Measurements of Stark widths and shifts of Ne I lines using degenerate four-wave mixing and Thomson scattering methods

We report on measurements of Stark widths and shifts of four prominent Ne I lines of the 3s,3s′-3p transition arrays. The measurements were performed in an atmospheric-pressure arc discharge operated in argon–neon gas mixture.Sub-Doppler degenerate four-wave mixing technique was used to measure the line profiles, while Thomson scattering yielded the plasma parameters: electron density, n_e = (0.53–1.33) × 10²³ m^− 3, and electron temperature, T_e = 10,200–20,900 K. The measured profiles are symmetric within the uncertainty limits. The experimental Stark widths and shifts are compared with results of other experiments and theoretical calculations.     

Ab initio calculations and mechanism of two proton migration reactions of ethoxy radical

We present a direct ab initio and density functional theory dynamics study of the thermal rate constants of the two H-migration reactions of C₂H₅O radical. MPW1K/6-31+G(d,p) methods were employed to optimize the geometries of all stationary points and to calculate the minimum energy path (MEP). The energies of all the stationary points were refined at the QCISD(T)/aug-cc-pVTZ level of theory. The thermal gas phase rate constants were evaluated based on the energetics from the QCISD(T)/aug-cc-pVTZ//MPW1K/6-31+G(d,p) level of theory using both microcanonical variational transition state theory (μVT) and canonical variational transition state theory (CVT) with the Eckart tunneling correction in the temperature range of 200–2500 K. The extended Arrhenius expression fitted from the μVT/Eckart rate constants of 1,2 H-shift and 1,3 H-shift reactions of C₂H₅O radical in the temperature range of 200–2500 K are k = 3.90 × 10⁻³¹T^12.4e^{(−2.13 × 103/T)} and k = 2.83 × 10⁻²⁹T^11.9e^{(−2.24 × 103/T)} s⁻¹, respectively. The two isomerization rate constants exhibited positive temperature dependence in the calculated temperature region. The variational effects for the two isomerizations of ethoxy radical are small and the tunneling effects are important in the low temperature range. The titled reactions are minor and not essential compared to the decomposition pathways of ethoxy radical.     

Dissociative ionization of 1,4-bis(2,5-phenyloxazolyl)benzene

Dissociative ionization of 1,4-bis(2,5-phenyloxazolyl)benzene (POPOP) molecule by electron impact in gaseous phase is studied. Potentials of appearance of some fragments of the molecule under study are determined from the experimentally measured dependences of ionization cross-section on the ionizing electron energy. A new ion with m/z = 144 [C₉H₆ON]⁺ is detected in the mass spectrum of the POPOP molecule, being complementary to the fragment with m/z = 220 [C₁₅H₁₀ON]⁺. The threshold of appearance of this ion is determined (E_ap = 9.51 eV) as well as the first ionization potential of the POPOP molecule and fragment ion appearance potentials.     

Molar heat capacity and thermodynamic properties of 1-cyclohexene-1,2-dicarboxylic anhydride [C8H8O3]

The molar heat capacity C_p,m of 1-cyclohexene-1,2-dicarboxylic anhydride was measured in the temperature range from T=(80 to 360) K with a small sample automated adiabatic calorimeter. The melting point T_m, the molar enthalpy Δ_fusH_m and the entropy Δ_fusS_m of fusion for the compound were determined to be (343.46 ± 0.24) K, (11.88 ± 0.02) kJ · mol⁻¹ and (34.60 ± 0.06) J · K⁻¹ · mol⁻¹, respectively. The thermodynamic functions [H_(T)−H_(298.15)] and [S_(T)−S_(298.15)] were derived in the temperature range from T=(80 to 360) K with temperature interval of 5 K. The mass fraction purity of the sample used in the adiabatic calorimetric study was determined to be 0.9928 by using the fractional melting technique. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetric (TG) technique, and the process of the mass-loss of the sample was due to the evaporation, instead of its thermal decomposition.     

