Adsorption of antimony(III) and antimony(V) on bentonite: Kinetics, thermodynamics and anion competition

This research attempted to study the adsorption of Sb(III) and Sb(V) on bentonite using batch experiments. The effects of reaction time, temperature, initial Sb concentration, and competitive anions at different concentrations on the adsorption of Sb(III) and Sb(V) were investigated. Kinetic studies suggested that the adsorption equilibriums for both Sb(III) and Sb(V) were reached within 24 h. The desorption of Sb adsorbate on the bentonite was observed following Sb(III) adsorption, probably due to the oxidation of Sb(III) on the bentonite surface and subsequent desorption of Sb(V). In addition, oxidation of Sb(III) can occur in the solution medium also, which decreases the concentration of Sb(III) in the solution thereby driving the equilibrium in the direction of desorption from the surface. The adsorption data at three temperatures were successfully modeled using Langmuir (r² > 0.82) and Freundlich (r² > 0.99) isotherms. The thermodynamic parameters (ΔG⁰, ΔH⁰, and ΔS⁰) were calculated from the temperature dependence, suggesting that the adsorption process of Sb(III) is spontaneously exothermic, while the adsorption process of Sb(V) is spontaneously endothermic. Competitive anions such as , , and hardly affected the Sb(III) adsorption on bentonite, while and could compete with for adsorption sites. The competition between and on adsorption sites was presumably due to the formation of surface complexes and the surface accumulation or precipitation of on bentonite surface.     

Cu(II) complex of an abiotic receptor as highly selective fluorescent sensor for acetate

A copper complex having quinoline moiety as fluorophore has been synthesized. The anion recognition behavior of the receptor and its copper complex has been studied in acetonitrile and in acetonitrile: H₂O (95:5 v/v). The copper complex shows high selectivity toward acetate over other anions studied such as F⁻, Cl⁻, Br⁻, I⁻, OAc⁻, dl-malate, l-mandelate, benzoate, isophthalate, , and .     

Hetero dimer from tetrakisammonium cavitand and tetratopic crown ether cavitand

Hetero dimer between tetrakis(m-ammonium)cavitand and tetrakis(dibenzo-25-crown-8)cavitand 5 was formed in CDCl₃ at room temperature. The effects of solvent polarity and temperature on the stability of were studied and the thermodynamic parameters for the formation of are , ΔH⁰ = −67.4 kcal mol⁻¹ and ΔS⁰ = −201.6 cal mol⁻¹ K⁻¹.     

Determination of chromium, cadmium and lead in food-packaging materials by axial inductively coupled plasma time-of-flight mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) with a time-of-flight (TOF) analyser was used for the determination of chromium, cadmium and lead in six food-packaging materials (paper and paper board). The samples (0.20-0.25 g) were digested in concentrated nitric acid in a high pressure microwave oven at 180 °C within 15 min. Two different plasma conditions were applied: cool plasma conditions (0.76 kW; 0.85, 0.89 and 15.5 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of chromium and normal plasma conditions (1.21 kW; 0.66, 0.68 and 13.6 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of cadmium and lead. External calibration was used in combination with rhodium (40 ng g⁻¹) as an internal standard. The detection limits (DL = 3S.D./sensitivity) under the conditions used corresponded to 0.01 ng g⁻¹ (), 0.06 ng g⁻¹ (), 0.07 ng g⁻¹ (), 0.03 ng g⁻¹ () and 0.02 ng g⁻¹ ( and ). The precision (R.S.D.) for six replicate determinations (10 s integration time) of 1 and 10 ng g⁻¹ of each analyte varied from 0.72% () to 4.43% (). The contents of chromium, cadmium and lead in the examined materials were evaluated using the signals of , and . They were in the range: 0.25-0.50 μg g⁻¹ for Cr, not detected (nd) to 0.12 μg g⁻¹ for Cd and 0.28-0.35 μg g⁻¹ for Pb in paper and 0.50-0.64 μg g⁻¹ for Cr, nd to 0.09 μg g⁻¹ for Cd and 0.67-0.99 μg g⁻¹ for Pb in paper board.     

