Preparation of aryl azides of aryl boronic acids and one-pot synthesis of 1,4-diaryl-1,2,3-triazoles by a magnetic cysteine functionalized GO–CuI/II nanocomposite

A mixed Cu^I/Cu^IIcatalyst based on magnetic cysteine functionalized graphene oxide (Cu^I/II@Cys-MGO) was prepared and used for the azidonation reaction of aryl boronic acids and one-pot synthesis of 1,4-diaryl −1,2,3-triazoles. Aryl azides were obtained in good yields and short reaction times via cross-coupling of aryl boronic acids with sodium azide in the presence of Cu^II catalytic species in this catalytic system. The azide-alkyne cycloaddition reaction was catalyzed by CuI catalytic species in Cu^I/^II@Cys-MGO nanocomposite.     

1,3‐O‐Transposition or Trisubstituted Z‐Enol Ester? A Comparative Study of Reactions of Ynones

Ynones are useful substrates for transition‐metal‐mediated synthesis. The Au^I‐catalyzed 1,3‐O‐transposition is an important reaction of ynones. Recently, an efficient Cu^I‐catalyzed synthesis of trisubstituted Z‐enol esters via interrupting the traditional 1,3‐O‐transposition reaction of ynones was reported by Zhu's group. Herein, density functional theory studies disclosed that the hydrogen bond formed by carboxylic acid plays an important role for the reactivity and selectivity in this novel reaction. A qualitative rule was also found to explain the substituent effect in the ynone substrate, and this is consistent with experiments. The Au^I‐catalyst and Cu^I‐catalyst were further compared to interpret the essential cause of why the Au^I‐catalyst prefers the 1,3‐O‐transpostion reaction. These conclusions might be helpful for the rational design of reactions of ynones.     

CuCl2和HY分子筛的表面反应及Cu/Y分子筛的制备及其催化甲醇氧化羰基化

以CuCl₂为前驱物与HY分子筛进行固相离子交换制备了Cu/Y催化剂,采用热重方法研究了CuCl₂与HY分子筛的表面固相离子交换反应,结合活性测试表明催化剂中高度分散的CuCl和离子交换形式的Cu⁺物种是甲醇氧化羰基化合成碳酸二甲酯的催化活性中心。X射线光电子能谱表征和元素分析结果表明,活性金属Cu主要以CuCl形式存在于分子筛外表面,而在分子筛笼内则以交换的Cu⁺和少量吸附的CuCl形式存在。与以CuCl为交换铜源所制催化剂相比,以CuCl₂为铜源制备的催化剂Cu含量低,催化活性更高。     

Coordination-bond-directed synthesis of hydrogen-bonded organic frameworks from metal–organic frameworks as templates

Controlled synthesis of hydrogen-bonded organic frameworks (HOFs) remains challenging, because the self-assembly of ligands is not only directed by weak hydrogen bonds, but also affected by other competing van der Waals forces. Herein, we demonstrate the coordination-bond-directed synthesis of HOFs using a preformed metal–organic framework (MOF) as the template. A MOF (Cu^I-TTFTB) based on two-coordinated Cu^I centers and tetrathiafulvalene-tetrabenzoate (TTFTB) ligands was initially synthesized. Cu^I-TTFTB was subsequently oxidized to the intermediate (Cu^II-TTFTB) and hydrated to the HOF product (TTFTB-HOF). Single-crystal-to-single-crystal (SC-SC) transformation was realized throughout the MOF-to-HOF transformation so that the evolution of structures was directly observed by single-crystal X-ray diffraction. The oxidation and hydration of the Cu^I center are critical to breaking the Cu–carboxylate bonds, while the synergic corbelled S⋯S and π⋯π interactions in the framework ensured stability of materials during post-synthetic modification. This work not only provided a strategy to guide the design and discovery of new HOFs, but also linked the research of MOFs and HOFs.

The MOF-to-HOF transformation was realized in a single-crystal-to-single-crystal manner by the oxidation and hydration of the Cu^I center in Cu^I-TTFTB. The corbelled S⋯S and π⋯π interactions ensured the framework stability during transformation.     

Synthesis of heteropolynuclear Cu<Superscript>I</Superscript> and Pd<Superscript>II</Superscript> complexes with polymeric 2,2′-biquinoline-containing ligands and investigation of their catalytic activity in the Sonogashira couplings

A method for electrosynthesis of heteropolynuclear biquinoline-containing Cu^I and Pd^II complexes using sacrificial Cu and Pd anodes was developed. The sequence of anode dissolution (first Pd and then Cu) was important for the synthesis of the complex. The opposite sequence of dissolution resulted in oxidation of the initially formed Cu^I ions to Cu^II. The obtained Cu^I and Pd^II complexes with polymer ligands had high catalytic activity in the reaction of aryl halides with phenylacetylene giving rise to a C(sp²)-C(sp) bond. The yield of arylphenylacetylene in the presence of 0.1 mol.% of Pd catalyst in relation to the starting halide was 50–90% depending on the nature of the aryl halide.     

