A novel technique for detecting single nucleotide polymorphisms by analyzing consumed allele-specific primers

We present a simple and rapid polymerase chain reaction (PCR)-based technique, termed consumed allele-specific primer analysis (CASPA), as a new strategy for single nucleotide polymorphism (SNP) analysis. The method involves the use of labeled allele-specific primers, differing in length, with several noncomplementary nucleotides added in the 5'-terminal region. After PCR amplification, the amounts of the remaining primers not incorporated into the PCR products are determined. Thus, nucleotide substitutions are identified by measuring the consumption of primers. In this study, the CASPA method was successfully applied to ABO genotyping. In the present method, the allele-specific primer only anneals with the target polymorphic site on the DNA, so it is not necessary to analyze the PCR products. Therefore, this method is only little affected by modification of the PCR products. The CASPA method is expected to be a useful tool for typing of SNPs.     

Lateral flow dipstick test for genotyping of 15 beta-globin gene (HBB) mutations with naked-eye detection

For definitive diagnosis of thalassemia carriers and patients, as well as for prenatal diagnosis, genotype analysis is of fundamental importance. We report a dry-reagent, lateral flow dipstick test that enables visual genotyping (detection by naked eye) of 15 mutations common in Mediterranean populations in the beta-globin gene (HBB). The method comprises 3 simple steps: (i) PCR amplification of a single 1896 bp segment of the beta globin gene flanking all 15 mutations; (ii) a multiplex (10-plex and/or 30-plex) primer extension reaction of the unpurified amplification product using allele-specific primers. Biotin is incorporated in the extended product; (iii) a dry-reagent multi-allele (10-plex) dipstick assay for visual detection of the primer extension reaction products within minutes. The total time required for PCR, primer extension reaction and the dipstick assay is ∼2 h. The method was evaluated by genotyping 45 DNA samples of known genotypes and 54 blind samples. The results were fully concordant with reference methods. The method is simple, rapid, and cost-effective. Detection by the dipstick assay does not require specialized instrumentation or highly qualified personnel. The proposed method could be a particularly useful tool in laboratories with limited resources and a basis for point-of-care diagnostics especially in combination with PCR amplification from whole blood.     

Molecular detection of Burkholderia cepacia in toiletry, cosmetic, and pharmaceutical raw materials and finished products

A polymerase chain reaction (PCR) assay was developed and compared with standard methods for rapid detection of Burkholderia cepacia, a major industrial contaminant, in cosmetic and pharmaceutical raw materials and finished products. Artificially contaminated samples were incubated for 24 h in trypticase soy broth containing 4% Tween 20 and 0.5% soy lecithin. DNA was extracted from each sample using a proteinase K-tris-EDTA-Tween 20 treatment at 35 degrees C. The extracted DNA was added to Ready-To-Go PCR beads and specific DNA primers for B. cepacia. The B. cepacia DNA primers coded for a 209-base pair (bp) fragment of the 16S rRNA ribosomal gene. No DNA amplification was observed in samples that were not spiked with B. cepacia. However, all contaminated samples showed the specific 209-bp fragment for B. cepacia. There was a 100% correlation between standard methods and the PCR assay. Standard microbiological methods required 5-6 days for isolation and identification of spiked microorganisms, whereas PCR detection and identification was completed in 27 h. PCR detection of B. cepacia allows for rapid quality evaluation of cosmetic and pharmaceutical raw materials and finished products.     

Multiple sample amplification and genotyping integrated on a single electronic microarray

We report a novel method that allows simultaneous in situ amplification and then genotyping of single nucleotide polymorphism (SNP) for multiple samples on a single electronic microarray. The locus coding for one of the common inherited thrombosis risk factors, Factor V Leiden (FVL), was chosen as a model system for SNP analysis. This method combines strand displacement amplification (SDA) with electrophoretic movement and concentration of DNA on electronic microarrays to provide a single platform for DNA amplification and analysis. The method includes: electronic anchoring of allele-specific SDA amplifiable primers (APs) and a nonamplifiable primer (NAP) to different electrodes, electronic hybridization of genomic DNA from different samples to those primers, in situ amplification of target DNA, and genotyping of FVL. Compared to previous anchored SDA methods, the addition of a NAP improves detection signals by at least 20-fold. The sensitivity of this method is dependent on the amplification time. Using this method, nine different genomic DNA samples with known FVL genotypes were amplified and correctly genotyped on a single electronic microarray without any contamination between samples. The present method could streamline development of nucleic acid-based assays in applications of molecular diagnostic, point-of-care testing, and forensic detection, which often require the capability to analyze multiple samples efficiently.     

