Pyridine‐Enhanced Head‐to‐Tail Dimerization of Terminal Alkynes by a Rhodium–N‐Heterocyclic‐Carbene Catalyst

A general regioselective rhodium‐catalyzed head‐to‐tail dimerization of terminal alkynes is presented. The presence of a pyridine ligand (py) in a Rh–N‐heterocyclic‐carbene (NHC) catalytic system not only dramatically switches the chemoselectivity from alkyne cyclotrimerization to dimerization but also enhances the catalytic activity. Several intermediates have been detected in the catalytic process, including the π‐alkyne‐coordinated Rh^I species [RhCl(NHC)(η²‐HC?CCH₂Ph)(py)] ( 3 ) and [RhCl(NHC){η²‐C(tBu)?C(E)CH?CHtBu}(py)] ( 4 ) and the Rh^III–hydride–alkynyl species [RhClH{? C?CSi(Me)₃}(IPr)(py)₂] ( 5 ). Computational DFT studies reveal an operational mechanism consisting of sequential alkyne C? H oxidative addition, alkyne insertion, and reductive elimination. A 2,1‐hydrometalation of the alkyne is the more favorable pathway in accordance with a head‐to‐tail selectivity.     

Exploring Bis(cyclometalated) Ruthenium(II) Complexes as Active Catalyst Precursors: Room‐Temperature Alkene–Alkyne Coupling for 1,3‐Diene Synthesis

Described is the development of a new class of bis(cyclometalated) ruthenium(II) catalyst precursors for C? C coupling reactions between alkene and alkyne substrates. The complex [(cod)Ru(3‐methallyl)₂] reacts with benzophenone imine or benzophenone in a 1:2 ratio to form bis(cyclometalated) ruthenium(II) complexes ( 1 ). The imine‐ligated complex 1 a promoted room‐temperature coupling between acrylic esters and amides with internal alkynes to form 1,3‐diene products. A proposed catalytic cycle involves C? C bond formation by oxidative cyclization, β‐hydride elimination, and C? H bond reductive elimination. This Ru^II/Ru^IV pathway is consistent with the observed catalytic reactivity of 1 a for mild tail‐to‐tail methyl acrylate dimerization and for cyclobutene formation by [2+2] norbornene/alkyne cycloaddition.     

A Metal‐Containing N‐Heterocyclic Germylene Based on an Oxalamidine Framework

A metal‐containing N‐heterocyclic germylene based on a N‐mesityl (Mes)‐substituted oxalamidine framework is reported. The precursor (MesN=)₂C–C(–N(H)Mes)₂ ( 1 H₂) was converted into its rhodium complex [Rh(κ²N‐ 1 H₂)(cod)][OTf] ( 2 ) (cod = 1,5‐cyclooctadiene; OTf = triflate) in 62 % isolated yield. Subsequent reaction of 2 with Ge{N(SiMe₃)₂}₂ gave the crystalline N‐heterocyclic germylene [Rh(cod)(μ‐ 1 )Ge][OTf] ( 3 ) in 50 % yield. The compounds under study were fully characterized by various methods, also including X‐ray crystallographic studies on single crystals of 2 and 3 . Density functional theory (DFT) calculations revealed that π conjugation in the bridging oxalamidine framework is increased and n(N)–p(Ge) π bonding is decreased upon κ²N metal coordination; a further weakening of the Ge–N bond occurs through triflate coordination to the Ge^II atom. Nevertheless, preliminary coordination studies revealed that 3 behaves as 2‐electron (L ‐type) germylene donor ligand. Treatment of 3 with [Ir(cod)Cl]₂ furnished the heterobimetallic complex [Rh(cod)(μ‐ 1 )Ge‐Ir(cod)Cl][OTf] ( 4 ), as evidenced by NMR spectroscopic investigations and DFT calculations.     

