Synthesis and photochromic properties of functional diarylethene with a 2,5-dihydrothiophene bridging unit

A novel synthetic route to symmetric and nonsymmetric dithienylethene derivatives with a 2,5-dihydrothiophene bridging unit was described. A class of new functional photochromic compounds was prepared and showed photochromic properties similar to those of known diarylethenes. [reaction: see text]     

具有多个光致变色单元的二芳基乙烯分子光密度的增加

3,4-Diaryl-2,5-dihydropyrrole with multiphotochromophore units la was synthesized and its photochromic properties were investigated. It showed that all photochromophore units underwent reversible ring-opening （1a） and ring-closing （1b） photoisomerization reactions in both solution and polymer film with UV/Vis light irradiation, and photochromic properties of la were similar to those of photochromic diarylethene with monophotochromophore 2a. It was found that the optical density of lb was increased linearly with increase of the photochromophore units by comparison with that of 2b in the same condition. It was also found that no significant changes in absorption band and response time between diarylethenes with multiphotochromophores and monophotochromophore were detected in the same condition.     

One-pot oxidation and bromination of 3,4-diaryl-2,5-dihydrothiophenes using Br2: synthesis and application of 3,4-diaryl-2,5-dibromothiophenes

A class of 3,4-diaryl-2,5-dibromothiophenes (1b-5b) was synthesized by a one-pot reaction of 3,4-diaryl-2,5-dihydrothiophenes with Br2 reagent in excellent yield (83-92%). It was found that Br2 performed a double function (oxidation and bromination) during the conversion of 3,4-diaryl-2,5-dihydrothiophenes to 3,4-diaryl-2,5-dibromothiophenes. The application of 3,4-diaryl-2,5-dibromothiophenes used as building blocks was also investigated. Employing 3,4-diphenyl-2,5-dibromothiophene (1b) as a template, a class of 2,3,4,5-tetraarylthiophenes was prepared by the Suzuki coupling reaction. This provided a new and simple approach to the preparation of 2,3,4,5-tetraarylthiophenes.     

Solubility of 2,5-dimethylphenol and 3,4-dimethylphenol in binary solvent mixtures containing alcohols

Solubilities are reported for 3,4-dimethylphenol and 2,5-dimethylphenol in binary mixtures of ethyl acetate with alcohols (methanol, 1-butanol, 1-hexanol), as well as for 2,5-dimethylphenol in binary mixtures of hexane with 1-butanol. The results of these measurements are compared to those obtained from the predictions by the Wilson equation for the excess Gibbs free energy of mixing (G^E). Parameters in binary solute—solvent systems were regressed from solid—liquid equilibrium data, whereas for binary mixed solvents they were taken from literature data of vapour—liquid equilibrium as well as from solid—liquid equilibrium data in ternary mixtures for equimolar compositions of binary solvents. The systems containing 3,4-dimethylphenol—ethyl acetate+alcohol mixed solvents were found to exhibit a small synergistic effect of solubility.     

Visible Light-Induced Synthesis of 3,4-Diarylthiophenes from 3,4-Diaryl-2,5-dihydrothiophenes

Using a catalytic amount of platinum(II) terpyridyl complex 3, 3,4-diarylthiophenes (2a-f) could be synthesized from 3,4-diaryl-2,5-dihydrothiophenes (1a-f) under visible light (λ > 450 nm) irradiation in degassed CH(3)CN. Spectroscopic study and product analysis reveal that the reaction is initiated by photoinduced electron transfer from 3,4-diaryl-2,5-dihydrothiophenes to platinum(II) complex 3, leading to the formation of 3,4-diarylthiophenes.     

Reaction of 3,4-diiodo-2,5-dimethyl-1H-pyrrole with thioamides

3,4-Diiodo-2,5-dimethyl-1H-pyrrole reacted with thioacetamide in polar solvents or under solvent-free conditions to give 2,4,6-trimethyl-5H-pyrrolo[3,4-d][1,3]thiazole. The major product in the reaction of the title compound with thiobenzamide was 3,5-diphenyl-1,2,4-thiadiazole.     

