Formation of solvate structures by the <Emphasis Type="Italic">ortho</Emphasis>-, <Emphasis Type="Italic">meta</Emphasis>-, and <Emphasis Type="Italic">para</Emphasis>-isomers of hydroxybenzoic acid in supercritical fluid

The solvate structures formed by the ortho-, meta-, and para-isomers of hydroxybenzoic acid (o-HBA, m-HBA, and p-HBA) with a polar co-solvent (methanol at a concentration of 0.030 and 0.035 mole fractions) in supercritical carbon dioxide at a constant density of 0.7 g/cm³ and temperatures of 318 and 328 K have been studied by the classic molecular dynamics. It has been determined that a stable hydrogen-bonded complex with the co-solvent forms via the hydrogen of the carboxyl group for all isomers. The probability of this complex existence is high at all temperatures and concentrations. In the o-HBA molecule, the other functional groups are engaged in the intramolecular hydrogen bond, but not involved in interactions with methanol. It has been found that m-HBA and p-HBA can be involved in hydrogen bonds with methanol via hydroxyl hydrogen and oxygen atoms; they are characterized by the presence of one more co-solvent molecule (rarely, two molecules) in their solvation shell and intermittent formations/breakages of hydrogen bonds via other functional groups. These bonds are far less stable, and their formation is sensitive to change of temperature and co-solvent concentration. It has been concluded that the degree of selective solvation of m-HBA and p-HBA by co-solvent molecules is approximately the same, but the rate of structural rearrangements in the nearest environment of m-HBA is higher than that of p-HBA.     

Compositions and structures of nanoparticles of pentagonal axial symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>5<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

The method of determination of the structure and the number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group has been developed. The formulas for the calculation of the number of particles with symmetry group D _5d are reported. The number of particles in these shells is determined by three structurally invariant numbers and the “quantum number” of the group order n. The classification of all possible nanostructures with symmetry group D _5d is given: C _θ+10z , z = 0, 1, 2, …, where the basic shells are C _θ = C ₂, C ₁₀, C ₁₂. The sum rule has been obtained for the coordination numbers of shell sites located at symmetry axes. Pentagonal axial nanoparticles are shown to be the initial shells for obtaining (5,5) and (10,10) armchair nanotubes or (5,0) and (10,0) zigzag nanotubes. The general formula of these nanotubes closed with icosahedral and dodecahedral caps is N _20+10p , N _60+10p (p = 1, 2, …). The graphical constructions of all classes of nanoparticles and nanotubes of the pentagonal axial type are reported.     

Resonant photoemission and absorption spectroscopy study of the Cu<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>TiSe<Subscript>2</Subscript> electronic structure

The Cu3p and Cu2p resonance photoelectron spectra of the valence bands and core levels as well as Ti and CuL _2,3 absorption spectra for monocrystals 1T-Cu _x TiSe₂ were studied. The valence spectra obtained at Cu3p and Cu2p resonance drastically differ from each other. For Cu 3p-3d resonance, there are several bands corresponding to different channels of excited state decay. Spectra of the valence bands at Cu 2p-3d resonance are virtually identical to the spectra of pure TiSe₂. As follows from the absorption spectra, titanium atoms have the oxidation state 4+, whereas copper atoms are close to the free ion state.     

Compositions and structures of nanoparticles of trigonal symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>3<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

A method has been developed for the determination of the structure and number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group. The formulas for calculation of the number of particles of symmetry D _3d have been reported. It has been shown that the number of atoms in trigonal shells is determined by three structurally invariant numbers and the quantum number of the group order n. All possible nanostructures of symmetry D _3d have been classified: C_{θ + 6z} , z = 0, 1, 2, ..., where the basic shells are C_θ = C₆, C₈, and C₁₄. A sum rule has been obtained for the coordination numbers of the shell sites located on symmetry axes. Trigonal nanoparticles are parent ones for obtaining (3,0), (6,0), and (9,0) nanotubes of trigonal type. The general formulas of these nanotubes with icosahedral, dodecahedral, and cubic caps are N_{8 + 12p} , N_{20 + 24p} , and N_{60 + 36p} (p = 1, 2, ...), respectively. The graphical constructions of all classes of trigonal nanoparticles and nanotubes are reported.     

