四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Photochromism of mixed crystals containing bisthienyl-, bisthiazolyl-, and bisoxazolylethene derivatives

Single crystals composed of two or three different kinds of diarylethenes, having similar geometrical structures but different colors in the closed-ring isomers, 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (1a), 1,2-bis(5-methyl-2-phenyl- 4-thiazolyl)perfluorocyclopentene (2a), and 1,2-bis(5-methyl-2-phenyl-4-oxazolyl)perfluorocyclopentene (3a) have been prepared in an attempt to form single crystals which exhibit different colors, depending on illumination wavelengths. When 1a and 2a are mixed in ethanol and the content of 2a in the feed is higher than that of 1a, only a needle-shaped crystal is obtained. The crystal shape is similar to that of 2a. On the other hand, high content of 1a in the feed leads to formation of a block-shaped crystal, of which the shape is similar to that of 1a. At a feed ratio of 1:1 for 1a and 2a, two types of crystals such as needle- and block-shapes are obtained from the same batch. Mixed crystals composed of three kinds of derivatives 1a/2a/3a have also been prepared. A crystal composed of the three derivatives in the molar ratio of 32 (1a):53 (2a):15 (3a) was obtained. X-ray analysis proved that 1a and 3a are packed in the crystal lattice of 2a. The mixed crystal 1a/2a/3a changed color from colorless to yellow, red, and blue upon irradiation with light of appropriate wavelengths.     

Refolding foldamers: triazene-arylene oligomers that change shape with chemical stimuli

We describe the preparation of five triazene-arylene oligomers (3, 4, 7, 8, and 11) and investigations of their folding properties in aqueous solution. These oligomers contain four 2-fold rotors and populate a conformational ensemble comprising at least 10 states. Extensive 1D and 2D NMR studies as well as X-ray crystallography establish that the presence of three members of the cucurbit[n]uril family (CB[n]), CB[10], CB[7], and CB[8], results in the selective population of the (a,a,a,a)-, (a,s,s,a)-, and (a,a,a,s)-conformers. As a result of the high affinity and highly selective binding properties of the CB[n] family, it is possible to fold a single foldamer strand (3) into the CB[8].(a,a,a,s)-3 conformer by the addition of CB[8], then unfold and refold it into the CB[7].(a,s,s,a)-3.CB[7] conformer by addition of CB[7] and 3,5-dimethylaminoadamantane (17), then unfold and refold it again into the CB[10].(a,a,a,a)-3 conformer by addition of CB[10].CB[5] and aminoadamantane (18). The transformation of CB[8].(a,a,a,s)-3 into CB[7].(a,s,s,a)-3.CB[7] proceeds through the intermediacy of CB [8].(a,a,s,a)-3.CB[7], which enhances the rate of dissociation of strand 3 from CB[8].     

Highly Stereoselective Cationic Cyclization Assisted by a Sulfenyl Group. Scope, Limitation, and Mechanism

When 8-acetoxy-2-methyl-9-(phenylthio)-2-nonene (1a) was treated with an acid, followed by a base, alkylative cyclization proceeded to give a mixture of 1,2-disubstituted cyclohexanes: 2a, 3a, and 4a. The stereochemistry of the reaction was only slightly affected by the leaving group and the reaction conditions, such as the temperature, solvent, and acid. However, the bulkiness of the sulfenyl group had a great effect on the stereochemical course of the reaction. High trans selectivity was attained when 1c (a derivative of 1a with a bulkier sulfenyl group) was used as a substrate. On the other hand, the length and rigidity of the carbon chain of the substrate also had a major effect on the stereochemistry of the reaction; a high cis selectivity was observed when 10a (a one-carbon-fewer analog of 1a) or 15a (a derivative with one more double bond in the carbon chain than in 1a) was used as the substrate. The reaction proceeded via a 6,5- or 5,5-fused-ring intermediate. The sulfenyl-group-assisted reaction could be a useful method for the stereoselective cyclization of acetates of alpha-sulfenylated secondary alcohols.     