Toward new materials for organic electroluminescent devices: synthesis, structures, and properties of a series of 2,5-diaryl-3,4-diphenylsiloles

A series of 2,5-diaryl-3,4-diphenylsiloles, with various mono-substituted phenyl groups, extended pi-conjugated groups, and heteroaryl groups as aryl groups at the 2,5-positions, has been prepared by a one-pot synthesis from bis(phenylethynyl)silanes based on the intramolecular reductive cyclization followed by the palladium-catalyzed cross-coupling with aryl halides. Crystal structures and chemical reactivities toward the alkaline desilylation reactions have been studied on the 2,5-bis(p-mono-substituted phenyl)silole derivatives to elucidate the effects of the p-substituents. The UV-visible absorption and fluorescence spectra, and cyclic voltammetry of the 2,5-diarylsiloles have been systematically evaluated. Their photophysical properties as well as their electronic structures significantly depend on the nature of the 2,5-aryl groups.     

Mechanism and selectivity of radical alkylation of 3,4-Dichloro-2,5-dihydrofuran-2,5-dione

The mechanism of radical alkylation of 3,4-dichloro-2,5-dihydrofuran-2,5-dione with cyclohexane and 2,3-dimethylbutane follows an addition-elimination pattern with reversible formation of alkyl radicals. The proposed kinetic scheme takes into account the possibility for isomerization of primary 2,3-dimethylbutane radicals into tertiary and is consistent with the experimental data. The regioselectivity of the process is linearly related to the concentration of hydrogen chloride, so that the rate constant for the addition of primary 2,3-dimethylbutane radical to 3,4-dichloro-2,5-dihydrofuran-2,5-dione may be estimated. Effective procedures for the synthesis of 3-chloro-4-(2,3-dimethylbut-2-yl)-, 3-chloro-4-cyclohexyl-, and 3,4-dicyclohexyl-2,5-dihydrofuran-2,5-diones have been proposed.     

Synthesis and characterization of soluble aromatic polyazomethines from 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene and aromatic dialdehydes

New soluble aromatic polyazomethines with inherent viscosities of 0.4–0.8 dL/g were prepared by the solution polycondensation of 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene, bis(4-aminophenyl) ether, and aromatic dialdehydes in o-chlorophenol at 20°C. The copolyazomethines are generally soluble in chlorinated hydrocarbons, amide-type or phenolic solvents. The thermal stability of the polymers, which showed no weight loss up to 400°C in both air and nitrogen atmospheres.     

Ring-closing metathesis toward the synthesis of 2,5-dihydrofuran and 2,5-dihydropyrrole skeletons from Baylis-Hillman adducts

We have developed an efficient method for the synthesis of 2,5-dihydrofuran and 2,5-dihydropyrrole skeletons from the simply modified Baylis-Hillman adducts via RCM reaction.     

Mechanistic study of electrochemical oxidation of 2,5-dihydroxybenzoic acid and 3,4-dihydroxybenzaldehyde in the presence of 3-hydroxy-1H-phenalene-1-one

The mechanism of the electrochemical oxidation of 2,5-dihydroxybenzoic acid and 3,4-dihydroxybenzaldehyde in the presence of 3-hydroxy-1H-phenalene-1-one as a nucleophile has been studied in water/acetonitrile (80/20 v/v) solution using cyclic voltammetry and controlled-potential coulometry methods. The results indicate that the quinones derived from oxidation of 2,5-dihydroxybenzoic acid and 3,4-dihydroxybenzaldehyde participate in Michael addition reactions with 3-hydroxy-1H-phenalene-1-one and via ECE and ECEC mechanisms convert to the different products, with good yield under controlled potential conditions, at carbon electrode.     