Graphene oxide promoted synthesis of <Emphasis Type="Italic">p</Emphasis>-phenylenediamine antioxidants

Three p-phenylenediamine antioxidants (p-phenylenediamine-N,N,N′,N′-tetrapropionic acid tetramethyl ester, p-phenylenediamine-N,N,N′-tripropionic acid trimethyl ester, and p-phenylenediamine-N, N′-dipropionic acid dimethyl ester) were successfully synthesized via atom-economic aza-Michael addition of pphenylenediamine to methyl acrylate p-romoted by graphene oxide in water. The synthesized compounds were characterized by NMR, ESI-MS spectra, and elemental analyses. The effects of the solvent and graphene oxide on the reaction were investigated.     

X-ray diffraction and thermodynamic characteristics for tellurite of the composition Li<Subscript>2</Subscript>CeTeO<Subscript>5</Subscript>

Tellurite of the composition Li₂CeTeO₅ is synthesized by solid-phase method from cerium(IV) and tellurium(IV) oxides and lithium carbonate. The type of syngony, the unit cell parameters, and the compound’s X-ray and pycnometry densities are determined via X-ray diffraction analysis. The isobaric heat capacity of lithium–cerium tellurite is studied by means of dynamic calorimetry in the temperature range of 298.15–673 K; the results serve as the basis for deriving C _p ^° ~ f(T) dependency equations and determining the compound’s thermodynamic functions. λ-shaped anomalous effects, due probably to Type II phase transitions, are found on the C _p ^° ~ f(T) dependence.     

Hall effect,electrical and magnetic resistance in Cd<Subscript>3</Subscript>As<Subscript>2</Subscript> + MnAs (30%) composite at high pressures

Electrical resistivity ρ, Hall factor R _H, magnetic resistance (R _m–R ₀)/R ₀, and magnetic-field-dependent resistances were measured in 70 mol % Cd₃As₂ + 30 mol % MnAs composite at fixed values of high hydrostatic pressures (up to p ≤ 9 GPa). The ρ, R _H, and (R _m–R ₀)/R ₀ versus pressure curves feature a phase transition at p = 4–4.3 GPa. Field-dependent magnetic resistance features a negative pressure-induced trend.     

<Emphasis Type="Italic">Ab initio</Emphasis> quantum-chemical study of vinylation of pyrrole and 2-phenylazopyrrole with acetylene in a KOH/DMSO system

Interaction between pyrrole and its 2-vinyl, 2-azo, and 2-phenylazo derivatives with acetylene in the gas phase and DMSO was studied using the MP2/6-311++G**//MP2/6-31G* ab initio approach and including the solvation effects within the framework of the continuum model. Possible reasons are considered for the hindered character of direct vinylation of azopyrroles with acetylene in superbasic media. The introduction of the azo group in the 2 position of the pyrrole ring leads to the increased stability of the pyrrole anion and increased acidity from pK _a = 22.1 for pyrrole and pK _a = 20.5 for vinylpyrrole to pK _a = 16.6 and 16.4 for 2-azopyrrole and 2-phenylazopyrrole, respectively. The binding energy between the pyrrole anion and the acetylene molecule decreases concurrently. The heat of formation of the pyrrole anion adducts with acetylene changes from ΔH = 4.8 kcal/mol for pyrrole to ΔH = 22.4 kcal/mol for 2-phenylazopyrrole. For all anion adducts under study, preferable isomers are Z isomers formed by the interaction of pyrrole anions with the cis-distorted acetylene molecule, but the formation of the E isomers corresponds to a lower activation barrier, which explains known Z stereoselectivity of the nucleophilic addition to monosubstituted acetylenes. When an azo group is introduced, the reaction becomes more endothermal, and the energy barriers to the formation of both Z and E isomers increase. Among other reasons for lowering of the activity of 2-arylazopyrroles during vinylation we consider possible reaction of acetylene addition at the most remote nitrogen atom of the azo group and participation of the anion center in cation chelation (K⁺ in the calculation).     

