Simultaneous determination of copper and lead by graphite-furnace atomic absorption spectrometry after liquid-liquid extraction of the ion pair with zephiramine

A procedure for the simultaneous determination of copper and lead by graphite-furnace atomic absorption spectrometry was investigated by means of a two-channel atomic absorption spectrometer. Both copper(II) and lead(II) are converted into their iodo complex anions and extracted quantitatively into diisobutyl ketone as their ion pairs with tetradecyldimethylbenzylammonium (zephiramine) in a 10-ml centrifuge tube. An aliquot of the organic extract is directly pipetted from the upper layer in the centrifuge tube and injected into the graphite furnace. The detection limits (S/N = 3) are 2.6 ng ml^?1 of copper and 1.0 ng ml^?1 of lead. The relative standard deviations for 10 replicate determinations are 2.9% for 20 ng ml^?1 of copper and 2.7% for 10 ng ml^?1 of lead. Results of analyses of some practical samples are given.     

Simultaneous determination of histamine and spermidine by second-derivative synchronous fluorescence spectrometry

The method is based on formation of the fluorescent condensation products with o-phthaldialdehyde; 0.5–2000 ng ml^?1 histamine and 3–700 ng ml^?1 spermidine can be quantified, with relative standard deviations of 2–3%. Histamine/spermidine ratios of 2.5:1–1:30 can be handled. A selectivity study is reported.     

Indirect determination of fluoride in waters with lanthanum alizarin complexone and inductively-coupled plasma emission spectrometry

Fluoride is determined indirectly by measurement of the La II 333.75-nm line in the lanthanum/alizarin complexone/fluoride complex. The ternary complex is extracted into hexanol containing N,N-diethylaniline and the extract is introduced directly into the plasma. Related to water samples, the detection limit (3σ, concentration factor 5) is 0.59 ng ml^?1 fluoride, calibration is linear up to 1.2 μg ml^?1 and the relative standard deviation for 0.04 μg ml^?1 is 2.6%. Alkali, alkali elements and most anions do not interfere. The method is applied in the analysis of river water, coastal seawater and drinking water.     

Polarography of disodium pentacyanonitrosylferrate(II): Part 2. Determination at Therapeutic Levels in Serum,Plasma, and Whole Blood

Disodium pentacyanonitrosylferrat(II) (sodium nitroprusside) is determined at therapeutic (ng ml^?1) levels in plasma, serum and blood with conventional and high-performance differential pulse polarography (d.p.p. and h.p.d.p.p.) at a dropping mercury electrode or a static mercury drop electrode. Serum or plasma (3 ml) is treated with perchloric acid containing 1 mg ml^?1 potassium hexacyanoferrate(II), centrifuged for 10 min and subjected to polarography. For spiked serum, calibration graphs are linear over the range 30–1000 ng ml^?1 sodium nitroprusside, regardless of the polarographic technique; the estimated detection limit is 15 ng ml^?1 (5 × 10^?8 M). Calculated therapeutic levels range from 100 to 1000 ng ml^?1. Similar results were obtained for spiked plasma. A similar procedure is suitable for whole blood and was used to study the in-vitro degradation of sodium nitroprusside (200 ng ml^?1) on incubation at 37°C. The in-vitro loss is rapid (t_{$\text{1}\text{2}$} ≈ 6 min) but meaningful in-vivo levels can be obtained when the blood is collected in a 0.9% sodium chloride solution at 0°C. Thiocyanate, the main metabolite of nitroprusside, and thiosulphate, which is a potential antidote for cyanide, do not interfere.     

Determination of the major Δ9-tetrahydrocannabinol metabolite in urine by high-performance liquid chromatography and photodiode array detection

A procedure for quantifying urinary 11-nor-Δ⁹-tetrahydrocannabinol-9-carboxylic acid (THC-COOH), the primary metabolite of Δ⁹-tetrahydrocannabinol, is presented. Urine samples with cannabinol as internal standard undergo alkaline hydrolysis, followed by a clean-up on short bonded-phase extraction columns. The extracts are separated by high-performance liquid chromatography on a C₈ reversed-phase column with acetonitrile/aqueous phosphoric acid as mobile phase. Detection is done with an on-line high-speed spectrophotometer (photodiode array detector). The improvement of peak identification and the validation of peak identity is demonstrated by u.v. spectra scanned from 200 to 350 nm, three-dimensional spectrochromatograms and contour plots. A linear relationship is observed between the peak height ratio of THC-COOH vs. internal standard and the concentration of THC-COOH (r = 0.9995). The sensitivity is as good as that of a single-channel u.v. detector. The detection limit is 10 ng ml^?1 THC-COOH. The method was used to confirm THC-COOH in 100 urine specimens, which were cannabinoid-positive in an immunoassay drug screening. All specimens were confirmed as positive, with 30–28- ng ml^?1 THC-COOH.     

