Chromatographic methods for large-scale preparation of immunoglobulin G2a monoclonal antibodies Lym-1 and TNT-1 F(ab')2 fragments

Lym-1 and TNT-1 are two murine immunoglobulin G2a monoclonal antibodies (MAbs) which have been used for clinical trials in cancer patients. This paper describes methods for large-scale preparation of F(ab')2 fragments from 50 mg to 4 g of MAbs Lym-1 and TNT-1. Digestion of MAbs with pepsin was optimized and performed at pH 3.8, a pepsin/antibody ratio of 1:250, and 3-4 h of incubation at 37 degrees C. The F(ab')2 fragments were purified by tandem column procedures using fast protein liquid chromatography. Quality control analyses of the products included protein purity, isoelectric point, immunoreactivity, and endotoxin level. The results revealed that the chromatographic procedures are practical, simple, and effective, and can be used to produce gram quantities of clinical-grade F(ab')2 fragments for the diagnosis of cancer in patients.     

Direct identification of a novel disulfide bond linkage system of new isolated isomer (isomer V) in recombinantly produced h-IGF-I

Insulin-like growth factor I (IGF-I or somatomedin C) is a serum polypeptide with three intramolecular disulfide bonds. In the course of synthesis by the recombinant DNA method, three disulfide bond isomers, all of which have Cys18-Cys61 with three combinations of two disulfide bonds formed by Cys6, Cys47, Cys48 and Cys52, were identified. Natural type, isomer II, was proved to have a Cys6-Cys48, Cys18-Cys61, Cys47-Cys52 disulfide bond system. Now, the fourth isomer, isomer V which doesn't have Cys18-Cys61 disulfide, has been isolated, and its novel disulfide bond linkage system was identified by a chemical synthetic method. The supposed conformation constrained in 3D structure for isomer V would be discussed for its biological activity.     

Capillary gel electrophoresis of oligonucleotides using polymer solutions

Summary Capillary gel electrophoresis (CGE) has been recognized as an effective method for the analysis of oligonucleotides. CGE using polymer solutions is especially useful and effective compared with that using crosslinked gels, because of easy change of media. Replacement of media leads to the reproducible separation of analytes. We have investigated CGE analysis of oligonucleotides of less than 20 bases employing various kinds of polymers. Polyacrylamide, dextrin, dextran, pullakin, and poly(ethylene glycol) were used as sieving matrixes at concentrations of 0–30 %. Polydeoxythymidylic acids [p(dT)_11–20] were used as a test sample. These small oligonucleotides were successfully resolved on the basis of their base number by CGE using some of these polymer solutions. In particular, dextran was found to be effective and baseline separation was observed when a 30 % dextran solution was employed. Some validations such as linearity and reproducibility were also established and this method was found to be an adequate quality control method for small oligonucleotides. Finally, CGE using a 30 % dextran solution was successfully applied to impurity profiling of some synthetic oligonucleotides.     

毛细管气相色谱法测定二乙基二硫的含量

采用毛细管气相色谱法(GC)测定了二乙基二硫的含量.结果表明,二乙基二硫含量在0.01⁰.4g/L范围内具有良好的线性关系,平均回收率为99.91%;该方法简便、准确、重复性好,可方便地用于二乙基二硫含量的测定.     

Electrokinetic analyte transport assay for alpha-fetoprotein immunoassay integrates mixing, reaction and separation on-chip

A rapid and highly sensitive CE immunoassay method integrating mixing, reaction, separation, and detection on-chip is described for the measurement of alpha-fetoprotein (AFP), a liver cancer marker in blood. Antibody-binding reagents, consisting of 245-bp DNA coupled anti-AFP WA1 antibody (DNA-WA1) and HiLyte dye-labeled anti-AFP WA2 antibody (HiLyte-WA2), and AFP-containing sample were filled into adjacent zones of a chip channel defined by the laminar flow lines of the microfluidic device using pressure-driven flow. The channel geometry was thus used to quantitatively aliquot the reagents and sample into the chip. DNA-WA1 was electrokinetically concentrated in the channel and sequentially transported through the AFP-sample zone and HiLyte-WA2 zone by ITP in such a manner that the AFP sandwich immune complex formation took place in the sample and HiLyte-WA2 zones. The sandwich AFP immune complex was then detected by LIF after CGE in a separation channel that was arranged downstream of the reaction channel. AFP was detected within 136 s with a detection sensitivity of 5 pM. The on-chip immunoassay described here, applying ITP concentration, in-channel reaction, and CGE separation, has the potential of providing a rapid and sensitive method for both clinical and research applications.     