Ab Initio Theoretical Studies on the Kinetics of Hydrogen Abstraction Type Reactions of Hydroxyl Radicals with CH<Subscript>3</Subscript>CCl<Subscript>2</Subscript>F and CH<Subscript>3</Subscript>CClF<Subscript>2</Subscript>

The hydrogen abstraction reactions from CH₃Cl₂F (R-141b) and CH₃CClF₂ (R-142b) by OH radicals are studied theoretically by semi-classical transition state theory. The stationary points for the reactions are located by using KMLYP density functional method along with 6-311++G(2d,2p) basis set and MP2 method along with 6-311+G(d,p) basis set. Single-point energy calculations are performed by the CBS-Q and G4 combination methods on the geometries optimized at the KMLYP/6-311++G(2d,2p) level of theory. Vibrational anharmonicity coefficients, x _ij , which are needed for semi-classical transition state theory calculations, are computed at the KMLYP/6-311++G(2d,2p) and MP2/6-311+G(d,p) levels of theory. The computed barrier heights are slightly sensitive to the quantum-chemical method. Thermal rate coefficients are computed over the temperature range from 200 to 2000 K and they are shown to be in accordance with available experimental data. On the basis of the computed rate coefficients, the tropospheric lifetime of the CH₃CCl₂F and CH₃CClF₂ are estimated to be about 6.5 and 12.0 years, respectively.     

High-pressure defect phase La<Subscript>x</Subscript>Cu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

Perovskite-like nonstoichiometric oxide La _x Cu₃V₄O₁₂ (space group Im \(\bar 3\), Z = 2, a = 7.313–7.354 Å) with cation-site vacancies has been prepared for the first time at high pressures (p = 6.0–8.0 GPa) and high temperatures (T = 700–1100°C). The compound has metal-type conductivity and paramagnetic properties, and undergoes a phase transition.     

Structure Studies of the Extracellular Polysaccharide from <Emphasis Type="Italic">Trichoderma</Emphasis> sp. KK19L1 and Its Antitumor Effect via Cell Cycle Arrest and Apoptosis

An extracellular polysaccharide TP1A was purified from the fermented broth of Trichoderma sp. KK19L1 by combination of Q Sepharose fast flow and Sephacryl S-300 chromatography. TP1A was composed of Man, Gal, and Glc in a molar ratio of about 3.0:5.1:8.1. The molar mass of TP1A was about 40.0 kDa. Methylation and NMR analysis indicated that the probable structure of TP1A was [→4,6)-α-D-Glcp(1→6)-β-D-Galf(1→6)-β-D-Galf(1→2,6)-β-D-Galf(1→2,6)-β-D-Galf(1→2,6)-β-D-Galf(1→2,6)-α-D-Manp(1→2,6)-α-D-Manp(1→] with [α-D-Glcp(1→] and [α-D-Manp(1→6)-α-D-Glcp(1→6)-α-D-Glcp(1→] as branches. The antitumor study showed that TP1A was able to inhibit the cell viability of HeLa and MCF-7 cells. TP1A could arrest HeLa cells in G2/M phase and induce HeLa cell apoptosis. These findings suggest that fungal polysaccharides could be a potential source for antitumor agents.     

High-pressure defect phase Nd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

A perovskite-like oxide Nd _x Cu₃V₄O₁₂ (space group Im \(\bar 3\) Z = 2, a = 7.278–7.322 Å) with cationic vacancies was prepared for the first time under triaxial compression of p = 6.0–9.0 GPa at 700–1300°C. The compound has a metal-type conductivity, paramagnetic properties, and a phase transition.     

Investigation of Solution p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> and Thermodynamic Values of Lamivudine and Pefloxacin Drugs by Ab initio and DFT Methods

In this work we investigate the thermodynamic properties and pK_a value of lamivudine and pefloxacin drugs, in aqueous solutions, by ab initio and density functional theory (DFT) methods at different temperatures. Molecular structures and solute–solvent effects of the anions, cations, and neutral molecules of lamivudine and pefloxacin were studied by the polarizable continuum model (PCM). The calculation was done at the DFT-B3LYP/6-31+G(d) level of theory using Tomasi’s method to analyze the formation of intermolecular hydrogen bonds (IHB) in aqueous solution. The pK_a1 values of lamivudine and pK_a2 values of pefloxacin increase with temperature increase. In contrast, the pK_a1 values of pefloxacin decrease when the temperature increases. Further, the thermodynamic properties of the ionization processes (?H, ?S and ?G) of the drugs in aqueous solution were determined and discussed. The results of this work are in good agreement with the literature data at 298.15 K.     

