Effect of ZnO nanoparticles filler concentration on the properties of PEO-ENR50-LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript> solid polymeric electrolyte

A solid polymer electrolyte comprising blend of poly(ethylene oxide) and 50% epoxidized natural rubber (ENR50) as a polymer host, LiCF₃SO₃ as a salt and nanoparticle ZnO as an inorganic filler was prepared by solution-casting technique. The effect of filler on the electrolyte properties was characterized and analysed. FESEM analysis showed that the filler was well distributed in the polymer matrix, while the effective interaction between the salt and the polymer host was reduced by the addition of filler. As evidenced by FTIR analysis, which showed the formation of triplet peak at C-O-C stretching region. Ionic conductivity was found to decrease from 1.4 × 10⁻⁴ Scm⁻¹ to 2.5 × 10⁻⁶ Scm⁻¹ upon the addition of filler, due to the blocking effect of filler into the electrolyte conduction pathways. The temperature dependence on the electrolyte conductivity obeys Arrhenius rule in two temperature regions.     

Thermo-optic coefficients of monoclinic KLu(WO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The three thermo-optic coefficients of the biaxial laser host KLu(WO₄)₂ are measured at 633 nm by a deflection method. Their values at 300 K amount to ∂ n _g /∂ T=−7.4×10⁻⁶ K⁻¹; ∂ n _m /∂ T=−1.6×10⁻⁶ K⁻¹ and ∂ n _p /∂ T=−10.8×10⁻⁶ K⁻¹. Nearly athermal propagation directions are found for polarizations along the N _m and N _p dielectric axes.     

Ionic conductivity studies on LiSmO<Subscript>2</Subscript> by impedance spectroscopy

Lithium samarium oxide has been prepared by solid-state reaction method and characterized by X-ray diffraction (XRD) and impedance spectroscopy. XRD pattern of the sample reveals the formation of the sample. The conductivity studies, dielectric studies, and modulus analysis of the samples have been carried out for different temperatures. The bulk conductivity of the sample has been found to be 1.21 × 10⁻⁵ Scm⁻¹ at 420 °C. The temperature variation of the direct current conductivity obeys the Arrhenius relation. The modulus analysis of the sample indicates the non-Debye nature of the sample which corresponds to long-time slow polarization and relaxation of hopping charges.     

Solid polymeric electrolyte of PVC–ENR–LiClO<Subscript>4</Subscript>

The ionic conductivity of PVC–ENR–LiClO₄ (PVC, polyvinyl chloride; ENR, epoxidized natural rubber) as a function of LiClO₄ concentration, ENR concentration, temperature, and radiation dose of electron beam cross-linking has been studied. The electrolyte samples were prepared by solution casting technique. Their ionic conductivities were measured using the impedance spectroscopy technique. It was observed that the relationship between the concentration of salt, as well as temperature, and conductivity were linear. The electrolyte conductivity increases with ENR concentration. This relationship was discussed using the number of charge carrier theory. The conductivity–temperature behaviour of the electrolyte is Arrhenian. The conductivity also varies with the radiation dose of the electron beam cross-linking. The highest room temperature conductivity of the electrolyte of 8.5 × 10⁻⁷ S/cm was obtained at 30% by weight of LiClO₄. The activation energy, E _a and pre-exponential factor, σ _o, are 1.4 × 10⁻² eV and 1.5 × 10⁻¹¹ S/cm, respectively.     

Spectroscopic properties of Nd<Superscript>3+</Superscript>:CaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> crystal

The absorption spectra, fluorescence spectrum and fluorescence decay curve of Nd³⁺ ions in CaNb₂O₆ crystal were measured at room temperature. The peak absorption cross section was calculated to be 6.202×10⁻²⁰ cm² with a broad FWHM of 7 nm at 808 nm for E//a light polarization. The spectroscopic parameters of Nd³⁺ ions in CaNb₂O₆ crystal have been investigated based on Judd-Ofelt theory. The parameters of the line strengths Ω _t are Ω ₂=5.321×10⁻²⁰ cm²,Ω ₄=1.734×10⁻²⁰ cm²,Ω ₆=2.889×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 167 μs, 152 μs and 91%, respectively. The fluorescence branch ratios are calculated to be β ₁=36.03%,β ₂=52.29%,β ₃=11.15%,β ₄=0.533%. The emission cross section at 1062 nm is 9.87×10⁻²⁰ cm².     