Electrophoresis of a sphere at an arbitrary position in a spherical cavity filled with Carreau fluid

Boundary effects on the electrophoretic behavior of a charged entity are of both fundamental and practical significance. Here, they are examined by considering the case where a sphere is at an arbitrary position in a spherical cavity under conditions of low surface potential and weak applied electrical field. Previous analyses are extended to the case of a non-Newtonian fluid, and a Carreau model is adopted for this purpose. The effects of key parameters such as the thickness of a double layer, the relative sizes of particle and cavity, the position of a particle, and the nature of a fluid on the electrophoretic mobility of a particle are discussed. Several interesting phenomena are observed. For example, if the applied electric field points toward north, the mobility of a particle has a local maximum when it is at the center of a cavity. However, if a particle is sufficiently close to the north pole of a cavity, its mobility exhibits a local minimum as its position varies. This does not occur when the particle is close to the south pole of the cavity; instead, it may move in the direction opposite to that of the applied electric field. For a Newtonian fluid, if a particle is close to the north pole of a cavity, its upward movement yields a clockwise (counterclockwise) vortex near the north pole of the cavity and a counterclockwise (clockwise) vortex near the south pole of the cavity on its right (left)-hand side. The latter is not observed for a Carreau fluid.     

Controlled Dynamic Helicity of a Folded Macrocycle Based on a Bisterephthalamide with a Twofold Z‐Shaped Structure

Dynamic helicity in a folded macrocycle and control of the helical preference are described. We designed macrocycle 1 with a dual mode of folding through the integration of two flexible units that are arranged twice to form a cyclic structure. As a folding unit, we used a terephthalamide skeleton and a Z‐shaped hydrocarbon: the former acted as a control unit to induce a preference of a particular sense of dynamic helicity and the latter was just a spacer. A terephthalamide unit provided a binding site for capturing a ditopic hydrogen‐bonding guest when it adopted helically folded syn forms (M/P). Thus, only the terephthalamide unit controlled the helical sense of dynamic helicity in a folded macrocycle through the supramolecular transmission of chirality upon complexation with a chiral ditopic guest. In addition, chirality on a host could also contribute to the control of the helical preference in a folded macrocycle, which led to exceptionally enhanced chiroptical signals.     

Crystal engineering of photochromic diarylethene single crystals

Photochromic performance of diarylethene single crystals was controlled by crystal engineering using non-covalent aromatic-aromatic interactions as the directional intermolecular force. A diarylethene derivative with two pentafluorophenyl groups, 1,2-bis(2-methyl-5-pentafluorophenyl-3-thienyl)perfluorocyclopentene (1a), formed stoichiometric co-crystals with benzene (Bz) and naphthalene (Np) by aryl-perfluoroaryl interactions. Face-to-face pi-stacking interactions between the pentafluorophenyl groups of 1a and the aromatic molecules are responsible for 2:1 and 1:1 stoichiometric compositions in 1a/Bz and 1a/Np co-crystals, respectively. The diarylethene underwent thermally stable and photoreversible photochromic reactions in a homo-crystal of 1a and co-crystals 1a/Bz and 1a/Np. The absorption spectra of the photogenerated closed-ring isomers varied depending on the conformation of the diarylethene molecules packed in the crystals. The diarylethene 1a also formed 1:1 stoichiometric co-crystals with different kinds of diarylethenes, 1,2-bis(2-ethyl-5-phenyl-3-thienyl)perfluorocyclopentene (2a) and 1,2-bis[2-methyl-5-(1-naphthyl)-3-thienyl]perfluorocyclopentene (3a). Both co-crystals 1a/2a and 1a/3a showed photochromism. Although 1a, 2a, and 3a underwent efficient photocyclization reactions in their homo-crystals, highly selective photocyclization reactions of 2a or 3a were observed in the co-crystals. The selective reactions were confirmed by HPLC and X-ray crystallography. Excited energy transfers from 1a to 2a and from 1a to 3a are considered to occur and cause the selective reactions.     

