Electronic Properties of Interfaces between PCPDTBT and Prototypical Electrodes Studied by Photoemission Spectroscopy

We report on the electronic structure of poly[2,6‐(4,4‐bis‐ (2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene)‐alt‐4,7(2,1,3‐benzothiadiazole)] (PCPDTBT), a promising low‐band‐gap donor material for efficient bulk heterojunction organic solar cells. Electronic properties of interfaces formed between PCPDTBT and prototypical electrodes [Au, indium‐tin‐oxide and poly(ethylene‐dioxythiophene): poly(styrenesulfonate)], obtained from X‐ray photoemission spectroscopy and ultraviolet photoemission spectroscopy, are evaluated. The formation of interface dipoles is observed, and their consequences for device performance are discussed. For the system PCPDTBT/Au chemical interactions occur, which may affect in particular the charge extraction at the corresponding interface.     

Information depth determination for hard X‐ray photoelectron spectroscopy up to 15 keV photoelectron kinetic energy

In the present work, we have determined the information depth in a solid for hard X‐ray photoelectron spectroscopy (HAXPES) up to a photoelectron kinetic energy of 15 keV. For that, we have followed the evolution of the photoemission signal from different core levels of a gold overlayer grown in situ on a polycrystalline copper substrate as a function of the photoelectron kinetic energy. We demonstrate that in the case of gold, an information depth of 57 nm can be achieved by detecting photoelectrons with 15‐keV kinetic energy. The photoemission signal produced at this depth corresponds to 0.2% of the signal coming from a semi‐infinite solid bulk. Such a high sensitivity can only be reached with the combination of a third‐generation synchrotron radiation beam with a high‐transmission electron analyzer. Copyright © 2008 John Wiley & Sons, Ltd.     

An Experimental and Theoretical Approach to Investigate the Effect of Chain Length on Aminothiol Adsorption and Assembly on Gold

Despite the numerous studies on the self‐assembled monolayers (SAMs) of alkylthiols on gold, the mechanisms involved, especially the nature and influence of the thiol–gold interface are still under debate. In this work the adsorption of aminothiols on Au(111) surfaces has been studied by using surface IR and X‐ray photoelectron spectroscopy (XPS) as well as by density functional theory (DFT) modeling. Two aminothiols were used, cysteamine (CEA) and mercaptoundecylamine (MUAM), which contain two and eleven carbon atoms, respectively. By combining experimental and theoretical methods, it was possible to draw a molecular picture of the thiol–gold interface. The long‐chain aminothiol produced better ordered SAMs, but, interestingly, the XPS data showed different sulfur binding environments depending on the alkyl chain length; an additional peak at low binding energy was observed upon CEA adsorption, which indicates the presence of sulfur in a different environment. DFT modeling showed that the positions of the sulfur atoms in the SAMs on gold with similar unit cells [(2√3×2√3)R30°] depended on the length of the alkyl chain. Short‐chain alkylthiol SAMs were adsorbed more strongly than long‐chain thiol SAMs and were shown to induce surface reconstruction by extracting atoms from the surface, possibly forming adatom/vacancy combinations that lead to the additional XPS peak. In the case of short alkylthiols, the thiol–gold interface governs the layer, CEA adsorbs strongly, and the mechanism is closer to single‐molecule adsorption than self‐assembly, whereas for long chains, interactions between alkyl chains drive the system to self‐assembly, leading to a higher level of SAM organization and restricting the influence of the sulfur–gold interface.     

Tuning thermal stability and electronic properties of germanium oxide on Ge(001) surface with the incorporation of nitrogen

The application of germanium as a channel material of transistors in near future requires an improved understanding of the interface between germanium and its potential passivation layer. In this study, we study effects of nitrogen incorporation on the thermal stability and electronic properties of GeO_xN_y/Ge interface by using high‐resolution X‐ray photoemission spectroscopy. We find that with the increasing nitrogen concentration in the GeO_xN_y films, the thermal stability can be increased, while the valence band offset with the Ge(001)substrate is decreased. First‐principles calculations further suggest that the unpaired p orbitals of nitrogen atoms induce electronic states near valence band edge, contributing to the reduction of the valence band offset. Our results provide a possibility to tune electronic and thermal properties of GeO_xN_y/Ge interface by controlling nitrogen concentrations during the growth.     

