Synthesis of a new iron–sulfur cluster compound and its photocatalytic H2 evolution activity through visible light irradiation

A new iron–sulfur cluster compound, namely [(μ‐BNT)Fe₂(CO)₆] ( A ; BNT = (R)‐1,1′‐binaphthalene‐2,2′‐dithiol), was synthesized by self‐assembly of BNT with [Fe₃(CO)₁₂] and characterized using ¹H NMR, ¹³C NMR, infrared spectra and elemental analysis. The H₂ evolution activity of A was evaluated in a constructed homogeneous photocatalytic system by combining A as catalyst, xanthene dyes as photosensitizer and triethylamine as sacrificial reagent, to give efficient H₂ generation under visible‐light irradiation (λ > 420 nm). The maximum H₂ evolution of 404 turnovers (versus catalyst) was recorded under optimal conditions in CH₃CN–H₂O (1:1, v/v) after 4 h irradiation. The mechanism of H₂ evolution is briefly discussed using fluorescence spectra and electrochemical analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

Masked Rhodamine Dyes of Five Principal Colors Revealed by Photolysis of a 2‐Diazo‐1‐Indanone Caging Group: Synthesis,Photophysics, and Light Microscopy Applications

Caged rhodamine dyes (Rhodamines NN) of five basic colors were synthesized and used as “hidden” markers in subdiffractional and conventional light microscopy. These masked fluorophores with a 2‐diazo‐1‐indanone group can be irreversibly photoactivated, either by irradiation with UV‐ or violet light (one‐photon process), or by exposure to intense red light (λ～750 nm; two‐photon mode). All dyes possess a very small 2‐diazoketone caging group incorporated into the 2‐diazo‐1‐indanone residue with a quaternary carbon atom (C‐3) and a spiro‐9H‐xanthene fragment. Initially they are non‐colored (pale yellow), non‐fluorescent, and absorb at λ=330–350 nm (molar extinction coefficient (ε)≈10⁴ M^?1 cm^?1) with a band edge that extends to about λ=440 nm. The absorption and emission bands of the uncaged derivatives are tunable over a wide range (λ=511–633 and 525–653 nm, respectively). The unmasked dyes are highly colored and fluorescent (ε= 3–8×10⁴ M^?1 cm^?1 and fluorescence quantum yields (?)=40–85 % in the unbound state and in methanol). By stepwise and orthogonal protection of carboxylic and sulfonic acid groups a highly water‐soluble caged red‐emitting dye with two sulfonic acid residues was prepared. Rhodamines NN were decorated with amino‐reactive N‐hydroxysuccinimidyl ester groups, applied in aqueous buffers, easily conjugated with proteins, and readily photoactivated (uncaged) with λ=375–420 nm light or intense red light (λ=775 nm). Protein conjugates with optimal degrees of labeling (3–6) were prepared and uncaged with λ=405 nm light in aqueous buffer solutions (?=20–38 %). The photochemical cleavage of the masking group generates only molecular nitrogen. Some 10–40 % of the non‐fluorescent (dark) byproducts are also formed. However, they have low absorbance and do not quench the fluorescence of the uncaged dyes. Photoactivation of the individual molecules of Rhodamines NN (e.g., due to reversible or irreversible transition to a “dark” non‐emitting state or photobleaching) provides multicolor images with subdiffractional optical resolution. The applicability of these novel caged fluorophores in super‐resolution optical microscopy is exemplified.     