Determination of vanadium and titanium in steel by inductively coupled plasma atomic emission spectrometry with modified use of a tungsten boat furnace atomizer for atomic absorption spectrometry

For electrothermal sample introduction, a commercially available tungsten boat atomizer for atomic absorption spectrometry (AAS) was transferred to a vaporizer for inductively coupled plasma atomic emission spectrometry (ICP-AES). The modification retained as much of the original design of the atomizer as possible, so that the apparatus could be switched easily between conventional tungsten boat furnace (TBF)-AAS and TBF-ICP-AES. By using this system, a procedure for the determination of vanadium and titanium in steel was investigated. The detection limits (S/N=3) of vanadium and titanium were 3.9 and 1.5 ng ml^?1, respectively. The relative standard deviations for five replicate determinations were ca. 3% for both elements. The calibration graphs were linear up to 100 μg ml^?1 vanadium(V) and 10 μg ml^?1 titanium(IV). Results of analyses of some low-alloy steel samples are given.     

Determination Of SE(IV) in the Presence of SE(VI) at NG ML− Concentration Levels by a Kinetic Spectrophotometric Method

ABSTRACT

The catalytic effect of Se(IV) on the reduction reaction of thionine(TN) by sulfide ion is used for determination of trace amounts of selenium(IV) ion by a kinetic-spectrophotometric method. This new method is simple and highly sensitive. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the reaction mixture at 598 nm. The fixed time method was used for the first 45s from initiation of the reaction. Under the optimum conditions, in the concentration range of 2-90 ng ml^? of selenium(IV), a quite linear regression equation (r = 0.9984, n = 14) was obtained. The experimental detection limit of the method (S/N = 3) was 1.3 ng ml^?. The relative standard deviation of ten replicate measurements is 2.51% for a 40 ng ml^? solution of selenium. The proposed method is used to the study of selenium (IV,VI) speciation in water at ng ml^? levels. This method was extended for the determination of selenium in real samples.     

Square-wave cathodic adsorptive stripping voltammetric determination of trace amounts of 2-mercaptobenzimidazole in water samples

A sensitive, simple and reproducible square-wave cathodic adsorptive stripping voltammetric method is developed for the determination of 2-mercaptobenzimidazole (MBIM) in different water samples using a static mercury drop electrode (SMDE) as a working electrode. The solution conditions and instrumental parameters were optimized for the determination of MBIM by square-wave cathodic adsorptive stripping voltammetry. This method is based on a sensitive adsorptive reduction peak of the MBIM at ?0.532 V vs. Ag/AgCl reference electrode in a Britton-Robinson buffer at pH 10.0. The linear concentration range was 20–600 ng ml^?1 when using 0.0 V as the accumulation potential. The detection limit of the method was calculated to be 8.41 ng ml^?1. The precision was excellent with relative standard deviations (n = 20) of 2.30%, 1.71%, 2.25% and 1.33% at MBIM concentrations of 40, 90, 200 and 500 ng ml^?1, respectively. The proposed voltammetric method is used for the determination of MBIM in different spiked water samples.     

Fluorimetric determination of chromium at low levels with 3-hydroxyflavone and application of the method to steels

The method is based on a 1:1 Cr(VI)/3-hydroxyflavone complex which is extracted into benzene at H_o = ?0.6. The complex has a pK^* value of 7.8 ± 0.1. Chromium is determined in the range 10–650 ng ml^?1 with excitation at 358 nm and emission measurement at 530 nm. The relative standard deviation is 6.1% for 332 ng ml^?1 chromium (n = 10). The method is applied to the determination of chromium in steels.     