Optimization of CE-SDS Method for Antibody Separation Based on Multi-Users Experimental Practices

Capillary Electrophoresis-Sodium Dodecyl Sulfate (CE-SDS) method with UV detection was developed and satisfactorily used for determination of purity and manufacturing consistency of a monoclonal antibody (MAb) at Amgen Inc. (Seattle, WA). When this method was applied to some other MAbs, several problems with method robustness became apparent. These issues resulted in abnormal Electropherogram (e-gram) profiles potentially linked to various parameters specific molecules analyzed, sample formulation buffer composition, CE-SDS gel matrix type, and operators. A multi-users interest group (called CE Users Forum) was formed to systematically investigate and understand these issues. The CE Users Forum first identified the issues which needed resolution, defined group experiments to better understand the problem and to test potential solutions, and together defined a generic (platform) CE-SDS method for MAbs. Two CE instruments, Agilent HP^3DCE and Beckman PA 800, two CE-SDS gel matrices, BioRad and Beckman gels, as well as different types of MAbs in various buffers were used in this investigation. We present here a platform CE-SDS method for purity determination of MAbs. Method optimization and trouble-shooting procedures by the CE Users Forum played a key role in delivering a robust analytical method for characterization of antibodies by improving instrumental and experimental parameters such as instrument variability, instrument operating parameters, operator training, and reagent stability. The optimized CE-SDS method is used during process development and has been transferred to the quality control (QC) lab as a purity assay for lot release testing of therapeutic antibodies. Any trained analyst can successfully perform this method. A group such as the CE Users Forum is a good way to integrate best practices and solve technical issues in a cooperative environment.Presented at: CE in the Biotechnology & Pharmaceutical Industries: 7th Symposium on the Practical Applications for the Analysis of Proteins, Nucleotides and Small Molecules, Montreal, Canada, August 12–16, 2005     

Mapping of viral epitopes with conformationally specific monoclonal antibodies using biosensor technology.

An automated biosensor system (BIAcore) designed for measuring molecular interactions in real time and without labelling any of the reactants was used for mapping the epitopes of tobacco mosaic virus protein using conformationally specific monoclonal antibodies (MAbs). Some of the MAbs used as capturing antibody on the sensor chip allowed a conformational change to occur in the viral protein. As a result, MAbs specific for the quaternary structure of polymerized viral protein were able to bind to monomeric viral subunits. Compared with classical solid-phase enzyme immunoassay, the biosensor technology possesses several advantages for epitope mapping of viral proteins.     

Capillary electrophoresis for analysis of deletion and duplication in exon 44–55 of Duchenne muscular dystrophy gene

In this study, a genotyping CGE method was established for analysis of Duchenne muscular dystrophy (DMD) gene deletions and duplications in exon 44–55. A total of 12 DMD exons (exon 44–55) and 2 internal standard gene fragments were simultaneously amplified by using a universal multiplex PCR (UMPCR) and determined by CGE. The conditions of UMPCR and CGE were optimized, including the kinds of polymerase, temperatures in UMPCR, separation matrix, separation temperature, and voltage. Finally, the separation was performed by 1.2% poly(ethylene oxide) in 1× TBE buffer at ?6 kV and 25°C. After validation, our results showed the peak patterns for differentiation of genetic deletion or duplication in 27 DMD patients and normal subjects, according to the peak height ratios by comparison of two internal standard peaks. Among the 27 subjects, 23 cases are deletion type and four are duplication type. The data of two patients analyzed by this CGE‐PCR method were different from that of multiplex ligation dependent probe amplification method, and the sequencing results demonstrated that our results were correct. This UMPCR‐CGE method was considered better than the multiplex ligation dependent probe amplification method. Furthermore, this method can be used for eugenics in clinical applications.     