Ligand‐Centred Reactivity of Bis(picolyl)amine Iridium: Sequential Deprotonation,Oxidation and Oxygenation of a “Non‐Innocent” Ligand

Treatment of [Ir(bpa)(cod)]⁺ complex [ 1 ]⁺ with a strong base (e.g., tBuO^?) led to unexpected double deprotonation to form the anionic [Ir(bpa?2H)(cod)]^? species [ 3 ]^?, via the mono‐deprotonated neutral amido complex [Ir(bpa?H)(cod)] as an isolable intermediate. A certain degree of aromaticity of the obtained metal–chelate ring may explain the favourable double deprotonation. The rhodium analogue [ 4 ]^? was prepared in situ. The new species [M(bpa?2H)(cod)]^? (M=Rh, Ir) are best described as two‐electron reduced analogues of the cationic imine complexes [M^I(cod)(Py‐CH₂‐N?CH‐Py)]⁺. One‐electron oxidation of [ 3 ]^? and [ 4 ]^? produced the ligand radical complexes [ 3 ]^. and [ 4 ]^.. Oxygenation of [ 3 ]^? with O₂ gave the neutral carboxamido complex [Ir(cod)(py‐CH₂‐N‐CO‐py)] via the ligand radical complex [ 3 ]^. as a detectable intermediate.     

Platin(0)‐Komplexe mit amino‐substituierten Alkinen: Neue Metallorganische Bausteine für supramolekulare Architekturen und „Kristall‐Engineering”︁

Platinum(0) Complexes with Amino‐Substituted Alkynes: Novel Organometallic Building Blocks for Supramolecular Architectures and “Crystal Engineering” Homoleptic Bis(alkyne)platinum(0) compounds containing either NH₂‐ or NH₂‐/OH‐substituents are formed by reaction of Pt(cod)₂ with alkynes as stable compounds. They can be used as variable building blocks for supramolecular networks. The crystal structure analyses of Bis(2‐amino‐2,5dimethyl‐5‐hydroxy‐hex‐3‐yne)platinum(0) ( 1 ) and of Bis(1(3‐amino‐3‐methyl‐but‐1‐inyl)‐cyclohexane‐1‐ol)platinum(0) ( 2 ) exhibit that the low‐valent Pt atom is tetrahedrally surrounded by the four sp‐hybridizated carbonatoms of the alkynes. Despite the fact that the bond lengths and ‐angles of the PtC₄ units are equal, the supramolecular structures are different. While in 1 polymer strands are formed in which the bis(alkyne)‐Pt⁰ units are connected by (OH)₂(NH₂)₂‐ tetrahedrons, 2 yields only a dimer containing a network of four OH‐ and two NH₂‐groups. Platinum(0) complexes with cationic alkynes bearing ammonium substituents can be isolated as thermal stable compounds. The X‐ray structures of [Cl( FH ⁺)Pt(cod)]₄ ( 8 ) reveals that four molecular units form a cube with both four NH₃⁺ groups and Cl^– at the corners connected by hydrogen bridges. In the bis(alkyne)Pt⁰ complex [Cl_1.5( FH ⁺)_1.5( F )_0.5Pt] ( 9 ) only 1,33 of two NH₂ groups are protonated and a hydrogen bridged network connects four bis(alkyne)Pt⁰ units (cod: cycloocta‐1.5‐diene, F : 1‐(trimethylsilylethinyl)‐1‐amino‐cyclohexane).     

Zirconium complexes bearing bis(phenoxy‐imine) ligands with bulky o‐bis(aryl)methyl‐substituted aniline groups: synthesis,characterization and ethylene polymerization behavior

A series of bis(phenoxy‐imine) zirconium complexes bearing bulky o‐bis(aryl)methyl‐substituted aryl groups on the aniline moiety have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as a single chiral C₂‐symmetric isomer in the solution. X‐ray crystallographic analysis of the resulting biszwitterionic‐type adduct complex C1 · 2HCl reveals that the phenoxy‐imine groups function as a monodentate phenoxy ligand and the oxygen atoms are oriented trans to each other at the central metal atom. Using modified methylaluminoxane (MMAO) as co‐catalyst, C1 · 2HCl, C2–C6 exclusively produce linear aluminium‐terminated polyethylenes (Al‐PEs) with high activity (up to 16.89 × 10⁶ g PE (mol Zr h)^?1, suggesting that chain transfer to aluminum is the predominant termination mechanism. It is noteworthy that the introduction of an excessively bulky o‐bis(aryl)methyl substituent adjacent to the imine‐N produces low molecular‐weight Al‐PEs (M_v 1.6–10.1 × 10³) due to the enhanced rate of chain transfer to alkylaluminium groups during polymerization. Copyright © 2013 John Wiley & Sons, Ltd.     