The Hybrid of Gold Nanoparticles and 3D Flower‐like MnO2 Nanostructure with Enhanced Activity for Detection of Hydrogen Peroxide

3D Flower‐like manganese dioxide (MnO₂) nanostructure with the ability of catalysis for hydrogen peroxide (H₂O₂) and super large area that can support gold nanoparticles (AuNPs) with enhanced activity of electron transfer have been developed. The nanostructure of hybrids was prepared by directly mixing citric‐capped AuNPs and 3‐aminopropyltriethoxysilane (3‐APTES)‐capped nano‐MnO₂ using an electrostatic adsorption strategy. The Au‐MnO₂ composite was extensively characterized by scanning electron microscope (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), the Brunauer‐Emmett‐Teller (BET) method and X‐ray photoemission spectroscopy (XPS). Electrochemical properties were evaluated through cyclic voltammetry (CV) and amperometric method. The prepared sensor showed excellent electrochemical properties towards H₂O₂ with a wide linear range from 2.5×10⁻³∼1.39 mM and 3.89∼13.89 mM. The detection limit is 0.34 μM (S/N=3) with the sensitivities of 169.43 μA mM⁻¹ cm⁻² and 55.72 μA mM⁻¹ cm⁻². The detection of real samples was also studied. The result exhibited that the prepared sensor can be used for H₂O₂ detection in real samples.     

Identification of [(GS)2AsSe]− in rabbit bile by size‐exclusion chromatography and simultaneous multielement‐specific detection by inductively coupled plasma atomic emission spectroscopy

An arsenic–selenium metabolite that exhibited the same arsenic and selenium X‐ray absorption near‐edge spectra as the synthetic seleno‐bis(S‐glutathionyl) arsinium ion [(GS)₂AsSe]^? was recently detected in rabbit bile within 25 min after intravenous injection of rabbits with sodium selenite and sodium arsenite. X‐ray absorption spectroscopy did not (and cannot) conclusively identify the sulfur‐donor in the in vivo sample. After similar treatment of rabbits, we analyzed the collected bile samples by size‐exclusion chromatography (SEC) using inductively coupled plasma atomic emission spectroscopy (ICP‐AES) to monitor arsenic, selenium and sulfur simultaneously. The bulk of arsenic and selenium eluted in a single peak, the intensity of which was greatly increased upon spiking of the bile samples with synthethic [(GS)₂AsSe]^?. Hence, we identify [(GS)₂AsSe]^? as the major metabolite in bile after exposure of rabbits to selenite and arsenite. The reported SEC–ICP‐AES method is the first chromatographic procedure to identify this biochemically important metabolite in biological fluids and is thus a true alternative to X‐ray absorption spectroscopy, which is not available to many chemists. Copyright © 2001 John Wiley & Sons, Ltd.     

Thioether‐Functionalized Quinone‐Based Resorcin[4]arene Cavitands: Electroswitchable Molecular Actuators

The utility of molecular actuators in nanoelectronics requires activation of mechanical motion by electric charge at the interface with conductive surfaces. We functionalized redox‐active resorcin[4]arene‐quinone cavitands with thioethers as surface‐anchoring groups at the lower rim and investigated their propensity to act as electroswitchable actuators that can adopt two different conformations in response to changes in applied potential. Molecular design was assessed by DFT calculations and X‐ray analysis. Electronic properties were experimentally studied in solution and thin films electrochemically, as well as by X‐ray photoelectron spectroscopy on gold substrates. The redox interconversion between the oxidized (quinone, Q ) and the reduced (semiquinone, SQ ) state was monitored by UV‐Vis‐NIR spectroelectrochemistry and EPR spectroscopy. Reduction to the SQ state induces a conformational change, providing the basis for potential voltage‐controlled molecular actuating devices.     

New Insights into Sulfur Deposition on Gold Using Dithiobisphthalimide as a New Precursor

Dithiobisphthalimide is used as a new precursor for the spontaneous deposition of sulfur on gold surfaces in acetonitrile. Characterization of the modified surfaces is achieved using X‐ray photoelectron spectroscopy (XPS), electrochemistry and scanning tunneling microscopy (STM). The reported results indicate that the sulfur deposition is an efficient and fast process and that high coverages can be reached very quickly. Sequential high‐resolution STM in air allows the direct observation, for the first time, of the mobility of the usually observed rectangular structures as individual units. It also shows the reversible association/dissociation of these rectangles. The nature of these structures is highly debated in the literature and the present work provides new insights into their nature through the use of a new sulfur precursor under non‐traditional conditions. To explain our results we consider these structures as simple sulfur adlayers on the gold surface.     