Comparison of methods for the determination of total selenium in plasma by magnetic sector inductively coupled plasma mass spectrometry

Three sample preparation methods (dilution, microwave digestion and ethanol addition) were evaluated for the determination of Se in human plasma using magnetic sector inductively coupled plasma mass spectrometry (ICP-MS). A number of instrumental parameters were also considered, namely the choice of internal standard (Sc, Rh, In) and pre-defined spectral resolution (m/Δm ∼300 (low resolution, LR) and ∼7500 (high resolution, HR)). The isotopes and were selected for analysis avoiding the major and unresolvable Ar dimer interferences associated with other Se isotopes.Ethanol addition was found to be the most suitable and reliable sample preparation method. The optimum ethanol concentration for a 1+9 dilution of the plasma sample was 0.5% (v/v). Indium or Sc were selected over Rh as internal standards as Seronorm™ Level 1 target values were achieved at lower concentrations of ethanol modifier. Representative ICP-MS detection limits for this method using (HR) and (HR), were 0.1 and 0.2 μg l⁻¹.Accurate analysis of Se in Seronorm™ Level 1 (MI0181) was found using either or and HR (86±5 and 83±5 μg l⁻¹ respectively, n=5, In internal standard, target value=83±6 μg l⁻¹). Although offering improved precision (e.g. LR: 0-3% versus HR: 1-6%), accurate results were only obtained with LR for the Seronorm™ Level 1 sample when using (86±1 μg l⁻¹). The major interference precluded accurate Se analysis using and LR for all samples considered. Reliable Se concentrations were only found for a “real” pooled sample when using (HR), in part a result of non-negligible and unresolved interference when using LR. Consistently elevated Se concentrations were found under all conditions when Seronorm™ Level 2 (NO0371) was analysed. These results were confirmed by independent GF-AAS analysis.Magnetic sector ICP-MS with (HR), in combination with the ethanol addition sample preparation method, was used for the analysis of Se in human plasma samples as part of a small pilot study. Average measured selenium concentrations were 102±18 μg l⁻¹ (n=18).     

Synthesis and crystal structure of the isotypic rare earth thioborates Ce[BS3], Pr[BS3], and Nd[BS3]

The orthothioborates Ce[BS₃], Pr[BS₃] and Nd[BS₃] were prepared from mixtures of the rare earth (RE) metals together with amorphous boron and sulfur summing up to the compositions CeB₃S₆, PrB₅S₉ and NdB₃S₆. The following preparation routes were used: solid state reactions with maximum temperatures of 1323 K and high-pressure high-temperature syntheses at 1173 K and 3 GPa. Pr[BS₃] and Nd[BS₃] were also obtained from rare earth chlorides RECl₃ and sodium thioborate Na₂B₂S₅ by metathesis type reactions at maximum temperatures of 1073 K. The crystal structure of the title compounds was determined from X-ray powder diffraction data. The thioborates are isotypic and crystallize in the orthorhombic spacegroup Pna2₁ (No. 33; Z=4; Ce: , , ; Pr: , , ; Nd: , , ) . The crystal structures contain isolated [BS₃]^3‐ groups with boron in trigonal-planar coordination. The sulfur atoms form the vertices of undulated kagome nets, which are stacked along [100] according to the sequence ABAB. Within these nets every second triangle is occupied by boron and the large hexagons are centered by rare earth ions, which are surrounded by overall nine sulfur species.     

A new fluorescent metal sensor with two binding moieties

A new fluorescent chelator Oxa, having two metal-binding sites, was designed and synthesized in six steps. Oxa exhibited two distinctive dissociation constants for Zn²⁺ ( μM and  μM), with considerable fluorescence increase in aqueous buffer at pH 7.2. Affinities of Oxa for the other biologically important ions such as Ca²⁺ ( μM and  mM) and Mg²⁺ ( μM and could not be determined) in the same conditions were also obtained.     