Direct fluorescence detection of point mutations in human genomic DNA using microbead-based ligase chain reaction

This report has described a convenient genotyping method capable of detecting point mutations directly in human genomic DNA based on the combination of ligase chain reaction (LCR) and microbead-enrichment technique. LCR primers, including a biotin-labeled common primer and two fluorescence-labeled allele-specific primers, are designed for two alleles of a mutated site. When genomic DNA carries the mutated site, the common primer and allele-specific primer are ligated to form exponential amplified biotin-labeled fluorescence ligation products. These ligated products are enriched by streptavidin-coated microbeads, and genotypes are identified conveniently according to the fluorescence color of microbeads using fluorescent microscopy. Due to amplification of LCR process and enrichment of microbeads, the detection limit of the proposed method is as low as 10⁻¹⁵ mol/L templates. The method provides a convenient and simple strategy to detect point mutation directly in human genome. We have confirmed the efficiency of this approach with the identification of β-globin gene point mutation, which results in the reduced production of globin in an inherited hemoglobin disorder thalassemia disease.     

Pyrosequencing‐based strategy for a successful SNP detection in two hypervariable regions: HV‐I/HV‐II of the human mitochondrial displacement loop

Forensic analysis of mitochondrial displacement loop (D‐loop) sequences using Sanger sequencing or SNP detection by minisequencing is well established. Pyrosequencing has become an important alternative because it enables high‐throughput analysis and the quantification of individual mitochondrial DNAs (mtDNAs) in samples originating from more than one individual. DNA typing of the mitochondrial D‐loop region is usually the method of choice if STR analysis fails because of trace amounts of DNA and/or extensive degradation. The main aim of the present work was to optimize the efficiency of pyrosequencing. To do this, 31 SNPs within the hypervariable regions I and II of the D‐loop of human mtDNA were simultaneously analyzed. As a novel approach, we applied two sets of amplification primers for the multiplexing assay. These went in combination with four sequencing primers for pyrosequencing. This method was compared with conventional sequencing of mtDNA from blood and biological trace materials.     

微流控芯片电泳-多重聚合酶链反应法同时测定多个单碱基多态性位点

以微流控芯片电泳为检测平台,建立了多重PCR扩增法同时测定多个单碱基多态性(SNP)位点的方法。先通过PCR扩增得一段含所有待测SNP位点的长片段;用限制性内切酶消化成短片段,再将酶切反应产物与脱氧核糖核酸适配器(DNAadapter)相连;以连接产物为模板,分成两管,分别用n条等位基因特异性引物和一条通用引物进行n重PCR扩增;最后用微流控芯片电泳法分离PCR扩增产物,根据两管扩增产物的芯片电泳图谱中扩增片段的大小判断SNP的类型。以细胞色素P4502D6(CYP2D6)基因中的5个SNP位点(100C>T、1661G>C、1758G>T、2470T>C和2850C>T)为检测对象,考察了各等位基因特异性引物之间的相互影响和扩增反应的特异性,采用微流控芯片电泳法成功测定了20名健康中国人的CYP2D6基因中5个SNP位点的基因多态性,与聚合酶链反应-限制性片段长度多态性法(PCR-RFLP)测定结果完全一致。     

Universal fluorescent labeling of amplification products using locked nucleic acids

Amplification/hybridization‐based genetic analyses using primers containing locked nucleic acids (LNAs) present many benefits. Here, we developed a novel design for universal fluorescent PCR using LNAs. Universal fluorescent PCR generates intermediate nonlabeled fragments and final fluorescent fragments in a two‐step amplification process that uses locus‐specific primers with universal tails and universal fluorescent primers. In this study, a few standard nucleotides were replaced with LNAs only in the fluorescent universal primers. The sequence of the fluorescent universal primer significantly affected the amplification efficiency. For primers with three LNAs, the fluorescent primers with stable M13(‐47) sequences provided the most efficient signal (approximately tenfold higher than the primers with M13(‐21) sequences at lower Tm values). Moreover, AT‐rich LNA substitutions in the fluorescent primers produced much lower amplification efficiencies than GC‐rich substitutions. GC‐rich LNAs produced greater differences in Tm values among primers, and resulted in the preferential production of fluorescently labeled amplicons. The specificity and sensitivity of LNA‐containing fluorescent primers were assessed by genotyping eight STRs in Japanese individuals, and full STR profiles could be generated using as little as 0.25 ng of genomic DNA. The method permitted clear discrimination of alleles and represents sensitive STR genotyping at a reduced cost.     