Direct calculation of transition intensities in LiYF<Subscript>4</Subscript>: Nd<Superscript>3+</Superscript>

Duan’s simple model is extended to analyze the mixing of the 4f ^{N − 1}5d configuration with the 4f ^N states. The explicit static coupling and traditional dynamic coupling are considered, and the parameters are fitted according to the absorption spectrum in LiYF₄: Nd³⁺. The parameter values obtained are as follows: T ₃₂ = −28i × 10⁻⁷, T ₅₂ = −1151i × 10⁻⁷, A ₃₂² = 192i × 10⁻¹² cm, A ₅₂⁴ = i × 10⁻¹² cm, A ₇₂⁶ = 54i × 10⁻¹² cm, and A ₇₆⁶ = −680i × 10⁻¹² cm. Compared to the experimental measurements, the present model yields better results than those obtained from the Judd-Ofelt theory. The text was submitted by the authors in English.     

Di-urethanesil hybrid electrolytes doped with Mg(CF3SO3)2

Two siloxane-based di-urethanesil frameworks incorporating poly(oxyethylene) (POE) chains have been synthesized by the sol–gel process and doped with magnesium triflate (Mg(CF₃SO₃)₂) with the goal of developing electrolytes for the fabrication of solid-state rechargeable magnesium batteries. In these matrices, short POE chains are covalently bonded to the siloxane network via urethane linkages. The xerogels have been represented by the notation d-Ut(Y) _n Mg(CF₃SO₃)₂, where Y?=?300 and 600 represents the average molecular weight of the POE chains and n stands for salt composition (molar ratio of OCH₂CH₂ units per Mg²⁺). Xerogels with compositions ranging from 2?≤?n?<?∞ were prepared. A crystalline POE/Mg(CF₃SO₃)₂ complex of unknown stoichiometry is formed in the d-Ut(300) _n Mg(CF₃SO₃)₂ materials with n?≤?6 and in the d-Ut(600) _n Mg(CF₃SO₃)₂ materials with n?≤?5. The organically modified silicate electrolytes with the highest conductivity of the d-Ut(300) _n Mg(CF₃SO₃)₂ and d-Ut(600) _n Mg(CF₃SO₃)₂ series are the samples with n?=?6 (3.9?×?10^?8 S cm^?1 at 26 °C and 8.7?×?10^?5 S cm^?1 at 97 °C) and n?=?100 (2.63?×?10^?7 S cm^?1 at 20 °C and 1.4?×?10^?5 S cm^?1 at 85 °C), respectively. Since the electrolytes for Mg batteries that have been proposed up to now have many intrinsic problems and although the room temperature conductivity values exhibited by the systems developed in the present study are still low in view of practical application, this work opens new directions for the development of solid-state Mg ion electrolytes.     

Structural and electrical properties of pure and H<Subscript>2</Subscript>SO<Subscript>4</Subscript> doped (PVA)<Subscript>0.7</Subscript>(NaI)<Subscript>0.3</Subscript> solid polymer electrolyte

Solid polymer electrolytes (SPE) based on poly-(vinyl alcohol) (PVA)_0.7 and sodium iodide (NaI)_0.3 complexed with sulfuric acid (SA) at different concentrations were prepared using solution casting technique. The structural properties of these electrolyte films were examined by X-ray diffraction (XRD) studies. The XRD data revealed that sulfuric acid disrupt the semi-crystalline nature of (PVA)_0.7(NaI)_0.3 and convert it into an amorphous phase. The proton conductivity and impedance of the electrolyte were studied with changing sulfuric acid concentration from 0 to 5.1 mol/liter (M). The highest conductivity of (PVA)_0.7(NaI)_0.3 matrix at room temperature was 10⁻⁵ S cm⁻¹ and this increased to 10⁻³ S cm⁻¹ with doping by 5.1 M sulfuric acid. The electrical conductivity (σ) and dielectric permittivity (ε′) of the solid polymer electrolyte in frequency range (500 Hz–1 MHz) and temperature range (300–400) K were carried out. The electrolyte with the highest electrical conductivity was used in the fabrication of a sodium battery with the configuration Na/SPE/MnO₂. The fabricated cells give open circuit voltage of 3.34 V and have an internal resistance of 4.5 kΩ.     

