Effect of Fe doping on the room temperature ferromagnetism in chemically synthesized (In1−xFex)2O3 (0 ⩽ x ⩽ 0.07) magnetic semiconductors

Observation of room temperature ferromagnetism in Fe doped In₂O₃ samples (In_1−xFe_x)₂O₃ (0 ⩽ x ⩽ 0.07) prepared by co-precipitation technique is reported. Lattice parameter obtained from powder X software shows distinct shrinkage of the lattice constant indicating an actual incorporation of Fe ions into the In₂O₃ lattice. X-ray diffraction data measurements show that the entire sample exhibits single phase polycrystalline behavior. SEM micrographs showed the prepared powder was in the range 25–36 nm. SEM EDS mapping showed the presence of Fe and In ions in the Fe doped In₂O₃ sample. The highest remanence magnetization moment (6.624 × 10⁻⁴ emu/g) is reached in the sample with x = 0.03.     

Determination of the critical indium composition corresponding to the metal–insulator transition in InxGa1−xN (0.06 ⩽ x ⩽ 0.135) layers

The low-temperature conductivity of In_xGa_1−xN alloys (0.06 ⩽ x ⩽ 0.135) is analyzed as a function of indium composition (x). Although our In_xGa_1−xN alloys were on the metallic side of the metal–insulator transition, neither the Kubo-Greenwood nor Born approach were able to describe the transport properties of the In_xGa_1−xN alloys. In addition, all of the In_xGa_1−xN alloys took place below the Ioeffe–Regel regime with their low conductivities. The observed behavior is discussed in the framework of the scaling theory. With decreasing indium composition, a decrease in thermal activation energy is observed. For the metal–insulator transition, the critical indium composition is obtained as x_c = 0.0543 for In_xGa_1−xN alloys.     

Modification of B-site doping of perovskite LaxSr1 − xFe1 − y−zCoyCrzO3 − δ oxide by Mg2+ ion

Co-doping B-site of perovskite oxide La_xSr_1 ? xCo_yFe_1 ? yO_3 ? δ (LSCFO) with Cr⁶⁺ and Mg²⁺ ions has been attempted in this research for revamping chemical stability and oxygen ionic conductivity of this mixed conducting oxide. It is known that partial substitution for B-site cations of LSCFO by Cr gives rise to a significant improvement on chemical and thermal stability of the perovskite oxide. On the basis of this doped structure, introduction of an immaterial dose of Mg²⁺ ion into its B-site results in a microstructure consisting of smaller grains with higher density than its precursor. Furthermore, the resulting perovskite oxide La_0.19Sr_0.8Fe_0.69Co_0.1Cr_0.2 Mg_0.01O_3 ? δ (LSFCCMO) displays higher O^2? conductivity than the solely Cr-doped LSCFO besides the improved chemical stability against reduction in 5% CH₄/He stream at 850 °C. A detailed examination of the oxidation states of B-site transition metal ions by XPS has also been conducted as a part of structural characterizations of LSFCCMO. The assessment of relative O^2? conductivity shows that the grain boundary area plays a more important role than the bulk phase in facilitating ion transport, but with comparable boundary areas the higher densification level is favorable.     

1.55 μm silicon-based reflection-type waveguide-integrated thermo-optic 2 × 2 switch

In this work a waveguide-integrated 2 × 2 switch operating at the infrared communication wavelength of 1550 nm is proposed and theoretically discussed. The device is based on the total internal reflection (TIR) phenomenon and the thermo-optic effect (TOE) in hydrogenated amorphous silicon (a-Si:H) and crystalline silicon (c-Si). It takes advantage of a bandgap-engineered a-Si:H layer to explore the properties of an optical interface between materials showing similar refractive indexes but different thermo-optic coefficients. In particular, thanks to modern plasma-enhanced chemical vapour deposition (PECVD) techniques, the refractive index of the amorphous film can be properly tailored to match that of c-Si at a given temperature. TIR may be therefore achieved at the interface by acting on the temperature. The device is integrated in a 4 μm-wide and 3 μm-thick single-mode rib waveguide. The substrate is a silicon-on-insulator (SOI) wafer with an oxide thickness of 500 nm. We calculated an output crosstalk always better than 24 dB and insertion losses as low as 3.5 dB.     