Crystal growth, characterization and physical properties of PrNiSb3, NdNiSb3 and SmNiSb3

The crystal structures of three new intermetallic ternary compounds in the LnNiSb₃ (Ln=Pr, Nd and Sm) family have been characterized by single crystal X-ray diffraction. PrNiSb₃, NdNiSb₃ and SmNiSb₃ all crystallize in an orthorhombic space group, Pbcm (No. 57), Z=12, with , , , and ; , , , and ; and , , , and , for Ln=Pr, Nd and Sm, respectively. These compounds consist of rare-earth atoms located above and below layers of nearly square, buckled Sb nets, along with layers of highly distorted edge- and face-sharing NiSb₆ octahedra. Resistivity data indicate metallic behavior for all three compounds. Magnetization measurements show antiferromagnetic behavior with (PrNiSb₃), 4.6 K (NdNiSb₃), and 2.9 K (SmNiSb₃). Effective moments of 3.62 μ_B, 3.90 μ_B and 0.80 μ_B are found for PrNiSb₃, NdNiSb₃ and SmNiSb₃, respectively, and are consistent with Pr³⁺ (f ²), Nd³⁺ (f ³), and Sm³⁺ (f ⁴).     

Syntheses of [F]5-fluoro-3-nitro-l-tyrosine

The detection of 3-nitro-l-tyrosine has been used as a biomarker of “reactive nitrogen species” in biological matrices and has been an ongoing challenge in analytical chemistry. In this work, fluorine-18 labelled 5-fluoro-3-nitro-l-tyrosine (FNT) was synthesized as a potential radiotracer to probe the biological fate of 3-nitro-l-tyrosine. The synthesis of []FNT was carried out by reaction of []3-fluoro-l-tyrosine with NaNO₃ in TFA solvent for 5 min at 4 °C. The radiochemical yield (RCY) of []FNT was 96±2% and []3-fluoro-l-tyrosine, was 29±1%, relative to []3-fluoro-l-tyrosine and []F₂, respectively. The syntheses of []FNT were also accomplished by direct fluorination of 3-nitro-l-tyrosine with []F₂ and by nitration of l-tyrosine with NaNO₃, followed by fluorination, in TFA (4 °C) or anhydrous HF (−65 °C) solvent. The latter two synthetic routes produced []FNT in 13.5±1.5% RCY, within 1 h. Products were characterized by use of , and NMR spectroscopy and mass spectrometry.     

A highly selective fluorescent chemosensor for dihydrogen phosphate via unique excimer formation and PET mechanism

A new fluorescent chemosensor bearing two imidazolium groups as well as two anthracene groups has been synthesized. This chemosensor displayed a highly selective fluorescence quenching effect and a unique excimer peak only with . The association constant of 1 with was calculated as >10⁶ M⁻¹.     

A novel calix[4]arene-based neutral semicarbazone receptor for anion recognition

A series of novel calix[4]arene-based neutral semicarbazone and thiosemicarbazone receptors have been synthesized and characterized. The molecular receptor 4a recognizes in preference to other anions (Cl⁻, Br⁻, I⁻, , and ) through a 1:1 binding-stoichiometry.     

Syntheses, crystal and electronic structure, and some optical and transport properties of LnCuOTe (Ln=La, Ce, Nd)

