, were developed and their TADF devices were fabricated. The orthogonal geometry between the donor unit and the 2,2′‐bipyrimidine accepting core facilitated a HOMO/LUMO spatial separation, thus realizing thermally activated delayed fluorescence. The exhibited electroluminescence ranged from green to yellow, depending on the donor unit, with maximum external quantum efficiencies of up to 17.1 %.     

OLED and PLED Devices Employing Electrogenerated,Intramolecular Charge‐Transfer Fluorescence

The light generating mechanism of a series of light emitting diodes with electron donor–bridge–acceptor systems (D–b–A) as the emitting species was examined by constructing model diodes based on small organic molecules (OLEDs) as well as on molecularly doped electroactive (poly‐N‐vinylcarbazole, PVK) and insulating (polystyrene, PS) polymers (PLEDs). The direct electrogeneration of an intramolecular charge‐transfer (CT) fluorescence of the donor–bridge–acceptor systems occurred readily in OLED devices with a D–b–A system as the emissive layer. In diodes with PS as the host matrix, hole‐injection and electron‐injection occurred directly in the D–b–A molecules residing close to the anode and the cathode, respectively. In the PVK diodes, hole‐injection occurred primarily into PVK and the positive charge carrier was subsequently trapped on the D–b–A molecule, whereas electron‐injection at the cathode side occurred directly into the D–b–A molecules. Charge‐hopping between neighboring molecules then occurred until a hole and electron resided on the same molecule, which is equivalent to the formation of the CT excited state, and which finally relaxed by intramolecular charge recombination under the emission of CT fluorescence.     

Surface Charge‐Transfer Doping of Graphene Nanoflakes Containing Double‐Vacancy (5‐8‐5) and Stone–Wales (55‐77) Defects through Molecular Adsorption

The adsorption of six electron donor–acceptor (D/A) organic molecules on various sizes of graphene nanoflakes (GNFs) containing two common defects, double‐vacancy (5‐8‐5) and Stone–Wales (55‐77), are investigated by means of ab initio DFT [M06‐2X(‐D3)/cc‐pVDZ]. Different D/A molecules adsorb on a defect graphene (DG) surface with binding energies (ΔE_b) of about ?12 to ?28 kcal mol^?1. The ΔE_b values for adsorption of molecules on the Stone–Wales GNF surface are higher than those on the double vacancy GNF surface. Moreover, binding energies increase by about 10 % with an increase in surface size. The nature of cooperative weak interactions is analyzed based on quantum theory of atoms in molecules, noncovalent interactions plot, and natural bond order analyses, and the dominant interaction is compared for different molecules. Electron density population analysis is used to explain the n‐ and p‐type character of defect graphene nanoflakes (DGNFs) and also the change in electronic properties and reactivity parameters of DGNFs upon adsorption of different molecules and with increasing DGNF size. Results indicate that the HOMO–LUMO energy gap (E_g) of DGNFs decreases upon adsorption of molecules. However, by increasing the size of DGNFs, the E_g and chemical hardness of all complexes decrease and the electrophilicity index increases. Furthermore, the values of the chemical potential of acceptor–DGNF complexes decrease with increasing size, whereas those of donor–DGNF complexes increase.     

Redox‐Active Metal–Organic Frameworks: Highly Stable Charge‐Separated States through Strut/Guest‐to‐Strut Electron Transfer

Molecular organization of donor and acceptor chromophores in self‐assembled materials is of paramount interest in the field of photovoltaics or mimicry of natural light‐harvesting systems. With this in mind, a redox‐active porous interpenetrated metal–organic framework (MOF), {[Cd(bpdc)(bpNDI)] ? 4.5 H₂O ? DMF}_n ( 1 ) has been constructed from a mixed chromophoric system. The μ‐oxo‐bridged secondary building unit, {Cd₂(μ‐OCO)₂}, guides the parallel alignment of bpNDI (N,N′‐di(4‐pyridyl)‐1,4,5,8‐naphthalenediimide) acceptor linkers, which are tethered with bpdc (bpdcH₂=4,4′‐biphenyldicarboxylic acid) linkers of another entangled net in the framework, resulting in photochromic behaviour through inter‐net electron transfer. Encapsulation of electron‐donating aromatic molecules in the electron‐deficient channels of 1 leads to a perfect donor–acceptor co‐facial organization, resulting in long‐lived charge‐separated states of bpNDI. Furthermore, 1 and guest encapsulated species are characterised through electrochemical studies for understanding of their redox properties.     

Luminescent Quadrupolar Borazine Oligomers: Synthesis,Photophysics, and Two‐Photon Absorption Properties

A set of monodisperse bent donor–acceptor–donor‐type conjugated borazine oligomers, BnNn+1 (n=1–4), incorporating electron‐rich triarylamine donor and electron‐deficient triarylborane acceptor units has been prepared through an iterative synthetic approach that takes advantage of highly selective silicon–boron and tin–boron exchange reactions. The effect of chain elongation on the electrochemical, one‐ and two‐photon properties and excited‐state photodynamics has been investigated. Strong intramolecular charge transfer (ICT) from the arylamine donors to boryl‐centered acceptor sites results in emissions with high quantum yields (Φ_fl>0.5) in the range of 400–500 nm. Solvatochromic effects lead to solvent shifts as large as ～70 nm for the shortest member (n=1) and gradually decrease with chain elongation. The oligomers exhibit strong two‐photon absorption (2PA) in the visible spectral region with 2PA cross sections as large as 1410 GM (n=4), and broadband excited‐state absorption (ESA) attributed to long‐lived singlet–singlet and radical cation/anion absorption. The excited‐state dynamics also show sensitivity to the solvent environment. Electrochemical observations and DFT calculations (B3LYP/6‐31G*) reveal spatially separated HOMO and LUMO levels resulting in highly fluorescent oligomers with strong ICT character. The BnNn+1 oligomers have been used to demonstrate the detection of cyanide anions with association constants of log K>7.     

Charge‐Recombination Fluorescence from Push–Pull Electronic Systems Constructed around Amino‐Substituted Styryl–BODIPY Dyes

A small series of donor–acceptor molecular dyads has been synthesized and fully characterized. In each case, the acceptor is a dicyanovinyl unit and the donor is a boron dipyrromethene (BODIPY) dye equipped with a single styryl arm bearing a terminal amino group. In the absence of the acceptor, the BODIPY‐based dyes are strongly fluorescent in the far‐red region and the relaxed excited‐singlet states possess significant charge‐transfer character. As such, the emission maxima depend on both the solvent polarity and temperature. With the corresponding push–pull molecules, there is a low‐energy charge‐transfer state that can be observed by both absorption and emission spectroscopy. Here, charge‐recombination fluorescence is weak and decays over a few hundred picoseconds or so to recover the ground state. Overall, these results permit evaluation of the factors affecting the probability of charge‐recombination fluorescence in push–pull dyes. The photophysical studies are supported by cyclic voltammetry and DFT calculations.