Catalyst free Michael addition of 3-methyl-2-pyrazolin-5-one to β-nitrostyrenes ‘on water’: a green protocol for facile synthesis of 4-(1-aryl-2-nitroethyl)-3-methyl-1H-pyrazol-5-ol

A highly efficient and green protocol has been developed for the synthesis of 4-(1-aryl-2-nitroethyl)-3-methyl-1H-pyrazol-5-ol via Michael addition of 3-methyl-2-pyrazolin-5-one with β-nitrostyrenes under catalyst free conditions on aqueous medium. A series of 4-(1-aryl-2-nitroethyl)-3-methyl-1H-pyrazol-5-ols have been synthesized with good to excellent yield. C-alkylated product was observed exclusively with 3-methyl-2-pyrazolin-5-one without formation of N-alkylated product.     

MIRC reactions of 2-bromo-5-(l-menthyloxy)furan-2(5H)-one with stabilized anions. Preparation of homochiral bicyclic γ-butyrolactones

Homochiral (5R)-4-bromo-5-(l-menthyloxy)furan-2(5H)-one with stabilized carbanions (from nitroalkanes, malononitrile and ethyl acetoacetate) afforded enantiopure bicyclic compounds in good yield (70–90%). 3-Oxabicyclic[3.1.0]hexan-2-one derivatives were obtained with nitromethane and malonic acid derivatives. However, dihydrofuro[3,4-d]isoxazol-6-one and dihydrofuro[3,4-b]furan-6(4H)-one derivatives were obtained from nitroethane and ethyl acetoacetate, respectively.     

Chemoenzymatic synthesis of both enantiomers of 3-hydroxy-2,3-dihydro-4H-chromen-4-one

4-Oxo-3,4-dihydro-2-chromen-3-yl acetate is synthesized using manganese(III)acetate starting from 2,3-dihydro-4H-chromen-4-one. K₂CO₃ mediated hydrolysis of 4-oxo-3,4-dihdro-2-chromen-3-yl acetate furnished 3-hydroxy-2,3-dihydro-4H-chromen-4-one in high yield.The enantioselective hydrolysis of (±)-4-oxo-3,4-dihydro-2-chromen-3-yl acetate in various organic solvent-phosphate buffer (pH7) systems and enantioselective transesterification of (±)-3-hydroxy-2,3-dihydro-4H-chromen-4-one in organic solvents was investigated by screening a range of lipases. The lipase Amano PS, PPL, PLE and CCL-catalyzed asymmetric ester hydrolysis and transesterification afforded the enantiomers of 3-hydroxy-2,3-dihydro-4H-chromen-4-one and 4-oxo-3,4-dihydro-2-chromen-3-yl acetate with high enantiomeric excess (up to 97% ee) and in good yields.     

Sulfur-containing heterocycles 14. New synthesis of cyclic anhydrides of 3-sulfinocarboxylic acids

3-Chlorosulfinylalkanoyl chlorides undergo cyclization into the corresponding five-membered mixed anhydrides (1,2-oxathiolan-5-one 2-oxides) under the action of sodium or mercury acetates. 2-Chlorosulfinylbenzoyl chloride gives 3H-2,1-benzoxathiol-3-one 1-oxide in high yield.     

Selective aziridination of olefinic esters

Summary Oxidation of 3-amino-2-isobutylquinazoline-4-one (2) with lead tetraacetate at –20°C gave N-acetoxyamino-2-isobutylquinazolin-4-one (3), which selectively aziridinated olefinic esters to yield substituted 1-(2-isobutylquinazolin-4-one-3-yl)-aziridine-2-carboxylates5a–q.

---

Selektive Aziridinierung von olefinischen Estern

Zusammenfassung Oxidation von 3-Amino-2-isobutylchinazolin-4-on (2) mit Bleitetraacetat bei –20°C ergab N-Acetoxyamino-2-isobutylchinazolin-4-on (3), welches mit verschiedenen olefinischen Estern selektiv substituierte 1-(2-Isobutylchinazolin-4-on-3-yl)-aziridin-2-carbonsäureester5a–q lieferte.