An Alkyne‐Appended,Click‐Ready PtII Complex with an Unusual Arrangement in the Solid State

To better understand the range of cellular interactions of Pt^II‐based chemotherapeutics, robust and efficient methods to track and analyze Pt targets are needed. A powerful approach is to functionalize Pt^II compounds with alkyne or azide moieties for post‐treatment conjugation through the azide–alkyne cycloaddition (click) reaction. Herein, we report an alkyne‐appended cis‐diamine Pt^II compound, cis‐[Pt(2‐(5‐hexynyl)amido‐1,3‐propanediamine)Cl₂] ( 1 ), the X‐ray crystal structure of which exhibits a combination of unusual radially distributed CH/π(CC) interactions, Pt Pt bonding, and NH:O/NH:Cl hydrogen bonds. In solution, 1 exhibits no Pt alkyne interactions and binds readily to DNA. Subsequent click reactivity with nonfluorescent dansyl azide results in a 70‐fold fluorescence increase. This result demonstrates the potential for this new class of alkyne‐modified Pt compound for the comprehensive detection and isolation of Pt‐bound biomolecules.     

An Alkyne‐Appended,Click‐Ready PtII Complex with an Unusual Arrangement in the Solid State

To better understand the range of cellular interactions of Pt^II‐based chemotherapeutics, robust and efficient methods to track and analyze Pt targets are needed. A powerful approach is to functionalize Pt^II compounds with alkyne or azide moieties for post‐treatment conjugation through the azide–alkyne cycloaddition (click) reaction. Herein, we report an alkyne‐appended cis‐diamine Pt^II compound, cis‐[Pt(2‐(5‐hexynyl)amido‐1,3‐propanediamine)Cl₂] ( 1 ), the X‐ray crystal structure of which exhibits a combination of unusual radially distributed CH/π(C?C) interactions, Pt? Pt bonding, and NH:O/NH:Cl hydrogen bonds. In solution, 1 exhibits no Pt? alkyne interactions and binds readily to DNA. Subsequent click reactivity with nonfluorescent dansyl azide results in a 70‐fold fluorescence increase. This result demonstrates the potential for this new class of alkyne‐modified Pt compound for the comprehensive detection and isolation of Pt‐bound biomolecules.     

Synthesis and Reactivity of Six‐Membered Oxa‐Nickelacycles: A Ring‐Opening Reaction of Cyclopropyl Ketones