Synthesis and Characterization of Core‐Shell Selenium/Carbon Colloids and Hollow Carbon Capsules

A novel Se/C nanocomposite with core‐shell structures has been prepared through a facile one‐pot microwave‐induced hydrothermal process. The new material consists of a trigonal‐Se (t‐Se) core and an amorphous‐C (a‐C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. These products were characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), energy‐dispersive X‐ray (EDX) spectroscopy, and X‐ray photoelectron spectroscopy (XPS).     

Engineering a Cu‐MOF Nano‐Catalyst by using Post‐Synthetic Modification for the Preparation of 5‐Substituted 1H‐Tetrazoles

A new nano scale Cu‐MOF has been obtained via post‐synthetic metalation by immersing a Zn‐MOF as a template in DMF solutions of copper(II) salts. The Cu‐MOF serves as recyclable nano‐catalyst for the preparation of 5‐substituted 1H‐tetrazoles via [3 + 2] cycloaddition reaction of various nitriles and sodium azide in a green medium (PEG). The post‐synthetic metalated MOF were characterized by FT‐IR spectroscopy, powder X‐ray diffraction (PXRD), atomic absorption spectroscopy (AAS), and energy dispersive X‐ray spectroscopy (EDX) techniques. The morphology and size of the nano‐catalyst were determined by field emission scanning electron microscopy (FE‐SEM).     

Facile Chan‐Lam coupling using ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene

Ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene ([GrFemImi]NHC@Cu complex) has been synthesized by covalent grafting of ferrocenyl ionic liquid in the matrix of graphene followed by metallation with copper (I) iodide. The [GrFemImi]NHC@Cu complex has been characterized by fourier transform infrared (FT‐IR), fourier transform Raman (FT‐Raman), CP‐MAS ¹³C NMR spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), energy dispersive X‐ray (EDX) analysis, X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis and X‐ray diffractometer (XRD) analysis. This novel complex served as a robust heterogeneous catalyst for the synthesis of bioactive N‐aryl sulfonamides from variety of aryl boronic acids and sulfonyl azides in ethanol by Chan‐Lam coupling. Recyclability experiments were executed successfully for six consecutive runs.     

Synthesis of Imatinib‐loaded chitosan‐modified magnetic nanoparticles as an anti‐cancer agent for pH responsive targeted drug delivery

Targeted drug delivery is a promising approach to overcome the limitations of classical chemotherapy. In this respect, Imatinib‐loaded chitosan‐modified magnetic nanoparticles were prepared as a pH sensitive system for targeted delivery of drug to tumor sites by applying a magnetic field. The proposed magnetic nanoparticles were prepared through modification of magnetic Fe₃O₄ nanoparticles with chitosan and Imatinib. The structural, morphological and physicochemical properties of the synthesized nanoparticles were determined by different analytical techniques including energy‐dispersive X‐ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), Fourier‐transform infrared (FTIR) spectroscopy, high resolution transmission electron microscopy (HR‐TEM), vibrating sample magnetometry (VSM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). UV/visible spectrophotometry was used to measure the Imatinib contents. Thermal stability of the prepared particles was investigated and their efficiency of drug loading and release profile were evaluated. The results demonstrated that Fe₃O₄@CS acts as a pH responsive nanocarrier in releasing the loaded Imatinib molecules. Furthermore, the Fe₃O₄@CS/Imatinib nanoparticles displayed cytotoxic effect against MCF‐7 breast cancer cells. Results of this study can provide new insights in the development of pH responsive targeted drug delivery systems to overcome the side effects of conventional chemotherapy.     

Influence of thermal annealing on the structural and optical properties of maghemite (γ‐Fe2O3) nanoparticle thin films

In this study, maghemite (γ‐Fe₂O₃) nanoparticles were initially synthesized via chemical co‐precipitation and then deposited by spray pyrolysis as thin films on white glass substrates. The thin films were annealed for 8 h at 400, 450, 500, 550, and 600 °C in an oven. The structural studies of maghemite nanoparticles were carried out using X‐ray diffractometer. Structural properties that we investigated by X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, SEM, and Energy dispersive X‐ray analysis (EDS). Optical properties of the samples were also investigated by ultraviolet‐visible (UV–vis) spectroscopy. The results showed that maghemite nanoparticles have crystalline structure with domain that increases in size with increasing annealing temperature. The optical band gap values were found to reduce from 2.9 to 2.4 eV with increase in annealing temperature. Copyright © 2015 John Wiley & Sons, Ltd.     