Measured Stark widths and shifts of the neutral argon spectral lines in 4s–4p and 4s–4p′ transitions

We investigate the Stark widths (W) and the shift (d), of the seven neutral argon (Ar I) spectral lines from the 4s–4p and 4s–4p′ transitions. The line shapes are measured in a linear, low-pressure, optically thin pulsed arc discharge at about 16 000 K electron temperature (T) and about 7.0 × 10²² m^− 3 electron density (N). The new data separates the electron width (W_e) and ion width W_i from the total Stark width (W_t), as well the separation of electron total Stark shift (d_t) on electron (d_e) and ion (d_i) parts. There are no theoretical predictions for these lines. Comparison to theoretical predictions for other lines within the same multiplets finds that the experimental data exhibits stronger influence by the ion contribution to the measured Ar I line shape. We have also deduced the ion broadening parameters which describe the influence of the ion static (A) and the ion–dynamical (D and E) effect on the width and the shift of the line shape.Applying the line deconvolution procedure, the basic plasma parameters i.e. electron temperature (T) and electron density (N) are recovered. The plasma parameters (T and N) are measured using independent diagnostics techniques as well. Good agreement is found among two sets of the N and T plasma parameters obtained from deconvolution procedure and independent diagnostics techniques.     

Thermodynamics of ion pairs in mixed solvents. I. The standard association constant of the ion pair [ MgSO4]oin { 0.03226 CO(NH2)2 + 0.96774 H2O}

The standard potential of the (Ag, AgCl) electrode E^o, the standard second ionization constant of sulfuric acid K₂, and the standard association constant of the ion pair [MgSO₄]^o, K in {0.03226CO(NH₂)₂ +  0.96774 H₂O } at five temperatures from 278.15 K to 318.15 K were determined from precise e.m.f. measurements of different cells without liquid junction. The dependence of p K on temperature T is expressed by the empirical equation pK =  6.617  −  777.9 · (K / T)  −  0.02001 · (T / K). The other thermodynamic functions of the association process were also calculated and show that the driving force for the process is the entropy of association.     

Thermodynamic study on the sublimation of six methylnitrobenzoic acids

The Knudsen mass-loss effusion technique was used to measure the vapour pressures at different temperatures of the following six compounds: 2-methyl-3-nitrobenzoic acid, between T =  357.16 K and T =  371.16 K; 2-methyl-6-nitrobenzoic acid, between T =  355.16 K and T =  369.16 K; 3-methyl-2-nitrobenzoic acid, between T =  371.16 K and T =  385.14 K; 3-methyl-4-nitrobenzoic acid, between T =  363.21 K and T =  379.16 K; 4-methyl-3-nitrobenzoic acid, between T =  363.10 K and T =  377.18 K; 5-methyl-2-nitrobenzoic acid, between T =  355.18 K and T =  371.08 K. From the temperature dependence of the vapour pressure, the standard molar enthalpies of sublimation were derived by the Clausius–Clapeyron equation and the molar entropies of sublimation at equilibrium pressures were calculated. Using estimated values for the heat capacity differences between the gas and the crystal phases of the studied compounds the standard, p^o =  10⁵Pa, molar enthalpies Δ_cr^gH_m^o, entropies Δ_cr^gS_m^oand Gibbs energies Δ_cr^gG_m^oof sublimation at T =  298.15 K, were derived:     

The enthalpy of dilution and thermodynamics of Na2CO3(aq) and NaHCO3(aq) fromT = 298 K toT = 523.15 K and pressure of 40 MPa

Molar enthalpies of dilution Δ_dilH_mofNa₂CO₃(aq) were measured from molality m =  1.45 mol · kg ^− 1to m =  0.008 mol · kg ^− 1at seven temperatures from T =  298 K toT =  523 K at the pressure p =  7 MPa, and at four temperatures fromT =  371 K to T =  523 K at the pressurep =  40 MPa. Molar enthalpies of dilutionΔ_dilH_m of NaHCO₃(aq) were measured fromm =  0.98 mol · kg ^− 1tom =  0.007 mol · kg ^− 1at the same temperatures and pressures. Hydrolysis and ionization equilibria contribute substantially to the measured enthalpies under many of the conditions of this study. Explicit consideration of these reactions, using thermodynamic quantities from previous studies, facilitates a quantitative representation of apparent molar enthalpies, activity coefficients, and osmotic coefficients with the Pitzer ion-interaction treatment over the ranges of temperature, pressure, and molality of the experiments.     