Cyclopropanecarboxaldehyde ( 1 a ), cyclopropyl methyl ketone ( 1 b ), and cyclopropyl phenyl ketone ( 1 c ) were reacted with [Ni(cod)₂] (cod=1,5‐cyclooctadiene) and PBu₃ at 100 °C to give η²‐enonenickel complexes ( 2 a – c ). In the presence of PCy₃ (Cy=cyclohexyl), 1 a and 1 b reacted with [Ni(cod)₂] to give the corresponding μ‐η²:η¹‐enonenickel complexes ( 3 a , 3 b ). However, the reaction of 1 c under the same reaction conditions gave a mixture of 3 c and cyclopentane derivatives ( 4 c , 4 c′ ), that is, a [3+2] cycloaddition product of 1 c with (E)‐1‐phenylbut‐2‐en‐1‐one, an isomer of 1 c . In the presence of a catalytic amount of [Ni(cod)₂] and PCy₃, [3+2] homo‐cycloaddition proceeded to give a mixture of 4 c (76 %) and 4 c′ (17 %). At room temperature, a possible intermediate, 6 c , was observed and isolated by reprecipitation at ?20 °C. In the presence of 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr), both 1 a and 1 c rapidly underwent oxidative addition to nickel(0) to give the corresponding six‐membered oxa‐nickelacycles ( 6 ai , 6 ci ). On the other hand, 1 b reacted with nickel(0) to give the corresponding μ‐η²:η¹‐enonenickel complex ( 3 bi ). The molecular structures of 6 ai and 6 ci were confirmed by X‐ray crystallography. The molecular structure of 6 ai shows a dimeric η¹‐nickelenolate structure. However, the molecular structure of 6 ci shows a monomeric η¹‐nickelenolate structure, and the nickel(II) 14‐electron center is regarded as having “an unusual T‐shaped planar” coordination geometry. The insertion of enones into monomeric η¹‐nickelenolate complexes 6 c and 6 ci occurred at room temperature to generate η³‐oxa‐allylnickel complexes ( 8 , 9 ), whereas insertion into dimeric η¹‐nickelenolate complex 6 ai did not take place. The diastereoselectivity of the insertion of an enone into 6 c having PCy₃ as a ligand differs from that into 6 ci having IPr as a ligand. In addition, the stereochemistry of η³‐oxa‐allylnickel complexes having IPr as a ligand is retained during reductive elimination to yield the corresponding [3+2] cycloaddition product, which is consistent with the diastereoselectivity observed in Ni⁰/IPr‐catalyzed [3+2] cycloaddition reactions of cyclopropyl ketones with enones. In contrast, reductive elimination from the η³‐oxa‐allylnickel having PCy₃ as a ligand proceeds with inversion of stereochemistry. This is probably due to rapid isomerization between syn and anti isomers prior to reductive elimination.     

Reaktionen von Pentafulven‐Komplexen des Titans mit Nitrilen und iso‐Nitrilen — Synthese und Isomerisierungen von σ, π‐Chelatkomplexen mit Cp∼N‐Liganden

Reactions of Pentafulvene Complexes of Titanium with Nitriles and iso‐Nitriles — Synthesis and Isomerizations of σ, π‐Chelat Complexes with Cp∼N‐Ligands The reactions of fulvene complexes Cp*Ti{η⁶—C₅H₄=C(R)(R')}Cl (R = H, R' = tBu ( 1 ); R = Me, R' = iPr ( 4 )) with nitriles and iso‐nitriles, leading to σ, π‐chelat complexes with Cp∼N‐ligands, have been examined and the formed products characterized. Whereas in the reactions of 1 and 4 , respectively, with nitriles a 1, 2‐mono‐insertion of the CN‐group in the Ti—C(R)(R') (Fv) bond is observed, the reaction with iso‐nitrils leads to the insertion of two molecules iso‐nitrile. The nitrile insertion product of 1 is characterized by an imine‐enamine tautomerization. Whereas the primary built meta stable imine species ( 3 ) was only identified by NMR measurements in solution, the enamine tautomer ( 2 ) crystallized from n‐hexane, so that the crystal structure could be determined. The primary formed iminoacyl complex ( 7 ) rearranges due to the electrophilicity of the titanium centre and builds a Ti—N bond with significant N(pπ) → Ti(dπ) bonding character.     

Ruthenium N‐heterocyclic–carbene catalyzed diarylation of arene C?H bond

Novel ruthenium‐1,3‐dialkylimidazolin‐2‐ylidene complexes ( 2a–e ) have been prepared and characterized by C, H, N analysis, ¹H‐NMR and ¹³C‐NMR. The ortho position of the aromatic ring of pyridyl group substituted aromatic compound was directly arylated with aryl bromides and chlorides in the presence of a catalytic amount of [RuCl₂(1,3‐dialkylimidazolin‐2‐ylidene)] complexes. Copyright © 2008 John Wiley & Sons, Ltd.     

Rhodium‐catalyzed ortho‐C‐H olefination of aromatic aldehydes employing transient directing strategy

A Rhodium(III)‐catalyzed ortho‐C‐H olefination of aromatic aldehydes in the presence of catalytic amount of TsNH₂ has been developed. The in situ generated imine intermediate from aldehyde and TsNH₂ worked as a transient directing group. Both electron‐rich and electron‐deficient aromatic aldehydes were tolerated, affording the corresponding products in moderate to good yields. Importantly, the present protocol provides a straightforward access to olefinated aromatic aldehydes with aldehydes as the simple starting materials.     

