基于聚乙二醇和不同多肽构建的生物涂层及其内皮细胞选择性研究

利用自由基聚合反应将甲基丙烯酸聚乙二醇酯(PEGMA)和甲基丙烯酸缩水甘油酯(GMA)的二元共聚物接枝在基材表面,并通过开环反应分别固定精氨酸-甘氨酸-天冬氨酸(RGD)、精氨酸-谷氨酸-天冬氨酸-缬氨酸(REDV)和酪氨酸-异亮氨酸-甘氨酸-丝氨酸-精氨酸(YIGSR)3种可特异性黏附内皮细胞的多肽.通过核磁共振检测合成的聚合物分子结构,并进一步通过X射线光电子能谱(XPS))以及原子力显微镜(AFM)的测试结果证明聚合物成功接枝在基材表面.利用紫外-可见吸收光谱(UV-Vis)对表面固定的3种多肽进行了定量表征.体外内皮细胞和平滑肌细胞黏附结果表明,3种不同多肽修饰的共聚物表面均能够有效阻抗平滑肌细胞的黏附,同时不同程度地促进内皮细胞的黏附,从而实现了基材表面内皮细胞的选择性黏附.其中与RGD和YIGSR多肽修饰的表面相比,REDV多肽修饰的表面呈现出更优异的内皮细胞选择性.这种具有内皮细胞特异选择性的界面在心血管支架涂层原位内皮化方面具有良好的应用前景.     

具有内皮细胞选择性的细胞膜仿生支架材料的研究

利用AIBN引发自由基反应,由单体2-(甲基丙烯酰氧基)乙基-2-(三甲基氨基)乙基磷酸酯(MPC)、甲基丙烯酸十八酯(SMA)、对硝基苯氧羰基聚乙二醇甲基丙烯酸酯(MEONP)合成了一种新型类细胞膜仿生涂层材料.MPC可以阻抗非特异性吸附;MEONP可以结合抗体或多肽促进特异性识别.通过表面固定的方法引入多肽序列Arg-Glu-Asp-Val(REDV),使涂层具有内皮细胞选择性.核磁、紫外吸收、红外光谱表征证实聚合物的组成以及REDV多肽在表面的固定;并通过血浆复钙化实验表征涂层的血液相容性.细胞黏附与增殖实验反映REDV多肽构建的涂层表面具备良好的特异性识别并结合内皮细胞的能力.     

聚(乳酸-羟基乙酸)共聚物涂层的释药性能

以乙酸乙酯为溶剂,配制聚(乳酸-羟基乙酸)共聚物(PLGA)雷帕霉素溶液,利用滴涂法在316L不锈钢表面制备PLGA载药涂层。于37℃磷酸盐缓冲液(PBS)中进行体外动态药物释放,并用紫外-可见分光光度计测定药物释放量。结果表明:PLGA涂层中PLGA分子量越小,羟基乙酸(GA)含量越高,药物释放越快;药物释放量与滴涂量呈线性关系,药物释放率与滴涂量的倒数呈线性关系;涂层中药物含量增加,其释放量也随之增加,而药物释放率先增加后降低。     

基于电聚多巴胺技术一锅法快速构建生物活性界面的研究

通过精确控制电化学参数采用循环伏安法在中性无氧水环境中制备得到膜厚可控的电聚多巴胺膜,并将这种电聚多巴胺技术与生物活性分子的负载相结合,通过一锅法电聚得到含REDV活性短肽的聚多巴胺活性膜,快速便捷地构建了具有促内皮细胞粘附的生物活性界面.椭圆偏振仪、扫描电子显微镜证实了材料界面上形成了均一的聚多巴胺膜;X射线光电子能谱以及荧光分析结果证实了REDV短肽已负载于电聚多巴胺涂层中.内皮细胞体外黏附实验证实REDV短肽保持了良好活性,可有效促进内皮细胞黏附、铺展及粘着斑的形成.这种一锅法快速制备具有生物活性的电聚多巴胺涂层技术有望为复杂的导电生物材料和装置的多功能界面修饰提供新的途径.     

聚乳酸-乙醇酸/纳米氧化锌复合电纺纤维装载亲疏水药物的控释及体外细胞毒性

利用静电纺丝技术制备了负载亲水性药物阿霉素(DOX)以及疏水性药物喜树碱(CPT)的复合纳米纤维. 先用巯基封端的普朗尼克(F127)修饰纳米氧化锌(FZnO), 再将FZnO负载盐酸阿霉素(DOX@FZnO), 最后将DOX@FZnO与CPT一起纺入聚乳酸-乙醇酸(PLGA)纤维中. 体外药物释放结果表明, 复合纳米纤维能够减小亲水性药物的突释, 减缓药物释放速率, 延长药物释放时间. 体外细胞活性结果表明, 双载药复合纤维比单载药复合纤维具有更强的细胞毒性, 能够有效抑制癌细胞生长.     

