首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Transport and magnetic properties of LaMnO3+δ nanoparticles with average size of 18 nm have been investigated. The ensemble of nanoparticles exhibits a paramagnetic to ferromagnetic (FM) transition at TC~246 K, while the spontaneous magnetization disappears at T≈270 K. It was found that the blocking temperature lies slightly below TC. The temperature dependence of the resistivity shows a metal–insulator transition at T≈192 K and low-temperature upturn at T<50 K. The transport at low temperatures is controlled by the charging energy and spin-dependent tunnelling through grain boundaries. The low temperature IV characteristics are well described by indirect tunnelling model while at higher temperatures both direct and resonant tunnelling dominates.  相似文献   

2.
AC susceptibility and DC magnetization measurements were performed for the RPdIn (R=Gd–Er) compounds both in the paramagnetic and in the ordered state. In opposite to GdPdIn, which is a ferromagnet (Tc=102 K), the other samples show a complex ferrimagnetic behavior with the additional transition at Tt<Tc. In the high-temperature phase (for Tt<T<Tc), a ferromagnetic interaction dominates, while in the low-temperature phase (for TTt) antiferromagnetic interactions with the magnetocrystalline anisotropy, especially strong for TbPdIn, come into play. The ordering temperatures are Tc=70, 34, 25 and 12.3 K for Tb-, Dy-, Ho- and ErPdIn respectively, while transition temperatures are Tt=6, 14 and 6 K for Tb-, Dy- and HoPdIn respectively. TbPdIn reveals an additional transition at 27 K connected with the intermediate ferrimagnetic phase. The critical fields for the magnetization process of the low-temperature phase are high (52 and 150 kOe for TbPdIn and 32 kOe for DyPdIn at T=4.2 K) yet these values decrease remarkably with increasing temperature. Results of the study are compared with magnetic and neutron diffraction data hitherto available. We state that irreversibility of the zero-field cooled–field cooled magnetization is not connected with the spin-glass phase claimed elsewhere.  相似文献   

3.
The temperature–dependent electrical resistivity ρ(T) in metallic and semiconducting phase of ZnO nanostructures is theoretically analysed. ρ(T) shows semiconducting phase in low temperature regime (140 K<T<180 K), shows an absolute minimum near 180 K and increases linearly with T at high temperatures (200 K<T<300 K). The resistivity in metallic phase is estimated within the framework of electron–phonon and electron–electron scattering mechanism. The contributions to the resistivity by inherent acoustic phonons (ρac) as well as high frequency optical phonons (ρop) were estimated using Bloch–Gruneisen (BG) model of resistivity. The electron–electron contributions ρe?e=BT2 in addition with electron–phonon scattering is also estimated for complete understanding of resistivity in metallic phase. Estimated contribution to resistivity by considering both phonons, i.e., ωac and ωop and the zero limited resistivity are added with electron–electron interaction ρe–e to obtain the total resistivity. Resistivity in Semiconducting phase is discussed with small polaron conduction (SPC) model. The SPC model consistently retraces the low temperature resistivity behaviour (140 K<T<180 K). Finally the theoretically calculated resistivity is compared with experimental data which appears favourable with the present analysis in wide temperature range.  相似文献   

4.
We have investigated the magnetic and electronic properties of the antiferromagnetic Kondo lattice YbPtAl using the 170Yb Mössbauer effect at ambient pressure (1.8<T<10 K), electrical resistance (1.8<T<300 K) and X-ray diffraction (T=300 K) techniques at high pressures up to 26 GPa. We find a complex magnetic state in YbPtAl at ambient pressure and an unusual volume-induced change of TN. It is suggested, that the anomalous volume dependence of TN is due to the interplay between frustrated anisotropic exchange interactions and magnetocrystalline anisotropy. The magnetic frustration originates from the topology of the crystal lattice.  相似文献   