Thermodynamics of dibenzo-p-dioxin and 1,2,3,4-tetrachlorodibenzo-p-dioxin fromT = 5 K toT = 490 K

In adiabatic low-pressure and dynamic calorimeters the temperature dependence of the standard molar heat capacity C_{p, m}^oof dibenzo- p -dioxin and 1,2,3,4-tetrachlorodibenzo- p -dioxin have been determined at temperatures in the range T =  5 K to T =  490 K: from T =  5 K to T =  340 K with an accuracy of about 0.2 per cent and with an accuracy of 0.5 per cent to 1.5 per cent between T =  340 K and T =  490 K. The temperatures, enthalpies, and entropies of melting of the above compounds have been determined. The experimental data were used to calculate the thermodynamic functions C_{p, m}^o / R, Δ₀^TH_m^o / (R·K), Δ₀^TS_m^o / R, and Φ_m^o = Δ₀^TS_m^o − Δ₀^TH_m^o / T(where R is the universal gas constant) in the range T →  0 to T =  490 K. The isochoric heat capacity C_{V, m}of both dioxins has been estimated over the range T →  0 to T_fus. The effect of substitution of four hydrogen atoms by chlorine atoms on the lattice and atomic components of the isochoric heat capacity was considered.     

Size-dependence of the heat capacity and thermodynamic properties of hematite (α-Fe2O3)

The heat capacity of a 13 nm hematite (α-Fe₂O₃) sample was measured from T = (1.5 to 350) K using a combination of semi-adiabatic and adiabatic calorimetry. The heat capacity was higher than that of the bulk which can be attributed to the presence of water on the surface of the nanoparticles. No anomaly was observed in the heat capacity due to the Morin transition and theoretical fits of the heat capacity below T = 15 K show a small T³ dependence (due to lattice contributions) with no T^3/2 dependence. This suggests that there are no magnetic spin-wave contributions to the heat capacity of 13 nm hematite. The use of a large linear term to fit the heat capacity below T = 15 K is most likely due to superparamagnetic contributions. A small anomaly within the temperature range (4 to 8) K was attributed to the presence of uncompensated surface spins.     

Thermodynamics of proton dissociations from aqueous l-methionine at temperatures from (278.15 to 393.15) K,molalities from (0.0125 to 1.0) mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of l-methionine,methioninium chloride,and sodium methioninate

We have measured the densities of aqueous solutions of l-methionine, l-methionine plus equimolal HCl, and l-methionine plus equimolal NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, at molalities 0.0125 ⩽ m/mol · kg⁻¹ ⩽ 1.0 as solubilities allowed, and at p = 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values from the literature for V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change Δ_rC_p,m(T, m) for ionization of water to calculate parameters for Δ_rC_p,m(T, m) for the two proton dissociations from protonated aqueous cationic l-methionine. We integrated these results in an iterative algorithm using Young’s Rule to account for the effects of speciation and chemical relaxation on V_ϕ(T, m) and C_p,ϕ(T, m). This procedure yielded parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for methioninium chloride {H₂Met⁺Cl⁻(aq)} and for sodium methioninate {Na⁺Met⁻(aq)} which successfully modeled our observed results. Values are given for Δ_rC_p,m, Δ_rH_m, pQ_a, Δ_rS_m, and Δ_rV_m for the first and second proton dissociations from protonated aqueous l-methionine as functions of T and m.     

The thermodynamics of formation,molar heat capacity,and thermodynamic functions ofZrTiO4(cr)

As part of an ongoing study of titanate-based ceramic materials for the disposal of surplus weapons-grade plutonium, we report thermodynamic properties of a sample ofzirconium titanate (ZrTiO₄) quenched from a high-temperature synthesis. The standard enthalpy of formationΔ_fH_m^o was obtained by using high-temperature oxide-melt solution calorimetry. The molar heat capacity C_{p, m}was measured fromT =  13 K to T =  400 K in an adiabatic calorimeter and extrapolated toT =  1800 K by using an equation fitted to the low-temperature results. The results atT =  298.15 K areΔ_fH_m^o =  − (2024.1  ±  4.5)kJ · mol ^− 1,Δ₀^TS_m^o =  (116.71  ±  0.31 )J · K ^− 1· mol ^− 1, andΔ_fG_m^o =  − (1915.8  ±  4.5 )kJ · mol ^− 1; the molar entropy includes a contribution of 2 R ln2 to account for the random mixing of Zr^4 + and Ti^4 + on a four-fold crystallographic site. Values for the standard molar Gibbs energies and enthalpies of formation of ZrTiO_4,Δ_fG_m^oandΔ_fH_m^o , and for the free energies and enthalpies for the reaction to form ZrTiO₄(cr) from ZrO₂(cr) and TiO₂(cr), are tabulated over the temperature interval, 0 ⩽(T / K)⩽ 1800. From these results, we conclude that ZrTiO₄is not stable with respect to (ZrO₂ +  TiO₂) at T =  298.15 K, but becomes so at T =  (1250  ±  150) K.     