Integrated massively parallel sequencing of 15 autosomal STRs and Amelogenin using a simplified library preparation approach

Massively parallel sequencing (MPS) technologies, also termed as next‐generation sequencing (NGS), are becoming increasingly popular in study of short tandem repeats (STR). However, current library preparation methods are usually based on ligation or two‐round PCR that requires more steps, making it time‐consuming (about 2 days), laborious and expensive. In this study, a 16‐plex STR typing system was designed with fusion primer strategy based on the Ion Torrent S5 XL platform which could effectively resolve the above challenges for forensic DNA database‐type samples (bloodstains, saliva stains, etc.). The efficiency of this system was tested in 253 Han Chinese participants. The libraries were prepared without DNA isolation and adapter ligation, and the whole process only required approximately 5 h. The proportion of thoroughly genotyped samples in which all the 16 loci were successfully genotyped was 86% (220/256). Of the samples, 99.7% showed 100% concordance between NGS‐based STR typing and capillary electrophoresis (CE)‐based STR typing. The inconsistency might have been caused by off‐ladder alleles and mutations in primer binding sites. Overall, this panel enabled the large‐scale genotyping of the DNA samples with controlled quality and quantity because it is a simple, operation‐friendly process flow that saves labor, time and costs.     

A multiplex SNP genotyping by allele‐specificspecific PCR based on stem‐loop and universal fluorescent primers of Chr1daxin mice

Single nucleotide polymorphisms (SNPs) are one of the most common markers in mammals. Rapid, accurate, and multiplex typing of SNPs is critical for subsequent biological and genetic research. In this study, we have developed a novel method for multiplex genotyping SNPs in mice. The method involves allele‐specific PCR amplification of genomic DNA with two stem‐loop primers accompanied by two different universal fluorescent primers. Blue and green fluorescent signals were conveniently detected on a DNA sequencer. We verified four SNPs of 65 mice based on the novel method, and it is well suited for multiplex genotyping as it requires only one reaction per sample in a single tube with multiplex PCR. The use of universal fluorescent primers greatly reduces the cost of designing different fluorescent probes for each SNP. Therefore, this method can be applied to many biological and genetic studies, such as multiple candidate gene testing, genome‐wide association study, pharmacogenetics, and medical diagnostics.     

Automated magnetic preparation of DNA templates for solid phase sequencing.

An integrated protocol for solid-phase DNA sequencing using a robotic work station is described involving magnetic separation of DNA and analysis of the sequencing product by electrophoresis with automated detection of the fluorescently labeled fragments. The method, which is based on magnetic beads in combination with streptavidin-biotin technology, can be used for sequencing both genomic and plasmid DNA. The DNA template is obtained by the polymerase chain reaction (PCR). Protocols to prepare five and ten immobilized samples is described, giving 10 and 20 single-stranded templates, respectively. The magnetic purification steps are performed in a microtiter plate and this allows for an integrated scheme involving a subsequent procedure for automated primer annealing and sequencing reactions. Here, the procedure is examplified by direct genomic sequencing of DNA in blood sample from a human immunodeficiency virus (HIV)-infected patient and a cloned human antibody DNA fragment using fluorescently labeled sequencing primers.     

Design of allele-specific primers and detection of the human ABO genotyping to avoid the pseudopositive problem

PCR experiments using DNA primers forming mismatch pairing with template lambda DNA at the 3' end were carried out in order to develop allele-specific primers capable of detecting SNP in genomes without generating pseudopositive amplification products, and thus avoiding the so-called pseudopositive problem. Detectable amounts of PCR products were obtained when primers forming a single or two mismatch pairings at the 3' end were used. In particular, 3' terminal A/C or T/C (primer/template) mismatches tended to allow PCR amplification to proceed, resulting in pseudopositive results in many cases. While less PCR product was observed for primers forming three terminal mismatch pairings, target DNA sequences were efficiently amplified by primers forming two mismatch pairings next to the terminal G/C base pairing. These results indicate that selecting a primer having a 3' terminal nucleotide that recognizes the SNP nucleotide and the next two nucleotides that form mismatch pairings with the template sequence can be used as an allele-specific primer that eliminates the pseudopositive problem. Trials with the human ABO genes demonstrated that this primer design is also useful for detecting a single base pair difference in gene sequences with a signal-to-noise ratio of at least 45.     