Far‐Red Emitting Fluorescent Dyes for Optical Nanoscopy: Fluorinated Silicon–Rhodamines (SiRF Dyes) and Phosphorylated Oxazines

Far‐red emitting fluorescent dyes for optical microscopy, stimulated emission depletion (STED), and ground‐state depletion (GSDIM) super‐resolution microscopy are presented. Fluorinated silicon–rhodamines (SiRF dyes) and phosphorylated oxazines have absorption and emission maxima at about λ≈660 and 680 nm, respectively, possess high photostability, and large fluorescence quantum yields in water. A high‐yielding synthetic path to introduce three aromatic fluorine atoms and unconventional conjugation/solubilization spacers into the scaffold of a silicon–rhodamine is described. The bathochromic shift in SiRF dyes is achieved without additional fused rings or double bonds. As a result, the molecular size and molecular mass stay quite small (<600 Da). The use of the λ=800 nm STED beam instead of the commonly used one at λ=750–775 nm provides excellent imaging performance and suppresses re‐excitation of SiRF and the oxazine dyes. The photophysical properties and immunofluorescence imaging performance of these new far‐red emitting dyes (photobleaching, optical resolution, and switch‐off behavior) are discussed in detail and compared with those of some well‐established fluorophores with similar spectral properties.     

Rhodamine Spiroamides for Multicolor Single‐Molecule Switching Fluorescent Nanoscopy

The design, synthesis, and evaluation of new rhodamine spiroamides are described. These molecules have applications in optical nanoscopy based on random switching of the fluorescent single molecules. The new markers may be used in (co)localization studies of various objects and their (mutual) positions and shape can be determined with a precision of a few tens of nanometers. Multicolor staining, good photoactivation, a large number of emitted photons, and selective chemical binding with amino or thiol groups were achieved due to the presence of various functional groups on the rhodamine spiroamides. Rigidized sulfonated xanthene fragment fused with six‐membered rings, N,N′‐bis(2,2,2‐trifluoroethyl) groups, and a combination of additional double bonds and sulfonic acid groups with simple aliphatic spiroamide residue provide multicolor properties and improve performance of the rhodamine spiroamides in photoactivation and bioconjugation reactions. Having both essential parts of the photoswitchable assembly—the switching and the fluorescent (reporter) groups—combined in one chemical entity make this approach attractive for further development. A series of rhodamine spiroamides is presented along with characterizations of their most relevant properties for application as fluorescent probes in single‐molecule switching and localization microscopy. Optical images with resolutions on the nanometer scale illustrate the potential of the labels in the colocalization of biological objects and the two‐photon activation technique with optical sectioning.     

Protonierung des 1,1,3,3,5,5‐Hexakis(dimethylamino)λ5‐[1,3,5]triphosphinins. Cyclotrimethylentriphosphinsäure. NMR‐Daten,Kristallstrukturen und quantenchemische Rechnungen

Protonation of 1,1,3,3,5,5‐Hexakis(dimethylamino)‐λ⁵‐[1,3,5]triphosphinine. Cyclotrimethylenetriphosphinic Acid. NMR Data, Crystal Structures, and Quantum Chemical Calculations Preparation of 1,1,3,3,5,5‐hexakis(dimethylamino)‐1,2‐dihydro‐3λ⁵,5λ⁵‐[1,3,5]triphosphininium‐tetrafluoroborate ( 3 ) und 1,1,3,3,5,5‐hexakis(dimethylamino)‐λ⁵‐[1,3,5]triphosphinanetriium‐tris(tetrafluoroborate) ( 4 ) from 1,1,3,3,5,5‐hexakis(dimethylamino)‐1λ⁵,3λ⁵,5λ⁵‐triphosphinine 1 and HBF₄ · O(C₂H₅)₂ are described. The structures of 3 und 4 are elucidated by n. m. r. and X‐ray structural analyses. By hydrolysis of 4 with conc. hydrochloric acid 1,3,5‐trioxo‐1λ⁵,3λ⁵,5λ⁵‐[1,3,5]triphosphinane‐1,3,5‐triol (cyclotrimethylene‐triphosphinic acid) ( 8 ) is formed. Neutralisation with NaOH yields its sodium salt 9 . 8 and 9 are characterized by their n. m. r. spectra. Quantum chemical calculations have been investigated for the compounds 1 ′– 4 ′ and the trianion 9 . The systems 1 ′– 4 ′ are distinguished from 1 – 4 by the size of the ligands at phosphorus which is reduced from N(CH₃)₂ to NH₂, respectively. The aims of the calculations are to elucidate hybridisations and molecular structures, Lewis or resonance structures, electronic charge distributions and NMR chemical shifts.     