Impact of Fe3+ on UV absorption of K2Al2B2O7 crystals

K₂Al₂B₂O₇ (KABO) is a new nonlinear optical crystal capable of laser harmonic generation in the UV range. However, abnormal UV absorption prevents its application in effectively generating UV light with wavelength shorter than 300 nm. The transmittance spectra of the grown crystals show distinct absorption bands at 216 nm and 264 nm. It is observed that the UV absorption is strongly correlated with iron impurity at a parts per million (ppm) level. Furthermore, electron paramagnetic resonance (EPR) spectra of the absorbing crystals show a strong signal at g = 2.00 position corresponding to a Fe³⁺ center. A new crystal growth method which reduces the iron content has been proposed and results show that the new KABO crystal is free from the Fe³⁺ UV absorptions.     

The heat capacities and thermodynamic properties of NiAl2O4 and CoAl2O4 measured by adiabatic calorimetry from T = (4 to 400) K

The low-temperature heat capacity of NiAl₂O₄ and CoAl₂O₄ was measured between T = (4 and 400) K and thermodynamic functions were derived from the results. The measured heat-capacity curves show sharp anomalies peaking at around T = 7.5 K for NiAl₂O₄ and at T = 9 K for CoAl₂O₄. The exact cause of these anomalies is unknown. From our results, we suggest a standard entropy for NiAl₂O₄ at T = 298.15 K of (97.1 ± 0.2) J · mol^?1 · K^?1 and for CoAl₂O₄ of (100.3 ± 0.2) J · mol^?1 · K^?1.     

Determination of thermodynamic properties of Na2S using solid-state EMF measurements

To obtain reliable thermodynamic data for Na₂S(s), solid-state EMF measurements of the cell Pd(s)|O₂(g)|Na₂S(s), Na₂SO₄(s)|YSZ| Fe(s), FeO(s)|O₂(g)_ref| Pd(s) were carried out in the temperature range 870 < T/K < 1000 with yttria stabilized zirconia as the solid electrolyte. The measured EMF values were fitted according to the equation E_fit/V (±0.00047) = 0.63650 − 0.00584732(T/K) + 0.00073190(T/K) ln (T/K). From the experimental results and the available literature data on Na₂SO₄(s), the equilibrium constant of formation for Na₂S(s) was determined to be lg K_f(Na₂S(s)) (±0.05) = 216.28 − 4750(T/K)⁻¹ − 28.28878 ln (T/K). Gibbs energy of formation for Na₂S(s) was obtained as Δ_fG^∘(Na₂S(s))/(kJ · mol⁻¹) (±1.0) = 90.9 − 4.1407(T/K) + 0.5415849(T/K) ln (T/K). By applying third law analysis of the experimental data, the standard enthalpy of formation of Na₂S(s) was evaluated to be Δ_fH^∘(Na₂S(s), 298.15 K)/(kJ · mol⁻¹) (±1.0) = −369.0. Using the literature data for C_p and the calculated Δ_fH^∘, the standard entropy was evaluated to S^∘(Na₂S(s), 298.15 K)/(J · mol⁻¹ · K⁻¹) (±2.0) = 97.0.     

Influence of sample temperature on the expansion dynamics and the optical emission of laser-induced plasma

We investigate the influence of sample temperature on the dynamics and optical emission of laser induced plasma for various solid materials. Bulk aluminum alloy, silicon wafer, and metallurgical slag samples are heated to temperature T_S ≤ 500 °C and ablated in air by Nd:YAG laser pulses (wavelength 1064 nm, pulse duration approx. 7 ns). The plasma dynamics is investigated by fast time-resolved photography. For laser-induced breakdown spectroscopy (LIBS) the optical emission of plasma is measured by Echelle spectrometers in combination with intensified CCD cameras. For all sample materials the temporal evolution of plume size and broadband plasma emission vary systematically with T_S. The size and brightness of expanding plumes increase at higher T_S while the mean intensity remains independent of temperature. The intensity of emission lines increases with temperature for all samples. Plasma temperature and electron number density do not vary with T_S. We apply the calibration-free LIBS method to determine the concentration of major oxides in slag and find good agreement to reference data up to T_S = 450 °C. The LIBS analysis of multi-component materials at high temperature is of interest for technical applications, e.g. in industrial production processes.     