     

Efficient synthesis of 5-fluoroalkylated 1H-1,2,3-triazoles and application of the bromodifluoromethylated triazole to the synthesis of novel bicyclic gem-difluorinated 1H-pyrano[3,4-d][1,2,3]-triazol-4-one compounds

A series of 5-fluoroalkylated 1H-1,2,3-triazoles were synthesized in good yield by the regiospecific 1,3-dipolar cycloaddition reaction of (Z)-ethyl 3-fluoroalkyl-3-pyrrolidino-acrylates with aryl or benzyl azides. In the cases of benzyl azides, addition of Na₂CO₃ was crucial for a high yield of the triazoles. Tetrakis(dimethylamino)ethylene (TDAE) promoted reaction of bromodifluoro-methylated triazole with aldehydes affording a new class of β,β-difluoro-β-triazolyl alcohol derivatives, which were lactonized with catalytic amount of p-toluenesulfonic acid in toluene at 80-90°C to give a series of novel bicyclic gem-difluorinated 1H-pyrano[3,4-d][1,2,3]-triazol-4-one compounds in good yield.     

1,3-Dipolar cycloaddition of β-alkoxyvinyl trifluoromethylketones with aryl (or benzyl) azides: Synthesis of 4-trifluoroacetylated 1H-1,2,3-triazoles

The 1,3-dipolar cycloaddition of aryl (or benzyl) azides with 1,1,1-trifluoro-4-ethoxy-3-butene-2-one proceeded smoothly by heating without solvent. 1-Aryl (or benzyl)-4-trifluoroacetyl-1H-1,2,3-triazoles were formed regiospecifically in good yield. These compounds were readily hydrated when exposed to air. In contrast, the reaction of benzyl azide with 4-trifluoroacetyl-2,3-dihydrofuran only gave minor amounts of 4-trifluoroacetyl-5-benzylamino-2,3-dihydrofuran in addition to an inseparable mixture of other products. 5-Trifluoroacetyl-3,4-dihydro-2H-pyran was inert towards benzyl azide under the same conditions.     

3-Methoxypyrazoles from 1,1-dimethoxyethene,few original results

From the condensation between 1,1-dimethoxyethene and anhydrides, synthetically useful β,β–dimethoxy–α,β-unsaturated ketones were prepared. Upon addition of hydrazine, followed by iodination, 4-iodinated 3-methoxypyrazoles were obtained. The occurrence of a side compound also provided insights in the scope of this synthesis. In a second part, 1-(4-chlorophenyl)-3,3-dimethoxyprop-2-en-1-one was obtained from 1,1-dimethoxyethene and 4-chlorobenzoylchloride. The subsequent addition of hydrazine or phenylhydrazine led to 5-(4-chlorophenyl)-3-methoxy-1H-pyrazole or 1-phenyl-5-(4-chlorophenyl)-3-methoxypyrazole in unprecedented 64 or 54% overall yield. Unexpectedly, addition of 2-pyridylhydrazine led to the 2-([1,2,4]triazolo[4,3-a]pyridin-3-yl)-1-(4-chlorophenyl) ethanone. This led us to design original conditions, which led to the target 1-(2-pyridyl)-5-(4-chlorophenyl)-3-methoxypyrazole in a 39% overall yield. Additional examples are provided, starting from various carboxychlorides.     

Synthesis of musafluorone: a naphthoxanthenone isolated from Musa acuminata

5-Methoxy-3H-naphtho[2,1,8-mna]xanthen-3-one (musafluorone, 1), the only naphthoxanthenone reported so far from Musaceae, was synthesized starting from 2-naphthol in nine steps and resulted in an overall yield of 3%. Grignard addition of phenylmagnesium bromide to 4-methoxyperinaphthenone afforded the corresponding 4-methoxy-9-phenylphenalenone which, after epoxidation and methyl transposition, was subjected to a photochemical cyclization procedure to furnish 1.     

