Highly Reproducible Surface‐Enhanced Raman Spectra on Semiconductor SnO2 Octahedral Nanoparticles

Highly reproducible surface‐enhanced Raman scattering (SERS) spectra are obtained on the surface of SnO₂ octahedral nanoparticles. The spot‐to‐spot SERS signals show a relative standard deviation (RSD) consistently below 20 % in the intensity of the main Raman peaks of 4‐mercaptobenzoic acid (4‐MBA) and 4‐nitrobenzenethiol (4‐NBT), indicating good spatial uniformity and reproducibility. The SERS signals are believed to mainly originate from a charge‐transfer (CT) mechanism. Time‐dependent density functional theory (TD‐DFT) is used to simulate the SERS spectrum and interpret the chemical enhancement mechanism in the experiment. The research extends the application of SERS and also establishes a new uniform SERS substrate.     

Fabrication and Formation Mechanism of Ag Nanoplate‐Decorated Nanofiber Mats and Their Application in SERS

We report a new simple method to fabricate a highly active SERS substrate consisting of poly‐m‐phenylenediamine/polyacrylonitrile (PmPD/PAN) decorated with Ag nanoplates. The formation mechanism of Ag nanoplates is investigated. The synthetic process of the Ag nanoplate‐decorated PmPD/PAN (Ag nanoplates@PmPD/PAN) nanofiber mats consists of the assembly of Ag nanoparticles on the surface of PmPD/PAN nanofibers as crystal nuclei followed by in situ growth of Ag nanoparticles exclusively into nanoplates. Both the reducibility of the polymer and the concentration of AgNO₃ are found to play important roles in the formation and the density of Ag nanoplates. The optimized Ag nanoplates@PmPD/PAN nanofiber mats exhibit excellent activity and reproducibility in surface‐enhanced Raman scattering (SERS) detection of 4‐mercaptobenzoic acid (4‐MBA) with a detection limit of 10^?10 m , making the Ag nanoplates@PmPD/PAN nanofiber mats a promising substrate for SERS detection of chemical molecules. In addition, this work also provides a design and fabrication process for a 3D SERS substrate made of a reducible polymer with noble metals.     

Effect of TiO2 on Altering Direction of Interfacial Charge Transfer in a TiO2‐Ag‐MPY‐FePc System by SERS

Interfacial charge transfer (CT) is of interest owing to its effect on the performance of molecular photovoltaic (PV) devices. The characteristics and structures of interfacial materials, such as TiO₂ nanoparticles (NPs) in some solar cells, are employed to adjust the CT process. In this study, three kinds of interfacial systems, including a solar cell‐like TiO₂‐Ag‐ p‐mercaptopyridine (MPY)‐ iron phthalocyanine (FePc) system, are compared to investigate the interfacial CT process using surface‐enhanced Raman scattering (SERS) spectroscopy. The SERS results show the significance of TiO₂ NPs in the system on altering the direction and path of the interfacial CT, which is closely associated with the CT enhancement contribution to SERS in such an interfacial system. SERS spectroscopy is expected to be a promising technique for the exploration and estimation of the interfacial CT behavior in PV devices, which may further extend the applications of SERS in the field of solar cells.     

Porosity‐Controlled Eggshell Membrane as 3D SERS‐Active Substrate

We report on the fabrication of a surface‐enhanced Raman scattering (SERS) platform, comprised of a three‐dimensional (3D) porous eggshell membrane (ESM) scaffold decorated with Ag nanoparticles (NPs). Both native and treated ESM were used, where the treated ESM pore size and fiber crossing density was controlled by timed exposure to hydrogen peroxide (H₂O₂). Ag NPs were synthesized in situ by reduction of silver nitrate with ascorbic acid. Our results demonstrate that H₂O₂‐treated Ag‐ESM provides a more densely packed 3D network of active material, which leads to consistently higher SERS enhancement than untreated Ag‐ESM substrates.     