Thermodynamic study on the sublimation of 3-phenylpropionic acid and of three methoxy-substituted 3-phenylpropionic acids

The Knudsen mass-loss effusion technique was used to measure the vapour pressures at different temperatures of the following compounds: 3-phenylpropionic acid, between T =  305.17 K and T =  315.17 K; 3-(2-methoxyphenyl)propionic acid, between T =  331.16 K and T =  347.16 K; 3-(4-methoxyphenyl)propionic acid, between T =  341.19 K and T =  357.15 K; 3-(3,4-dimethoxyphenyl)propionic acid, between T =  352.18 K and T =  366.16 K. From the temperature dependence of the vapour pressure, the standard molar enthalpies of sublimation Δ_cr^gH_m^owere derived by the Clausius–Clapeyron equation and the molar entropies of sublimation at equilibrium pressures were calculated. On the basis of estimated values for the heat capacity differences between the gas and the crystal phases of the studied compounds the standard, p ^∘  =  10⁵Pa, molar enthalpies, entropies and Gibbs energies of sublimation at T =  298.15 K, were derived:     

Thermodynamics of proton dissociations from aqueous alanine at temperatures from (278.15 to 393.15) K,molalities from (0.0075 to 1.0) mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of alanine,alaninium chloride,and sodium alaninate

We have measured the densities of aqueous solutions of alanine, alanine plus equimolal HCl, and alanine plus equimolal NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, at molalities 0.0075 ⩽ m/mol · kg⁻¹ ⩽ 1.0, and at the pressure p = 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values from the literature for V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change Δ_rC_p,m(T, m) for ionization of water to calculate parameters for Δ_rC_p,m(T, m) for the two proton dissociations from protonated aqueous cationic alanine. We integrated these results in an iterative algorithm using Young’s Rule to account for the effects of speciation and chemical relaxation on V_ϕ(T, m) and C_p,ϕ(T, m). This procedure yielded parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for alaninium chloride {H₂Ala⁺Cl⁻(aq)} and for sodium alaninate {Na⁺Ala⁻(aq)} which successfully modeled our observed results. Values are given for Δ_rC_p,m, Δ_rH_m, pQ_a, Δ_rS_m, and Δ_rV_m for the first and second proton dissociations from protonated aqueous alanine as functions of T and m.     

Thermodynamic properties of tetraphenylphosphonium perchlorate and tetraphenylarsonium perchlorate fromT → 0 toT = 340 K

The temperature dependence of the standard molar heat capacity C_{p, m}^oof samples of crystalline tetraphenylphosphonium perchlorate and tetraphenylarsonium perchlorate was measured in an adiabatic low-pressure calorimeter between T =  4.8 K and T =  340 K and from T =  5.8 K to T =  340 K, respectively, mostly to within a precision of 0.2 per cent. For tetraphenylphosphonium perchlorate, an anomalous change of the heat capacity in the range T =  125 K to T =  185 K, probably arising from the excitation of hindered rotations of atomic groups, was found and its thermodynamic characteristics were determined. No such anomaly was observed for tetraphenylarsonium perchlorate. The data obtained were used to calculate the thermodynamic functions C_{p, m}^o(T) / R, Δ₀^TH_m^o / R·K, Δ₀^TS_m^o / R, and Φ_m^o = Δ₀^TS_m^o − Δ₀^TH_m^o / T(where R is the universal gas constant) of the compounds between T →  0 and T =  340 K.     

FT-IR emissivity measurements of Nb melt using an electrostatic levitation furnace

Total hemispherical emissivity (ε_T) and constant pressure heat capacity (C_p) of molten Nb, which has a high melting point, was measured using FT-IR combined with an electrostatic levitator. In order to heat the sample to temperatures higher than 2000 °C and avoid chemical reactions between the sample and a crucible, a containerless method was needed. By applying these methods, the measured ε_T of molten Nb at the melting temperature was 0.29, and the C_p was calculated as 41.9 J ⋅ mol⁻¹ ⋅ K⁻¹. Both data showed good agreement with the literature values. In addition, the result was compared with the Drude model and the difference of emissivity between Zr and Nb was discussed.