Polymeric Heterogeneous Catalysts of Transition‐Metal Oxides: Surface Characterization,Physicomechanical Properties,and Catalytic Activity

We investigate the physicomechanical properties of polymeric heterogeneous catalysts of transition‐metal oxides, specifically, the specific surface area, elongation at break, breaking strength, specific electrical resistance, and volume resistivity. Digital microscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and energy‐dispersive analysis are used to study the surfaces of the catalysts. The experimental results show that polymeric heterogeneous catalysts of transition‐metal oxides exhibit high stability and can maintain their catalytic activity under extreme reaction conditions for long‐term use. The oxidation mechanism of sulfur‐containing compounds in the presence of polymeric heterogeneous catalysts of transition‐metal oxides is confirmed. Microstructural characterization of the catalysts is performed by using X‐ray computed tomography. The activity of various catalysts in the oxidation of sulfur‐containing compounds is determined. We demonstrate the potential application of polymeric heterogeneous catalysts of transition‐metal oxides in industrial wastewater treatment.     

Tunable Trimers: Using Temperature and Pressure to Control Luminescent Emission in Gold(I) Pyrazolate‐Based Trimers

A systematic investigation into the relationship between the solid‐state luminescence and the intermolecular Au???Au interactions in a series of pyrazolate‐based gold(I) trimers; tris(μ₂‐pyrazolato‐N,N′)‐tri‐gold(I) ( 1 ), tris(μ₂‐3,4,5‐ trimethylpyrazolato‐N,N′)‐tri‐gold(I) ( 2 ), tris(μ₂‐3‐methyl‐5‐phenylpyrazolato‐N,N′)‐tri‐gold(I) ( 3 ) and tris(μ₂‐3,5‐diphenylpyrazolato‐N,N′)‐tri‐gold(I) ( 4 ) has been carried out using variable temperature and high pressure X‐ray crystallography, solid‐state emission spectroscopy, Raman spectroscopy and computational techniques. Single‐crystal X‐ray studies show that there is a significant reduction in the intertrimer Au???Au distances both with decreasing temperature and increasing pressure. In the four complexes, the reduction in temperature from 293 to 100 K is accompanied by a reduction in the shortest intermolecular Au???Au contacts of between 0.04 and 0.08 Å. The solid‐state luminescent emission spectra of 1 and 2 display a red shift with decreasing temperature or increasing pressure. Compound 3 does not emit under ambient conditions but displays increasingly red‐shifted luminescence upon cooling or compression. Compound 4 remains emissionless, consistent with the absence of intermolecular Au???Au interactions. The largest pressure induced shift in emission is observed in 2 with a red shift of approximately 630 cm^?1 per GPa between ambient and 3.80 GPa. The shifts in all the complexes can be correlated with changes in Au???Au distance observed by diffraction.     

SPring‐8 BL36XU: Synchrotron Radiation X‐Ray‐Based Multi‐Analytical Beamline for Polymer Electrolyte Fuel Cells under Operating Conditions

We designed and constructed a beamline BL36XU at the 8 GeV synchrotron radiation facility SPring‐8 to provide information required for the development of next‐generation polymer electrolyte fuel cells (PEFCs) by clarifying the dynamic aspects of structures and electronic states of cathode catalysts under PEFC operating conditions and in the deterioration processes by accelerated durability test protcols. To investigate the mechanism and degradation process for the cathode electrocatalysis in practical PEFCs, we developed advanced time‐ and spatially‐resolved in‐situ/operando X‐ray absorption fine structure measurement systems and complementary analytical systems (X‐ray emission spectroscopy (XES), X‐ray diffraction (XRD), X‐ray computer tomography (CT) and hard X‐ray photoelectron spectroscopy (HAXPES)) and combined them to develop multi‐analytical systems at BL36XU. Multi‐analytical systems are very powerful for observing spatial‐temporal features of the transient processes occurring in complex systems such as PEFCs. This account describes the design, performance, and research results of the BL36XU and multi‐analytical in‐situ/operando systems.     

