Fast beating null strip during the reflection of pulsed Gaussian beams incident at the Rayleigh angle

It is well known that harmonic bounded Gaussian beams undergo a transformation into two bounded beams upon reflection on a solid immersed in a liquid. The effect is known as the Schoch effect and can be found at the Rayleigh angle for thick plates and at the different Lamb angles for thin plates. Here, a study is made on the effect of pulsed Gaussian beams reflected on solids. It is found experimentally that the Rayleigh wave phenomenon still generates two reflected bounded beams, whereas Lamb wave phenomena do not generate this effect. This fact may be explained intuitively by realizing that the Rayleigh phenomenon is a coincidental phenomenon that is generated in situ, whereas the Lamb wave phenomenon is a non-coincidental phenomenon that is generated only after incident sound is influenced by both sides of a thin plate. Another explanation is the fact that Rayleigh waves are not dispersive, whereas stimulation and propagation of Lamb waves is frequency dependent. A pulse contains many frequencies and therefore only a fraction of the incident pulse is transformed into a Lamb wave. In this paper, numerical simulations are performed that show that actually the Schoch effect does occur neither for Rayleigh waves, nor for Lamb waves. As a matter of fact, a pulse, incident at the Rayleigh angle, generates two reflected lobes with a null zone of a different kind. The null zone is beating several times during the passage of each pulse. This results in a 'null zone' having a lower mean intensity than any of the two lobes, still less outspoken than for the case of harmonic incident bounded beams. This effect does only occur for Rayleigh wave generation and is much less outspoken for Lamb wave generation.     

有限入射声束在液固界面声反射的数值研究

采用将有限声束分解为一系列平面波的方法，对液固界面声束的声反射问题进行了数值研究，结果表明，当声束入射角为瑞利疲激角时，反射声速有明显位移；当声束在液固界面“掠射”时，反射声速显著变宽，文中还讨论了束宽对反射声速横截面上声场分布的影响。     

Bounded beam interaction with thin inclusions. Characterization by phase differences at Rayleigh angle incidence

A theoretical study of the reflection of a bounded Gaussian ultrasonic beam, incident onto a rectangular inclusion located near a fluid/solid half-space interface, is presented. The thickness of the inclusion is assumed to be much smaller than the ultrasonic wavelength in the solid. It is shown that, at critical Rayleigh angle incidence, the phase in the point of maximum amplitude of the shifted reflected lobe is very sensitive to dimension variations of the inclusion, and thus useful for inclusion characterization. The modelization of the problem is based on mode theory.     

固-固界面退化特性的超声反射评价方法

提出了一种基于有限宽超声束反射的固-固界面退化特性评价方法,从理论和数值仿真角度进行了分析和计算。将两固体界面间的薄层简化为界面弹簧模型,以界面法向和切向劲度系数表征界面的退化程度。通过数值计算求得有限宽超声纵波束在不同入射角和界面不同退化程度下的反射横波、反射纵波的镜面反射系数。进一步地,通过建立二维有限元模型,仿真研究了有限宽超声纵波束在给定入射角及界面不同退化程度下镜面反射系数的变化规律。结果表明,反射纵波和反射横波的镜面反射系数随有限宽超声纵波束的入射角及界面劲度系数的改变而变化,且存在镜面反射系数随界面劲度系数单调且敏感变化的入射角,据此可准确评价界面的退化程度。     

The Reflection of Magneto-Thermoelastic $P$ and $SV$ Waves at a Solid Half Space Using Dual-Phase-Lag Model

The dual-phase-lag heat transfer model is employed to study the reflection phenomena of $P$ and $SV$ waves from a surface of a semi-infinite magneto-thermoelastic solid. The ratios of reflection coefficients to that of incident coefficients are obtained for $P$- and $SV$-wave cases. The results for partition of the energy for various values of the angle of incidence are computed numerically under the stress-free and rigidly fixed thermally insulated boundaries. The reflection coefficients are depending on the angle of incidence, magnetic field, phase lags and other material constants. Results show that the sum of energy ratios is unity at the interface. The results are discussed and depicted graphically.     