Specific heat and correlation between resistivity and thermoelectric power of GdBa2(Cu1−xMnx)3O7−δ HTSC system for x ⩽ 0.02

In this communication we present some theoretical results of specific heat and thermoelectric power of the superconductor GdBa₂(Cu_1?xMn_x)₃O_7?δ (for x ? 0.02). A model based on separate electronic and phononic contributions is used for the interpretation of the specific heat data while a narrow band model is used for the analysis of thermoelectric power. On the basis of these models two main conclusions have been drawn about the relative effects of different Mn contents: (1) the observed fluctuation effects near T_c whose strength increases with increasing Mn content and (2) Mn produces mainly electronic effects for lower Mn contents, while for higher doping levels (x > 0.0075) Mn predominantly causes carrier-Mn scattering process.     

Intercomparison of Fluctuation Induced Conductivity of Cu0.5Tl0.5Ba2Can−1CunO2n+4−y (n = 2, 3, 4) superconductor thin films

An intercomparison of Fluctuation Induced Conductivity (FIC) of Cu_0.5Tl_0.5Ba₂Ca_n?1Cu_nO_2n+4?y (n = 2, 3, 4) [CuTl-12(n ? 1)n] superconductor thin films is given. We tried to find any correlation between the critical temperature and the parameters extracted from the excess conductivity data i.e. cross-over temperature, pseudogap temperature and fluctuation amplitudes. We found that the critical temperature seems to depend on the fluctuation amplitude; greater the fluctuation amplitude higher is the critical temperature.     

Raman scattering study of IrxRu1−xO2 mixed metal oxide nanowires (0 ≤ x ≤ 1)

Recent interests in mixed metal oxide nanostructured materials especially Ir_xRu_1−xO₂ compounds have been mainly driven by the technological application as electrocatalyst and electrode materials. We present room temperature Raman scattering results of single crystalline Ir_xRu_1−xO₂ (0 ≤ x ≤ 1) nanowires grown by atmospheric pressure chemical vapor deposition. We observed that the E_g, the A_1g, and the B_2g phonon modes of a single Ir_xRu_1−xO₂ nanowire are blue-shifted linearly with respect to the Ir contents from which we could get stoichiometry information. We also observed that the asymmetric lineshape and the broadening of the full width at half maximum of the E_g mode that involves the out-of-plane oxygen vibration. The unusual asymmetric broadening of the E_g phonon can be explained by the activation of the non-zone-center phonons due to substitutional disorder present in the system. We also found that there is a mixed mode of the A_1g and the B_2g phonons due to the substitutional disorder, in the range of 630–750 cm⁻¹.     

Atomic and nanostructures of monolayer c(2 × 2)NiN on Cu(0 0 1)

Structures of monolayer nickel nitride (NiN) on Cu(0 0 1) surface are studied by X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). Formations of Ni–N chemical bonds and NiN monolayer at the surface are confirmed by XPS on the N-adsorbed Cu(0 0 1) surfaces after Ni deposition and subsequent annealing to 670 K. A c(2 × 2) structure is always observed in the LEED patterns, which is a quite contrast to the (2 × 2)p4g structure observed usually at the N-adsorbed Ni(0 0 1) surface. Atomic images by STM indicate the mixture of Ni–N and Cu–N structures at the surface. Density of the trenches on the N-saturated surface decreases and the grid pattern on partially N-covered surfaces becomes disordered with increasing the Ni coverage. These results are attributed to the decrease of the surface compressive stress at the N-adsorbed Cu surface by mixing Ni atoms.     

Effective line strengths of trans-nitrous acid near 1275 cm−1 and cis-nitrous acid at 1660 cm−1

We determined the effective line strengths of the trans conformer of nitrous acid (HONO) near 1275 cm^?1 (R-branch of ν₃ mode, NOH bend) and of the cis conformer at 1660 cm^?1 (R-branch of ν₂ mode, NO stretch), both at a spectral resolution of 0.001 cm^?1 by tunable infrared laser differential absorption spectroscopy (TILDAS) utilizing continuous-wave quantum cascade (cw-QC) lasers. Absorbance of one conformer was measured while simultaneously quantifying the mixing ratio of total HONO by catalytic conversion to nitric oxide (NO) followed by calibrated absorption spectroscopy. Line strengths obtained here are consistent with previously reported band strengths for the trans conformer but are lower by a factor of approximately 2.4 for the cis conformer.     