Microwave assisted synthesis of spiro-2,5-diketopiperazines

A general and efficient method for the synthesis of spiro-2,5-diketopiperazines (spiro-DKPs) is described. Cyclization of Boc-protected dipeptides containing spiro-amino acids by microwave assisted heating in water furnished the corresponding spiro-DKPs. The spiro-amino acids were prepared by combining stereoselective alkylation reactions using the Schöllkopf methodology for amino acid construction with Grubbs ring-closing metathesis (RCM) methodology using ruthenium complexes. The RCM reactions and all subsequent transformations to the spiro-DKPs were run with microwave assisted heating, resulting in high yields and short reaction times for all steps.     

New photochromic symmetrical and unsymmetrical bis(heteroaryl)maleimides: A spectrokinetic study

The photochromic behavior of two newly synthesized diarylethenes is here presented. The compounds studied are the symmetrical (1-benzyl-3,4-bis(2-methylbenzo[b]thiophen-3-yl)-[1H]-2,5-dihydropyrrol-2,5-dione) and the unsymmetrical (1-benzyl-3-(2-methylbenzo[b]thiophen-3-yl)-4-(2,5-dimethyl-3-thienyl)-[1H]-2,5-dihydropyrrol-2,5-dione). Upon stimulation with UV or violet light, these compounds become red-colored due to photocyclization and cyclorevert to the light yellow open form upon irradiation with visible light. In this work, absorption and fluorescence spectra, molar absorption coefficients of the ethenic and cyclized forms, fluorescence quantum yields and photochemical quantum yields of both the forward and back photoreactions were determined. Temperature, excitation wavelength and solvent effects were explored. The symmetrical compound was found to be a bistable photochrome. In contrast, the unsymmetrical molecule resulted unsuitable as photochrome because of side degradation processes occurring in competition with cyclization.     

2,5-二甲基-3,4-二乙酰基-1-芳基吡咯的合成

多取代吡咯;二乙酰基己二酮;取代苯胺;2;5-二甲基-3;4-二乙酰基-1-芳基吡咯的合成     

Synthesis and mechanism of formation of novel 2,5-dihydro-2,5-diimino-3,4-di[(N,N-dimethylamino)methylideneamino]pyrroles and 5-amino-3,4-di[(N,N-dimethylamino)methylideneamino]-2H-2-iminopyrroles

Formation of 5-amino-3,4-di[(N,N-dimethylarnino)methylidenearnino]-2H-2-iminopyrroles 3 from the reaction of (Z)-N¹-(2-amino-1,2-dicyanovinyl)-N²-substituted-formamidines 1 with dimethylformamide diethyl acetal has been shown to occur by initial formation of (Z)-N¹-{l,2-dicyano-2-[N,N-dimethylamino)methylideneamino]vinyl}formamidines 8 (isolated), followed by base catalysed cyclisation and imi dazole ring opening by dimethyl amine. The kinetic product of the ring opening reaction is the 2,5-diimino2,5-dihydropyrrole derivatives 11, which have been isolated and characterized spectroscopically and by a single crystal X-ray analysis on the R = Ph derivative. In solution at room temperature the N-aryl derivatives undergo a rapid Dimroth rearrangement to give the thermodynamic ally more stable isomer 3 , but compound 11 (R = Me) is much more stable in solution.     

Synthesis and characterization of soluble aromatic polyamides from 2,5-bis(4-aminophenyl)—3,4-diphenylthiophene and aromatic diacid chlorides

New soluble aromatic polyamides with inherent viscosities of 1.0–1.7 dL/g were prepared by the low temperature solution polycondensation of 2,5-bis(4-aminophenyl)—3,4-diphenylthiophene, bis(4-aminophenyl) ether, and aromatic diacid chlorides in N,N-dimethylacetamide. The polyamides and copolyamides are generally soluble in amide-type solvents. They have glass transition temperatures in the range of 280–325°C and showed no weight loss below 390°C on thermogravimetry curves in both air and nitrogen atmospheres.     