Novel biphasic structured composite prepared by in situ silica filling in natural rubber latex

The sol‐gel reaction of tetraethoxysilane in natural rubber (NR) latex was conducted to produce in situ silica‐filled NR latex, followed by adding sulfur cross‐linking reagents to the latex in a liquid state. The latex was cast and subjected to sulfur curing to result in a unique morphology in the NR composite of a flexible film form. The contents of in situ silica filling were controlled up to 35 parts per one hundred rubber by weight. The silica was locally dispersed around rubber particles to give a filler network. This characteristic morphology brought about the composite of good dynamic mechanical properties. Synchrotron X‐ray absorption near‐edge structure spectroscopy suggested that the sulfidic linkages of the sulfur cross‐linked composites were polysulfidic, S_x (x ≥ 2), and a fraction of shorter polysulfidic linkages became larger with the increase of in situ silica. The present observations will be of use for developing a novel in situ silica‐filled NR composite prepared in NR latex via liquid‐phase soft processing. Copyright © 2011 John Wiley & Sons, Ltd.     

X‐ray‐induced degradation of OEG‐terminated SAMs on silica surfaces during XPS characterization

Oligo ethylene glycol layers are widely used in biosensor applications, mainly for their anti‐fouling abilities. Such surfaces are often characterized by X‐ray photoelectron spectroscopy (XPS) as this method allows a precise determination of the surface chemical composition. We show herein that X‐rays used during XPS characterization quickly and significantly degrade oligo ethylene glycol immobilized onto silica substrates. It is therefore necessary to introduce a correcting factor to assess the true (i.e. without degradation) corresponding ether contribution in the XPS spectrum of such organic layers. Eventually, fluorescence scans show the loss of anti‐fouling properties of the degraded surface, leading to greater amounts of adsorbed (fluorescently labeled) protein. Copyright © 2015 John Wiley & Sons, Ltd.     

1,2,4‐Triazole‐based N‐heterocyclic carbene complexes of gold(I): synthesis,characterization and biological activity

Two gold(I) complexes of the (NHC)AuX type bearing a triazole‐based N‐heterocyclic carbene (NHC) ligand (1‐tert‐butyl‐4‐(4‐methylphenyl)‐3‐phenyl‐1H‐1,2,4‐triazol‐4‐ium‐5‐ylidene) and various halide ligands (X = Br, I) were synthesized and characterized in solution using NMR spectroscopy as well as in the solid state using X‐ray diffraction techniques. The cytotoxic properties of both compounds and the precursor, (NHC)AuCl, were screened against a panel of human tumour cell lines including liver cancer (HepG2), cervical cancer (HeLa S3) and leukaemia (CCRF‐CEM, HL‐60) and compared to cisplatin and auranofin. It was found that the activities of the chloro and bromo derivatives were generally superior to that of cisplatin and slightly less effective compared to auranofin, except for HepG2 cells where auranofin was not as effective. In addition, the ability to induce membrane phosphatidyl serine externalization as a hallmark of apoptosis in CCRF‐CEM leukaemic cells was investigated. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthetic and Structural Studies of 1,8‐Chalcogen Naphthalene Derivatives

Four novel 1,8‐disubstituted naphthalene derivatives 4 – 7 that contain chalcogen atoms occupying the peri positions have been prepared and fully characterised by using X‐ray crystallography, multinuclear NMR spectroscopy, IR spectroscopy and MS. Molecular distortion due to noncovalent substituent interactions was studied as a function of the bulk of the interacting chalcogen atoms and the size and nature of the alkyl group attached to them. X‐ray data for 4 – 7 was compared to the series of known 1,8‐bis(phenylchalcogeno)naphthalenes 1 – 3 , which were themselves prepared from novel synthetic routes. A general increase in the E???E′ distance was observed for molecules containing bulkier atoms at the peri positions. The decreased S???S distance from phenyl‐ 1 and ethyl‐ 4 analogues is ascribed to a weaker chalcogen lone pair–lone pair repulsion acting in the ethyl analogue due to the presence of two equatorial S(naphthyl) ring conformations. Two novel peri‐substituted naphthalene sulfoxides of 1 , Nap(O?SPh)(SPh) 8 and Nap(O?SPh)₂ 9 , which contain different valence states of sulfur, were prepared and fully characterised by using X‐ray crystallography and multinuclear NMR spectroscopy, IR spectroscopy and MS. Molecular structures were analysed by using naphthalene ring torsions, peri‐atom displacement, splay angle magnitude, S???S interactions, aromatic ring orientations and quasi‐linear O?S???S arrangements. The axial S(naphthyl) rings in 8 and 9 are unfavourable for S???S contacts due to stronger chalcogen lone pair–lone pair repulsion. Although quasi‐linear O?S???S alignments suggest attractive interaction is conceivable, analysis of the B3LYP wavefunctions affords no evidence for direct bonding interactions between the S atoms.