Modeling of the pseudo-colloids migration for multi-member decay chains with a arbitrary flux boundary condition in a fractured porous medium

A deep geologic disposal is the prime option for the long-term isolation of high-level radioactive waste (HLW) in many countries. For deeply located repositories, a radionuclide released from a failed waste container moves through the engineered and natural barriers before it reaches a biosphere. The pseudo-colloid which a radionuclide is adsorbed on a moving natural humic or fulvic colloid can be generated in a fractured porous medium. The size of a colloid is in general in the order of a hundred nanometer so that its migration velocity in a fracture is higher than that of a radionuclide due to the hydrochromatic effect. A large colloid cannot diffuse easily into a surrounding rock. Also, there are many kinds of actinides and these actinides have decay chains. In this analysis, the canonical form solution is derived for a pseudo-colloid and a solute in a fracture and a surrounding rock with a realistic inlet boundary condition with multi-member decay chains. It is used the Fortran based a computational code which uses a special subroutine for the inversion of Laplace transform. Consequently, the role of the pseudo-colloid in the fractured porous medium is important and also their decay chains aren’t neglected in the performance assessment of the HLW.     

Pyridoxylated Polymerized Hemoglobin Solution Processing

Glutaraldehyde hemoglobin polymerization gives too many high polymers, resulting in a too viscous solution. We describe here an alternate method leading to superior results, as compared to the classical one. This method includes a molecular fractionation step using a tangential flow ultrafiltration that secondarily lowers the unpolymerized tetramer’s content of a mildly polymerized, pyridoxylated hemoglobin solution (Pyr-Poly Hb). This leads to an adequately polymerized product with a lesser high polymer content, implying a lower viscosity. We thus obtain a pyridoxylated, polymerized molecular fractionated solution presenting suitable features as a blood substitute: A 7.5 g% hemoglobin 2 g% albumin solution had a 16% unpolymerized tetramer’s ratio, a 1.8 mPas viscosity, a P₅₀ of 2.8 kPa, a Hill coefficient of 2.1, a binding coefficient of 1.3 mL/g, a colloid osmotic pressure of 2.4 kPa, and a methemoglobin concentration of 3% Male Sprague-Dawley rats undergoing an isovolumic blood exchange with this Pyr-Poly Hb solution, down to a 2% hematocrit, present a mean survival time of 20 h.     

Modeling the inhibition of peptide deformylase by hydroxamic acids: influence of the sulfur donor

The first complexes containing both a sulfur atom and a hydroxamate moiety coordinated to a biologically relevant transition metal were synthesized as models for the structure of inhibited peptide deformylases. Two of these [(N(2)S)Zn(hydroxamate)] complexes were characterized by X-ray crystallography. The first contains a thioether and a simple hydroxamate, the second a thiolate and a N-substituted hydroxamate. Isolation of a complex with a thiolate and a simple hydroxamate group was not possible.     

Association-dissociation equilibrium of loop structures in single-chain folding into a toroidal condensate

Recently, it has been revealed that a semiflexible polyelectrolyte chain can form a partially folded conformation stably as a result of an electrostatic interaction. Interestingly, there are cases where the appearance of this structure requires a high-salt condition of a solution. In order to solve this problem, we consider the double equilibrium of the formation of loops and their aggregation on a single-chain polymer. First, an aggregate with a typical surface energy is examined as a test case. The basic nature of the folding transition is discussed with regard to the chemical potential of loop structures. Next, we consider a charged aggregate for which the interior is completely neutralized by counter ions. In this model, a partially folded chain appears with a high-salt condition. Based on this model, screened interactions between surface charges and a toroidal shape of a folded structure are considered essential factors bihind this phenomenon.     