Surface modification of inorganic oxide particles with silane coupling agent and organic dyes

The silane coupling agent 3‐glycidoxypropyl trimethoxylsilane (GPS) was grafted onto the surface of silica gel, P ₂ glass beads and TiO ₂ oxide particles. FT‐IR, thermogravimetric and elemental analysis were used to characterize the modified particles. The effects of various factors on the GPS grafting efficiency such as catalyst, GPS concentration, reaction temperature and time were studied. After modification with GPS, the xanthene dye rhodamine B and azo dyes 4‐phenylazophenol and 4‐phenylazoaniline, respectively, were grafted on to the particles, which were then used as pigment fillers. The colors of the pigments were adjusted by changing the kind of dyes, the concentration, the pH and the reaction solvents. Copyright © 2001 John Wiley & Sons, Ltd.     

Tetrazine Chromophore‐Based Metal–Organic Frameworks with Unusual Configurations: Synthetic,Structural, Theoretical,Fluorescent, and Nonlinear Optical Studies

Three unusual three‐dimensional (3D) tetrazine chromophore‐based metal–organic frameworks (MOFs) {(Et₄N)[WS₄Cu₃(CN)₂(4,4′‐pytz)_0.5]}_n ( 1 ), {[MoS₄Cu₄(CN)₂(4,4′‐pytz)₂] ? CH₂Cl₂}_n ( 2 ), and {[WS₄Cu₃(4,4′‐pytz)₃] ? [N(CN)₂]}_n ( 3 ; 4,4′‐pytz=3,6‐bis(4‐pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X‐ray diffraction, gel permeation chromatography, steady‐state fluorescence, and thermogravimetric analysis; their identities were confirmed by single‐crystal X‐ray diffraction studies. MOF 1 possesses the first five‐connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4⁴?6⁶) topology constructed from T‐shaped [WS₄Cu₃]⁺ clusters as nodes and single CN^?/4,4′‐pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4²⁰?6⁸) topology, in which the bridging 4,4′‐pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel‐shaped [WS₄Cu₃]⁺ clusters with a non‐interpenetrating honeycomb‐like framework and a heavily distorted “ACS” topology. Steady‐state fluorescence studies of 1 – 3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1 – 3 were investigated by using a Z‐scan technique with 5 ns pulses at λ=532 nm. The Z‐scan experimental results show that the π‐delocalizable tetrazine‐based 4,4′‐pytz ligands contribute to the strong third‐order NLO properties exhibited by 1 – 3 . Time‐dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.     

Chiral (Diphosphonite)platinum Complexes in Asymmetric Hydroformylation

The chiral diphosphonite ligand (11bR,11′bR)‐4,4′‐(9,9‐dimethyl‐9H‐xanthene‐4,5‐diyl)bis[dinaphtho[2,1‐d:1′,2′‐f][1,3,2]dioxaphosphepin] ((R,R)‐XantBino; (R)‐ 1 ), based on a rigid xanthene backbone, was applied in the Pt/Sn‐catalyzed hydroformylation of styrene ( 4a ), 4‐methylstyrene ( 4b ), vinyl acetate ( 4c ), and allyl acetate ( 4d ), by using a Pt/Sn ratio of 1 : 1. High ee of up to 80% were observed, along with good regioselectivities towards the desired branched aldehydes. For styrene, an interesting inversion in the stereoselection process was observed at elevated temperatures, and a mechanism is proposed considering the temperature dependence of the regioselectivity. The complex [PtCl₂{(S,S)‐XantBino}] ((S)‐ 2 ) was characterized by X‐ray crystal‐structure analysis, revealing an unusual out‐of‐plane ligand coordination of the metal fragment. The complex [PtCl(SnCl₃){(R,R)‐XantBino}] ((R)‐ 3 ) was characterized by means of ³¹P‐NMR spectroscopy.     