Three new compounds, LaCuOTe, CeCuOTe, and NdCuOTe, have been synthesized from the respective rare-earth elements, CuO, and a KI flux at 1023 K. The compounds, which have the ZrSiCuAs structure type, are isostructural to LaCuOS, and crystallize in space group P4/nmm of the tetragonal system with two formula units in cells of dimensions at 153 K of , , for LaCuOTe; , , for CeCuOTe; and , , for NdCuOTe. The structure of LnCuOTe (Ln=La, Ce, Nd) is composed of alternating PbO-like [Ln₂O₂] and anti-PbO-like [Cu₂Te₂] layers stacked perpendicular to [0 0 1]. The experimental optical band gaps of LaCuOTe and NdCuOTe are 2.31 and 2.26 eV, respectively. At 298 K the electrical conductivity of LaCuOTe is 1.65 S/cm and the Hall mobility is +80.6 cm² V⁻¹ s⁻¹. The positive values of the Seebeck and Hall coefficients indicate p-type electrical conduction. First-principles theoretical calculations were performed on LaCuOQ (Q=S, Se, Te). In LaCuOTe, Cu 3d and Te 5p orbitals dominate the states near the valence band maximum; the states near the conduction band minimum are composed of Cu 4s, Te 5p, and La 5d orbitals. The larger dispersion of Cu 3d orbitals and the presence of Te 5p orbitals near the valence band maximum are responsible for the larger hole mobility of LaCuOTe compared to LaCuOS and LaCuOSe.     

Determination of arsenic, iron and selenium in moss samples using hexapole collision cell, inductively coupled plasma-mass spectrometry

Different collision gases (H₂, He and premixed 7% H₂ in He) used in the hexapole collision cell of an inductively coupled plasma-mass spectrometer (ICP-MS) were compared, and the gas-flow rates were optimized for the determination of arsenic (), iron () and selenium (). The study showed that the argon-based interferences at mass-to-charge ratios (m/z) of 56, 75 and 80 can be overcome by the optimized gas flows (7.5 ml min⁻¹ premixed 7% H₂ in He and 2 ml min⁻¹ H₂) in the hexapole collision cell. Detection limits of 15.5 ng l⁻¹ for iron () and 29 ng l⁻¹ for selenium () in 2% (v/v) HNO₃ were obtained under optimized collision cell conditions. The detection limit for arsenic () obtained in difficult hydrochloride acid matrix (5% HCl (v/v)) was 153 ng l⁻¹. The accuracy of the optimized method was confirmed by analyzing two moss reference materials. The results obtained by ICP-MS for arsenic, selenium and iron from both moss reference samples were, in most cases, in good agreement with the certified values.     

Adamantane-dipyrromethanes: novel anion receptors

New adamantane-dipyrromethanes (AdD 1-4) were synthesized and their anion binding properties investigated. AdD 1-3 form 2:1 complexes with F⁻ (AdD:F = 2:1) characterized by high association constants, and 1:1 complexes with Cl⁻, Br⁻, and . The binding of Cl⁻, Br⁻, and by AdD 1-3 is 2-3 times stronger than for the reference compound, meso-phenyldipyrromethane (5). However, AdD 4 forms complexes with F⁻ characterized by 1:1 and 1:2 stoichiometry (AdD:F = 1:2).     

Determination of sulfur-containing amino acids by capillary electrophoresis dynamic reaction cell inductively coupled plasma mass spectrometry

Capillary electrophoresis dynamic reaction cell™ inductively coupled plasma mass spectrometry (CE-DRC-ICP-MS) for the determination of sulfur-containing amino acids is described. The sulfur-containing amino acids studied include l-cysteine, l-cystine, dl-homocystine and l-methionine. The species studied were well separated using a 70 cm length×75 μm i.d. fused silica capillary while the applied voltage was set at +22 kV and a 10 mmol l⁻¹ disodium tetraborate buffer (pH 9.8) containing 0.1 mmol l⁻¹ EDTA and 0.5 mmol l⁻¹ Triton X-100 was used as the electrophoretic buffer. The sulfur-selective electropherogram was determined at m/z 48 as by using its reaction with O₂ in the reaction cell. The method avoided the effect of polyatomic isobaric interferences at m/z 32 caused by and on by detecting as the oxide ion at m/z 48, which is less interfered. The detection limit of various species studied was in the range of 0.047-0.058 μg S ml⁻¹, which corresponded to the absolute detection limit of 1.3-1.6 pg S based on the injection volume of 27 nl. We determined the concentrations of selected sulfur-containing amino acids in urine and nutritive complement samples. The recovery was in the range of 92-128% for various species.