Thermal properties and flame retardancy of novel epoxy based on phosphorus‐modified Schiff‐base

Through addition reaction of Schiff‐base terephthalylidene‐bis‐(p‐aminophenol) ( DP‐1 ) and diethyl phosphite (DEP), a novel phosphorus‐modified epoxy, 4,4'‐diglycidyl‐(terephthalylidene‐bis‐(p‐aminophenol))diphosphonate ether ( EP‐2 ), was obtained. An modification reaction between EP‐2 and DP‐1 resulted in an epoxy compound, EP‐3 , possessing both phosphonate groups and C?N imine groups. The structure of EP‐2 was characterized by Fourier transform infrared (FTIR), elemental analysis (EA), ¹H, ¹³C, and ³¹P NMR analyses. The thermal properties of phosphorus‐modified epoxies cured with 4,4'‐diaminodiphenylmethane (MDA) and 4,4'‐diaminodiphenyl ether (DDE) were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The activation energies of dynamic thermal degradation (E_d) were calculated using Kissinger and Ozawa's methods. The thermal degradation mechanism was characterized using thermogravimetric analysis/infrared spectrometry (TG‐IR). In addition, the flame retardancy of phosphorus‐modified epoxy thermosets was evaluated using limiting oxygen index (LOI) and UL‐94 vertical test methods. Via an ingenious design, phosphonate groups were successfully introduced into the backbone of the epoxies; the flame retardancy of phosphorus‐modified epoxy thermosets was distinctly improved. Due to incorporation of C?N imine group, the phosphorus‐modified epoxy thermosets exhibited high thermal stabilities; the values of glass‐transition temperatures (T_gs) were about 201–210°C, the values of E_d were about 220–490 kJ/mol and char yields at 700°C were 49–53% in nitrogen and 45–50% in air. These results showed an improvement in the thermal properties of phosphorus‐modified epoxy by the incorporation of C?N imine groups. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel isolated,L‐amino acid‐ligated rhodium catalysts that induce highly helix‐sense‐selective polymerization of an achiral 3,4,5‐trisubstituted phenylacetylene

Two novel chiral well‐defined rhodium complexes, Rh(cod)(L‐Phe) (cod = 1,5‐cyclooctadiene, Phe = phenylalanine) and Rh(cod)(L‐Val) (Val = valine) were synthesized, isolated by recrystallization, and characterized. The helix‐sense‐selective polymerization (HSSP) of an achiral 3,4,5‐trisubstituted phenylacetylene, p‐dodecyloxy‐m,m‐dihydroxyphenylacetylene (DoDHPA) was examined by using the two Rh complexes as catalysts. These catalysts provided high molecular weight polymers (M_w 28 × 10⁴?45 × 10⁴) in about 40%–85% yields. The resulting polymers exhibited a bisignated CD signal at about 300 nm and a broad signal around 470 nm, indicating that they have preferential one‐handed helical structure. The present catalysts achieved larger molar ellipticity up to [θ]₃₁₀ = 13.0 × 10⁴ deg cm²/dmol than those with binary chiral catalytic systems, [Rh(cod)Cl]₂/(L‐phenylalaninol), [Rh(cod)Cl]₂/(L‐valinol), and [Rh(nbd)Cl]₂/(R)‐PEA. All these results manifest that the present, well‐defined Rh complexes serve as excellent catalysts for the HSSP of DoDHPA. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2346–2351     

Titanium and Zirconium Complexes with Non‐Salicylaldimine‐Type Imine–Phenoxy Chelate Ligands: Syntheses,Structures, and Ethylene‐Polymerization Behavior