A fluorescent derivatization method of proteins for the detection of low‐level impurities by microchip capillary gel electrophoresis

A novel pre‐chip fluorescent derivatization method is presented for protein sizing and quantification by microchip CGE. The derivatization reaction employed a water‐soluble and stable fluorescent dye and was performed under conditions that favored the formation of homogeneous reaction products. The method delivered in terms of protein sizing similar results as microchip CGE with on‐chip staining but showed an extended linear dynamic range for protein quantification encompassing four orders of magnitude. The sensitivity of the method was similar to standard silver‐stained planar gels. The characterization of derivatization reaction products by MS and preparative isoelectric focusing indicated that a constant degree of dye molecule tagging was obtained over a broad range of protein/dye ratios. The method allowed detecting and quantifying an impurity spiked into an antibody preparation down to a level of 0.05%. Advantages of this method compared with CGE approaches with pre‐column derivatization include a shorter analysis time and an increased robustness and ease of use.     

Establishment and validation of a microfluidic capillary gel electrophoresis platform method for purity analysis of therapeutic monoclonal antibodies

Capillary and microfluidic chip electrophoresis technologies are heavily utilized for development, characterization, release, and stability testing of biopharmaceuticals. Within the biopharmaceutical industry, CE‐SDS and M‐CGE are commonly used for purity determination by separation and quantitation of size‐based variants. M‐CGE is used primarily as an R&D tool for product and process development, while cGMP release and stability testing applications are commonly reserved for CE‐SDS. This paper describes the establishment of an M‐CGE platform method to be used for R&D and cGMP applications, including release and stability testing, for monoclonal antibodies. The M‐CGE platform method enables testing for product development support and cGMP release and stability using the same method, and utilization of one CE technology for the entire lifecycle of a biopharmaceutical product. Critical method parameters were identified, and the analytical design space of those critical parameters was defined using design of experiments (DOE) studies. Once defined through DOE studies, the method design space was validated according to ICH Q2 (R1) guidelines. Additional molecules of the same validated class were verified for use in the method by experimental confirmation of accuracy, specificity, and stability indicating capabilities. The platform method model facilitates rapid utilization of the method in development and GMP testing environments, and eliminates the need for individual validations for assets of the same class entering early stage development.     

Detection of volatile organic sulfur compounds in water by headspace gas chromatography and membrane inlet mass spectrometry

Two gas chromatographic methods, GC-FID (flame ionization detection) and GC-ELCD (electrolytic conductivity detector) are compared in tlie analysis of volatile organic sulfur compounds (VOSCs) in water samples with a membrane inlet mass spectrometry (MIMS) technique. Carbon disulfide, ethanethiol, dimethyl sulfide, ethyl-methyl sulfide, thiophene, and dimethyl disulfide were used as test compounds. Linear dynamic ranges were found to be two decades with the GC-ELCD method and four decades with the GC-FID and MIMS methods. Detection limits were at low (μg/1 levels with the two gas chromatographic methods and clearly below μg/1 level with the MIMS method. Analysis of one sample takes 40 min with the gas chromatographic methods and five minutes with the MIMS method. The selectivity was good, especially with the GC-ELCD and the MIMS method. In addition, quantitative results obtained with spiked water samples by the three methods are compared.     

胰岛素反相制备色谱的方法开发

以胰岛素反相制备色谱方法的开发和优化为目标,通过考察色谱保留参数、峰展宽及样品流出曲线的浓度分布等色谱参数,对流动相梯度、色谱填料、载样量等色谱条件进行了优化,并建立了胰岛素制备色谱峰参数的描述方法。结果表明,所建立的方法可快速筛选出最适于胰岛素分离的色谱条件(包括流动相梯度及分离填料),即流动相中的强洗脱溶剂(有机相)需采取缓梯度窄区间的变化条件,筛选出的分离填料需具备峰向两侧展宽且展宽程度较小、样品最高浓度居中分布的特点。将方法用于实际胰岛素粗品的纯化制备,获得了杂质去除效果好、胰岛素纯度高的产品。该法为胰岛素反相色谱纯化制备方法的快速建立提供了指导,具有较强的实用价值,同时为发展大分子化合物的制备色谱方法提供了参考。     