基于聚多巴胺辅助自组装单分子层技术的PTFE表面修饰及其内皮细胞选择性黏附研究

利用聚多巴胺技术对PTFE进行表面改性,X射线光电子能谱(XPS)、椭偏、接触角以及石英晶体微天平(QCM-D)证实DOPA分子可以在PTFE表面自聚形成反应性的超薄膜功能涂层,并通过聚多巴胺辅助自组装单分子层(SAM)技术构建了活性多肽链段CGREDVDY的界面.细胞黏附实验反映活性链段CGREDVDY的修饰表面具备良好的内皮细胞选择性黏附能力.这种具有内皮细胞选择性黏附能力的界面有望实现材料在复杂生理环境中对内皮细胞的原位诱导,为制备具有血管内皮原位快速愈合功能的新型血液相容性人造血管提供新途径.     

高分子前药研究进展

高分子前药可以控制药物释放速度,降低小分子药物的毒副作用,减少抗药性,增强抗肿瘤药物的靶向性和选择性,提高多肽、蛋白质和核酸类药物的稳定性和有效利用率,引起国内外广泛关注.本文综述了近年来高分子药物的研究进展,主要从高分子载体材料的选择与改性对载药量、生物相容性和肾排泄的影响,以及化学合成过程中载体和药物末端的修饰、空...     

基于磷酸化修饰的核/壳硅纳米颗粒药物缓释体研究

采用反相微乳液体系中功能化基团同步修饰方法制备了包载抗肿瘤药物平阳霉素(PYM)的磷酸化核/壳硅纳米颗粒(PYM-PO4SiNP), 考察了不同量的磷酸化修饰试剂对PYM-PO4SiNP的影响. 结果表明, 随着磷酸化修饰试剂量的增加, 制备的PYM-PO4SiNP的电位逐渐降低, 其包载的PYM 的释放速率逐渐加快, 但对颗粒的粒径没有明显影响. 本文选择能使药物平稳、缓慢释放的磷酸化修饰试剂用量, 制备了稳定性好、药物缓释时间长的PYM-PO4SiNP, 其载药量和包封率分别为7.2%和37.81%, 通过与CNE-2细胞共培育后, 可以使CNE-2细胞的存活率逐渐下降, 而磷酸化核/壳硅纳米颗粒PO4SiNP载体本身是没有毒性的. 这一研究工作的开展拓宽了核/壳硅纳米颗粒在药物载体领域中的应用.     

含乳糖酸修饰的多壁碳纳米管复合载药体系的合成及表征

以聚乙烯亚胺(PEI)修饰的多壁碳纳米管(PEI-CNT)为模板,利用异硫氰酸荧光素(FITC)和乳糖酸(LA)对其表面进行修饰,合成乳糖酸修饰的PEI-CNT复合载体,并负载抗肿瘤药物盐酸阿霉素(DOX),使其成为具有靶向功能的新型抗肿瘤药物载体。采用核磁共振(1 HNMR)、透射电镜、共聚焦显微镜及流式细胞仪等测试手段分析载体的结构和性质。载药复合体系在酸性条件下的体外药物释放速率明显高于中性条件下的,同时该复合载药体系对肝癌细胞(SMMC-7721)具有一定的靶向性。     

水滑石型磁性纳米载药粒子的制备及其体外药物释放性能研究

通过调变镁铁尖晶石的含量, 采用一步共沉淀法制备了一系列具有核壳结构的水滑石型磁性纳米载药粒子, 对其微结构、热稳定性、磁性和药物释放性能进行了系统的研究. 结果表明这种磁性纳米载药粒子是一种具有以镁铁尖晶石为核层、双氯酚酸(Diclofenac, DIC)插层水滑石(DIC-LDH)为壳层的复合纳米粒子, 粒径在90～180 nm之间. 其中壳层DIC-LDH的晶粒尺寸D₁₁₀和层板电荷密度随磁核含量的增大而逐渐减小. 磁性纳米载药粒子的载药量随磁核含量的增大而逐渐减小, 而其比饱和磁化强度则随着磁核含量的增大逐渐增大. 体外释放实验表明, 无外加磁场时, 磁核含量增大, 壳层DIC-LDH粒径减小, 磁性纳米载药粒子药物释放速率逐渐增大|外加1500 G磁场时, 磁核含量增大, 磁致团聚程度增大, 其药物释放速率逐渐减小.     