5.
In the present work, the synthesis and characterization of the Bis(4-acetylanilinium) tetrachlorocuprate(II) compound are presented. The structure of this compound is analyzed by X-ray diffraction which confirms the formation of single phase and is in good agreement the literature. Indeed, the Thermo gravimetric Analysis (TGA) shows that the decomposition of the compound is observed in the range of 420–520 K. However, the differential thermal analysis (DTA) indicates the presence of a phase transition at T=363 k. Furthermore, the dielectric properties and AC conductivity were studied over a temperature range (338–413 K) and frequency range (200 Hz–5 MHz) using complex impedance spectroscopy. Dielectric measurements confirmed such thermal analyses by exhibiting the presence of an anomaly in the temperature range of 358–373 K. The complex impedance plots are analyzed by an electrical equivalent circuit consisting of resistance, constant phase element (CPE) and capacitance. The activation energy values of two distinct regions are obtained from log σT vs 1000/T plot and are found to be E=1.27 eV (T<363 K) and E=1.09 eV (363 K<T).The frequency dependence of ac conductivity, σac, has been analyzed by Jonscher's universal power law σ(ω)=σdc+s. The value of s is to be temperature-dependent, which has a tendency to increase with temperature and the non-overlapping small polaron tunneling (NSPT) model is the most applicable conduction mechanism in the title compound.  相似文献   

6.
Temperature-dependent 57Fe Mössbauer spectroscopy to 40 GPa shows that Fe3O4 magnetite undergoes a coordination crossover (CC), whereby charge density is shifted from octahedral to tetrahedral sites and the spinel structure thus changes from inverse to normal with increasing pressure and decreasing temperature. A precursor to the CC is a d-charge decoupling within the octahedral sites at the inverse-spinel phase. The CC transition takes place almost exactly at the Verwey transition temperature (TV=122 K) at ambient pressure. While TV decreases with pressure the CC-transition temperature increases with pressure, reaching 300 K at 10 GPa. The d electron localization mechanism proposed by Verwey and later by Mott for T<TV is shown to be unrelated to the actual mechanism of the metal–insulator transition attributed to the Verwey transition. It is proposed that a first-order phase transition taking place at ∼TV at ambient pressure opens a small gap within the oxygen p-band, resulting in the observed insulating state at T>TV.  相似文献   

7.
Luminescence properties of CdMoO4 crystals have been investigated in a wide temperature range of T=5–300 K. The luminescence-excitation spectra are examined by using synchrotron radiation as a light source. A broad structureless emission band appears with a maximum at nearly 550 nm when excited with photons in the fundamental absorption region (<350 nm) at T=5 K. This luminescence is ascribed to a radiative transition from the triplet state of a self-trapped exciton (STE) located on a (MoO4)2? complex anion. Time-resolved luminescence spectra are also measured under the excitation with 266 nm light from a Nd:YAG laser. It is confirmed that triplet luminescence consists of three emission bands with different decay times. Such composite nature is explained in terms of a Jahn–Teller splitting of the triplet STE state. The triplet luminescence at 550 nm is found to be greatly polarized in the direction along the crystallographic c axis at low temperatures, but change the degree of polarization from positive to negative at T>180 K. This remarkable polarization is accounted for by introducing further symmetry lowering of tetrahedral (MoO4)2? ions due to a uniaxial crystal field, in addition to the Jahn–Teller distortion. Furthermore, weak luminescence from a singlet state locating above the triplet state is time-resolved just after the pulse excitation, with a polarization parallel to the c axis. The excited sublevels of STEs responsible for CdMoO4 luminescence are assigned on the basis of these experimental results and a group-theoretical consideration.  相似文献   

8.
Magnetisation and magneto-resistance measurements have been carried out on superconducting Ba1?xKxFe2As2 samples with x = 0.40 and 0.50. From high field magnetization hysteresis measurements carried out in fields up to 16 T at 4.2 K and 20 K, the critical current density has been evaluated using the Bean critical state model. The JC determined from the high field data is >104 A/cm2 at 4.2 K and 5 T. The superconducting transitions were also measured resistively in increasing applied magnetic fields up to 12 T. From the variation of the TC onset with applied field, dHC2/dT at TC was obtained to be ?7.708 T/K and ?5.57 T/K in the samples with x = 0.40 and 0.50.  相似文献   