Excitation‐wavelength‐dependent charge transfer resonance of bipyridines on silver nanoparticles: surface‐enhanced Raman scattering study

Charge transfer (CT) resonance mechanisms of 2,2′‐bipyridine (2,2′‐BiPy), 2,4′‐bipyridine (2,4′‐BiPy), and 4,4′‐bipyridine (4,4′‐BiPy) on silver nanoparticle surfaces have been comparatively investigated by means of surface‐enhanced Raman scattering (SERS) at the excitation wavelengths of 457, 514, 633, and 785 nm. A combination of the electromagnetic (EM) and charge transfer (CT) contributions should affect the SERS intensities for the bipyridine compounds adsorbed on silver nanoparticle surfaces. The CT resonance is assumed to occur in dissimilar ways for the bipyridine compounds, as evidenced from their different excitation‐wavelength‐dependent SERS enhancement factors. Ab initio density functional theory (DFT) calculations at the level of B3LYP/LANL2DZ have been carried out for the bipyridine‐Ag complexes. Copyright © 2007 John Wiley & Sons, Ltd.     

Chiral Carbonaceous Nanotubes Modified with Titania Nanocrystals: Plasmon‐Free and Recyclable SERS Sensitivity

Chiral carbonaceous nanotubes (CNT) were successfully used in plasmon‐free surface‐enhanced Raman scattering (SERS) for the first time. Further modification of TiO₂ nanocrystals on the chiral CNTs successfully realized the recycling of SERS substrate as chiral CNT/TiO₂ hybrids. The high SERS sensitivity of methylene blue (MB) over the chiral CNT/TiO₂ hybrids is ascribed to the laser‐driven birefringence induced by the helical structure, which provides much more opportunities for the occurrence of Raman scattering. The TiO₂ nanocrystals highly dispersed on the surface and inside the hollow cavity of chiral CNTs can completely degrade the MB under the solar light irradiation, leading to the self‐cleaning of SERS substrate. The present research opens a new way for the application of chiral inorganic materials in plasmon‐free SERS detection.     

A DFT Investigation of Surface‐Enhanced Raman Scattering of Adenine and 2′‐Deoxyadenosine 5′‐Monophosphate on Ag20 Nanoclusters

We present a detailed analysis of the surface‐enhanced Raman scattering (SERS) of adenine and 2′‐deoxyadenosine 5′‐monophosphate (dAMP) adsorbed on an Ag₂₀ cluster by using density functional theory. Calculated Raman spectra show that spectral features of all complexes depend greatly on adsorption sites of adenine and dAMP. The complexes consisting of adenine adsorbed on the Ag₂₀ cluster through N3 reproduce the measured SERS spectra in silver colloids, and thus demonstrated that adenine interacts with the silver surface via N3. We also investigate the SERS spectrum of adenine at the junction between two Ag₂₀ clusters and demonstrate that adenine can bind to the clusters through N3 and the external amino group, while dAMP can be adsorbed on the cluster in an end‐on orientation with the ribose and phosphate groups near to or away from the silver cluster. In contrast to the adenine–Ag₂₀ complexes, the dAMP–Ag₂₀ complexes produce new and strong bands in the low‐ or high‐wavenumber region of the Raman spectra, due to vibrations of the ribose and phosphate groups. Furthermore, the spectrum of dAMP bound to the Ag₂₀ cluster via N7 approaches the experimental SERS spectra on silver colloids.     