Experimental study of ultrasonic beam sectors for energy conversion into Lamb waves and Rayleigh waves

When a bounded beam is incident on an immersed plate Lamb waves or Rayleigh waves can be generated. Because the amplitude of a bounded beam is not constant along its wave front, a specific beam profile is formed that influences the local efficiency of energy conversion of incident sound into Lamb waves or Rayleigh waves. Understanding this phenomenon is important for ultrasonic immersion experiments of objects because the quality of such experiments highly depends on the amount of energy transmitted into the object. This paper shows by means of experiments based on monochromatic Schlieren photography that the area within the bounded beam responsible for Lamb wave generation differs from that responsible for Rayleigh wave generation. Furthermore it provides experimental verification of an earlier numerical study concerning Rayleigh wave generation.     

Backscattering enhancements from Rayleigh waves on the flat face of a tilted solid cylinder in water

When the face of a finite solid elastic cylinder is ensonified by an acoustic wave, a variety of backscattering contributions associated with acoustic wave coupling into elastic waves are observed. A significant backscattering enhancement is observed for tilts such that the acoustic wave is incident on the face of the cylinder in the vicinity of the coupling angle for launching Rayleigh waves across the face. The observed backscattering indicates that the Rayleigh waves are reflected at the edge of the face and subsequently radiate acoustic waves in the backscattering direction. The measured backscattering is compared to an approximate theoretical prediction. Approximating the focusing of the Rayleigh wave after reflection at the (circular) edge by a Gaussian beam pressure distribution on the cylinder's face yields simple expressions for the amplitude which are consistent with the measurements. In the vicinity of end-on incidence, other backscattering contributions due to the reflection of waves traveling down the length of the cylinder are observed. There is also evidence of a face-traversing longitudinal wave for slightly tilted cylinders.     

The reflection of bounded inhomogeneous waves on a liquid/solid interface

Fourier analysis and normal mode theory are used to describe the reflection of bounded inhomogeneous waves on a liquid/solid interface. Nonspecular reflection phenomena in the Rayleigh angle are studied in detail. In this way, an explanation is given for the Rayleigh dip phenomenon for positive inhomogeneity factors and the related result of a reflection coefficient larger than unity when the sign of the inhomogeneity factor is reversed. In the limit of large beamwidths, the reflection coefficient predicted by the infinite plane inhomogeneous wave theory is obtained. These results are entirely consistent with the experimental work published by Deschamps [J. Acoust. Soc. Am. 96, 2841-2848 (1994)]. The energy efficiency of Rayleigh wave excitation is investigated as well. It is shown that for large beamwidths, the energy efficiency for bounded inhomogeneous waves is considerably higher in comparison with Gaussian and square-profiled beams.     

Rayleigh wave scattering from a vertical edge of isotropic substrates

The paper numerically studies the harmonic Rayleigh wave scattering at the 90-degree corner of isotropic substrate. The finite element method is used. The main attention is paid to two cases. The first one is the apex of the substrate corner is rounded off. The second one consists in that a layer of foreign material is deposited on the face which scatters the Rayleigh wave. The dependence of the reflection and the transmission coefficients on the Poisson ratio, the angle of incidence, the fillet radius, and the layer thickness are obtained. It is found that if the Rayleigh wave is incident perpendicularly to the substrate border, then the fillet of small radius as compared to the wavelength increases the reflection coefficient and decreases the transmission coefficient by factors 1.3–1.8. At normal incidence, the Poisson ratio does not change qualitatively the dependence of the reflection and transmission coefficients on the fillet radius. But the Poisson ratio can substantially affect the angle dependence of these coefficients if the wave is incident obliquely on the corner rounded off. It is also found out that a layer can modify the conditions of scattering such that the incident wave is totally reflected without transmission and conversion into bulk waves in a wide interval of angle of incidence, although, in principle, the bulk wave generation is allowed within a part of this angle interval.     

