Synthesis, crystal structure and reactivity of uranium(IV) complexes with p-tert-butylcalix[4]arene ligands

Reactions of UCl4 with 25,27-dimethoxy-5,11,17,23-tetra-tert-butylcalix[4]arene (H2Me2calix) in THF or pyridine at 80 degrees C gave [UCl2(Me2calix)L2] [L = THF (1) or pyridine (2)]. Similar treatment of U(acac)(4) (acac = MeCOCHCOMe) with H2Me2calix in THF or pyridine afforded [U(acac)2(Me2calix)] (3). The bis-calixarene compound [U(Me2calix)(H2calix)] (4) was obtained by reaction of U(OTf)4 or U(OTf)3 with H2Me2calix in pyridine at 110 degrees C. Treatment of UCl4 with H2Me2calix in pyridine at 110 degrees C gave [Mepy][UCl2(Hcalix)(py)2] (5) resulting from demethylation and acid cleavage of the methoxy groups of the calixarene ligand of 2. Adventitious traces of air were responsible for the formation of [Hpy][Mepy]4[{UCl(calix)}3(mu3-O)][UCl6] (6) during the reaction of UCl4 and H2Me2calix, and of [{U(Me2calix)(mu3-O)LiCl(THF)}2] (7) during the reaction of 2 with tBuLi. The X-ray crystal structures of 1.2THF, 2.2py, 3.0.25L (L = THF and py), 4.2py, 5, 6.3py and 7.THF have been determined.     

Intramolecular direct arylation in an A,C-functionalized calix[4]arene

A recently developed efficient method for intramolecular direct arylation is employed on a doubly functionalized calix[4]arene fixed in the cone conformation. The reaction takes place in high yield leading to meta substituted calix[4]arenes. The functionalities are located at two opposite aromatic rings and the two possible diastereomers are obtained in a 1:1 ratio. Full sets of data including crystal structures for both isomers are presented. The NMR data reveal that even at temperatures up to 120 degrees C both isomers are fixed in a flattened cone conformation with the substituted aromatic units pointing outwards.     

The structure and thermodynamics of calix[n]arene complexes with dipyridines and phenanthroline in aqueous solution studied by microcalorimetry and NMR spectroscopy

The complex stability constants (K(S)) and thermodynamic parameters (DeltaH degrees and TDeltaS degrees) for 1:1 intermolecular complexation of three water-soluble calixarenes, that is, p-sulfonato calix[4]arene (C4AS), p-sulfonato thiacalix[4]arene (TCAS), and p-sulfonato calix[5]arene (C5AS), with dipyridines (4-DPD and 2-DPD) and 1,10-phenanthroline (Phen) have been determined by means of titration microcalorimetry in an acidic buffer solution (pH = 2.0) at 298.15 K, and their binding modes have been investigated by (1)H NMR and 2D ROESY NMR spectroscopy. The results obtained indicate that 4-DPD, 2-DPD, and Phen are included in the cavity of C5AS with the different patterns, this is, accumbent for 4-DPD, acclivitous for 2-DPD and Phen, while Phen is included upright in the cavity of C4AS. The K(S) values decrease with increasing cavity size of host molecules but enhance with extending conjugation degree of guest molecules, and thus C4AS exhibits an exceptionally high Phen/4-DPD selectivity of 22.5. Thermodynamically, the complexation of DPDs/Phen with the water-soluble calixarenes is obviously enthalpy-driven, but the molecular selectivity is mainly governed by the entropy term.     

Luminescence behavior of a water soluble calix[4]arene derivative complex with terbium ion(III) in gelation solution

The complexation luminescence behavior of a water soluble calix[4]arene derivative, 5,11,17,23-tetra-sulfonate-25,26,27,28-tetra-carboxymethoxycalix[4]arene (L) with lanthanoid ion (Tb(3+)) has been investigated in gelation solution at 25 degrees C by using UV-vis and fluorescence spectra. The results obtained indicated that the water soluble calix[4]arene derivative can form an efficient energy transfer complex with terbium ion(III). The fluorescence of L x Tb(3+)complex is partially quenched by gelatin in gelation solution. The quenching intensity is related to the concentration and the hydrolysis degree of gelatin. Absorption and fluorescence spectra analysis show that the -COO(-) groups on gelatin have a definite binding ability to Tb(3+), and then, gelatin could compete binding with calix[4]arene derivative upon complexation with Tb(3+), leading to the relative fluorescence quenching of the formation complex of terbium(III) ion with calix[4]arene derivative.     