Visible‐light‐driven self‐cleaning SERS substrate of silver nanoparticles and graphene oxide decorated nitrogen‐doped titania nanotube array

Graphene oxide (GO) and silver nanoparticles (Ag NPs) sequentially decorated nitrogen‐doped titania nanotube array (N‐TiO₂ NTA) had been designed as visible‐light‐driven self‐cleaning surface‐enhanced Raman scattering (SERS) substrate for a recyclable SERS detection application. N‐TiO₂ NTA was fabricated by anodic oxidation and then doping nitrogen treatment in ammonia atmosphere, acting as a visible‐light‐driven photocatalyst and supporting substrate. Ag/GO/N‐TiO₂ NTA was prepared by decorating GO monolayer through an impregnation process and then depositing Ag NPs through a polyol process on the surface of N‐TiO₂ NTA, acting as the collection of organic molecule and Raman enhancement. The SERS activity of Ag/GO/N‐TiO₂ NTA was evaluated using methyl blue as an organic probe molecule, revealing the analytical enhancement factor of 4.54 × 10⁴. Ag/GO/N‐TiO₂ NTA was applied as active SERS substrate to determine a low‐affinity organic pollutant of bisphenol A, revealing the detection limit of as low as 5 × 10^?7 m . Ag/GO/N‐TiO₂ NTA could also achieve self‐cleaning function for a recycling utilization through visible‐light‐driven photocatalytic degradation of the adsorbed organic molecules. Ag/GO/N‐TiO₂ NTA has been successfully reused for five times without an obvious decay in accuracy and sensitivity for organic molecule detection. The unique properties of this SERS substrate enable it to have a promising application for the sensitive and recyclable SERS detection of low‐affinity organic molecules. Copyright © 2016 John Wiley & Sons, Ltd.     

ZnGa2O4 Nanorod Arrays Decorated with Ag Nanoparticles as Surface‐Enhanced Raman‐Scattering Substrates for Melamine Detection

The availability of sensitive, reproducible, and stable substrates is critically important for surface‐enhanced Raman spectroscopy (SERS)‐based applications, but it presently remains a challenge. In this work, well‐aligned zinc gallate (ZnGa₂O₄) nanorod arrays grown on a Si substrate by chemical vapor deposition were used as templates to fabricate SERS substrates by deposition of Ag nanoparticles onto the ZnGa₂O₄ nanorod surfaces. The coverage of the Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces was easily controlled by varying the amount of AgNO₃. SERS measurements showed that the number density of Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces had a great effect on SERS activity. The SERS signals collected by point‐to‐point and SERS mapping images showed that as‐prepared SERS substrates exhibited good spatial uniformity and reproducibility. Detection of melamine molecules at low concentrations (1.0×10^?7 M ) was used as an example to show the possible application of such a substrate. In addition, the effect of benzoic acid on the detection of melamine was also investigated. It was found that the SERS signal intensity of melamine decreased greatly as the concentration of benzoic acid was increased.     

Monitoring of Endogenous Hydrogen Sulfide in Living Cells Using Surface‐Enhanced Raman Scattering

Hydrogen sulfide (H₂S) has emerged as an important gasotransmitter in diverse physiological processes, although many aspects of its roles remain unclear, partly owing to a lack of robust analytical methods. Herein we report a novel surface‐enhanced Raman scattering (SERS) nanosensor, 4‐acetamidobenzenesulfonyl azide‐functionalized gold nanoparticles (AuNPs/4‐AA), for detecting the endogenous H₂S in living cells. The detection is accomplished with SERS spectrum changes of AuNPs/4‐AA resulting from the reaction of H₂S with 4‐AA on AuNPs. The SERS nanosensor exhibits high selectivity toward H₂S. Furthermore, AuNPs/4‐AA responds to H₂S within 1 min with a 0.1 μM level of sensitivity. In particular, our SERS method can be utilized to monitor the endogenous H₂S generated in living glioma cells, demonstrating its great promise in studies of pathophysiological pathways involving H₂S.     

Enantiomeric Discrimination by Surface‐Enhanced Raman Scattering–Chiral Anisotropy of Chiral Nanostructured Gold Films

A surface‐enhanced Raman scattering‐chiral anisotropy (SERS‐ChA) effect is reported that combines chiral discrimination and surface Raman scattering enhancement on chiral nanostructured Au films (CNAFs) equipped in the normal Raman scattering Spectrometer. The CNAFs provided remarkably higher enhancement factors of Raman scattering (EFs) for particular enantiomers, and the SERS intensity was proportional to the enantiomeric excesses (ee) values. Except for molecules with mesomeric species, all of the tested enantiomers exhibited high SERS‐ChA asymmetry factors (g), ranging between 1.34 and 1.99 regardless of polarities, sizes, chromophores, concentrations and ee. The effect might be attributed to selective resonance coupling between the induced electric and magnetic dipoles associated with enantiomers and chiral plasmonic modes of CNAFs.     