Electrochemical genosensor array for the simultaneous detection of multiple high-risk human papillomavirus sequences in clinical samples

An electrochemical genosensor array for the simultaneous detection of three high-risk human papillomavirus (HPV) DNA sequences, HPV16, 18 and 45, exhibiting high sensitivity and selectivity is presented. The electrodes of a 4 × 4 array were modified via co-immobilization of a 1:100 (mol/mol) mixture of a thiolated probe and an oligoethyleneglycol-terminated bipodal thiol. Detection of synthetic and PCR products was carried out in a sandwich type format, with the target hybridized between a surface immobilized probe and a horseradish peroxidase-labelled secondary reporter probe. The detection limits obtained in the detection of each individual target were in the pM range, allowing the application of this sensor for the detection of samples obtained from PCR amplification of cervical scrape samples. The results obtained exhibited an excellent correlation with the HPV genotyping carried out within a hospital laboratory. Multiplexing and cross-reactivity studies demonstrated high selectivity over potential interfering sequences, facilitating application of the developed platform for the high-throughput screening of multiple high-risk DNA sequences.     

Genotyping of single nucleotide polymorphisms by primer extension reaction and a dual-analyte bio/chemiluminometric assay

Primer extension reaction (PEXT) is the most widely used approach to genotyping of single nucleotide polymorphisms (SNP). It is based on the high accuracy of nucleotide incorporation by the DNA polymerase. We propose a dual-analyte bio/chemiluminometric method for the simultaneous detection of the PEXT reaction products of the normal and mutant allele in a high sample-throughput format. PCR-amplified DNA fragments that span the SNP of interest are subjected to two PEXT reactions using normal and mutant primers in the presence of digoxigenin-dUTP and biotin-dUTP. Both primers contain a d(A)₃₀ segment at the 5′-end but differ in the final nucleotide at the 3′-end. Under optimized conditions only the primer that is perfectly complementary with the interrogated DNA will be extended by DNA polymerase and lead to a digoxigenin- or biotin-labeled product. The products of the PEXT reactions are mixed, denatured, and captured in microtiter wells through hybridization with immobilized oligo(dT) strands. Detection is performed by adding a mixture of antidigoxigenin–alkaline phosphatase (ALP) conjugate and a streptavidin–aequorin conjugate. The flash-type bioluminescent reaction of aequorin is triggered by the addition of Ca²⁺. ALP is then measured by adding the appropriate chemiluminogenic substrate. The method was evaluated by genotyping two SNPs of the human mannose-binding lectin gene (MBL2) and one SNP of the cytochrome P450 gene CYP2D6. Patient genotypes showed 100% concordance with direct DNA sequencing data.     

Whole genome amplification induced bias in the detection of KRAS‐mutated cell populations during colorectal carcinoma tissue testing

Whole genome amplification replicates the entire DNA content of a sample and can thus help to circumvent material limitations when insufficient DNA is available for planned genetic analyses. However, there are conflicting data in the literature whether whole genome amplification introduces bias or reflects precisely the spectrum of starting DNA. We analyzed the origins of discrepancies in KRAS (Kirsten rat sarcoma viral oncogene homolog gene) mutation detection in six of ten samples amplified using the GenomePlex® Tissue Whole Genome Amplification kit 5 (WGA5; Sigma‐Aldrich, St. Louis, MO, USA) and KRAS StripAssay® (KRAS SA; ViennaLab Diagnostics, Vienna, Austria). We undertook reextraction, reamplification, retyping, authentication, reanalysis, and reinterpretation to determine whether the discrepancies originated during the preanalytical, analytical, and/or interpretative phase of genotyping. We conclude that a combination of glass slide/sample heterogeneity and biased amplification due to stochastic effects in the early phases of whole genome amplification (WGA) may have adversely affected the results obtained. Our findings are relevant for both forensic genetics testing and massively parallel sequencing using preamplification.     