Thermal transitions in the bilayer assembly of dimyristoylphosphatidylglycerol sodium salt dispersion in water: a new phase transition through an intermediate state

The thermal properties of the dispersion of sodium salt of dimyristoylphosphatidylglycerol (NaDMPG) in water have been investigated as functions of incubation temperature and aging time by DSC, XRD, sodium ion activity, pH, zeta-potential, and IR measurements. The DSC charts for NaDMPG dispersions incubated below 30 degrees C showed an endothermic peak at 31.7 degrees C with a small shoulder peak at Tm (gel-liquid crystal transition temperature: 23.5 degrees C). The temperature of 31.7 degrees C coincides with the T* temperature at which a high-order transition in the NaDMPG bilayer assembly has been found to occur in our previous studies. However, no peak was observed for the dispersions incubated above 32 degrees C. These results indicate that thermal properties of NaDMPG bilayers definitely differ below and above the T* temperature. The dispersion which had been once incubated at 40 degrees C for 24 h never showed the endothermic peak at T* even after the further aging at 3 degrees C for 12-day. Namely, the NaDMPG bilayer assembly exhibits an intensive thermohysteresis. The XRD charts for the NaDMPG dispersions incubated at 25 degrees C showed a sharp X-ray diffraction pattern corresponding to the repeat distance of d = 4.75 nm regardless of their aging time, while the dispersions incubated at 40 degrees C had no diffraction peak until 9-day elapsed. After 10-day aging at 40 degrees C, however, a diffraction peak corresponding to d = 5.55 nm clearly appeared. In the DSC measurements for the dispersion incubated at 40 degrees C, a few endothermic peaks began to appear between Tm and T* after approximately 7-day aging. Then, they shifted toward higher temperatures and finally converged into a single peak at 40-42 degrees C after 14-day aging. These XRD and DSC peaks observed after a long period of aging time above T* suggest that conformations of the hydrophilic groups and the hydrocarbon chains in the NaDMPG bilayers take a more tight and closer arrangement very slowly via an intermediate state above T*, and a new gel phase of the bilayers is consequently formed, the transition temperature (T(I) temperature) of which is 40-42 degrees C. A molecular interpretation for such transition processes in the bilayer assembly of NaDMPG dispersions has been proposed on the basis of pH, sodium ion activity, zeta-potential, IR data, etc.     

A new calix[5]arene-based container: selective extraction of higher fullerenes

[reaction: see text] A new double calix[5]arene successfully extracts higher fullerenes from fullerene mixtures. The syn isomer of the double calix[5]arene selectively captures higher fullerenes from fullerene mixtures. The elevation of the temperature more than 100 degrees C stimulates its conformational change to the anti isomer, bringing liberation of the captured higher fullerenes.     

Molybdocalixarene structure control via rim deprotonation. synthesis, characterization, and crystal structures of calix[4]arene Mo(VI) monooxo complexes and calix[4]arene alkali metal/Mo(VI) dioxo complexes

We report a series of calix[4]arene Mo(VI) dioxo complexes M2RC4MoO2 (M = alkali metal, R = H or Bu(t)) that were fully characterized by NMR, X-ray, IR, UV/vis, and elemental analysis. Molybdocalix[4]arene structures can be controlled via lower rim deprotonation, groups at para positions of calix[4]arene, and alkali metal counterions. Mono deprotonation at the lower rim leads to calix[4]arene Mo(VI) monooxo complexes RC4MoO (R = H, Bu(t), or allyl), and full deprotonation gives rise to calix[4]arene Mo(VI) dioxo complexes. Structural studies indicate that HC4 Mo(VI) dioxo complexes easily form polymeric structures via cation-pi interaction and coordination between different calixarene units. However, Bu(t)C4 Mo(VI) dioxo complexes tend to form dimers or tetramers due to steric hindrance of the tert-butyl groups at para positions in calixarene. The structures of the reduced side products A and C were determined by X-ray diffraction studies. The mechanism of RC4MoO formation from the reaction of calixarene monoanions with MoO2Cl2 appears to include the addition of a calixarene -OH group across a Mo=O bond.     