Polar Red‐Emitting Rhodamine Dyes with Reactive Groups: Synthesis,Photophysical Properties,and Two‐Color STED Nanoscopy Applications

The synthesis, reactivity, and photophysical properties of new rhodamines with intense red fluorescence, two polar residues (hydroxyls, primary phosphates, or sulfonic acid groups), and improved hydrolytic stability of the amino‐reactive sites (NHS esters or mixed N‐succinimidyl carbonates) are reported. All fluorophores contain an N‐alkyl‐1,2‐dihydro‐2,2,4‐trimethylquinoline fragment, and most of them bear a fully substituted tetrafluoro phenyl ring with a secondary carboxamide group. The absorption and emission maxima in water are in the range of 635–639 and 655–659 nm, respectively. A vastly simplified approach to red‐emitting rhodamines with two phosphate groups that are compatible with diverse functional linkers was developed. As an example, a phosphorylated dye with an azide residue was prepared and was used in a click reaction with a strained alkyne bearing an N‐hydroxysuccinimid (NHS) ester group. This method bypasses the undesired activation of phosphate groups, and gives an amphiphilic amino‐reactive dye, the solubility and distribution of which between aqueous and organic phases can be controlled by varying the pH. The presence of two hydroxyl groups and a phenyl ring with two carboxyl residues in the dyes with another substitution pattern is sufficient for providing the hydrophilic properties. Selective formation of a mono‐N‐hydroxysuccinimidyl ester from 5‐carboxy isomer of this rhodamine is reported. The fluorescence quantum yields varied from 58 to 92 % for free fluorophores, and amounted to 18–64 % for antibody conjugates in aqueous buffers. The brightness and photostability of these fluorophores facilitated two‐color stimulated emission depletion (STED) fluorescence nanoscopy of biological samples with high contrast and minimal background. Selecting a pair of fluorophores with absorption/emission bands at 579/609 and 635/655 nm enabled two‐color channels with low cross‐talk and negligible background at approximately 40 nm resolution.     

Synthesis,Structure, and Photophysical Properties of the Di‐ and Trinuclear Phosphine‐Diimine Complexes of Copper(I)

Reactions of [Cu(NCMe)₄]⁺ with stoichiometric amount of diphosphine R₂P–(C₆H₄)_n–PR₂, (R = NC₄H₄, n = 1; R = Ph, n = 1, 2, 3) or tri‐phosphine 1, 3, 5‐(PPh₂–C₆H₄–)₃–C₆H₃ ligands give the corresponding di‐ or trinuclear copper(I) acetonitrile‐phosphine complexes 1 – 5 . Substitution of the labile acetonitrile groups with chelating aromatic diimines – 2, 2′‐bipyridine (bpy), 1, 10‐phenanthroline (phen), 5, 6‐dimethyl‐1, 10‐phenanthroline (dmp), 5, 6‐dibromo‐1, 10‐phenanthroline (phenBr₂) – gives the corresponding substituted compounds 6 – 16 . In all complexes 1 – 16 each central Cu^I atom has tetrahedral configuration completed with two N‐ and two P‐donor groups. The compounds obtained were characterized using elemental analysis, ESI‐MS, X‐ray crystallography, and NMR spectroscopy. All phosphine‐diimine compounds 6 – 16 are photoluminescent at room temperature both in dichloromethane solution and in solid state (λ_ex = 385 nm). In CH₂Cl₂ solution the maxima of emission bands are found in a range 540–640 nm, and in solid in a similar range 538–620 nm. Emission of 6 – 16 is assigned to the triplet excited state dominated by the charge transfer transitions with contribution of the MLCT character.     