Non‐hybridization single nucleotide polymorphism detection and genotyping assay through direct discrimination of single base mutation by capillary electrophoretic separation of single‐stranded DNA

The significant demands for single nucleotide polymorphism detection and genotyping assays have grown. Most common assays are based on the recognition of the target sequence by the hybridization with its specific probe having the complementary sequence of the target. Herein, a simple, label‐free, and economical non‐hybridization assay was developed for single nucleotide polymorphism detection and genotyping, based on the direct discrimination of single base mutation by simple capillary electrophoresis separation for single‐stranded DNA in an acidic electrophoretic buffer solution containing urea. Capillary electrophoresis separation of single‐base sequential isomers of DNA was achieved due to charge differences resulting from the different protonation properties of the DNA bases. Single nucleotide polymorphism detection and genotyping were achieved by discriminating the electropherogram pattern change, that is, peak number in the electropherogram, obtained by the proposed method. The successful practical application of the proposed method was demonstrated through single nucleotide polymorphism detection and genotyping on a known gene region of 84‐mer, in which guanine to adenine single‐base mutation is commonly observed, using a human hair sample in combination with genomic DNA extraction, polymerase chain reaction amplification, DNA purification from polymerase chain reaction products, and capillary electrophoresis separation.     

Rapid genotyping of CYP2D6, CYP2C19 and TPMT polymorphisms by primer extension reaction in a dipstick format

In recent years an increasing amount of interest has been directed at the study and routine testing of polymorphisms responsible for variations in drug metabolism. Most of the current methods involve either time-consuming electrophoresis steps or specialized and expensive equipment. In this context, we have developed a rapid, simple and robust method for genotyping of CYP2D6*3, CYP2D6*4, CYP2C19*2, CYP2C19*3 and TPMT*2 single nucleotide polymorphisms (SNP). Genomic DNA is isolated from whole blood and the segments that span the SNP of interest are amplified by PCR. The products are subjected directly (without purification) to two primer extension (PEXT) reactions (three cycles each) using normal and mutant primers in the presence of biotin-dUTP. The PEXT primers contain a (dA)₃₀ segment at the 5′ end. The PEXT products are detected visually by a dry-reagent dipstick-type assay in which the biotinylated extension products are captured from immobilized streptavidin on the test zone of the strip and detected by hybridization with oligo(dT)-functionalized gold nanoparticles. Patient samples (76 variants in total) were genotyped and the results were fully concordant with those obtained by direct DNA sequencing.     

Improved adapter-ligation-mediated allele-specific amplification for multiplex genotyping by using software

Adapter-ligation-mediated allele-specific amplification (ALM-ASA) is a potential method for multiplex SNPs typing at an ultra low cost. Here, we describe a kind of software, which designs allele-specific primers for ALM-ASA assay on multiplex SNPs. DNA sequences containing SNPs of interest are submitted into the software which contains various endonucleases for options. Based on the SNP sequence information and the selected endonucleases, the software is capable of automatically generating sets of information needed to perform genotyping experiments. Each set contains a suitable endonuclease, qualified allele-specific primers with orientations and melting temperatures, sizes of allele-specific amplicons, and gel electropherograms simulated according to the sizes of the allele-specific amplicons and the mobility of DNA fragments in 2% agarose gel. Seven SNPs in the arylamines N-acetyltransferase 2 (NAT2) gene, five SNPs in the BRCA1 gene, five SNPs in the COMT gene, six SNPs in the CYP2E1 gene, five SNPs in the MPO gene, and six SNPs in the NRG1 gene were selected for evaluating the software. Without extra optimization, seven SNPs in the NAT2 gene were successfully genotyped for genomic DNA samples from 127 individuals by using the first set of allele-specific primers yielded by the software. Although several steps are used in the ALM-ASA assay, the whole genotyping process can be completed within 3 h by optimizing each step. Profiting from the software, the ALM-ASA assay is easy-to-perform, labor-saving, and accurate.     

Determining restriction digest efficiency using the SNaPshot single-base extension method and CE

Incomplete restriction endonuclease digestion may cause complications during particular applications, where any undigested product may interfere with genotyping accuracy, cloning efficiency or PCR amplification. In some instances it may be useful to measure the amount of undigested DNA remaining in the sample, allowing redigestion or elimination of unsuitable samples. A single-base extension SNP genotyping method (SNaPshot, Applied Biosytems) was adapted to interrogate restriction sites and their digestibility. The digested DNA was amplified by nested PCR to specifically amplify sections containing the restriction sites of interest. Single interrogation primers, terminating immediately 5' of the cleavage site, were used in conjunction with the SNaPshot multiplex system and CE to detect intact, amplifiable product remaining in the digest. This method detected as little as 10 pg of intact DNA, within a larger proportion of digested DNA. Across two different restriction enzymes, the amount remaining undigested was found to be dependent on the amount of DNA, ranging from 0.08% with 200 ng to 1.25% with 600 ng.