Study of interaction through dielectrics: Behavior of − OH group molecules from 10 MHz to 20 GHz

The complex permittivity spectra for tert-butyl alcohol (TB) with 2-propanol (2P) were determined over the frequency range of 10 MHz to 20 GHz using the time domain reflectometry (TDR) in the temperature range 25 °C to 55 °C for 11 different concentrations of the system. The static dielectric constant (ε₀) and relaxation time (τ) have been determined these spectra using the Debye model. Excess properties and Kirkwood correlation factor of the mixtures have been determined. The excess permittivity is found to be positive in the tert-butyl alcohol rich region and negative in the 2-propanol rich region. However, the excess inverse relaxation time has different trend. The static dielectric constants for the mixtures have also been fitted with the modified Bruggeman model by assuming an additional parameter in the model. It appears that structure of the TB–2P dimer in the TB rich region favors parallel dipole orientation, whereas in the 2P rich region, it favors antiparallel orientation.     

Synthesis and Gas-Sensing Properties of MnO2 – x and MnO2 – x/CuO-Coated Multiwalled Carbon Nanotube Nanocomposites

Physics of the Solid State - Nanocomposites based on multiwall carbon nanotubes (MWCNTs) impregnated with manganese oxide MnO2 – x and copper oxide CuO are synthesized and...     

Morphology of Cn thin films (50 ⩽ n < 60) on graphite: Inference of energy dissipation during hyperthermal deposition

Low energy cluster beam deposition, LECBD, under UHV conditions has been used to generate thin films comprising monodispersed non-IPR fullerenes, C_n, 50 ? n < 60, on pyrolithic graphite surfaces (HOPG). The morphology of the resulting C_n deposits has subsequently been studied by ex situ atomic force microscopy. Deposition experiments were carried out under nominally normal incidence and at hyperthermal incident kinetic energies, E₀, varied between 1 and 40 eV. Surface temperatures during deposition, T_s, were varied from 300 K to the desorption onset of ～700 K. Initial sticking of C_n cages is governed by the lateral density of step edges, which act as pinning and nucleation centres for migrating cages. Consequently in the early deposition stages, the surface exhibits large areas of empty terraces, while the step edges themselves are well-decorated. The terraces in turn become decorated by dendritic C_n islands in later deposition stages. Both, the mean size of these 2D islands and the mean distance between nearest islands, δ, scale with the size of the terraces. When increasing the primary kinetic energy, the fractal-like islands become smaller and less dendritic in shape. The mean initial sticking coefficient decays exponentially with increasing E₀. The island topography has also been found to depend sensitively on the deposition temperature. Instead of the dendritic/fractal islands generated at room temperature, densely packed islands terminated by smooth rims are observed upon deposition at elevated temperatures. We rationalize our findings in terms of a three step deposition process involving: (i) conversion of perpendicular E₀ into hyperthermal surface parallel gliding/sliding motion, (ii) friction–dissipation of this surface-parallel kinetic energy within an (unexpectedly large) mean free path Λ followed by (iii) thermal diffusion. Λ, is observed to scale with E₀ and T_s.     

CRDS of water vapor at 0.1 Torr between 6886 and 7406 cm−1

The absorption spectrum of water vapor in “natural” isotopic abundance has been recorded by high sensitivity CW-Cavity Ring Down Spectroscopy (CW-CRDS) between 6885.79 and 7405.91 cm^?1. This strong absorbing region includes the first hexad of interacting vibrational bands which was previously studied by Fourier Transform Spectroscopy. The achieved sensitivity of the recordings varies from α_min～2×10^–11 to 2×10^?10 cm^?1 allowing us to use a sample pressure of 0.1 Torr, making pressure broadening of the line profile mostly negligible. Weak lines in the vicinity of much stronger lines could then be accurately measured. The weakest lines have intensity on the order of 5×10^–28 cm/molecule at 296 K. A set of 4471 lines were assigned to 4916 transitions of five water isotopologues (H₂ ¹⁶O, H₂ ¹⁸O, H₂ ¹⁷O, HD¹⁶O and HD¹⁸O). A small number of new energy levels was determined mostly for the H₂ ¹⁷O isotopologue. The previous investigations and existing databases are critically evaluated. In particular, a number of corrections and new assignments are proposed for the water list provided by the HITRAN database in the considered region. As a result, a complete list of 12,700 transitions for water in “natural” isotopic abundance is provided as Supplementary Material for the 6885–7408 cm^?1 region.     