X-ray diffraction study of CsZn<Subscript>2</Subscript>Br<Subscript>5</Subscript>

CsZn₂Br₅ crystals are studied by X-ray diffraction. The compound crystallizes in the monoclinic system with the unit cell parameters a = 6.8880(12) Å, b = 10.4703(19) Å, c = 6.5197(9) Å, β = 108.25°, V = 446.55 ų, ρ_calcd = 4.960 g/cm³. Refractive indices are n _p = 1.640 and n _p = 1.754.     

Degradation mechanism of <Emphasis Type="Italic">p</Emphasis>-cresol in aqueous solutions by gamma-ray irradiation

Degradation mechanism of p-cresol in aqueous solutions by gamma-ray irradiation was investigated at various initial p-cresol concentrations with different absorbed doses. The results show that p-cresol in aqueous solutions can effectively be degraded by gamma-ray irradiation. Chemical oxygen demand was used to assess the degree of mineralization of p-cresol. The degradation can be enhanced by the additions of free Radical Scavengers. The degradation products were identified by high-performance liquid chromatography with tandem mass spectrometric. Degradation mechanism of p-cresol in aqueous solutions were proposed according to the products analysis.     

Preparation,crystal structure and mechanism of thermal decomposition of complex [Dy(<Emphasis Type="Italic">p</Emphasis>-MOBA)<Subscript>3</Subscript>Phen]<Subscript>2</Subscript>

1,10-Phenanthrolinetris(4-methoxybenzoate)dysprosium, Dy(p-MOBA)₃Phen (where p-MOBA = p-methoxybenzoate and Phen = 1,10-phenanthroline), (I) has been synthesized. The complex was characterized by various techniques including elemental analysis, UV, IR, XRD, molar conductance, and TG-DTG. The crystals consist of binuclear molecules and monoclinic, space group P2 ₁/n: a = 14.143(6) Å, b = 17.550(7) Å, c = 14.493(6) Å, β = 117.357(4)°, Z = 2, ρ _c = 1.655 g cm^?3, F(000) = 1588; R ₁ = 0.0176, wR ₂ = 0.0455. In the complex, each Dy³⁺ ion is nine-coordinate to one 1,10-phenanthroline molecule, one bidentate chelating carboxylate group, and four bridging carboxylate groups in which the carboxylate groups are bonded to the Dy³⁺ ions in three modes: bridging bidentate, bridging tridentate, and chelating bidentate. The thermal decomposition mechanism of I has been determined on the basis of thermal analysis. In addition, the lifetime equation at a weight-loss of 10% was deduced as lnτ = ?28.8361 + 19478.37/T by isothermal thermogravimetric analysis.     

Thermodynamics of the complexation of arabinogalactan with salicylic and <Emphasis Type="Italic">p</Emphasis>-aminobenzoic acids in aqueous solutions

The thermodynamics of complexation of arabinogalactan with salicylic and p-aminobenzoic acids in aqueous solutions is studied by means spectroscopy. The standard thermodynamic characteristics (ΔH°; ΔG°; ΔS°) of complexation are calculated.     

Synthesis of Bisthiacalix[4]arene: Reaction of Piperazine with Monoacrylamide Derivative of <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-Butylthiacalix[4]arene

The reaction of acryloyl chloride with the monoamine derivative of p-tert-butylthiacalix[4]arene was used to synthesize p-tert-butylthiacalix[4]arene monoacrylamide in the 1,3-alternate conformation. The effect of the nature of the amine on the result of its Michael reaction with the synthesized p-tert-butylthiacalix[4]arene monoacrylamide was studied. The latter was reacted with piperazine to obtain bisthiacalix[4]arene with the macrocyclic fragments in the 1,3-alternate conformation.     

High-temperature heat capacity and thermodynamic properties of pyrovanadate Pb<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> and orthovanadate Pb<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The heat capacities of Pb₂V₂O₇ and Pb₃(VO₄)₂ as a function of temperature in the range 350–965 K have been studied by the differential scanning calorimetry method. The C_P = f(T) curve for Pb₂V₂O₇ is described by the equation C_p = (230.76 ± 0.51) + (73.60 ± 0.50)×10^-3T ? (18.38 ± 0.54)×10⁵T^-2 in the entire temperature range. For Pb₃(VO₄)₂, there is a well-pronounced extreme point in the C_P = f(T) curve at T = 371.5 K, which is caused by the existence of a structural phase transition. The thermodynamic properties of the oxide compounds have been calculated.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.