Different complex surfaces of polyethyleneglycol (PEG) and REDV ligand to enhance the endothelial cells selectivity over smooth muscle cells

Arg-Glu-Asp-Val (REDV) peptide with endothelial cells (ECs) selectivity was immobilized onto PEG based polymeric coating via the active p-nitrophenyloxycarbonyl group. The adhesion and proliferation of human umbilical vein endothelial cells (HUVECs) and human aortic smooth muscle cells (HASMCs) onto surface modified either by REDV end-tethered polyethylene glycol (PEG) or by the complex of free PEG and REDV were investigated to understand the synergic action of nonspecific resistance of PEG and specific recognitions of REDV. Cell culture results indicated that the surfaces end tethered by REDV peptide via PEG "spacer" (n=1, 6, 10) exhibited slight EC selectivity and showed small difference between different lengths of PEG chain. Both separate-culture and co-culture of HUVECs and HASMCs indicated that the introducing of free PEG into REDV tethered surface inhibited HASMCs adhesion significantly and remained a high level of HUVECs growth. Furthermore, the surface with short free PEG chain (n=6) was much more effective to enhance ECs selectivity than long EG chain (n=23). The combination of nonspecific resistance of short free PEG and the ECs selectivity of REDV peptide presents much better ability to enhance the competitive adhesion of HUVECs over HASMCs.     

Polymeric Lids for Microcontainers for Oral Protein Delivery

Oral delivery of proteins and peptides is one of the main challenges in pharmaceutical drug development. Microdevices have the possibility to protect the therapeutics until release is desired, avoiding losses by degradation. One type of microdevice is polymeric microcontainers. In this study, lysozyme is chosen as model protein and loaded into microcontainers with the permeation enhancer sodium decanoate (C10). The loaded microcontainers are sealed and functionalized by applying polymeric lids onto the cavity of the devices. The first lid is poly(lactic‐co‐glycolic) acid (PLGA) and on top of this either polyethylene glycol (PEG) or chitosan is applied (PLGA+PEG or PLGA+chitosan, respectively). The functionalization is evaluated in vitro for morphology, drug release, and mucoadhesive properties. These are coupled with in vitro and ex vivo studies using Caco‐2 cells, Caco‐2/HT29‐MTX‐E12 co‐cultures, and porcine intestinal tissue. PLGA+chitosan shows slower release compared to PLGA+PEG or only PLGA in buffer and the transport of lysozyme across cell cultures is not enhanced compared to the bulk powder. Microcontainers coated with chitosan or PEG demonstrate a three times stronger adhesion during ex vivo mucoadhesion studies compared to samples without coatings. Altogether, functionalized microcontainers with mucoadhesive properties and tunable release for oral protein delivery are developed and characterized.     

新型微球载体材料——PACA-co-PEG的性能

聚氰基丙烯酸烷基酯;药物载体;生物降解性     

Photolithographically Patterned Cell-Repellent PEG-b-PTHPMA Diblock Copolymer for Guided Cell Adhesion and Growth

Surfaces for guided cell adhesion and growth are indispensable in several diagnostic and therapeutic applications. Towards this direction, four diblock copolymers comprising polyethylene glycol (PEG) and poly(2-tetrahydropyranyl methacrylate) (PTHPMA) are synthesized employing PEG macroinitiators of different chain lengths. The copolymer with a 5000 Da PEG block and a PEG-PTHPMA comonomers weight ratio of 43–57 provides a film with the highest stability in the culture medium and the strongest cell repellent properties. This copolymer is used to develop a positive photolithographic material and create stripe patterns onto silicon substrates. The highest selectivity regarding smooth muscle cell adhesion and growth and the highest fidelity of adhered cells for up to 3 days in culture is achieved for stripe patterns with widths between 25 and 27.5 µm. Smooth muscle cells cultured on such patterned substrates exhibit a decrease in their proliferation rate and nucleus area and an increase in their major axis length, compared to the cells cultured onto non-patterned substrates. These alterations are indicative of the adoption of a contractile rather than a synthetic phenotype of the smooth muscle cells grown onto the patterned substrates and demonstrate the potential of the novel photolithographic material and patterning method for guided cell adhesion and growth.     