Synthesis, properties, and redox behavior of di(1-azulenyl)(2- and 3-thienyl)methyl cations and dications composed of two di(1-azulenyl)methylium units connected with 2,5-thiophenediyl and 2,5-thienothiophenediyl spacers

The titled stable monocations, di(1-azulenyl)(2- and 3-thienyl)methyl cations 7a,b and 8a,b and dications composed of two di(1-azulenyl)methylium units connected with 2,5-thiophenediyl and 2,5-thieno[3,2-b]thiophenediyl spacers 9a,b and 10a,b were prepared by hydride abstraction of the corresponding methane derivatives. These mono- and dications 7a,b, 8a,b, 9a,b, and 10a,b showed high stability with large pK(R)+ values. The values of monocations 7a,b and 8a,b were 11.2-11.8 +/- 0.1 and 11.4-12.4 +/- 0.1, respectively. Two cation units in dications 9a,b and 10a,b were neutralized via one step at the pH of 11.1-11.7 +/- 0.1, which corresponds to the average of the pK(R)+ values of the dications and half-neutralized monocations. Electrochemical behavior of 7a,b, 8a,b, 9a,b, and 10a,b was examined by cyclic voltammetry (CV). Formation of the thienoquinoid products 18a,b and 19a,b from 9a,b and 10a,b was characterized by UV-vis spectroscopy under electrochemical reduction conditions. Chemical reduction of 9a,b and 10a,b with Zn powder in acetonitrile afforded 18a,b and 19a,b as deep-colored crystals, which exhibited rather high electron-donating ability.     

Acyl- und Alkylidenphosphane. XVIII. Monoacetyl- und Diacetylphosphan

Acyl- and Alkylidenephosphines. XVIII. Monoacetyl- and Diacetylphosphine When triacetylphosphine 3a is treated with methanol 4 or benzyl alcohol 6 P? C(O) bonds are cleaved and a mixture of diacetyl- 2a and monoacetylphosphine 1a is formed. The thermally labile phosphine 1a decomposes completely within a few hours at +20°C; but 2a also reacts slowly within days to give triacetylphosphine 3a and further unknown compounds. As it is found by nmr-spectroscopic studies the acidic hydrogen atoms of monoacetylphosphine 1a are both bound to phosphorus. In liquid diacetylphosphine 2a or in solutions of this compound, However, there exists an equilibrium between the keto tautomer K- 2a with a PH and the enol tautomer E- 2a with an O? H? O group; compared with pentane-2,4-dione 8a the keto tautomerpredo minates in 2a . As in 1,3-diketones a low temperature and a small dielectric constant of the solvent increase the amount of enol tautomer E- 2a present. The ¹H-nmr resonance of the enolic hydrogen atom is observed at very low field (δ = 18,3 ppm).     

Surface integration approach: a new technique for evaluating geometry dependent forces between objects of various geometry and a plate

We present a new approach, which can be considered as a generalization of the Derjaguin approximation, that provides exact means to determine the force acting between a three-dimensional body of any shape and a half-space mutually interacting via pairwise potentials. Using it, in the cases of the Lennard-Jones, standard and the retarded (Casimir) van der Waals interactions we derive exact expressions for the forces between a half-space or a slab of finite thickness and an ellipsoid in a general orientation, which in the simplest case reduces to a sphere, a tilted fully elliptic torus, and a body obtained via rotation of a single loop generalized Cassini oval, a particular example of which mimics the shape of a red blood cell. The results are obtained for the case when the object is separated from the plane via a non-polar continuous medium that can be gas, liquid or vacuum. Specific examples of biological objects of various shapes interacting with a plate like substrates are also considered.     

Gradient extremals and valley floor bifurcations on potential energy surfaces

Gradient extremals are curves in configuration space denned by the condition that the gradient of the potential energy is an eigenvector of the Hessian matrix. Solutions of a corresponding equation go along a valley floor or along a crest of a ridge, if the norm of the gradient is a minimum, and along a cirque or a cliff or a flank of one of the two if the gradient norm is a maximum. Properties of gradient extremals are discussed for simple 2D model surfaces including the problem of valley bifurcations.     

Production of a positron microprobe using a transmission remoderator.