Inclusion of naturally occurring amino acids in water soluble calix[4]arenes: a microcalorimetric and 1H NMR investigation supported by molecular modeling

The thermodynamic parameters for the inclusion of some naturally occurring amino acids into a series of p-sulfonated calix[4]arenes, were determined via both 1H NMR and calorimetric titrations in buffered aqueous solution at 25 degrees C. The calorimetric data show that inclusion is enthalpically driven in all cases, regardless of flexibility of the host and the nature of the guest. The most efficient receptor is the calix[4]arene tetrasulfonate 1, which exists in solution at pH 7 in a cone conformation, stiffened by H-bonding at the lower rim.Molecular mechanics data help in the understanding of why some hosts do not form inclusion complexes at all. The comparison of our data with literature reports shows that there are dramatic buffer-dependent changes in the binding affinities.     

Surface grafting and reactivity of calixarene-based receptors and pseudorotaxanes on Si(100)

The first report is given here on the anchoring on H-Si(100) of calix[4]arenes and calix[6]arene-based pseudorotaxanes, versatile building blocks for molecular devices. Covalent functionalization on Si was reached through a wet chemistry recipe, by making use of an extra-mild photochemical activation via visible light of C=C terminated anchoring arms. Our approach largely preserves the integrity of the molecular substrate, also allowing for a full monolayer of pseudorotaxane to be formed on Si(100). Molecular adhesion has been demonstrated by the presence and quantitation of XPS signals from specific elements in the molecules. AFM measurements performed on Si(100)/calix[4]arenes have revealed structures 2.3 nm high, consistent with the length of the molecule. The availability of the calix[4]arene cavity to host further species after anchoring on Si has been demonstrated by the successful complexation reaction with Cs(+) ions, resulting in a 1:1 calix/Cs(+) ratio, and with N-methyl pyridinium iodide. A pseudorotaxane species, composed of a calix[6]arene wheel derivatised with N-phenylureido groups on the upper rim and a viologen (4,4'-bipyridinium) containing axle, has been anchored on Si(100) via the C=C termination of the axle. We demonstrated the self-assembling of this pseudorotaxane covalently bound by use of XPS.     

Viscosity measurements of water at high temperatures and pressures using dynamic light scattering

The application of dynamic light scattering to measure viscosity of water at high temperatures and pressures is demonstrated. Viscosity was obtained from the translational diffusion coefficient of probe particles dispersed in the medium by the Einstein-Stokes relationship. Measurements were carried out with polystyrene latex, colloidal silica, and colloidal gold. Under a constant pressure of 25 MPa, good agreement was found between the measured and calculated viscosities up to 275 degrees C with the polystyrene latex, 200 degrees C with the colloidal silica, and 297 degrees C with the colloidal gold. It was found that failure of the measurements at high temperatures is ascribed to change in either the dispersion stability or chemical stability of the probe particles. The present results indicate that the technique could also be used for other supercritical fluids having high critical temperature and pressure, such as methanol (T(c) = 239.4 degrees C, P(c) = 8.1 MPa) and ethanol (T(c) = 243.1 degrees C, P(c) = 6.4 MPa).     

A dinuclear cobalt(II) complex of calix[8]arenes exibiting strong magnetic anisotropy

The solvothermal reaction of cobalt(II) acetate with p-tert-butylcalix[8]arene (calix) and triethylamine affords the compound (Et3NH)2 [CoII2(calix)2] (.2Et3NH) that shows a hydrogen bond bridged dinuclear complex [CoII2(calix)2]2- () with cobalt(II) ions in a tetrahedral geometry. The compound crystallises in the monoclinic, space group P2(1)/n with cell parameters a=14.89(1) A, b=20.90(2) A, c=30.87(4) A, beta=102.57(7) degrees, V=9376(16) A3, Z=2. The magnetic studies together with ab initio calculations are evidence of an important role of the geometry of the second coordination sphere of carbon and hydrogen atoms around the CoO4 core in quantifying the zero field splitting on cobalt sites. This results in strong magnetic anisotropies with a negative axial component on the cobalt fragments.     