9.
We have measured the zero-field electrical resistivity in the temperature range 5–295 K and magnetoresistance in magnetic fields of up to 12 T of Gd5(Si0.1Ge0.9)4. The resistivity changes drastically at the magnetostructural first-order transition (TC≅80 K on heating). This transition can be induced reversibly by the application of an external magnetic field above TC, producing a concomitant giant magnetoresistance (GMR) effect, Δρ/ρ≅−50%. This study demonstrates that (in addition to giant magnetocaloric and magnetoelastic effects) GMR can be tuned between ∼20 and ∼290 K in Gd5(SixGe1−x)4 with x⩽0.5 by simply adjusting the Si : Ge ratio.  相似文献   

10.
Transport properties of (Cu, C)Ba2CuOx [(Cu, C)-1201] thin films have been characterized by in situ temperature dependence of resistivity, without breaking vacuum from the deposition to the measurement. In in situ transport properties measurements, the obtained results reveal that (Cu, C)Ba2CuOx films exhibit Tc > 20 K on the cased of conductivity at 290 K (σ[290 K]) > 4 × 102 S/cm and temperature coefficient of resistivity (TCR) > 1.5 × 10?3 K?1, and doping level of them should be in between under-doped and optimally-doped states. Their results suggest that there would be possible to further increases of Tc, and XPS data suggest that (Cu, C)-system should have the excellent dopability in their charge reservoir and the possibility of low anisotropy.  相似文献   

11.
PurposeSafe, sensitive, and non-invasive imaging methods to assess the presence, extent, and turnover of myocardial fibrosis are needed for early stratification of risk in patients who might develop heart failure after myocardial infarction. We describe a non-contrast cardiac magnetic resonance (CMR) approach for sensitive detection of myocardial fibrosis using a canine model of myocardial infarction and reperfusion.MethodsSeven dogs had coronary thrombotic occlusion of the left anterior descending coronary arteries followed by fibrinolytic reperfusion. CMR studies were performed at 7 days after reperfusion. A CMR spin-locking T1ρ mapping sequence was used to acquire T1ρ dispersion data with spin-lock frequencies of 0 and 511 Hz. A fibrosis index map was derived on a pixel-by-pixel basis. CMR native T1 mapping, first-pass myocardial perfusion imaging, and post-contrast late gadolinium enhancement imaging were also performed for assessing myocardial ischemia and fibrosis. Hearts were dissected after CMR for histopathological staining and two myocardial tissue segments from the septal regions of adjacent left ventricular slices were qualitatively assessed to grade the extent of myocardial fibrosis.ResultsHistopathology of 14 myocardial tissue segments from septal regions was graded as grade 1 (fibrosis area, < 20% of a low power field, n = 9), grade 2 (fibrosis area, 20–50% of field, n = 4), or grade 3 (fibrosis area, > 50% of field, n = 1). A dramatic difference in fibrosis index (183%, P < 0.001) was observed by CMR from grade 1 to 2, whereas differences were much smaller for T1ρ (9%, P = 0.14), native T1 (5.5%, P = 0.12), and perfusion (− 21%, P = 0.05).ConclusionA non-contrast CMR index based on T1ρ dispersion contrast was shown in preliminary studies to detect and correlate with the extent of myocardial fibrosis identified histopathologically. A non-contrast approach may have important implications for managing cardiac patients with heart failure, particularly in the presence of impaired renal function.  相似文献   