A production method for a positron microprobe using a beta+-decay radioisotope (22Na) source has been investigated. When a magnetically guided positron beam was extracted from the magnetic field, the combination of an extraction coil and a magnetic lens enabled us to focus the positron beam by a factor of 10 and to achieve a high transport efficiency (71%). A 150-nm-thick Ni(100) thin film was mounted at the focal point of the magnetic lens and was used as a remoderator for brightness enhancement in a transmission geometry. The remoderated positrons were accelerated by an electrostatic lens and focused on the target by an objective magnetic lens. As a result, a 4-mm-diameter positron beam could be transformed into a microprobe of 60 microm or less with 4.2% total efficiency. The S parameter profile obtained by a single-line scan of a test specimen coincided well with the defect distribution. This technique for a positron microprobe is available to an accelerator-based high-intensity positron source and allows 3-dimensional vacancy-type defect analysis and a positron source for a transmission positron microscope.     

Electrophoresis of a rigid sphere in a Carreau fluid normal to a large charged disk

The electrophoresis of a rigid sphere in a Carreau fluid normal to a large disk is analyzed theoretically under the conditions of low surface potential and weak applied electric field. Previous analyses are extended to the case where a disk can be charged, and a more realistic electrostatic force formula is applied. We show that the qualitative behavior of a sphere depends largely on its distance from a disk, the thickness of double layer, and the nature of a fluid. In general, the presence of a disk has the effect of increasing the conventional hydrodynamic drag on a sphere, and a decrease in the thickness of the double layer surrounding a sphere has the effect of enhancing the shear-thinning effect. However, this might not be the case if a sphere is uncharged and a disk is charged, where the osmotic pressure field and the induced charge on the sphere surface can be significant. The shear-thinning effect is important only if the thickness of double layer is sufficiently thick. This result can play a significant role in practice such as in electrophoretic deposition, where the deposition electrode is charged and the fluid medium is usually of shearing-thinning nature.     

Röntgenstrukturanalyse eines neuartigen spirocyclischen Diglycosides,eines Abbauproduktes der Antibiotika Papulacandin A,B and C

X-Ray Analysis of a Novel Spirocyclic Diglycoside, a Degradation Product of the Antibiotics Papulacandin A, B and C Structure 4 has been established for a novel spirocyclic diglycoside which is a degradation product of the antibiotics papulacandin A, B and C. By X-ray analysis the diglycoside was shown to consist of a galactose moiety connected by a β-1, 4-linkage to a glucose. This diglycoside is further connected by a spiro union to a oxaindan-diol moiety.     

Self-propelled motion of a fluid droplet under chemical reaction

We study self-propelled dynamics of a droplet due to a Marangoni effect and chemical reactions in a binary fluid with a dilute third component of chemical product which affects the interfacial energy of a droplet. The equation for the migration velocity of the center of mass of a droplet is derived in the limit of an infinitesimally thin interface. We found that there is a bifurcation from a motionless state to a propagating state of droplet by changing the strength of the Marangoni effect.     

Synthesis of well-defined polymers with protected silanol groups by atom transfer radical polymerization and their use for the fabrication of polymeric nanoparticles

Copper-mediated atom transfer radical polymerization (ATRP) of a protected silanol group-holding methacrylate, methacryloxypropyltrimethoxysilane (MOPS), was investigated. In a dry condition using carefully distilled solvent and monomer, the polymerization proceeded in a living fashion providing a low-polydispersity polymer with a predicted molecular weight. The ATRP in conjunction with the sequential monomer addition of methyl methacrylate (MMA) and MOPS afforded a block copolymer of the type PMMA-b-poly(MMA-r-MOPS). The heat treatment of a solution of the block copolymer in the presence of a catalytic amount of ammonia gave a polymeric core-shell nanoparticle with a shell of PMMA moieties and a core of the poly(MMA-r-MOPS) blocks cross-linked via the condensation of the trimethoxysilane groups of the MOPS moieties.