Microstructure of Cu<Subscript>60</Subscript>Zr<Subscript>20</Subscript>Ti<Subscript>20</Subscript> bulk metallic glass rolled at different strain rates

The structural evolution of Cu₆₀Zr₂₀Ti₂₀ bulk metallic glass during rolling at different strain rates and cryogenic temperature was investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and high-resolution transmission electron microscopy (HRTEM). It is revealed that the deformation-induced transformation is strongly dependent on the strain rate. At the lowest experimental strain rate of 1.0×10⁻⁴ s⁻¹, no phase transformation occurs until the highest deformation degree reaches 95%. In a strain rate range of 5.0×10⁻⁴−5.0×10⁻² s⁻¹, phase separation occurs in a high deformation degree. As the strain rate reaches 5.0×10⁻¹ s⁻¹, phase separation and nanocrystallization concur. The critical deformation degree for occurrence of phase transformation decreases with the strain rate increasing. Supported by the National Natural Science Foundation of China (Grant No. 50471016)     

Fast ionic conduction in cubic hafnium garnet Li<Subscript>7</Subscript>La<Subscript>3</Subscript>Hf<Subscript>2</Subscript>O<Subscript>12</Subscript>

A new member of the family of garnets with fast lithium ion conduction has been found with the composition Li₇La₃Hf₂O₁₂. The anion arrangement corresponds to the oxygen framework in garnets, e.g., in Ca₃Fe₂Si₃O₁₂. Hafnium is coordinated octahedrally while the lanthanum environment can be described as a distorted cube. Lithium occupies a large number of positions with tetrahedral, trigonal planar, and metaprismatic coordination. Li₇La₃Hf₂O₁₂ shows a lithium bulk ion conductivity of 2.4 × 10⁻⁴ Ω⁻¹ cm⁻¹ at room temperature with an activation energy of 0.29 eV.     

A Highly Sensitive and Selective Fluorescent Chemodosimeter for Hg<Superscript>2+</Superscript> in Neutral Aqueous Solution

A fluorescent assay of Hg²⁺ in neutral aqueous solution was developed using N-[p-(dimethylamino)benzamido]-N′-phenylthiourea (1). 1’s fluorogenic chemodosimetric behaviors towards various metal ions were studied and a high sensitivity as well as selectivity was achieved for Hg²⁺. It was because of a strongly fluorescent 1,3,4-oxadiazoles which was produced by the Hg²⁺ promoted desulfurization reaction. The spectra of ESI mass and IR provided evidences for this reaction. According to fluorescence titration, a good linear relationship ranging from 1.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol l⁻¹ was obtained with the limit of detection as 3.1 × 10⁻⁸ mol l⁻¹. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Effect of gamma irradiation on the dielectric properties and electrical conductivity of the TlInS<Subscript>2</Subscript> single crystal

The effect of gamma irradiation on the dielectric properties and ac conductivity of a TlInS₂ single crystal with a layered structure has been investigated in the frequency range from 5 × 10⁴ to 3.5 × 10⁷Hz. It has been shown that gamma irradiation of the TlInS₂ single crystal with a dose of 10⁴–2.25 × 10⁶ rad leads to a considerable increase in the dielectric loss tangent tanδ, the real part ɛ′ and imaginary part ɛ″ of the complex permittivity, and the ac conductivity σ _ac across the layers. It has been established that, for all gamma irradiation doses, the TlInS₂ single crystal is characterized by the dielectric loss due to electrical conduction up to a frequency of 10⁷ Hz and by the relaxation loss at a higher frequency. Irradiation of the TlInS₂ single crystal results in an increase in the dispersion of tan δ, ɛ′, and ɛ″. It has been demonstrated that, as the gamma irradiation dose is accumulated in the TlInS₂ single crystal, the density of localized states near the Fermi level N _F increases (from 5.2 × 10¹⁸ to 1.9 × 10¹⁹ eV⁻¹ cm⁻³).     