Flame atomic absorption spectrometric determination of Cd(II), Ni(II), Co(II) and Cu(II) in tea and water samples after simultaneous preconentration of dithizone loaded on naphthalene

A simultaneous preconcentration procedure for the determination of Cd(II), Ni(II), Co(II) and Cu(II) by atomic absorption spectrometry is described. The method is based on solid phase extraction of the metal ions on dithizone loaded on naphthalene in a mini-column, elution with nitric acid and determination by flame atomic absorption spectrometry. The sorption conditions including NaOH concentration, sample volume and the amount of dithizone were optimized in order to attain the highest sensitivity. The calibration graph was linear in the range of 0.5–75.0 ng ml^?1 for Cd(II), 1.0–150.0 ng ml^?1 for Ni(II), 1.0–150.0 ng ml^?1 for Co(II) and 1.0–125.0 ng ml^?1 for Cu(II) in the initial solution. The limit of detection based on 3S_b was 0.13, 0.32, 0.33 and 0.43 ng ml^?1 for Cd(II), Ni(II), Co(II) and Cu(II), respectively. The relative standard deviations (R.S.D) for ten replicate measurements of 20 ng ml^?1of Cd(II), 100 ng ml^?1 of Ni(II), Co(II) and 75 ng ml^?1 of Cu(II) were 3.46, 2.43, 2.45 and 3.26%, respectively. The method was applied to the determination of Cd(II), Ni(II), Co(II) and Cu(II) in black tea, tap and river water samples.     

Cloud point extraction and spectrophotometric determination of codeine in pharmaceutical and biological samples

Cloud point extraction process using non-ionic surfactant, Triton X-114, to extract codeine from aqueous solution was investigated. The method was based on the extraction of codeine and bromothymol blue from acetate buffer media to surfactantrich phase and formed a charge transfer-ion pair complex. The extracted surfactant-rich phase was diluted with ethanol and its absorbance was measured at 430 nm. The effect of different variables such as pH, Triton X-114 concentration, cloud point temperature and time was established. The calibration graph was linear in a wide range of 100–700 ng ml^?1 of codeine with r = 0.998 (n = 7). The detection limit based on three times standard deviation of the blank (3s) was 4.6 ng ml^?1 and relative standard deviation (R.S.D) is 2.15% for 500 ng ml^?1 codeine (n = 5). The proposed method was applied to the determination of codeine in acetaminophen codeine tablets and blood samples.     

Direct determination of biacetyl in fats by sensitized room temperature phosphorescence

A direct method for the determination of biacetyl in butter and margarine by sensitized room temperature phosphorescence (SRTP) is described. After dissolution of the sample in hexane, biacetyl is isolated by distillation, and its native phosphorescence is sensitized by a non-polar linear furocoumarin, 4′5′-dihydro-3-carbethoxypsoralen. The limit of detection is 0.05 ng ml^?1 biacetyl, with a linear response from 1 × 10^?4 to 1 μg ml^?1 (r = 0.999). The RSD is 3.5% at 100 ng ml^?1.     

Solid phase extraction of zirconium as arsenazo(III) complex on agar and spectrophotometric determination

A new solid phase extraction method for the separation and determination of zirconium using agar as an adsorbent is described. The method is based on the adsorption of zirconium as arsenazo(III) complex on agar in a mini-column, elution with sulfuric acid-acetone mixture and determination by spectrophotometry. The effect of different parameters such as pH, concentration of the reagent, eluting reagent, and volume of the sample, amount of the adsorbent and interfering ions was investigated. The calibration graph was linear in the range of 5?C300 ng ml^?1 of zirconium under optimum conditions. The limit of detection based on 3S_b was 1.3 ng ml^?1 and the relative standard deviation (R.S.D) for ten replicate measurements of 15 and 200 ng ml^?1 of zirconium was 3.7 and 1.8%, respectively. The method was applied to the determination of zirconium in water and soil samples.     

Spectrophotometric Catalytic Determination of Trace Amounts of Selenium Based on the Reduction of Azurea by Sulphide

ABSTRACT

A sensitive catalytic kinetic spectrophotometric method for determining ng ml^?1 concentrations of selenium is described. The method, based on the catalytic effect of Se (IV) on the reduction of azureA by sulphide, is monitored spectrophotometrically at 600 nm. The linearity range of the calibration graph is dependent on the concentration of sulphide. The variables affecting the rate of the reaction were investigated and the optimum conditions were established. The method is simple, rapid, precise, sensitive, free from many interferences and is widely applicable. The limit of detection is 2.5ng ml^?1 of Se. The relative standard deviation of seven determinations of 100 ng ml^?1 Se was 1.5%. The method was applied to the determination of selenium in spiked water, Kjeldahl tablets, synthetic samples and health care products.     

Determination of lead by hydride generation atomic absorption spectrometry in the presence of nitroso-R salt

A method is described for the determination of lead by hydride generation atomic absorption spectrometry in the presence of nitroso-R salt (1-nitroso-2-naphthol-3,6-disulphonic acid, disodium salt). The method is superior in sensitivity to those using peroxodisulphate, dichromate or hydrogen peroxide as oxidants. A characteristic concentration (0.0044 absorbance) of 0.8 ng ml^?1 and a relative standard deviation of 3.8% for 20 ng ml^?1 Pb were obtained. The proposed method has been applied successfully to the determination of lead in certified reference materials.     