Rapid Synthesis of D‐A′‐π‐A Dyes through a One‐Pot Three‐Component Suzuki–Miyaura Coupling and an Evaluation of their Photovoltaic Properties for Use in Dye‐Sensitized Solar Cells

Twenty‐four D‐A′–π‐A dyes were rapidly synthesized through a one‐pot three‐component Suzuki–Miyaura coupling reaction, which was assisted by microwave irradiation. We measured the absorption spectra, electrochemical properties, and solar‐cell performance of all the synthesized dyes. The D5 πA4 dye contained our originally designed rigid and nonplanar donor and exerted the highest efficiency at 5.4 %. The short‐circuit current (J_sc) was the most important parameter for the conversion efficiency (η) in the case of the organic D‐A′‐π‐A dyes. Optimal ranges for the D‐A′‐π‐A dyes were observed for high values of J_sc/λ_max at λ=560–620 nm, an optical‐absorption edge of λ=690–790 nm, and E_HOMO and E_LUMO values of <1.14 and ?0.56 to ?0.76 V, respectively.     

Water Soluble Gold(I)‐diacetyl‐1,3,5‐triaza‐7‐phosphaadamantane‐arylazoimidazole Complexes: Synthesis and Spectroscopic Study

Reaction of [Au(DAPTA)(Cl)] with RaaiR’ in CH2Cl2 medium following ligand addition leads to [Au(DAPTA)(RaaiR’)](Cl) [DAPTA＝diacetyl-1,3,5-triaza-7-phosphaadamantane, RaaiR’＝p-R-C6H4-N＝N- C3H2-NN-1-R’, (1—3), abbreviated as N,N’-chelator, where N(imidazole) and N(azo) represent N and N’, respectively; R＝H (a), Me (b), Cl (c) and R’＝Me (1), CH2CH3 (2), CH2Ph (3)]. The 1H NMR spectral measurements in D2O suggest methylene, CH2, in RaaiEt gives a complex AB type multiplet while in RaaiCH2Ph it shows AB type quartets. 13C NMR spectrum in D2O suggest the molecular skeleton. The 1H-1H COSY spectrum in D2O as well as contour peaks in the 1H-13C HMQC spectrum in D2O assign the solution structure.     

Amino acid‐functionalized ethyl cellulose: Synthesis,characterization, and gas permeation properties

Amino acid esters of ethyl cellulose [R′ = H ( 1 ), CH₃ ( 2 ), CH₂CH(CH₃)₂ ( 3 ), CH₂CONH₂ ( 4 ), CH₂OCH₂C₆H₅ ( 5 , 5′ ), CH₂CH₂CH₂CH₂NHOCOC(CH₃)₃ ( 6 )] were synthesized in moderate to quantitative yields (30–99%) by the reaction of t‐butoxycarbonyl (t‐Boc)‐protected amino acids or an activated ester derivative with hydroxy groups of ethyl cellulose [EC; degree of substitution (DS_Et), 2.69]. The amino acid functionalities displaying varied chemical nature, shape, and bulk were used, and bulk of the substituent on the α‐carbon of amino acids was elucidated to be of vital significance for the observed degree of incorporation (DS_Est). ¹H NMR spectra were used to determine the degree of incorporation of amino acid moiety (DS_Est), and almost complete substitution of the hydroxy protons was revealed in 1 , 2 , and 5′ . The onset temperatures of weight loss of 1 – 6 were 198–218 °C, indicating fair thermal stability. The glass transition temperatures of the derivatized polymers were 30–40 °C lower than that of EC (T_g 131 °C; cf. T_g of 1 – 6 , 93.5–103 °C). Free‐standing membranes of EC and its amino acid esters ( 1 , 2 , 5 , 5′ , and 6 ) were fabricated, and enhanced permselectivity for CO₂/N₂ and CO₂/CH₄ gas pairs was discerned, when compared with EC. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3986–3993, 2010     

Synthesis,Structural Characterization and Luminescence Studies of Di‐ and Trinuclear Gold(I) Alkynyl‐phosphine Complexes