Chemical Origin of the Stability Difference between Copper(I)‐ and Silver(I)‐Based Halide Double Perovskites

Recently, Cu^I‐ and Ag^I‐based halide double perovskites have been proposed as promising candidates for overcoming the toxicity and instability issues inherent within the emerging Pb‐based halide perovskite absorbers. However, up to date, only Ag^I‐based halide double perovskites have been experimentally synthesized; there are no reports on successful synthesis of Cu^I‐based analogues. Here we show that, owing to the much higher energy level for the Cu 3d¹⁰ orbitals than for the Ag 4d¹⁰ orbitals, Cu^I atoms energetically favor 4‐fold coordination, forming [CuX₄] tetrahedra (X=halogen), but not 6‐fold coordination as required for [CuX₆] octahedra. In contrast, Ag^I atoms can have both 6‐ and 4‐fold coordinations. Our density functional theory calculations reveal that the synthesis of Cu^I halide double perovskites may instead lead to non‐perovskites containing [CuX₄] tetrahedra, as confirmed by our material synthesis efforts.     

Template Synthesis,Metalation, and Self‐Assembly of Protic Gold(I)/(NHC)2 Tectons Driven by Metallophilic Interactions

A new protocol for the synthesis of protic bis(N‐heterocyclic carbene) complexes of Au^I by a stepwise metal‐controlled coupling of isocyanide and propargylamine is described. They are used as tectons for the construction of supramolecular architectures through metalation and self‐assembly. Notably a unique polymeric chain of Cu^I with alternate Au^I/bis(imidazolate) bridging scaffolds and strong unsupported Cu^I–Cu^I interactions has been generated, as well as a 28‐metal‐atoms cluster containing a nanopiece of Cu₂O trapped by peripheral Au^I/bis(imidazolate) moieties.     

Template Synthesis,Metalation, and Self‐Assembly of Protic Gold(I)/(NHC)2 Tectons Driven by Metallophilic Interactions

A new protocol for the synthesis of protic bis(N‐heterocyclic carbene) complexes of Au^I by a stepwise metal‐controlled coupling of isocyanide and propargylamine is described. They are used as tectons for the construction of supramolecular architectures through metalation and self‐assembly. Notably a unique polymeric chain of Cu^I with alternate Au^I/bis(imidazolate) bridging scaffolds and strong unsupported Cu^I–Cu^I interactions has been generated, as well as a 28‐metal‐atoms cluster containing a nanopiece of Cu₂O trapped by peripheral Au^I/bis(imidazolate) moieties.     

‘Click chemistry’ in Cu-zeolites: a convenient access to glycoconjugates

Zeolites modified with Cu^I ions are efficient catalyst for ‘click’ reactions involving carbohydrates and aminoacid derivatives. Glycopeptides and oligosaccharides mimics as well as multivalent carbohydrate derivatives have been obtained in good to high yield using heterogeneous Cu^I-modified zeolite catalysts. Contrarily to expectation, pore sizes and internal shapes within zeolites were not a limitation and large glucosyl ditriazoles, disaccharide triazoles, and glucosylated triazolylaminoacids could easily be obtained. Such Cu^I-zeolite heterogeneous catalysts greatly facilitated products recovery, through an easy filtration-solvent evaporation sequence, thus offering a convenient alternative to current methods.     

Total synthesis of the anti-inflammatory lipid mediator Resolvin E2

The total synthesis of Resolvin E2, an endogenous lipid mediator of the resolution of inflammation derived from eicosapentaenoic acid, has been achieved. The chiral hydroxy-groups at C5 and C18 were generated in a simple, efficient, and environmentally friendly manner via an asymmetric Noyori transfer hydrogenation in water using sodium formate as a reducing agent. Pd⁰/Cu^I Sonogashira couplings of the three key fragments and Zn(Cu/Ag) reduction completed the synthesis of Resolvin E2.     

Electro-Mechanochemical Atom Transfer Radical Cyclizations using Piezoelectric BaTiO3

The formation and regeneration of active Cu^I species is a fundamental mechanistic step in copper-catalyzed atom transfer radical cyclizations (ATRC). Typically, the presence of the catalytically active Cu^I species in the reaction mixture is secured by using high Cu^I catalyst loadings or the addition of complementary reducing agents. In this study it is demonstrated how the piezoelectric properties of barium titanate (BaTiO₃) can be harnessed by mechanical ball milling to induce electrical polarization in the strained piezomaterial. This strategy enables the conversion of mechanical energy into electrical energy, leading to the reduction of a Cu^II precatalyst into the active Cu^I species in copper-catalyzed mechanochemical solvent-free ATRC reactions.     