2,3-Diphenylquinolizinium bromide as a fluorescent derivatization reagent for amines

2,3-Diphenylquinolizinium bromide (2,3-DPQ) is proposed as a fluorogenic reagent for amino compounds. A spectrofluorimetric method based on its use is described which allows the determination of μg ml^?1 to ng ml^?1 levels of primary and secondary amines, including aromatic and cyclic compounds. The precision of the method was 4–8% (relative standard deviation) (n=10). The influence of several external factors on the derivatization reaction was studied using piperidine as a model compound. The analytical reaction can be effected at room temperature, which avoids the degradation of labile sample amines, e.g., catecholamines, and simplifies the experimental procedure. The presence of an excess of a basic catalyst (triethylamine) was critical for the reaction to develop satisfactorily. Fluorescence due to the reaction product was detected 5 min after the start of the analytical reaction.     

Determination of uranium in marine sediment pore waters by isotope dilution inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) was used in an isotope dilution mode to assay small-volume (0.25 ml) sediment pore waters for their uranium contents, using ²³⁶U as the spike. The only pretreatment required was a simple dilution by a factor of 20, which gave sufficient volume for three replicate analyses per sample. Rapid and accurate results were obtained for a variety of samples and standards, ranging in concentration from 0.05 to 10 ng U ml^?1. A suite of 30 samples can be analysed in less than 6 h by this method. The relative standard deviation was better than 1.9%, with a detection limit, based on 3σ background, of 2 pg U ml^?1 in solution (40 pg ml^?1 in samples). Sea water is a difficult matrix for ICP-MS and thus the method is generally suitable for uranium determinations in many other sample solutions.     

Sensitivity enhancement for inductively-coupled plasma atomic emission spectrometry of cadmium by suction-flow on-line ion-exchange preconcentration

A column of iminodiacetate chelating resin is used to preconcentrate cadmium by a factor of 25-fold for a 5-ml sample. The sampling rate was 25 h^?1, and the detection limit 0.05 ng Cd²⁺ ml^?1. The r.s.d. for 0.1 μg Cd²⁺ ml^?1 was 2.2% (n = 10). This technique was applied to the determination of cadmium in certified biological reference materials and waste-water samples.     

Gas-liquid chromatographic determination of moprolol (SD 1601) in human plasma and urine

1-(o-methoxyphenoxy)-3-isopropylamino-2-propanol hydrochloride (moprolol, Omeral^R), is a new β-adrenergic blocking agent. A gas chromatographic method for determining unchanged moprolol in human biological fluids has been developed. After solvent extraction, a bis-trifluoroacetyl derivative was formed and measured by an electron capture detector. The quantification was checked by using an internal standard (pronethalol), which was added to all samples. The electron capture response was linear between 10 and 500 ng/ml. To avoid contamination of the peaks, careful extraction was imperative. The main advantages offered by the described method are: specificity, high sensitivity (10 ng.ml^?1) and the small amount of biological fluids (1 ml plasma a. e.) required.     

Voltammetric behaviour of ascorbic acid at a graphite—epoxy composite electrode chemically modified with cobalt phthalocyanine and its amperometric determination in multivitamin preparations

Cyclic voltammetry was used to investigate the electrochemical behaviour of ascorbic acid at a carbon—epoxy composite electrode modified with the electron mediator cobalt phthalocyanine. The modified electrode reduced the overpotential necessary for the oxidation of the vitamin by approximately 150 mV to 0.21 V vs. The saturated calomel electrode; the process was dependent on the pH of the supporting electrolyte, but independent of ionic strength over the range studied. The relative standard deviation (r.s.d.) of the peak heights of the cyclic voltammograms was 0.81% for a 1 × 10^?4 M ascorbic acid solution (n = 7). The optimum supporting electrolyte was found to be 0.05 M phosphate buffer (pH 5).Amperometry in stirred solutions was then done at an applied potential of +0.25 V. The limit of detection was 0.65 ng ml^?1 and the calibration graph was linear in the range 175 ng ml^?1?50 μg ml^?1. The method was used to determine ascorbic acid concentrations in single- and multivitamin preparations; the recovery was 97.86% for the vitamin added to one preparation. The r.s.d. for the analyses in these samples was about 5%. For comparison, the vitamin was also determined in these tablets using LC with UV detection at 254 nm; the correlation coefficient for the levels determined was 0.9989 (p = 0.0007).