Observation of the lateral displacement of surface acoustic beams reflected at boundaries of layered substrates

The reflection of an acoustic surface wave incident on a velocity discontinuity is studied near the critical angle by using an optical-diffraction probe. The abrupt velocity change is implemented on fused quartz and on single crystal quartz substrates by plating the surface with a prism-shaped gold layer. A lateral displacement of the reflected beam, relative to the mirror-reflection path, is observed. For angles of incidence corresponding to total reflection, the phenomenon exhibits a behaviour which is similar to the Goos-Hänchen effect encountered at the total reflection of bounded electromagnetic waves. However, contrary to the electromagnetic case, it is found here that a significant lateral shift occurs also for angles well into the partial-reflection region and that the reflected beam profile is considerably distorted at the critical angle. These observations may be evidence of a leaky-wave mode along the boundary of the plated area, with the phase-matching condition satisfied at or near the critical angle.     

高光谱分辨率激光雷达鉴频器的设计与分析

提出了利用Fabry-Perot干涉仪的反射场实现高光谱分辨率激光雷达精细探测大气光学参量的新方法和思路.设计了高光谱分辨率的分光系统,并分析了干涉仪反射场的光谱透过特征曲线.结合高光谱激光雷达探测信号特征,讨论分析了谱分离比和瑞利信号透过率随反射率和腔长的变化曲线,同时结合误差传递公式,建立了仿真分析模型,讨论了回波光束发散角和入射角变化对激光雷达探测结果的影响.结果表明,所提出的Fabry-Perot干涉仪反射场可以实现高光谱分辨率激光雷达探测系统的精细分光,同时探测结果误差随回波光束发散角变化不敏感,控制发散角在10 mrad以内,入射角在1.5 mrad以内时,可以实现气溶胶光学参数廓线的高精度探测.     

Detection of local inhomogeneities in solids by Rayleigh angle reflection

A schlieren method is employed to observe changes in the reflection profile of an ultrasonic beam incident at the Rayleigh angle. These changes are used to determine the location of small elastic inhomogeneities of a flat solid sample.     

Unified theory of total reflection phenomena at a dielectric interface

By utilizing a rigorous plane-wave representation, we investigate the basic wave mechanism that is responsible for both the lateral (Goos-H?nchen) shift of a gaussian light beam incident from a denser medium upon the interface to a rarer medium, and the weak radiance that accompanies the reflected beam. We thus find that the complete reflected field contains a geometric-optics component, whose domain is given by the mirror reflection of the incident beam, as well as a lateral-wave component which occupies a much larger domain. Our results show that the near field of the lateral-wave component interferes with the geometric-optics component and thereby produces the Goos-H?nchen shift of the reflected beam. The intermediate and far fields of the lateral-wave, on the other hand, are responsible for the weak radiance that trails the reflected beam. By demonstrating that both the beam shift and the trailing radiance represent two facets of the same wave process, the lateral-wave field is shown to provide a unified interpretation of two effects that have previously been regarded as separate phenomena. The dependence of these effects on beam width, angle of incidence, and polarization are also considered. Portions of this paper were presented orally at the Fall 1971 Meeting of the Optical Society of America, Ottawa, Canada; October 1971.     

Positively and negatively large Goos–Hänchen lateral displacements from a symmetric gyrotropic slab

A detailed study on the lateral displacements of a transverse magnetic (TM) wave transmitted and reflected from a symmetric gyrotropic slab is presented. We give the analytic formulas for the transmission coefficient and the reflection coefficient, as well as the corresponding lateral displacements. It is found that due to the external magnetic field the displacement of a transmitted beam is different from that of reflected one, even for a lossless symmetric configuration. Furthermore, within the chosen frequency band, when the incident angle is near the Brewster angle, the shift of a reflected wave can be large with nonzero reflectance, and can be positive or negative depending on the direction of the applied magnetic field and the incident wave.     