Large optical nonlinearity in CaCu<Subscript>3</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12</Subscript> thin films

CaCu₃Ti₄O₁₂ (CCTO) thin films were successfully prepared on LaAlO₃ substrates by pulsed laser deposition technique. We measured the nonlinear optical susceptibility of the thin films using Z-scan method at a wavelength of 532 nm with pulse durations of 25 ps and 7 ns. The large values of the third-order nonlinear optical susceptibility, χ ⁽³⁾, of the CCTO film were obtained to be 2.79×10⁻⁸ esu and 3.30×10⁻⁶ esu in picosecond and nanosecond time regimes, respectively, which are among the best results of some representative nonlinear optical materials. The origin of optical nonlinearity of CCTO films was discussed. The results indicate that the CCTO films on LaAlO₃ substrates are promising candidate materials for applications in nonlinear optical devices.     

Spectroscopic properties of Er<Superscript>3+</Superscript> ions in LiNbO<Subscript>3</Subscript> crystals codoped with HfO<Subscript>2</Subscript>

The results of the spectroscopic analysis of transition strengths for Er³⁺ ions in a series of Hf:Er:LiNbO₃ crystals with variable Hf content and fixed Er content are reported. Unpolarized UV-VIS-NIR absorption spectra, upconversion fluorescence spectra excited at 800 nm, and microsecond time-resolved spectra excited at 400 nm and 800 nm by 800 nm femtosecond laser were measured at room temperature. The HfO₂ incorporation has influence on Er³⁺ radiative lifetimes, and fluorescence branching ratios. For Hf(4 mol %):Er(1 mol %):LiNbO₃, Ω₂=2.63×10^-20 cm², Ω₄=2.86×10^-20 cm², and Ω₆=0.72×10^-20 cm². Ω₂<Ω₄ is contrary to the Er³⁺ general trend of Ω₂>Ω₄>Ω₆ when the Hf content is below its threshold concentration. In addition, the sum of Ω increases with the Hf content when the HfO₂ content below 6 mol % is unfamiliar. The upconversion mechanism is discussed in this work. PACS 71.20.Eh; 77.84.Dy; 42.62.Fi; 42.65.Ky     

Crystal growth,spectroscopic characterization and laser performance of Nd:Lu<Subscript>0.33</Subscript>Y<Subscript>0.36</Subscript>Gd<Subscript>0.3</Subscript>VO<Subscript>4</Subscript> crystal

A new three-matrix mixed vanadate crystal Nd:Lu_0.33Y_0.36Gd_0.3VO₄ (Nd:LuYGdVO₄) crystal was grown by the Czochralski method. Room temperature absorption and fluorescence spectra of the Nd:LuYGdVO₄ crystals were measured and the spectroscopic parameters were calculated by the Judd-Ofelt theory. The intensity parameters of the Nd:LuYGdVO₄ crystal were Ω₂ = 9.736 × 10⁻²⁰ cm², Ω₄ = 4.179 × 10⁻²⁰ cm², Ω₆ = 8.020 × 10⁻²⁰ cm² and the stimulate emission cross section was 5.3 × 10⁻¹⁹ cm². Diodepumped actively Q-switched and passively Q-switched Nd:LuYGdVO₄ and Nd:Lu_0.14Y_0.86VO₄ lasers at 1.06 μm were demonstrated. The results indicate that, for both actively and passively Q-switched lasers, the Nd:LuYGdVO₄ lasers can generate shorter pulse width with higher peak power than the Nd:Lu_0.14Y_0.86VO₄ lasers at the same cavity conditions.     

Photoluminescence of fluoroacrylate polymers impregnated with Eu(bta)<Subscript>3</Subscript> using supercritical CO<Subscript>2</Subscript>

Optical properties (photoluminescence and absorption) of Eu(bta)₃(B) _n (B = H₂O or 1,10-phenanthroline) polycrystalline powders and fluoroacrylate polymers (FAPs) impregnated with these compounds using supercritical CO₂ (SC CO₂) were investigated. It was established that impregnation of Eu(bta)₃phen into the FAPs using an SC CO₂ solution was difficult to achieve. The type of B (ancillary ligand) and the polymer matrix were shown to influence the temperature quenching of photoluminescence of Eu³⁺ ions in the range 25–100°C. A comparative analysis of quantum yields (λ_ex = 300 and 380 nm) and photoluminescence decay times (λ_ex = 337.1 nm) for Eu(bta)₃B _n and for Eu(bta)₃B _n -doped FAPs was performed.     