Plasmonic Hotspots in Air: An Omnidirectional Three‐Dimensional Platform for Stand‐Off In‐Air SERS Sensing of Airborne Species

Molecular‐level airborne sensing is critical for early prevention of disasters, diseases, and terrorism. Currently, most 2D surface‐enhanced Raman spectroscopy (SERS) substrates used for air sensing have only one functional surface and exhibit poor SERS‐active depth. “Aerosolized plasmonic colloidosomes” (APCs) are introduced as airborne plasmonic hotspots for direct in‐air SERS measurements. APCs function as a macroscale 3D and omnidirectional plasmonic cloud that receives laser irradiation and emits signals in all directions. Importantly, it brings about an effective plasmonic hotspot in a length scale of approximately 2.3 cm, which affords 100‐fold higher tolerance to laser misalignment along the z‐axis compared with 2D SERS substrates. APCs exhibit an extraordinary omnidirectional property and demonstrate consistent SERS performance that is independent of the laser and analyte introductory pathway. Furthermore, the first in‐air SERS detection is demonstrated in stand‐off conditions at a distance of 200 cm, highlighting the applicability of 3D omnidirectional plasmonic clouds for remote airborne sensing in threatening or inaccessible areas.     

Frequency Shift in Graphene‐Enhanced Raman Signal of Molecules

Graphene‐enhanced Raman scattering (GERS) is emerging as an important method due to the need for highly reproducible, quantifiable, and biocompatible active substrates. As a result of its unique two‐dimensional carbon structure, graphene provides particularly large enhanced Raman signals for molecules adsorbed on its surface. In this work, the GERS signals of a test molecule, 4‐mercaptobenzoic acid (4‐MBA), with reproducible enhancement factors are discussed and compared with surface‐enhanced Raman scattering (SERS) signals from highly active substrates, covered with spherical silver nanoparticles. It is shown that chemical interactions between the molecule and graphene can result in a frequency shift in the graphene‐enhanced Raman signal of the molecule.     

Biocompatible Triplex Ag@SiO2@mTiO2 Core–Shell Nanoparticles for Simultaneous Fluorescence‐SERS Bimodal Imaging and Drug Delivery

Herein, we report the synthesis of biocompatible triplex Ag@SiO₂@mTiO₂ core–shell nanoparticles (NPs) for simultaneous fluorescence‐surface‐enhanced Raman scattering (F‐SERS) bimodal imaging and drug delivery. Stable Raman signals were created by typical SERS tags that were composed of Ag NPs for optical enhancement, a reporter molecule of 4‐mercaptopyridine (4‐Mpy) for a spectroscopic signature, and a silica shell for protection. A further coating of mesoporous titania (mTiO₂) on the SERS tags offered high loading capacity for a fluorescence dye (flavin mononucleotide) and an anti‐cancer drug (doxorubicin (DOX)), thereby endowing the material with fluorescence‐imaging and therapeutic functions. The as‐prepared F‐SERS dots exhibited strong fluorescence when excited by light at 460 nm whilst a stable, characteristic 4‐Mpy SERS signal was detected when the excitation wavelength was changed to longer wavelength (632.8 nm), both in solution and after incorporation inside living cells. Their excellent biocompatibility was demonstrated by low cytotoxicity against MCF‐7 cells, even at a high concentration of 100 μg mL^?1. In vitro cell cytotoxicity confirmed that DOX‐loaded F‐SERS dots had a comparable or even greater therapeutic effect compared with the free drug, owing to the increased cell‐uptake, which was attributed to the possible endocytosis mechanism of the NPs. To the best of our knowledge, this is the first proof‐of‐concept investigation on a multifunctional nanomedicine that possessed a combined capacity for fast and multiplexed F‐SERS labeling as well as drug‐loading for cancer therapy.     