光波p分量在单轴晶体表面反射和折射的相位特性

根据单轴晶体的双折射和双反射性质,通过数值计算研究了光轴在入射面内并与晶体界面成任意角时光波p分量在单轴晶体表面反射和折射的相位特性.结果表明,光轴取向对相位变化有较大影响,光从光疏各向同性介质射入单轴晶体时,光轴方向改变反射光p分量的相位突变点,但对折射光p分量相位无影响.光从光密各向同性介质射入单轴晶体未发生全反射时,光轴方向同时影响p分量反射光和折射光的相位突变|发生全反射后,光轴方向影响反射光p分量的相位变化曲线.从单轴晶体出射到光疏各向同性介质未发生全反射时,光轴方向改变反射光p分量的相位跃变规律,折射光p分量在光轴方向和晶面成小角度时在布儒斯特角附近发生相位突变|发生全反射后,反射光p分量的相位变化曲线随光轴方向的改变发生较大变化.     

Net lateral shift of reflected beam due to surface plasmon resonance in Kretschmann configuration

When surface plasmon resonance is excited in Kretschmann configuration, the maximum Goos–Hänchen shift occurs at the resonant angle which is associated with the minimum value of reflectivity, but the maximum angular shift occurs at two incident angles beside the resonant angle. When the reflected beam is detected at Rayleigh range, the maximum net lateral shift of the reflected beam does not encounter the resonant angle and its magnitude is lager than that of Goos–Hänchen shift. Numerical simulation shows that theory agrees well with numerical results when the beam width is large enough.     

Reflected image of a strongly focused spot

We describe the reflection of a strongly focused beam from an interface between two dielectric media. If the beam is incident from the optically denser medium, the image generated by the reflected light is strongly aberrated. This situation is encountered in high-resolution confocal microscopy and data sampling based on solid immersion lenses and oil immersion objectives. The origin of the observed aberrations lies in the nature of total internal reflection, for which there is a phase shift between incident and reflected waves. This phase shift displaces the apparent reflection point beyond the interface, similarly to the Goos-H?nchen shift.     

基于耦合波理论设计偏振分束光栅

亚波长周期结构光栅具有传统光栅所不具有的特殊性质。针对通信中常用的1.55μm光波,采用严格耦合波理论分析了亚波长光栅的偏振分光特性,设计了对应的偏振分束光栅。所设计的光栅在入射角为56°时,透射消光比和反射消光比都大于9000,且在1.27μm~1.67μm全光波段内,入射角在51°~57°之间时,透射消光比和反射消光比都大于100,达到了宽带宽、宽角度以及透射消光比和反射消光比都较高的要求。     

Fringed sound fields and their interaction with liquid-solid interfaces

On the one hand, it is well known that Gaussian beams possess the ability to stimulate Rayleigh waves, resulting in the Schoch effect, a lateral beam displacement. This effect, often characterized by a reflected sound pattern consisting of two anti-phase beams, is due to the re-radiation of sound because of the stimulation of leaky Rayleigh waves. On the other hand, fringed sound beams are characterized by the fact that they consist of a number of neighboring anti-phase narrow beams. They are a first approximation of a sound field originating from a phased array of harmonic vibrating crystals in which each crystal vibrates in anti-phase compared to its neighbor. The individual lobes within the fringed sound pattern diverge much less than standard Gaussian beams of the same size. The current study investigates the interaction of fringed beams with a liquid-solid interface. It is found that under certain conditions, a fringed beam, incident at the Rayleigh angle, produces a reflected sound pattern that contains a wide lobe that is not fringed. It is also shown that under other conditions, contrary to the famous forward displacement of the reflected sound for incident Gaussian beams, a strong backward displacement occurs for fringed beams.     

Experimental investigation of bounded beam reflection from plane interfaces in the vicinity of leaky waves angles

The aim of this work is an experimental validation of the reflected and transmitted fields through a viscoelastic material when a bounded ultrasonic beam is incident at different angles. Special measurements are carried out when incidence is performed at some critical angles of the material used. So the propagation of leaky waves along the solid layer is investigated. The inverse procedure for optimizing model parameters from the noisy input-output data is performed using the maximum likelihood estimator.