Thermodynamics of adsorption of imidacloprid at constant charge hydrophobic surfaces: physicochemical aspects of bioenvironmental activity

Adsorption of the insecticide 1-(6-chloro-3-pyridylmethyl)-N-nitroimidazolidin-2-ylideneamine (Imidacloprid) on the hanging mercury drop electrode (HMDE) surface was studied by temperature-dependent stripping voltammetry (TD-SV). At near physiological pH, under reducing conditions, the Gibbs free energy of adsorption, DeltaGADS, shows two distinct temperature-dependent regimes. (a) At 0 degrees < T < 10 degrees C a temperature-independent mechanism occurs with a constant DeltaGADS = -40.5 kJ/mol, resulting in strong chemisorption at high surface coverage. For T < 10 degrees C a considerable enthalpy gain is estimated, and this represents the driving force for the adsorption of Imidacloprid onto the electrode surface. (b) At T > 10 degrees C a temperature-dependent mechanism is operative with DeltaGADS/DeltaT = -91.4 J/K mol, resulting in a rapid weakening of adsorption and low surface coverage. On the basis of the present findings we suggest that the strong chemisorption at T < 10 degrees C at physiological pH under reducing conditions is related to the high specific insecticide activity of Imidacloprid in cool-blooded insects as contrasted to its low efficiency in warm-blooded organisms.     

Synthesis and reactivity of calix[4]arene-supported group 4 imido complexes

New mononuclear titanium and zirconium imido complexes [M(NR)(R'(2)calix)] [M=Ti, R'=Me, R=tBu (1), R=2,6-C(6)H(3)Me(2) (2), R=2,6-C(6)H(3)iPr(2) (3), R=2,4,6-C(6)H(2)Me(3) (4); M=Ti, R'=Bz, R=tBu (5), R=2,6-C(6)H(3)Me(2) (6), R=2,6-C(6)H(3)iPr(2) (7); M=Zr, R'=Me, R=2,6-C(6)H(3)iPr(2) (8)] supported by 1,3-diorganyl ether p-tert-butylcalix[4]arenes (R'(2)calix) were prepared in good yield from the readily available complexes [MCl(2)(Me(2)calix)], [Ti(NR)Cl(2)(py)(3)], and [Ti(NR)Cl(2)(NHMe(2))(2)]. The crystallographically characterised complex [Ti(NtBu)(Me(2)calix)] (1) reacts readily with CO(2), CS(2), and p-tolyl-isocyanate to give the isolated complexes [Ti[N(tBu)C(O)O](Me(2)calix)] (10), [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [Ti[N(tBu)C(O)N(-4-C(6)H(4)Me)](Me(2)calix)] (13). In the case of CO(2) and CS(2), the addition of the heterocumulene to the Ti-N multiple bond is followed by a cycloreversion reaction to give the dinuclear complexes 11 and 12. The X-ray structure of 13.4(C(7)H(8)) clearly establishes the N,N'-coordination mode of the ureate ligand in this compound. Complex 1 undergoes tert-butyl/arylamine exchange reactions to form 2, 3, [Ti(N-4-C(6)H(4)Me)(Me(2)calix)] (14), [Ti(N-4-C(6)H(4)Fc)(Me(2)calix)] (15) [Fc=Fe(eta(5)-C(5)H(5))(eta(5)-C(5)H(4))], and [[Ti(Me(2)calix)](2)[mu-(N-4-C(6)H(4))(2)CH(2)]] (16). Reaction of 1 with H(2)O, H(2)S and HCl afforded the compounds [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [TiCl(2)(Me(2)calix)] in excellent yields. Furthermore, treatment of 1 with two equivalents of phenols results in the formation of [Ti(O-4-C(6)H(4)R)(2)(Me(2)calix)] (R=Me 17 or tBu 18), [Ti(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (19) and [Ti(mbmp)(Me(2)calix)] (20; H(2)mbmp=2,2'-methylene-bis(4-methyl-6-tert-butylphenol) or CH(2)([CH(3)][C(4)H(9)]C(6)H(2)-OH)(2)). The bis(phenolate) compounds 17 and 18 with para-substituted phenolate ligands undergo elimination and/or rearrangement reactions in the nonpolar solvents pentane or hexane. The metal-containing products of the elimination reactions are dinuclear complexes [[Ti(O-4-C(6)H(4)R)(Mecalix)](2)] [R=Me (23) or tBu (24)] where Mecalix=monomethyl ether of p-tert-butylcalix[4]arene. The products of the rearrangement reaction are [Ti(O-4-C(6)H(4)Me)(2) (paco-Me(2)calix)] (25) and [Ti(O-4-C(6)H(4)tBu)(2)(paco-Me(2)calix)] (26), in which the metallated calix[4]arene ligand is coordinated in a form reminiscent of the partial cone (paco) conformation of calix[4]arene. In these compounds, one of the methoxy groups is located inside the cavity of the calix[4]arene ligand. The complexes 24, 25 and 26 have been crystallographically characterised. Complexes with sterically more demanding phenolate ligands, namely 19 and 20 and the analogous zirconium complexes [Zr(O-4-C(6)H(4)Me)(2)(Me(2)calix)] (21) and [Zr(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (22) do not rearrange. Density functional calculations for the model complexes [M(OC(6)H(5))(2)(Me(2)calix)] with the calixarene possessing either cone or partial cone conformations are briefly presented.     