12.
The decomposition of dimethyl ether (CH3OCH3) has been investigated behind incident shock waves in a diaphragmless shock tube using laser schlieren densitometry, LS (T = 1500–2450 K, P = 57 ± 4, 125 ± 5 and 253 ± 12 Torr). The LS density gradient profiles were simulated and excellent agreement was found between the simulations and experimental profiles. Rate coefficients for CH3OCH3  CH3O + CH3 were obtained. They showed strong fall-off, and at the lower end of the experimental temperature range are close to the low pressure limit. First order rate coefficient expressions were determined over 1500 < T < 2450 K. k57Torr = (3.10 ± 1.0) × 1079T?19.03 exp(?54417/T) s?1, k125Torr = (1.12 ± 0.3) × 1083T?19.94 exp(?55554/T) s?1and k253Torr = (1.02 ± 0.3) × 1073T?17.09 exp(?51500/T) s?1. The effect of a roaming channel for decomposition of dimethyl ether was assessed and the best agreement was obtained with 1% dissociation of DME via the roaming path.  相似文献   

13.
Dimensionality effects on epitaxial and polycrystalline Cr1?xRux alloy thin films and in Cr/Cr–Ru heterostructures are reported. X-ray analysis on Cr0.9965Ru0.0035 epitaxial films indicates an increase in the coherence length in growth directions (1 0 0) and (1 1 0) with increasing thickness (d), in the range 20≤d≤300 nm. Atomic force microscopy studies on these films shows pronounced vertical growth for d>50 nm, resulting in the formation of columnar structures. The Néel temperatures (TN) of the Cr0.9965Ru0.0035 films show anomalous behaviour as a function of d at thickness d≈50 nm. It is interesting to note that this thickness corresponds to that for which a change in film morphology occurs. Experiments on epitaxial Cr1?xRux thin films, with 0≤x≤0.013 and d=50 nm, give TNx curves that correspond well with that of bulk Cr1?xRux alloys. Studies on Cr/Cr0.9965Ru0.0035 superlattices prepared on MgO(1 0 0), with the Cr layer thickness varied between 10 and 50 nm, keeping the Cr0.9965Ru0.0035 thickness constant at 10 nm, indicate a sharp decrease in TN as the Cr separation layers reaches a thickness of 30 nm; ascribed to spin density wave pinning in the Cr layers for d<30 nm by the adjacent CrRu layers.  相似文献   

14.
Magnetic properties and magnetocaloric effects (MCEs) of the intermetallic Ho3Al2 compound are investigated by magnetization and heat capacity measurements. Two successive magnetic transitions, a spin-reorientation (SR) transition at TSR=31 K followed by a ferromagnetic (FM) to paramagnetic (PM) transition at TC=40 K, are observed. Both magnetic transitions contribute to the MCE and result in a large magnetic entropy change (ΔSM) in a wide temperature range. The maximum values of ?ΔSM and adiabatic temperature change (ΔTad) reach 18.7 J/kg K and 4.8 K for the field changes of 0–5 T, respectively. In particular, a giant value of refrigerant capacity (RC) is estimated to be 704 J/kg for a field change of 5 T, which is much higher than those of many potential refrigerant materials with similar transition temperatures.  相似文献   

15.
Ignition-delay times for pure 3-pentanone, 3-pentanone/iso-octane (10/90% by volume) and 3-pentanone/n-Heptane mixtures (10/90% by volume) have been determined in a high-pressure shock tube under engine-relevant conditions (p5 = 10, 20, and 40 bar) for equivalence ratios ? = 0.5 and 1.0 and over a wide temperature range 690 K < T5 < 1270 K. The results were compared to ignition delay times of primary reference fuels under identical conditions. A detailed kinetics model is proposed for the ignition of all fuel mixtures. The model predicts well the ignition delay times for pure 3-pentanone for a wide range of pressure and temperature and equivalence ratios in argon dilution as well as in air. Ignition delay times for 3-pentanone-doped mixtures, especially in the low-temperature range are overpredicted by approx. a factor of 0.5 (at 800 K, 40 bar, ? = 1.0) by the calculation but the model still reproduces the overall trend of the experimental data. For lean conditions, 10% 3-pentanone reduces the reactivity of n-Heptane below 1000 K while for stoichiometric conditions it does not alter the ignition delay by more than 11% at 850 K and 20 bar. In iso-octane the effect is inverse, leading to acceleration of the main ignition. Based on the model, the influence of 3-pentanone on the main heat release in a n-Heptane-fueled HCCI engine cycle is simulated.  相似文献   