Reactions of the polymer {Au^IC₂Ph}_n with polyphosphine ligands [1,4‐bis(2‐diphenylphosphino‐1H‐imidazol‐1‐yl)‐benzene (dpib), 1,3,5‐tris(4‐diphenylphosphinophenyl)benzene (tppb), 2,2′‐bis(diphenylphosphanyl)‐4,4′‐bipyridine (dpbp), and 3,6‐bis(diphenylphosphanyl)pyridazine (dppz)] afforded four gold(I) alkynyl‐polyphosphine complexes [{AuC₂Ph}₂(μ‐dpib)] ( 1 ), [{AuC₂Ph}₃(μ₃‐tppb)] ( 2 ), [{AuC₂Ph}₂(μ‐dpbp)] ( 3 ), and [{AuC₂Ph}₂(μ‐dppz)] ( 4 ) in nearly quantitative yield. The compounds obtained were characterized using elemental analysis, ESI‐MS, X‐ray crystallography, and polynuclear NMR spectroscopy. Intermolecular aurophilic interaction together with π–π and σ–π stacking build up the supramolecular 3D network of complex 3 , whereas none of these intermolecular bondings were found in the crystal structures of compounds 1 , 2 , and 4 . Complexes 1 – 4 are luminescent both in solution (CH₂Cl₂) and in solid state under laser irradiation (λ_ex = 308 nm). In solution, the diphosphine complexes 1 – 4 display dual emission corresponding to ligand centered transitions (λ_em = 360–375 nm) along with weaker contribution from MLCT excited states at ca. 490 nm. The long wavelength component of the emission plays a dominant role in the solid state luminescence spectra of complexes 1 , 3 , and 4 (460, 544, 520 nm, respectively) whereas the triphosphine complex 2 shows dual luminescence (372 and 520 nm) with considerable contribution from ligand centered excited state.     

Early synthetic dyes – a challenge for tandem mass spectrometry

The present study concerns identification of early yellow synthetic dyes from silk fibers taken from the 1930 spring color palette of the Lyon Dyers’ Guild (La Chambre Syndicale des Teinturiers). The identification was based mainly on the electrospray ionization tandem mass spectrometry spectra obtained in the positive and negative ion modes. This technique was combined with high‐performance liquid chromatography, which enabled separation of the analyzed compounds. Spectra registered for each of the examined synthetic dye allowed identification of their lost fragments. Moreover, isotopic profiles and exact measurements of m/z by using time of flight analyzer made possible to evaluate their elemental composition. In consequence, all obtained data, including UV–vis spectra, allowed to reconstruct molecular structures of examined colorants. Due to the lack of standards, the identification of the dyes was based only on the registration of fragment and quasi‐molecular ions, what is rather uncommon in such analysis and means groping for the correct structure rather than proving signal identity by comparison with standards. Depending on substituents present in dye molecules, the lost fragments of the examined compounds involved SO₂, NO^?, NO₂^?, CH₄, C₂H₄, C₂H₅^?, C₂H₆, CH₂ = N–CH₃, (CH₃)₂NH, CH₂ = NH, CH₃–NH₂, as well as CO and CO₂. The performed study led to identification of various colorants: rhodamine 6 G, rhodamine B, malachite green, quinoline yellow, picric acid and acetoquinone yellow 5JZ. Copyright © 2013 John Wiley & Sons, Ltd.     

Quantitative assessment of rhodamine spectra

With the development of single-molecule detection and super-resolution fluorescence imaging, rhodamine dyes gain new life. Through the modification of the N-substituents and the replacement of the oxygen atom in xanthene, the wavelength and brightness can be effectively changed. However, the spectra of rhodamine, especially due to the balance between ring-closed non-fluorescent lactone and ring-opened fluorescent zwitterion/cation, are sensitive to interference from various environmental factors. In this way, the spectral data of various rhodamines reported by different research groups under different test conditions lacked comparability, sometimes even lacked accuracy. In order to meet the requirements for the accuracy and uniformity of spectral data in the research of single molecule imaging and dye structure-fluorescence relationship study, we have tested the spectra of fifteen rhodamine dyes that cover the visible and near-infrared regions under exactly the same conditions. By studying the dependence of the spectra on dye concentrations, it was confirmed that 1 μmol/L was ideal for detection less from the interference of dye molecule aggregation. We provide comprehensive and reliable spectral data of these fifteen dyes, which are expected to be used as references for future research. And the direct comparison of different rhodamine spectra would help to understand the structure-fluorescence relationship of rhodamines.     