Synthesis of （p-Formylphenyl）azo Calix[4]arenes

Five novel azo calix[4]arenes were reported. The p-aminobenzaldehyde was diazotized with sodium nitrite in aqueous hydrochloride solution. Mono-, bis-, tris- and tetrakis(p-formylphenyl)azo calix[4]arenes (including proximal and distal isomers) were obtained respectively by diazo-coupling in different molar ratio to calix[4]arene(1) under pH=7.5--8.5 at 0-5℃. All (p-formylphenyl)azo calix[4]arenes were characterized by ^1H NMR, ^13C NMR, IR, MS (ESIMS) spectroscopies and elemental analysis.     

Thermodynamic stability of hydrogen-bonded nanostructures: a calorimetric study

The self-assembly of hydrogen-bonded aggregates (rosettes) in solvent mixtures of different polarity has been studied by calorimetry. The C(50) parameter, the concentration when 50 % of the components are incorporated in the assembly, is used to compare assemblies with different stoichiometry. C(50) for the single rosette 1(3).(BuCYA)(3) (1=N,N-di(4-tert-butylphenyl)melamine; BuCYA=n-butylcyanuric acid) in 1,2-dichloroethane is 25 microM, whereas for double rosettes 2 a(3).(BuCYA)(6) and 2 b(3).(BuCYA) (2=calix[4]arene-dimelamine) it is 0.7 and 7.1 microM, respectively. DeltaG degrees, DeltaH degrees, and TDeltaS degrees values indicate that the thermodynamics of double rosettes reflect the independent assembly of two individual single rosette structures or two rosettes reinforced by additional stabilizing interactions. In more polar solvents the stability of double rosettes decreases. From the correlation of DeltaG degrees with solvent polarity it is predicted that it should be possible to assemble double rosettes in methanol or water. The assembly of 2 b(3).(BuCYA)(6) in 100 % MeOH was proven by (1)H NMR and CD spectroscopy.     

Temperature- and length-dependent energetics of formation for polyalanine helices in water: assignment of w(Ala)(n,T) and temperature-dependent CD ellipticity standards

Length-dependent helical propensities w(Ala)(n,T) at T = 10, 25, and 60 degrees C are assigned from t/c values and NMR 13C chemical shifts for series 1 peptides TrpLys(m)Inp2(t)Leu-Ala(n)(t)LeuInp2Lys(m)NH2, n = 15, 19, and 25, m = 5, in water. Van't Hoff analysis of w(Ala)(n,T) show that alpha-helix formation is primarily enthalpy-driven. For series 2 peptides Ac-Trp Lys5Inp2(t)Leu-(beta)AspHel-Ala(n)-beta-(t)LeuInp2Lys5NH2, n = 12 and 22, which contain exceptionally helical Ala(n) cores, protection factor-derived fractional helicities FH are assigned in the range 10-30 degrees C in water and used to calibrate temperature-dependent CD ellipticities [theta](lambda,H,n,T). These are applied to CD data for series 1 peptides, 12 < or = n < or = 45, to confirm the w(Ala)(n,T) assignments at T = 25 and 60 degrees C. The [theta](lambda,H,n,T) are temperature dependent within the wavelength region, 222 +/- 12 nm, and yield a temperature correction for calculation of FH from experimental values of [theta](222,n,T,Exp).     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

Alkali and alkaline-earth-metalated forms of calix[4]arenes: synthons in the synthesis of transition metal complexes