New Ti and Zr complexes that bear imine–phenoxy chelate ligands, [{2,4‐di‐tBu‐6‐(RCH=N)‐C₆H₄O}₂MCl₂] ( 1 : M=Ti, R=Ph; 2 : M=Ti, R=C₆F₅; 3 : M=Zr, R=Ph; 4 : M=Zr, R=C₆F₅), were synthesized and investigated as precatalysts for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as mixtures of structural isomers. X‐ray crystallographic analysis of the adduct 1 ?HCl reveals that it exists as a zwitterionic complex in which H and Cl are situated in close proximity to one of the imine nitrogen atoms and the central metal, respectively. The X‐ray molecular structure also indicates that one imine phenoxy group with the syn C?N configuration functions as a bidentate ligand, whereas the other, of the anti C?N form, acts as a monodentate phenoxy ligand. Although Zr complexes 3 and 4 with methylaluminoxane (MAO) or [Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ displayed moderate activity, the Ti congeners 1 and 2 , in association with an appropriate activator, catalyzed ethylene polymerization with high efficiency. Upon activation with MAO at 25 °C, 2 displayed a very high activity of 19900 (kg PE) (mol Ti)^?1 h^?1, which is comparable to that for [Cp₂TiCl₂] and [Cp₂ZrCl₂], although increasing the polymerization temperature did result in a marked decrease in activity. Complex 2 contains a C₆F₅ group on the imine nitrogen atom and mediated nonliving‐type polymerization, unlike the corresponding salicylaldimine‐type complex. Conversely, with [Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ activation, 1 exhibited enhanced activity as the temperature was increased (25–75 °C) and maintained very high activity for 60 min at 75 °C (18740 (kg PE) (mol Ti)^?1 h^?1). ¹H NMR spectroscopic studies of the reaction suggest that this thermally robust catalyst system generates an amine–phenoxy complex as the catalytically active species. The combinations 1 /[Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ and 2 /MAO also worked as high‐activity catalysts for the copolymerization of ethylene and propylene.     

Nickel(0) Complexes with Fluorinated Alkyne Ligands and their Reactivity towards Semihydrogenation and Hydrodefluorination with Water

The current work describes the synthesis and full characterization of zerovalent nickel complexes of the type [(dippe)Ni(η²‐C,C‐F_n‐alkyne)] (dippe=1,2‐bis(di‐isopropylphosphino‐ethane), F_n‐alkyne=fluorinated aromatic alkyne, n=1, 3, 5; 3a , 3b , 3c ) and [{(dippe)Ni}₂(μ²‐C,C‐F_n‐alkyne)] ( 4 ). Reactions with complexes 3a , 3b , 3c , and water as the hydrogen source, yield selective semihydrogenation of the bound alkyne to the corresponding alkene, accompanied by partial hydrodefluorination of the aromatic ring. Different alkynes were tested; on using the alkyne with five fluorine atoms over the aromatic ring, partial defluorination was achieved under the mildest reaction conditions, followed in reactivity by the alkyne with three fluorine atoms. The alkyne with only one fluorine atom was barely defluorinated. The use of triethylsilane as a sacrificial hydride source resulted in an overall increase in reactivity towards defluorination.     

1‐(7‐Chloro‐1,4‐dihydroquinolin‐4‐ylidene)thiosemicarbazide and its hydrochloride: evidence for the existence of a stable imine tautomer in the solid state of 4‐aminoquinoline free bases,an anomalous case in nitrogen heterocycles

In the solid state, crystals of both 1‐(7‐chloro‐1,4‐dihydroquinolin‐4‐ylidene)thiosemicarbazide–methanol–water (2/1/1), 2C₁₀H₉ClN₄S·CH₃OH·H₂O, (I), and its hydrochloride salt {systematic name: [(7‐chloro‐1,4‐dihydroquinolin‐4‐ylidene)azaniumyl]thiourea chloride}, C₁₀H₁₀ClN₄S⁺·Cl⁻, (II), assume the imine tautomeric form, contrary to other 4‐amino‐7‐chloroquinolines. Of particular interest are the N—C bond lengths, which have appreciable double‐bond character, and the C—N—C aromatic ring bond angle. Both of these parameters have been studied extensively in 4‐amino‐substituted quinolines. The crystal structures of (I) and (II) in this study provide interesting examples of the amino–imino tautomerism which exists in this class of compound and is, to the best of our knowledge, hitherto unreported.     