Electro‐Mechanochemical Atom Transfer Radical Cyclizations using Piezoelectric BaTiO3

The formation and regeneration of active Cu^I species is a fundamental mechanistic step in copper‐catalyzed atom transfer radical cyclizations (ATRC). Typically, the presence of the catalytically active Cu^I species in the reaction mixture is secured by using high Cu^I catalyst loadings or the addition of complementary reducing agents. In this study it is demonstrated how the piezoelectric properties of barium titanate (BaTiO₃) can be harnessed by mechanical ball milling to induce electrical polarization in the strained piezomaterial. This strategy enables the conversion of mechanical energy into electrical energy, leading to the reduction of a Cu^II precatalyst into the active Cu^I species in copper‐catalyzed mechanochemical solvent‐free ATRC reactions.     

Copper‐Mediated Controlled/“Living” Radical Polymerization in Polar Solvents: Insights into Some Relevant Mechanistic Aspects

The field of transition‐metal‐mediated controlled/“living” radical polymerization (CLRP) has become the subject of intense discussion regarding the mechanism of this widely‐used and versatile process. Most mechanistic analyses (atom transfer radical polymerization (ATRP) vs. single‐electron transfer living radical polymerization (SET‐LRP)) have been based on model experiments, which cannot correctly mimic the true reaction conditions. We present, for the first time, a determination of the [Cu^IBr]/[L] (L=nitrogen‐based chelating ligand) ratio and the extent of Cu^IBr/L disproportionation during CLRP of methyl acrylate (MA) in dimethylsulfoxide (DMSO) with Cu⁰ wire as a transition‐metal catalyst source. The results suggest that Cu⁰ acts as a supplemental activator and reducing agent of Cu^IIBr₂/L to Cu^IBr/L. More importantly, the Cu^IBr/L species seem to be responsible for the activation of SET‐LRP.     

Sterically Demanding AgI and CuI N-Heterocyclic Carbene Complexes: Synthesis,Structures, Steric Parameters,and Catalytic Activity

The synthesis and full characterization of new air-stable Ag^I and Cu^I complexes bearing structurally bulky expanded-ring N-heterocyclic carbene (erNHC) ligands is presented. The condensation of protonated NHC salts with Ag₂O afforded a collection of Ag^I complexes, and their first use as ligand transfer reagents led to novel isostructural Cu^I or Au^I complexes. In situ deprotonation of the NHC salts in the presence of a copper(I) source, provides a library of new Cu^I complexes. The solid-state structures feature large N-C_NHC-N angles (118–128°) and almost identical angles between the aryl groups on the nitrogen atoms and the plane of the N-C-N unit of the carbene (i.e. torsion angles close to 0°). Among the steric parameters, the percent buried volume (%V_bur) values span easily in the 50–57 % range, and that one of (9-Dipp)CuBr complex (%V_bur=57.5) overcomes to other known erNHC–metal complexes reported to date. Preliminary catalytic experiments in the copper-catalyzed coupling between N-tosylhydrazone and phenylacetylene, afforded 76–93 % product at the 0.5–2.5 mol % catalyst loading, proving the stability of Cu^I erNHC complexes at elevated temperatures (100 °C).     

Electrochemical synthesis of phosphorus esters from white phosphorus in the presence of copper complexes and ethanol

In the presence of white phosphorus the redox potentials of the copper ions change and the potential of the reduction wave of Cu^I/Cu⁰ shifts noticeably toward more positive values. The Cu^I—P₄ complex is characterized by a lower value of the electrochemical gap, that is, higher polarizability and reactivity compared to those of the free Cu^I cation. Phosphorus esters can be synthesized from P₄ and ethanol. The latter is in the composition of the copper(ii) complexes, which act as a catalyst-charge mediator.     