Electrodeposition of dendritic gold/silver nanaoparticles on disposable screen‐printed carbon electrode and its application of 4‐mercaptopyridine in in situ electrochemical surface‐enhanced Raman scattering

Column electrodes pretreated through oxidation–reduction cycles were traditionally used in electrochemical surface‐enhanced Raman scattering (SERS). In this study, a disposable screen‐printed carbon electrode was introduced into in situ electrochemical SERS through the electrodeposition of dendritic gold/silver nanoparticles (Au/AgNPs) onto the surface of the carbon working electrode to induce the SERS enhancement effect on the electrode. Scanning electron microscopy images showed that dendritic Au/AgNPs nanostructures could be fabricated under appropriate electrodeposition conditions and could present a minimum SERS factor of 4.25 × 10⁵. Furthermore, the absorbed behavior of 4‐mercaptopyridine was investigated under different potentials. The adsorption configuration was inferred to transform from ‘vertical’ to ‘lying‐flat’. The proposed new electrode combined with a portable Raman spectrometer could be useful in the identifying products or intermediates during electrochemical synthesis or electrochemical catalysis in in situ electrochemical SERS. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterization of self‐assembled phenyl and benzyl isothiocyanate thin films on Au surfaces

Structures of self‐assembled monolayers (SAMs) prepared from benzyl isothiocyanate (BZIT) and phenyl isothiocyanate (PHIT) were comparatively investigated by means of surface enhanced Raman scattering (SERS) on gold nanoparticle surfaces. Both the molecules are assumed to have upright geometries binding via the sulfur atom, from the SERS spectral features. The broad and split bands at ～2100 cm^?1 could be ascribed to the combination band ν_9a + ν₁₂ of the phenyl ring vibrations through a Fermi‐resonance interaction with the ν₃(NCS) band in the neat‐liquid state. Such broad bands became quite symmetric upon adsorption on Au. UV‐vis absorbance spectroscopy and cyclic voltammetry (CV) were used to compare the kinetics of the formation of SAMs on gold. Our results suggest that BZIT should have a relatively faster self‐assembly than PHIT, as indicated from signal decrease in the CV graph, which suggests a more vertical stance for BZIT in line with Raman measurements. Copyright © 2006 John Wiley & Sons, Ltd.     

Photocatalytically Powered Matchlike Nanomotor for Light‐Guided Active SERS Sensing

Surface enhanced Raman spectroscopy (SERS) is a powerful optical sensing technique that can detect analytes of extremely low concentrations. However, the presence of enough SERS probes in the detection area and a close contact between analytes and SERS probes are critical for efficient acquisition of a SERS signal. Presented here is a light‐powered micro/nanomotor (MNM) that can serve as an active SERS probe. The matchlike AgNW@SiO₂ core–shell structure of the nanomotors work as SERS probes based on the shell‐isolated enhanced Raman mechanism. The AgCl tail serves as photocatalytic nanoengine, providing a self‐propulsion force by light‐induced self‐diffusiophoresis. The phototactic behavior was utilized to achieve enrichment of the nanomotor‐based SERS probes for on‐demand biochemical sensing. The results demonstrate the possibility of using photocatalytic nanomotors as active SERS probes for remote, light‐controlled, and smart biochemical sensing on the micro/nanoscale.     