Synthesis of 5-(Benzylamino)-<Emphasis Type="Italic">exo</Emphasis>-3-azatricyclo-[5.2.1.0<Superscript>2,6</Superscript>]decan-4-one derivatives

5-(Benzylamino)-exo-3-azatricyclo[5.2.1.0^2,6]decan-4-one derivatives were synthesized in up to 94% yield by condensation of norbornane-fused 3-aminopyrrolidin-2-one with aromatic aldehydes.     

New cyclic zwitterionic building blocks for the synthesis of piperidine-2,4-dione and pyridine-2-one compounds

In this Letter we describe the synthesis of new chiral cyclic zwitterionic pyridin-2-one compounds 5a,b via an intramolecular ring-closure reaction of a stabilize amide sulfur ylide 4a,b derived from (R)-(−)-2-phenylglycinol and (R)-(+)-phenylethylamine in a high yield. In addition, we proved the utility of 5a,b to produce piperidine-2,4-dione 6a,b and pyridine-2-one 7a,b depending on the reaction conditions.     

Pd(0) catalyzed three-five-component C-2-arylallylation of active methylene heterocycles: pyrazolones, oxazolones, isoxazolones and N,N′-dimethylbarbituric acid

A Pd(0) catalyzed three-five-component cascade involving an aryl iodide, allene and a heterocyclic pronucleophile is used to prepare 2-arylallyl derivatives (10-12 and 16-24) from 3-phenyl-5-isoxazolone (6) and 1-phenyl-3-methylpyrazolin-5-one (7) in moderate yield. Similar cascade allylation of masked amino acids 4-methyl-2-phenyl-4H-oxazol-5-one (8a), 4-benzyl-2-phenyl-4H-oxazol-5-one (8b) and 4-isopropyl-2-phenyl-4H-oxazol-5-one (8c) gave analogous products (25-37) in good yield. N,N-Dimethylbarbiturates (38-49) are similarly prepared from N,N-dimethylbarbituric acid (9) in excellent yield.     

Metal-free synthesis of chromeno[4,3-c]pyrazol-3(2H)-one derivatives

An unprecedented metal-free synthesis of 4-(methylthio)chromeno[4,3-c]pyrazol-3(2H)-one is reported via sequential one-pot desulfitative [5+1] hetero-annulation. The present strategy consists of one-pot sequential, base catalysed dithioketene formation from active methylene of pyrazolone followed by methylation and [5+1] heteroannulative cyclization. The resulting substrate undergoes facile nucleophilic substitution with various amines to yield 4-(substituted-amine)-chromeno[4,3-c]pyrazol-3(2H)-one derivatives under metal free condition.     

Application of N,3-diaryl-3-oxo-propanethioamide in synthesis: an efficient and mild domino approach to highly substituted fused chromenones

A convenient and rapid synthesis of hitherto unknown 3-aroyl-4-aryl-2-phenylamino-4H-benzo[g]chromene-5,10-diones in high yield from β-aroyl-thioacetanilide, aromatic aldehyde, and 2-hydroxy-1,4-naphthoquinone via InCl₃ catalyzed one-pot three-component tandem Knoevenagel condensation–Michael addition–intramolecular cyclization–elimination reaction sequence is disclosed for the first time. This domino protocol has been used to obtain highly substituted pyrano[3,2-c]chromen-5(4H)-ones and 7,7-dimethyl-7,8-dihydro-4H-chromen-5(6H)-ones from N,3-diaryl-3-oxo-propanethioamide, aromatic aldehyde, and 4-hydroxycoumarine or dimedone under mild reaction conditions. A plausible reaction mechanism is proposed. The 4H-pyrano[3,2-c]chromen-5-one and 7,7-dimethyl-7,8-dihydro-4H-chromen-5(6H)-one derivatives possessing 3-(2-chlorobenzoyl)-2-phenylamino-substituents further cyclized under basic conditions to yield penta-cyclic 7,13-diaryl-5,14-dioxa-13-aza-benzo[a]naphthacen-6,8(7H,13H)-dione and tetra-cyclic 6,12-diaryl-3,3-dimethyl-3,4-dihydro-2H-chromeno[2,3-b]quinolin-1,11(6H,12H)-dione, respectively.     