Organic Crystals with Near‐Infrared Amplified Spontaneous Emissions Based on 2′‐Hydroxychalcone Derivatives: Subtle Structure Modification but Great Property Change

A series of highly efficient deep red to near‐infrared (NIR) emissive organic crystals 1 – 3 based on the structurally simple 2′‐hydroxychalcone derivatives were synthesized through a simple one‐step condensation reaction. Crystal 1 displays the highest quantum yield (Φ_f) of 0.32 among the reported organic single crystals with an emission maximum (λ_em) over 710 nm. Comparison between the bright emissive crystals 1 – 3 and the nearly nonluminous compounds 4 – 7 clearly gives evidence that a subtle structure modification can arouse great property changes, which is instructive in designing new high‐efficiency organic luminescent materials. Notably, crystals 1 – 3 exhibit amplified spontaneous emissions (ASE) with extremely low thresholds. Thus, organic deep red to NIR emissive crystals with very high Φ_f have been obtained and are found to display the first example of NIR fluorescent crystal ASE.     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

Heteroatom-substituted rhodamine dyes: Structure and spectroscopic properties

Rhodamine is one class of most popular dyes used in fluorescence imaging due to the outstanding photoproperties including high brightness and photostability. In recent years, replacement the xanthene oxygen with other elements, especially silicon, has attracted great attentions in the development of new rhodamine derivatives. This review summarized the structures and photophysical properties of heteroatom-substituted rhodamines. We hope this review can help to understand the structure-property relationships of rhodamine dyes and then elucidate the way to create derivatives with improved photoproperties.     

Hydrophilicity Control of Visible‐Light Hydrogen Evolution and Dynamics of the Charge‐Separated State in Dye/TiO2/Pt Hybrid Systems

Visible‐light‐driven H₂ evolution based on Dye/TiO₂/Pt hybrid photocatalysts was investigated for a series of (E)‐3‐(5′‐{4‐[bis(4‐R¹‐phenyl)amino]phenyl}‐4,4′‐(R²)₂‐2,2′‐bithiophen‐5‐yl)‐2‐cyanoacrylic acid dyes. Efficiencies of hydrogen evolution from aqueous suspensions in the presence of ethylenediaminetetraacetic acid as electron donor under illumination at λ>420 nm were found to considerably depend on the hydrophilic character of R¹, varying in the order MOD (R¹=CH₃OCH₂, R²=H)≈ MO4D (R¹=R²=CH₃OCH₂)> HD (R¹=R²=H)> PD (R¹=C₃H₇, R²=H). In the case of MOD /TiO₂/Pt, the apparent quantum yield for photocatalyzed H₂ generation at 436 nm was 0.27±0.03. Transient absorption measurements for MOD ‐ or PD ‐grafted transparent films of TiO₂ nanoparticles dipped into water at pH 3 commonly revealed ultrafast formation (<100 fs) of the dye radical cation (Dye^.+) followed by multicomponent decays, which involve minor fast decays (<5 ps) almost independent of R¹ and major slower decays with significant differences between the two samples: 1) the early decay of the major components for MOD is about 2.5 times slower than that for PD and 2) a redshift of the spectrum occurred for MOD with a time constant of 17 ps, but not for PD . The substituent effects on H₂ generation as well as on transient behavior have been discussed in terms substituent‐dependent charge recombination (CR) of Dye^.+ with electrons in bulk, inner‐trap, and/or interstitial‐trap states, arising from different solvent reorganization.