Chromatography Liquide a Haute Pression DE Colorants Alimentaires Synthetiques

Abstract

The synthetic food dyes separation is described using the paired-ion chromatography. The method used allows the separation of the most permitted food colours and the orange GGN (CI 15980). Differentiation of this dye from its isomer, the sunset yellow (CI 15985), using the usual chromatographic methods still now remains unsuccessful.     

基于Nafion聚合物的气相色谱固定相的分离性能研究

该文以Nafion膜为固定相,采用动态涂覆法将其涂覆在毛细管内壁,并研究了其在气相色谱分离烷烃、醇及取代芳香烃等方面的性能。结果表明,通过改变色谱分析条件,不同碳数的直链烷烃、直链醇、蒎烯类异构体、C8芳烃异构体取代芳香位置异构体均在Nafion膜固定相上得到了有效的分离,大部分异构体在该固定相上基本按照沸点从低到高的顺序依次洗脱。此外,还对基于Nafion膜的色谱柱分离蒎烯异构体和芳香位置异构体进行了热力学研究,并发现该柱分离异构体过程为放热过程,蒎烯分离受焓变和熵变共同控制,而芳香异构体分离过程主要受焓变的控制。     

Protein separation by capillary gel electrophoresis: A review

Capillary gel electrophoresis (CGE) has been used for protein separation for more than two decades. Due to the technology advancement, current CGE methods are becoming more and more robust and reliable for protein analysis, and some of the methods have been routinely used for the analysis of protein-based pharmaceuticals and quality controls. In light of this progress, we survey 147 papers related to CGE separations of proteins and present an overview of this technology. We first introduce briefly the early development of CGE. We then review the methodology, in which we specifically describe the matrices, coatings, and detection strategies used in CGE. CGE using microfabricated channels and incorporation of CGE with two-dimensional protein separations are also discussed in this section. We finally present a few representative applications of CGE for separating proteins in real-world samples.     

Hydrocarbons and fuels analyses with the supersonic gas chromatography mass spectrometry--the novel concept of isomer abundance analysis

Hydrocarbon analysis with standard GC-MS is confronted by the limited range of volatile compounds amenable for analysis and by the similarity of electron ionization mass spectra for many compounds which show weak or no molecular ions for heavy hydrocarbons. The use of GC-MS with supersonic molecular beams (Supersonic GC-MS) significantly extends the range of heavy hydrocarbons that can be analyzed, and provides trustworthy enhanced molecular ion to all hydrocarbons. In addition, unique isomer mass spectral features are obtained in the ionization of vibrationally cold hydrocarbons. The availability of molecular ions for all hydrocarbons results in the ability to obtain unique chromatographic isomer distribution patterns that can serve as a new method for fuel characterization and identification. Examples of the applicability and use of this novel isomer abundance analysis (IAA) method to diesel fuel, kerosene and oil analyses are shown. It is suggested that in similarity to the "three ions method" for identification purposes, three isomer abundance patterns can serve for fuel characterization. The applications of the Supersonic GC-MS for engine motor oil analysis and transformer oil analysis are also demonstrated and discussed, including the capability to achieve fast 1-2s sampling without separation for oil and fuel fingerprinting. The relatively fast analysis of biodiesel is described, demonstrating the provision of molecular ions to heavy triglycerides. Isomer abundance analysis with the Supersonic GC-MS could find broad range of applications including petrochemicals and fuel analysis, arson analysis, environmental oil/fuel spill analysis, fuel adulteration analysis and motor oil analysis.     

Simultaneous determination of six inorganic anions in drinking water by non-suppressed ion chromatography.