Synthesis of 5-methylfuro[3,2-c]quinolin-4(5H)-one via palladium-catalysed cyclisation of N-(2-iodophenyl)-N-methyl-3-furamide

A new synthesis of the furo[3,2-c]quinolin-4(5H)-one heterocycle has been developed using a palladium-catalysed cyclisation of N-(2-iodophenyl)-N-methyl-3-furamide. By varying the catalyst, base and solvent, the yield of the cyclisation was optimised. It was found that the use of palladium oxide with potassium acetate in N,N-dimethylacetamide (DMA) with a small amount of tetrabutylammonium chloride gave the highest yield of 5-methylfuro[3,2-c]quinolin-4(5H)-one (9).     

Synthetic approaches to imino sugar (2R,3R,4S)-2-(hydroxymethyl)-4-methylpyrrolidine-3,4-diol from naturally occurring sugar and amino acid

Imino sugar compound 3 was prepared by two alternative routes starting from ribose and d-serine. From d-serine (3R,4R,5R)-3,4-dihydroxy-5-(hydroxymethyl)-3-methylpyrrolidin-2-one was prepared in five steps in 50% overall yield, which was further converted into (2R,3R,4S)-2-(hydroxymethyl)-4-methylpyrrolidine-3,4-diol in three steps in 23% overall yield.     

Reaction of 2-(alkenylsulfanyl)pyrimidin-4(3<Emphasis Type="Italic">H</Emphasis>)-ones with hydrochloric acid

Hydrochloric acid reacts with 5-ethyl-2-methallylsulfanyl-6-methylpyrimidin-4(3H)-ones to protonate the nitrogen atom; it adds to the double bond of 2-prenylsulfanyl-6-(trifluoromethyl)pyrimidin-4(3H)-one and gives the addition and heterocyclization products in the case of 2-prenylsulfanyl-6-methylpyrimidin-4(3H)-one.     

Preparation of 3,4-fused-spiro[furan-5(5H),4′-piperidin]-2-one

A general method for the preparation of various 3,4-fused-spiro[furan-5(5H),4′-piperidin]-2-one with high yield is reported. The formation of spiro[furanone-piperidine] structure was achieved by a Suzuki coupling, followed by an iodolactonization reaction.     

Reaction of N-methyl-5-tributylstannyl-4-fluoro-1H-pyrazole and its application to N-methyl-chromeno[2,3-d]pyrazol-9-one synthesis

N-Methylation by sequential treatment of 5-tributylstannyl-4-fluoro-1H-pyrazole 1 with LDA and iodomethane regioselectively afforded the compound 2a in high yield. The addition reaction of 5-lithiated-4-fluoro-1H-pyrazole generated from 2a with a wide range of electrophiles allowed a facile introduction of different substituents at position 5 in good yields. The adduct 3d was efficiently converted to N-methyl-chromeno[2,3-d]pyrazol-9-one 9 in 3 steps.     

Synthesis, structure and complexation of the fluorinated 1,3-enaminoketones containing at the nitrogen atom substituents with a terminal C≡C bond

The reaction of fluorinated lithium 1,3-diketonates with propargylamine hydrochloride and 1,1,1-trifluorpentane-2,4-dione or 1,1,1-trifluoro-4-methoxypent-3-en-2-one with propargylamine and 3-aminophenylacetylene were performed to obtain fluorinated 1,3-enaminones containing at a nitrogen atom substituents with terminal C≡C bonds: (Z)-1,1,1-trifluoro-4-(2-propynylamino)-3-pentene-2-one, (Z)-1,1,2,2-tetrafluoro-5-(2-propynylamino)-4-hexen-3-one, and 4-(3-ethynylphenylamino)-1,1,1-trifluoropentyl-3-en-2-one. Reactions of 4-(3-ethynyl-phenylamino)-1,1,1-trifluoro-pentyl-3-en-2-one with Cu(II) acetate or nanosized powder of copper or its oxides led to the respective chelate complex. The structure of (Z)-1,1,2,2-tetrafluoro-5-(2-propynylamino)-4-hexen-3-one and a copper complex of 4-(3-etinilphenylamino)-1,1,1-trifluoropenta-3-en-2-one was determined by XRD.