Functional carbo‐Butadienes: Nonaromatic Conjugation Effects through a 14‐Carbon, 24‐π‐Electron Backbone

A systematic study of carbo‐butadiene motifs not embedded in an aromatic carbo‐benzene ring is described. Dibutatrienylacetylene (DBA) targets R¹?C(R)?C?C?C(Ph)?C≡C?C(Ph)?C?C?C(R)?R² are devised, in which R is C≡CSiiPr₃ and R¹ and R² are R, H, or 4‐X‐C₆H₄, with the latter including three known representatives (X: H, NMe₂, or NH₂). The synthesis method is based on the SnCl₂‐mediated reduction of pentaynediols prepared by early or late divergent strategies; the latter allows access to a OMe–NO₂ push–pull diaryl‐DBA. If R¹ and R² are H, an over‐reduced dialkynylbutatriene (DAB) with two allenyl caps was isolated instead of the unsubstituted DBA. If R¹=R²=R, the tetraalkynyl‐DBA target was obtained, along with an over‐reduced DBA product with a 12‐membered 1,2‐alkylidene‐1H₂,2H₂‐carbo‐cyclobutadiene ring. X‐ray crystallography shows that all of the acyclic DBAs adopt a planar trans–transoid–trans configuration. The maximum UV/Vis absorption wavelength is found to vary consistently with the overall π‐conjugation extent and, more intriguingly, with the π‐donor character of the aryl X substituents, which varies consistently with the first (reversible) reduction potential and first (irreversible) oxidation peak, as determined by voltammetry.     

A Mechanistic Study of the Utilization of arachno‐Diruthenaborane [(Cp*RuCO)2B2H6] as an Active Alkyne‐Cyclotrimerization Catalyst

The reaction of nido‐[1,2‐(Cp*RuH)₂B₃H₇] ( 1 a , Cp*=η⁵‐C₅Me₅) with [Mo(CO)₃(CH₃CN)₃] under mild conditions yields the new metallaborane arachno‐[(Cp*RuCO)₂B₂H₆] ( 2 ). Compound 2 catalyzes the cyclotrimerization of a variety of internal‐ and terminal alkynes to yield mixtures of 1,3,5‐ and 1,2,4‐substituted benzenes. The reactivities of nido‐ 1 a and arachno‐ 2 with alkynes demonstrates that a change in geometry from nido to arachno drives a change in the reaction from alkyne‐insertion to catalytic cyclotrimerization, respectively. Density functional calculations have been used to evaluate the reaction pathways of the cyclotrimerization of alkynes catalyzed by compound 2 . The reaction involves the formation of a ruthenacyclic intermediate and the subsequent alkyne‐insertion step is initiated by a [2+2] cycloaddition between this intermediate and an alkyne. The experimental and quantum‐chemical results also show that the stability of the metallacyclic intermediate is strongly dependent on the nature of the substituents that are present on the alkyne.     

Recognition Properties and Self‐assembly of Planar [M(2‐pyridyl‐1,2,3‐triazole)2]2+ Metallo‐ligands

Molecular recognition continues to be an area of keen interest for supramolecular chemists. The investigated [M( L )₂]²⁺ metallo‐ligands (M=Pd^II, Pt^II, L =2‐(1‐(pyridine‐4‐methyl)‐1 H‐1,2,3‐triazol‐4‐yl)pyridine) form a planar cationic panel with vacant pyridyl binding sites. They interact with planar neutral aromatic guests through π–π and/or metallophilic interactions. In some cases, the metallo‐ligands also interacted in the solid state with Ag^I either through coordination to the pendant pyridyl arms, or through metal–metal interactions, forming coordination polymers. We have therefore developed a system that reliably recognises a planar electron‐rich guest in solution and in the solid state, and shows the potential to link the resultant host–guest adducts into extended solid‐state structures. The facile synthesis and ready functionalisation of 2‐pyridyl‐1,2,3‐triazole ligands through copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) “click” chemistry should allow for ready tuning of the electronic properties of adducts formed from these systems.