The Development of Copper‐Catalyzed Aerobic Oxidative Coupling of H‐Tetrazoles with Boronic Acids and an Insight into the Reaction Mechanism

The development of a highly efficient and practical protocol for the direct C?N coupling of H‐tetrazole and boronic acid was presented. A careful and patient optimization of a variety of reaction parameters revealed that this conventionally challenge reaction could indeed proceed efficiently in a very simple system, that is, just by stirring the tetrazoles and boronic acids under oxygen in the presence of different Cu^I or Cu^II salts with only 5 mol % loading in DMSO at 100 °C. Most significantly, the reaction could proceed very smoothly in a regiospecific manner to afford the 2,5‐disubstituted tetrazoles in high to excellent yields. A mechanistic study revealed that both tetrazole and DMSO are crucial for the generation of catalytically active copper species in the reaction process in addition to their role as reactant and solvent, respectively. It is demonstrated that in the reaction cycle, the Cu^I catalyst could be oxidized to Cu^II by oxygen to form a [CuT₂D] complex (T=tetrazole anion; D=DMSO) through an oxidative copper amination reaction. The Cu^II complex thus formed was confirmed to be the real catalytically active copper species. Namely, the Cu^II complex disproportionates to aryl Cu^III and Cu^I in the presence of boronic acid. Facile elimination of the Cu^III species delivers the C?N‐coupled product. The results presented herein not only provide a reliable and efficient protocol for the synthesis of 2,5‐disubstituted tetrazoles, but most importantly, the mechanistic results would have broad implications for the de novo design and development of new methods for Cu‐catalyzed coupling reactions.     

CuH‐Catalysed Hydroamination of Styrene with Hydroxylamine Esters: A Coupled Cluster Scrutiny of Mechanistic Pathways

A detailed computational exploration of mechanistic intricacies of the copper(I) hydride (CuH)‐catalysed hydroamination of styrene with a prototype hydroxylamine ester by a recently reported [(dppbz)CuH] catalyst (dppbz≡{P^P}≡1,2‐bis(diphenylphosphino)‐benzene) is presented. A variety of plausible mechanistic avenues have been pursued by means of a sophisticated computational methodology, from which a general understanding of the factors controlling hydroamination catalysis emerged. The catalytically competent {P^P}Cu^I hydride, which is predominantly present as its dimer, involves in irreversible hydrocupration proceeding with complete 2,1 regioselectivity to form a secondary {P^P}Cu^I benzyl intermediate. Its interception with benzylamine ester produces the branched tertiary amine product and {P^P}Cu^I benzoate upon intramolecular S_N2 disruption of the amine electrophile′s N?O linkage, to precede a highly rapid, strongly exergonic C?N bond‐forming reductive elimination. The {P^P}Cu^I benzoate corresponds to the catalyst resting state and its conversion back into the {P^P}Cu^I hydride upon transmetalation with a hydrosilane is turnover limiting. The effect of electronic perturbations at the amine electrophile upon the reaction rate for productive hydroamination catalysis and also non‐productive reduction of the hydroxylamine ester has been gauged, which unveiled a more fundamental insight into catalytic structure‐performance relationships.     

Sulfoethylated polyethylenimine: synthesis in gel and sorption properties

Using the gel synthesis approach of polymer-analogous transformations, N-sulfoethylation of polyethylenimine was carried out by treating the polymer with sodium vinyl sulfonate. The compositions and structures of the products were characterized by elemental analysis, FT-IR spectroscopy, and ¹H NMR spectroscopy. At pH 3.0–4.5 sulfoethylated polyethylenimine can selectively extract Ag^I and Cu^II from an ammonia—acetate buffer solution in the presence of a series of transition and alkaline-earth metals. At pH > 6.5 the sorbent can be used for the group extraction of a number of transition metal ions. The structural feature of the obtained derivative eliminates the selectivity of sorption of Ag^I ions compared to Cu^II ions, which has previously been revealed for the sulfoethylated derivatives of chitosan and polyaminostyrene.

     

A Stimuli‐Responsive Rotaxane–Gold Catalyst: Regulation of Activity and Diastereoselectivity

A rotaxane‐based Au catalyst was developed and the effect of the mechanical bond on its behavior was studied. Unlike the non‐interlocked thread, the rotaxane requires a catalytically innocent cofactor, the identity of which significantly influences both the yield and diastereoselectivity of the reaction. Under optimized conditions, Au^I (the catalyst), Ag^I (to abstract the Cl^? ligand), and Cu^I (the cofactor) combine to produce a catalyst with excellent activity and selectivity.     

Carbon‐Supported Copper Nanomaterials: Recyclable Catalysts for Huisgen [3+2] Cycloaddition Reactions

Highly disperse copper nanoparticles immobilized on carbon nanomaterials (CNMs; graphene/carbon nanotubes) were prepared and used as a recyclable and reusable catalyst to achieve Cu^I‐catalyzed [3+2] cycloaddition click chemistry. Carbon nanomaterials with immobilized N‐heterocyclic carbene (NHC)‐Cu complexes prepared from an imidazolium‐based carbene and Cu^I show excellent stability including high efficiency at low catalyst loading. The catalytic performance evaluated in solution and in bulk shows that both types of Cu‐CNMs can function as an effective recyclable catalysts (more than 10 cycles) for click reactions without decomposition and the use of external additives.