Oxygen nonstoichiometry and defect equilibrium in La2 − xSrxNiO4 + δ

Nonstoichiometric variation of oxygen content in La_2 ? xSr_xNiO_4 + δ (x = 0, 0.1, 0.2, 0.3, 0.4) and decomposition P(O₂) were determined by means of high temperature gravimetry and coulometric titration. The measurements were carried out in the temperature range between 873 and 1173 K and the P(O₂) range between 10^? 20 and 1 bar. La_2 ? xSr_xNiO_4 + δ showed the oxygen excess and the oxygen deficient compositions depending on P(O₂), temperature, and the Sr content. The value of partial molar enthalpy of oxygen approaches zero as δ increases in the oxygen excess region, which indicate that the interstitial oxygen formation reaction is suppressed as δ increase. The relationship between δ and logP(O₂) were analyzed by two types of defect equilibrium models. One is a localized electron model, and the other is a delocalized electron model. Both models can well explain the oxygen nonstoichiometry of La_2 ? xSr_xNiO_4 + δ with a regular solution approximation.     

Strained c(4 × 2) CoO(1 0 0)-like monolayer on Pd(1 0 0): Experiment and theory

We report on an interface-stabilized strained c(4 × 2) phase formed by cobalt oxide on Pd(1 0 0). The structural details and electronic properties of this oxide monolayer are elucidated by combination of scanning tunneling microscopy data, high resolution electron energy loss spectroscopy measurements and density functional theory. The c(4 × 2) periodicity is shown to arise from a rhombic array of Co vacancies, which form in a pseudomorphic CoO(1 0 0) monolayer to partially compensate for the compressive strain associated with the large lattice mismatch (～9.5%) between cobalt monoxide and the substrate. Deviation from the perfect 1:1 stoichiometry thus appears to offer a common and stable mechanism for strain release in Pd(1 0 0) supported monolayers of transition metal rocksalt monoxides of the first transition series, as very similar metal-deficient c(4 × 2) structures have been previously found for nickel and manganese oxides on the same substrate.     

Coverage dependence of glycine adsorption on the Ge(100) − 2 × 1 surface

A combination of infrared spectroscopy, X-ray photoelectron spectroscopy and density functional theory has been used to investigate the adsorption behavior of glycine at the Ge(100) ? 2 × 1 surface under ultrahigh vacuum conditions. Comparison of experimental and simulated IR spectra indicates that at 310 K, glycine adsorbs on Ge(100) ? 2 × 1 via O–H dissociation, with some fraction of the products also forming an N dative bond to a neighboring germanium atom. O–Ge dative bonding is not observed. As coverage increases, the surface concentration of the monodentate O–H dissociated adduct increases, while that of the N dative-bonded species appears constant. XPS data support and clarify the IR findings and reveal new insights, including the presence at higher coverage of a minor product that has undergone dual O–H and N–H dissociation. These findings are supported by the calculated energy diagrams, which indicate that the reaction of a glycine molecule on the Ge(100) ? 2 × 1 surface via O–H dissociation and interdimer N dative bonding is both kinetically and thermodynamically favorable and that N–H dissociation of this adduct is feasible at room temperature given incomplete thermal accommodation along the reaction pathway.     

Fourier transform measurements of SO2 absorption cross sections:: I. Temperature dependence in the 24 000–29 000 cm−1 (345–420 nm) region

Absorption cross sections of SO₂ have been obtained in the 24 000–29 000 cm^?1 spectral range (345–420 nm) with a Fourier transform spectrometer at a resolution of 2 cm^?1. Pure SO₂ samples were used and measurements were performed at room temperature (298 K) as well as at 318, 338 and 358 K. This is the first time that temperature effects in this spectral region are reported and investigated. This paper is the first of a series that will report on measurements of the absorption cross section of SO₂ in the UV/visible region at a higher than previously reported resolution and that will investigate temperature effects in support of tropospheric, stratospheric and astrophysical or planetary applications.     

ICLAS of water in the 770 nm transparency window (12 746–13 558 cm−1). Comparison with current experimental and calculated databases

The absorption spectrum of water vapor has been investigated by intracavity laser spectroscopy (ICLAS) in the 12 746–13 558 cm^?1 spectral region corresponding to an interesting transparency window of the atmosphere, partly obscured by the A band of molecular oxygen.The achieved sensitivity—in the order of α_min～10^?9 cm^?1—has allowed one to measure 1062 water lines with intensities ranging from 1.6×10^?28 to 2.35×10^?24 cm/molecule at 296 K. A total of 169 new and improved energy levels belonging to 21 vibrational states could be determined from 374 newly measured transitions. The retrieved experimental line list is compared with the spectra calculated by Schwenke and Partridge, and Barber and Tennyson. Comparison with the available experimental databases shows that the obtained results represent a significant improvement of the knowledge of the water absorption in the considered region, in particular in the region of the oxygen A band.