A non-suppressed ion chromatographic method with conductometric detection is described for the simultaneous determination of six inorganic anions: fluoride, chloride, nitrite, bromide, nitrate and sulphate. The separation was achieved on a low-capacity anion-exchange column Metrohm IC Anion Column Super Sep, with a mobile phase consisting of phtalic acid dissolved in high-purity water, 2-amino-2-hydroxymethyl-1,3-propendiol and acetonitrile. In this work computer optimization procedures, using computer programs to select chromatographic conditions have been used, leading to the achievement of a desired separation. By using the different optimization methods in an integrated manner it is, however, possible to both speed method development, by reducing unnecessary experimentation, and to overcome the many shortcomings of each method, because of the different approaches. The purpose of this work is to improve and characterise the method for simultaneous determination of six inorganic anions in drinking water by non-suppressed ion chromatography, using optimization procedures, in order to be applied to the routine analysis. The proposed method has numerous advantages over the other widely used non-suppressed ion chromatography methods: higher selectivity, shorter analysis time, lower quantitation and detection limits. The performance characteristics of the method were established by determining the following validation parameters: precision and accuracy, linearity, detection limits and quantitation limits.     

Use of borohydride reduction in the separation of estrogen carbonyls

The chromatographic behavior of the estrogen carbonyls, equilenin, equilin, and estrone, and their respective sodium borohydride reduction products has been studied. The separation of the 17 alpha-hydroxy reduced compounds is superior to the separations achieved for the parent carbonyls using both reversed-phase and normal-phase systems. The reductions appear quantitative by the chromatographic systems used but other work indicates that a small quantity of 17 alpha-hydroxy isomer is produced. The separations developed here have been used in the identification of 9-dehydroestrone, an impurity in estrone, and in the identification of the estrogens in a commercial aqueous suspension of estrogenic substances.     

Development,validation, and implementation of capillary gel electrophoresis as a replacement for SDS‐PAGE for purity analysis of IgG2 mAbs

Capillary gel electrophoresis (CGE) methods with UV detection were developed for reduced and non‐reduced mAb analysis. These methods can be used to evaluate mAb purity, offering more reproducible quantitation compared with that of traditional SDS‐PAGE methods. These CGE methods have been utilized as platform technology for bioprocess development, formulation development, mAb characterization, drug substance/drug product release testing as well as a required methodology for stability testing. We have found these CGE methods to be applicable across a platform of mAbs in preclinical and clinical development, with the majority of mAbs requiring no modification to the method conditions. This methodology has been ICH validated and transferred to several supporting organizations. The data presented herein describes the development of CGE methodology, platform application to mAb purity analysis, ICH validation, reliability metrics, and considerations on technology enhancement for improved performance and throughput.     

Time-resolved cryogenic modulation reveals isomer interconversion profiles in dynamic chromatography.

The dynamic chromatographic study of interconversion of E and Z forms of oximes has been investigated by using a novel cryogenic modulation method in a two-dimensional gas chromatographic array. The primary column is a conventional capillary GC column on which the molecular interconversion proceeds. In this case, the molecular dynamical process leads to a peak profile describing the kinetics and thermodynamics of the interconverting molecules during its chromatographic elution. Thus an interconversion region intercedes the elution of the individual stereoisomers of the reaction. Since the molecules are isomers, classical molecular identification methods such as gas chromatography-mass spectrometry are unable to study the individual instantaneous amounts of each of the compounds. Hence the infinitesimal profiles of interconversion along the entire column have never been experimentally observed; rather the total profile is normally subjected to mathematical modelling studies in order to match experiment with theory, and to gain the kinetic parameters of the process. In the present study, an instantaneous ratio of the individual isomers can be found during the chromatographic elution by direct measurement. This is achieved by using a cryogenic zone focussing process, with rapid longitudinal modulation of a cold trap and continual pulsing of collected zones into a fast-analysis high-resolution capillary column on which isomer interconversion is minimized. The data can be displayed as a two-dimensional contour plot to demonstrate the individual isomer profiles. The two-dimensional analysis also allows easy measurement of the peak ratios of the two isomers which is an indicator of the extent of interconversion that has taken place. Two model systems, acetaldoxime and butyraldoxime, were chosen to illustrate the use of the cryogenic modulation procedure. It is anticipated that the procedure could be applied to other molecules which exhibit gas-phase isomerizations or reactions.