Solution and solid-state studies of 3,4-dichloro-2,5-diamidopyrroles: formation of an unusual anionic narcissistic dimer

3,4-Dichoro-1H-pyrrole-2,5-dicarboxylic acid bis-phenylamide 3 and 3,4-dichoro-1H-pyrrole-2,5-dicarboxylic acid bis-butylamide 4 have been prepared and shown to deprotonate in the presence of basic anions: the X-ray crystal structure of the tetrabutylammonium salt of 3-H+ reveals the formation of a dimer in the solid state.     

Synthesis, structure, aggregation-induced emission, self-assembly, and electron mobility of 2,5-bis(triphenylsilylethynyl)-3,4-diphenylsiloles

2,5-Bis(triphenylsilylethynyl)-3,4-diphenylsiloles with different 1,1-substituents [XYSi(CPh)(2) (C-C≡C-SiPh(3))(2)] (Ph=phenyl) were synthesized in high yields by the Sonogashira coupling of 2,5-dibromo-3,4-diphenylsiloles with triphenylsilylacetylene, and two of these were characterized crystallographically. Crystal structures and theoretical calculations showed that the new silole molecules had higher conjugation than 2,5-diarylsiloles. They possessed low HOMO and LUMO energy levels due to the electron-withdrawing effect of the triphenylsilylethynyl groups. Cyclic voltammetry analysis revealed low electron affinities, which were comparable to those of perfluoroarylsiloles. B3LYP/6-31* calculations demonstrated that the new siloles possessed large reorganization energies for electron and hole transfers and high electron mobilities. A mobility of up to 1.2×10(-5) cm(2) V(-1) s(-1) was obtained by the transient electroluminescence method, which was about fivefold higher than that of tris(8-hydroxyquinolinato)aluminum, a widely used electron-transport material, under the same conditions. All of the silole molecules possessed high thermal stability. Although, their solutions were weakly emissive, their nanoparticle suspensions and thin films emitted intense blue-green light upon photoexcitation, demonstrating a novel feature of aggregation-induced emission (AIE). Polarized emissions were observed in the silole crystals. The addition of solvents, which did not dissolve the silole molecules, into silole-containing solutions caused self-assembly of the molecules, which produced macroscopic fibrils with strong light emissions.     

Efficient One‐step Synthesis and Properties of Photochromic Diarylethenes Having an Indene Bridging Unit

Two novel isomeric photochromic diarylethenes with an indene bridging unit have been prepared by a simple and efficient one‐step synthesis method. Their properties, including photochromic behavior, fluorescent properties and fatigue resistance, have been investigated. These two isomeric compounds showed photochromic back‐and‐forth reactions with ultraviolet and visible light both in solution and in PMMA film. Their ring‐open forms exhibited appreciable fluorescence, which was quenched by the ring‐closed forms. All results indicated that diarylethenes derivatives with indene‐aryl bridges exhibited rather high fatigue resistance and good thermally irreversible photochromic properties.     

Über Metallkomplexe des 2,5-Dibenzoyl-3,4-dihydroxyselenophens

Zusammenfassung 2,5-Dibenzoyl-3,4-dihydroxyselenophen bildet im p_H-Bereich zwischen 7,0 und 9,5 mit Blei, Kobalt, Kupfer, Nickel und Zink Komplexe der Zusammensetzung 11, die nach der Methode der stetigen Veränderung und nach der Methode der molaren Verhältnisse bestimmt wurde. Die Logarithmen der Stabilitätskonstanten dieser Komplexe wurden nach zwei verschiedenen Methoden ermittelt und betragen 5,4 bis 6,9.

---

Metal complexes of 2,5-dibenzoyl-3,4-dihydroxyselenophen

Summary 2,5-Dibenzoyl-3,4-dihydroxyselenophen, in the p_H region between 7.0 and 9.5, reacts with lead, cobalt, copper, nickel and zinc to yield complexes having the composition 11, which were determined by the method of continuous variation and by the method of molar ratios. The logarithms of the stability constants of these complexes were determined by two different methods; they were found to be 5.4 to 6.9.