This is the first coherent report on the metalation of calix[4]arene by alkali and alkaline-earth metals, thus providing a high-yield production of appropriate synthons for the synthesis of transition metal calix[4]arenes. In addition, various facets of the coordination chemistry by calix[4]arene anions of alkali and alkaline-earth metal ions have been singled out. Among them: 1) the exo and endo coordination of metal ions by the calix[4]arene skeleton; 2) the pi solvation of the ions by the phenyl rings; 3) the ion-carrier properties of metallacalix[4]arenes; 4) the simulation of the kinetically labile coordination sphere of alkali and alkaline-earth metal ions by a polyoxo rigid skeleton. The peculiarities of the complexation of alkali and alkaline-earth metal ions by calix[4]arenes outlined are deduced from the synthesis and the structural characterization both in solution ((1)H NMR) and in the solid state (X-ray structure analysis) of the following classes of compounds: 1) [p-tBu-calix[4](OMS(n))(4)](2) (M=Li, Na, K); 2) [p-tBu-calix[4](OR)(2)(O)(2)ML] (M=Mg, L=THF, R=C(5)H(9); M=Ca, L=TMEDA (tetramethylethylenediamine), R=C(5)H(9); M=Ca, L=DME (dimethoxyethane), R=C(5)H(9); M=Ba, L=TMEDA, R=C(5)H(9); M=Ba, L=none, R=C(5)H(9)); 3) [p-tBu-calix[4](OC(5)H(9))(2)(O)(2)Ca(2)I(2)(MeCN)(2)]; 4) [(p-tBu-calix[4](OR)(2)(O)(2))(2)BaNa(2)].     

Thermodynamic dissociation constants of isocaine, physostigmine and pilocarpine by regression analysis of potentiometric data

Concentration and mixed dissociation constant(s) of three drug acids, H(J)L, isocaine, physostigmine and pilocarpine, at various ionic strengths, I, in the range 0.03-0.81 and 25 degrees C have been determined with the use of regression analysis of potentiometric titration data when common parameter, pK(a), and group parameters E'(0), L(0), and H(T) are simultaneously refined. Internal calibration of the glass electrode cell in the concentration scale [H(+)] performed during titration was used. The estimate of ill-conditioned group parameters has a great influence on a systematic error in estimated pK(a) and therefore it makes the computational strategy important. As more group parameters are refined and a better fit achieved, a more reliable estimate of dissociation constants results. The thermodynamic dissociation constant, pK(a)(T), an ill-conditioned ion-size parameter, ?, and the salting-out coefficient, C, were estimated by non-linear regression of {pK(a), I} data and an extended Debye-Hückel equation. The goodness-of-fit test based on regression diagnostics is a measure of the reliability of parameters, and proves that reliable estimates for isocaine pK(a)(T)(=)8.96(1), ?=8(3) A and C=0.50(3) at 25 degrees C, for physostigmine pK(a)(T)(=)8.07(3), ?=19(26) A and C=0.64(3) at 25 degrees C, and for pilocarpine pK(a)(T)(=)7.00(1), ?=7(1) A and C=0.53(2) at 25 degrees C were found.     

Thermally induced sign change of Soret coefficient for dilute and semidilute solutions of poly(N-isopropylacrylamide) in ethanol

We studied the thermal diffusion behavior of poly(N-isopropylacrylamide) (PNiPAM) in ethanol in a temperature range from T = 14.0 degrees C to T = 40.0 degrees C by means of thermal diffusion forced Rayleigh scattering. The obtained Soret coefficient S(T) of PNiPAM was positive for lower temperatures (T < 34 degrees C), while S(T) showed a negative value for higher temperatures (T > 34 degrees C). This means PNiPAM molecules move to the cold side for temperatures T < 34 degrees C, whereas they move to the warm side for T > 34 degrees C. This is the first nonaqueous polymeric system for which a sign change with temperature has been observed. We performed static and dynamic light scattering experiments in the same temperature range. The second virial coefficient determined from dilute solutions by static light scattering (SLS) was positive in the comparable temperature range. The results of SLS for the semidilute solution showed a strong repulsion among PNiPAM chains which was enhanced by increasing temperature. These results imply that the observed thermally induced sign change of S(T) does not depend on the intermolecular interactions among PNiPAM chains.