Doping and metallic‐support effect evidenced on SERS spectra of polyaniline thin films

Surface‐enhanced Raman scattering (SERS) is a process with origins, electromagnetic and chemical. The electromagnetic enhancement consists of the excitation of surface plasmons in the metallic support of the thin film. With only the electromagnetic enhancement mechanism, the surface spectra should not differ from volume Raman spectra. However, between SERS and volume Raman spectra, there are differences resulting from the chemical reactions taking place at the polymer/metal interface, intermediated by solvent molecules, that finally depend on the types of polymers and metallic supports. Polyaniline (PAN) is an excellent material to emphasize the chemical component of SERS. This is due to its particular structure with a repeating unit that contains two entities at different weights—a reduced state and an oxidized state–that, in turn, react differently with a metallic substrate. SERS spectra depend on the oxidizing properties of the metal surface, which involves an intermediate compound of the types Ag₂O and Au₂O₃ when N‐methyl‐2‐pyrrolidinone is used as the solvent. This article presents new results concerning the surface chemical effects that produce variations of the PAN SERS spectra. The SERS spectra of the PAN emeraldine base (PAN‐EB) layered on Au support are characterized by a semiquinoid structure that we believe is induced on the intermediate compound Au₂O₃. In the presence of H₂SO₄, the SERS spectra change gradually as the degree of acid protonation doping increases. The SERS spectra of the fully protonated PAN‐EB are identical to those obtained on PAN emeraldine salt (PAN‐ES) synthesized by cyclic voltammetry in an acid medium and are invariable with the type of metallic support. The SERS spectra show that the emeraldine salt can be partially or totally deprotonated with water or NH₄OH. The deprotonation is complete for the Ag support and partial for the Au support. The SERS spectra of the fully protonated PAN‐EB are characterized by a double band with maxima at about 1330 and 1370 cm⁻¹. Although the generation process of positive charge on the macromolecular chain of PAN‐EB doped in the presence of (C₄H₉)₄NBF₄ is similar to that due to protonic acid doping, involving cation addition (C₄H or H⁺ ions, respectively) in SERS spectra, the complex band situated at about 1330–1370 cm⁻¹ no longer appears. The doping of PAN‐EB with FeCl₃ produces two polymer forms: a salt type characterized by a protonated structure similar to that found for PAN‐ES and a base type similar to the leucoemeraldine form. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2599–2609, 2000     

High‐Quality Covalently Grafting Hemoglobin on Gold Electrodes: Characterization,Redox Thermodynamics and Bio‐electrocatalysis

Herein, we report a versatile surface chemistry methodology to covalently immobilize ligands and proteins to self‐assembled monolayers (SAMs) on gold electrode. The strategy is based on two steps: 1) the coupling of soluble azido‐PEG‐amimo ligand with an alkynyl‐terminated monolayer via click reaction and 2) covalent immobilization hemoglobin (Hb) to the amine‐terminated ligand via carbodiimide reaction. Surface‐enhanced Raman scattering spectroscopy (SERS), atomic force microscopy (AFM), reflection absorption infrared spectroscopy (RAIR) and cyclic voltammetry are used to characterize the model interfacial reactions. We also demonstrate the excellent biocompatibility of the interface for Hb immobilization and reliable application of the proposed method for H₂O₂ biosensing. Moreover, the redox thermodynamics of the Fe³⁺/Fe²⁺ couple in Hb is also investigated.     

Enhancement mechanism of SERS from cyanine dyes adsorbed on Ag2O colloids

Surface enhancement mechanism of Raman scattering from molecules adsorbed on silver oxide colloids is reported. Absorption spectra and Raman spectra of the cyanine dye D266 and pyridine molecules adsorbed on Ag₂O colloids, and the influences of S₂O₃²⁻ and OH⁻ on the SERS are studied respectively. The results indicate that ‘chemical' enhancement is dominant in Ag₂O colloidal solution. Surface complexes of adsorbed molecules and small silver ion clusters Ag_n⁺ as the SERS active sites make an important contribution to surface enhanced Raman scattering (SERS). At these active sites, charge transfer between the adsorbed molecules and the small silver ion clusters is the main enhancement origin. The enhancement factor of D266 adsorbed on Ag₂O colloids is theoretically estimated with the excited-state charge transfer model, which is roughly in accordance with the experiments.