Optical absorption in layered MnGaInS<Subscript>4</Subscript> single crystals

Optical absorption in MnGaInS₄ single crystals has been studied. Direct and indirect optical transitions are found to occur in the range of photon energies of 2.37–2.74 eV and in the temperature range of 83–270 K. The temperature dependence of the band gap has been determined; its temperature coefficients E _gd and E _gi are −5.06 × 10⁻⁴ and −5.35 × 10⁻⁴ eV/K, respectively. MnGaInS4 single crystals exhibit anisotropy in polarized light at the absorption edge; the nature of this anisotropy is explained.     

<Superscript>29</Superscript>Si MAS-NMR study of oxide conductors derived from the apatite-type La<Subscript>9.33</Subscript>Si<Subscript>6</Subscript>O<Subscript>26</Subscript> compound

The preparation of (La_9.33−2x/3Sr _x □_0.67−x/3)Si₆O₂₄O₂ (0 ≤ x ≤ 2) samples with different amounts of cation vacancies is reported. Structure and unit-cell parameters were deduced by Rietveld analysis of XRD patterns. Structural features that enhance oxygen conductivity in Sr-doped apatites are discussed. Up to three components were detected in ²⁹Si MAS-NMR spectra which change with the amount and distribution of cation vacancies. In general, oxygen conductivity increases with the amount of vacancies at La1 (6h) sites, passing through a maximum for x = 0.4. In the case of activation energy, a minimum is detected near x = 1.2, indicating that entropic and enthalpic change in different ways. The presence of cation vacancies should enhance oxygen hopping along c-axis; however, the analysis of the frequency dependence of conductivity suggests that oxygen motions are produced along three axes.     

Spectroscopic Properties and Energy Transfer Analysis of Tm<Superscript>3+</Superscript>-Doped BaF<Subscript>2</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript> Glass

This paper reports on the spectroscopic properties and energy transfer analysis of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂-La₂O₃ glasses with different Tm₂O₃ doping concentrations (0.2, 0.5, 2.0, 2.5, 3.0, 3.5, 3.5, 4.0 wt%). Mid-IR fluorescence intensities in the range of 1,300 nm−2,200 nm have been measured when excited under an 808 nm LD for all the samples with the same pump power. Energy level structure and Judd-Ofelt parameters have been calculated based on the absorption spectra of Tm³⁺, cross-relaxation rates and multi-phonon relaxation rates have been estimated with different Tm₂O₃ doping concentrations. The maximum fluorescence intensity at around 1.8 μm has been obtained in Tm₂O₃-3 wt% sample and the maximum value of calculated stimulated emission cross-section of Tm³⁺ in this sample is about 0.48 × 10⁻²⁰ cm² at 1,793 nm, and there is not any crystallization peak in the DSC curve of this sample, which indicate the potential utility of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂- La₂O₃ glass for 2.0-μm optical fiber laser.     

Spectroscopic properties of Er<Superscript>3+</Superscript> in Sc:LiNbO<Subscript>3</Subscript> crystal

The results of Er³⁺ ion spectroscopic analysis in Sc:LiNbO₃ crystals were reported. The line strengths from the ground state to the excited state were evaluated from the measured unpolarized absorption spectrum and analyzed by using standard Judd–Ofelt theory. For Sc(3 mol. %):Er (1 mol. %):LiNbO₃ crystal, the obtained intensity parameters are: Ω₂=3.72×10^-20 cm², Ω₄=1.07×10^-20 cm², and Ω₆=0.98×10^-20 cm². The fluorescence spectra and microsecond time-resolved spectra were investigated in the visible region. The excited state absorption transition strengths at 800 nm excitation were evaluated based on Judd–Ofelt theory. The results obtained here were compared to results from other research on Er:LiNbO₃ crystals. PACS 71.20.Eh; 77.84.Dy; 42.70.Hj; 42.62.Fi; 42.65.Ky