16.
X-ray single crystal refinement performed on the GdZrSb and HoZrSb compounds confirms the CeScSi-type structure for the RZrSb series. Spontaneous magnetization is detected for all the studied compounds (5 K (TmZrSb)<TC<61 K (TbZrSb)). Both TbZrSb and DyZrSb compounds exhibit a second magnetic transition at low temperature (29 and 21 K, respectively). Large coercive field is measured for these last compounds below the second magnetic transition temperature.  相似文献   

17.
Magnetic properties and magnetocaloric effects (MCEs) of the intermetallic Gd1?xHoxNiIn (x=0?1) compounds have been evaluated by magnetization and heat capacity measurements. The Curie temperature TC can be tuned from near 100 K to 20 K by substituting Ho for Gd atoms. In addition, all the compounds with Ho atoms undergo two successive magnetic transitions with the decrease of temperature: a paramagnetic (PM) to ferromagnetic (FM) transition around TC and a spin-reorientation (SR) transition around 7?9 K. It is found that both transitions contribute to the magnetic entropy change (ΔSM). For a field change of 5 T, the maximum values of ?ΔSM for Gd0.4Ho0.6NiIn are 6 J/kg K at Tt=9 K and 10 J/kg K at TC=52 K, respectively. These two ?ΔSM peaks overlap partly and result in a wide working temperature range of MCE, and thus leading to the largest RC value of 443 J/kg in the Gd1?xHoxNiIn system.  相似文献   

18.
In a temperature range 5–300 K the specific heat C(T) on a new mixed valence cobalt oxides REBaCo4O7 (RE=Dy, Ho, Er, Tm, Yb, Lu) was investigated. The first-order structural phase transitions from hexagonal P63mc to orthorhombic Cmc21 phase was indicated by a peak-like anomaly in C(T) curves at TS~160, 178, 224, and 280 K for RE=Lu, Yb, Tm, and Er correspondingly. The magnetic phase transitions was indicated as the changes of slope on the C(T) curves were found at corresponding temperatures: TN~50, 74, 98, and 98 K for RE=Lu, Yb, Tm, and Er, correspondingly.  相似文献   

19.
Proton diffusion in [(NH4)1 ? xRbx]3H(SO4)2 (0 < x < 1) has been studied by means of 1H spin-lattice relaxation times, T1. The relaxation times were measured at 200.13 MHz in the range of 296–490 K and at 19.65 MHz in the range of 300–470 K. In the high-temperature phase (phase I), translational diffusion of the acidic protons relaxes both the acidic protons and the ammonium protons. Spin diffusion averages the relaxation rate of the two kinds of protons, whereas proton exchange between them are slow. The spin-lattice relaxation times in phase I were analyzed theoretically, and parameters of proton diffusion were obtained. The mean residence time of the acidic protons increases with increase in x for [(NH4)1 ? xRbx]3H(SO4)2 (0  x  0.54). Rb3H(SO4)2 does not obey this trend. The results of NMR well explain the macroscopic proton conductivity.  相似文献   

20.
The paper reports the first measurements of the single crystal elastic constants of the heavy rare earth metal thulium as a function of temperature and magnetic field. The constants were obtained from ultrasonic velocity measurements over a temperature range of 4.2–296 K and in applied magnetic fields of up to 5 T. The elastic constants; C11, C33, C44 and C66=(C11–C12)/2 were determined from the ultrasonic velocities. Anomalies in the elastic constants were observed at 58 K from the c-axis propagated shear wave measurements and at 55 K from the c-axis propagated longitudinal wave measurements. Significant softening of the elastic constants C33 and C44 was observed close to TN. Application of a magnetic field (>2 T) along the c-axis direction induced further softening of the material. Electromagnetic acoustic transducers (EMATs) were also employed in addition to conventional piezoelectric quartz transducers. A marked increase in the EMATs acoustic coupling efficiency (generation and detection efficiency) occurred close to TN.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号