Efficient One-Step Passivation of Polyurethane Using Transurethanization

The uncontrolled accumulation of biological materials on the surface of medical devices through protein adsorption or cell adhesion causes adverse biological reactions in the living host system, leading to complications. In this study, poly(ethylene glycol) (PEG) is successfully grafted onto polyurethane (PU) surfaces by using a new strategy through a simple and efficient transurethanization reaction. The PEG hydroxyl group is deprotonated and then reacted with the PU surface to provide antiadhesive hydrophilic surfaces in a single step. Surface analysis techniques proved the grafting to be efficient and the formation of a hydrophilic polymeric layer at the surface of PU. Biological assays showed that the surface modification induced lower protein adsorption, cell, platelet, and bacterial adhesion than untreated surfaces, showing a potential for biomedical applications.     

聚乙二醇功能化程度对纳米金壳夹心二氧化硅载药量及稳定性影响研究

本文系统研究了不同聚乙二醇(PEG)功能化程度对纳米金壳夹心二氧化硅(GSNs)载药量及稳定性的影响.透射电子显微镜(TEM)观察结果表明,GSNs表面经修饰分子量为5 KDa的α-甲氧基-ω-巯基聚乙二醇(mPEG-SH)分子后,PEG分子层平均厚度约为4 nm;随PEG化程度增加,GSNs聚集沉降速度改善,稳定性提高,久置后(35 d)稳定性良好;电感耦合等离子体发射光谱(ICP-OES)测试表明,当PEG与Au反应摩尔比为0.24时,PEG分子层在金壳表面接近饱和;不同PEG化程度对GSNs载药量基本无影响.本研究可为优化无机纳米材料表面PEG修饰过程,发展无机纳米载体材料体内应用提供理论依据.     

Surface fixation of poly(ethylene glycol)via photodimerization of cinnamate group

This article reports a new fixation method for hydrophilic layers on substrates. The method is based on the photochemistry of the cinnamate group, which is capable of intermolecular dimerization upon ultraviolet (UV) light irradiation. The method used was as follows. First, two photoreactive polymers were sequentially coated on a polymeric surface: a polycinnamate as an adhesive layer and a cinnamated poly(ethylene glycol) (PEG) as a hydrophilic layer. Subsequently the surface was exposed to UV light. No delamination occurred upon washing with water and methanol; the photoreactive PEG was chemically bonded onto the surface via the polycinnamate. The higher the molecular weight of PEG, the higher the wettability of the surface was formed. Minimal cell adhesion was observed on such a surface. The biomedical applications of the method are discussed. © 1993 John Wiley & Sons, Inc.     

Mechanical and Adhesive Properties of Ploy(ethylene glycerol) Diacrylate Based Hydrogels Plasticized with PEG and Glycerol

Using polyethylene glycol(PEG) or glycerol as the plasticizer, we synthesized the hydrogels from poly(ethylene glycol) diacrylate(PEGDA), polyvinylpyrrolidone(PVP) and poly(vinyl alcohol)(PVA) under UV radiation. The effects of different plasticizers on the mechanical properties and adhesion properties of the hydrogels were investigated. The results show that the plasticizer can improve the elongation and peeling force. The most pronounced changes in the tensile property of the hydrogels are due to the addition of glycerol followed by PEG, the lower the plasticizer's molecular weight, the greater its effect. The maximum peeling force is 0.317 or 0.257 N with PEG or glycerol as plasticizer, respectively, and their adhesion properties are due to the formation of hydrogen bonds.     

SEM analysis and gas permeability test to characterize polysulfone membrane prepared with polyethylene glycol as additive

Phase inversion method is applied to prepare flat sheet asymmetric polymeric membranes from homogeneous solution of 12 wt% polysulfone (PSf) with two different solvents--N-methyl-2-pyrrolidone (NMP) and dimethyl acetamide (DMAc). 5.0 wt% polyethylene glycol (PEG) of three different molecular weight (400, 6000, and 20,000 Da) is used as the polymeric additives in the casting solution. Membranes are characterized by two different techniques viz. scanning electron microscopy (SEM) and gas permeation tests. Finally, the results of both the techniques are compared with those calculated from pure water permeation tests using Hagen-Poiseuille equation. It is found that though the values obtained from all the techniques vary from each other, their trend with increase in molecular weight of PEG seems to be the same. It is seen that when molecular weight of PEG increases from 400 to 20,000 Da, the mean pore size of the prepared membranes decreases, while the porosity and pore density show an increasing trend; the pressure normalized gas flux rises significantly and the thickness of the top layer of the prepared membrane sheet increases.