Poly[(3-hydroxypropyl) oxirane] and poly[(4-hydroxybutyl)oxirane]: New hydrophilic polyether elastomers

Preparations of poly[(3-hydroxypropyl)oxirane] and poly[(4-hydroxybutyl)oxirane] are described. Three routes to poly[(3-hydroxypropyl)oxirane] are discussed, each of which involves the methanolysis of a polymeric ester. (3-Acetoxypropyl)oxirane, [3-(m-chlorobenzoyloxy)propyl]oxirane, and (3-chloropropyl)oxirane were polymerized using the AIEt₃/H₂O/AcAc initiator system. Poly[(3-acetoxypropyl)oxirane] and poly{[3-(m-chlorobenzoyloxy)propyl]oxirane} were converted directly to poly[(3-hydroxypropyl)oxirane] by methanolysis, the former under either acidic or basic conditions only. Poly[(3-chloropropyl)oxirane] was first converted to poly[(3-benzoyloxypropyl)oxirane] by treatment with tetrabutylammonium benzoate; subsequent basic methanolysis then afforded poly[(3-hydroxypropyl)oxirane]. Poly[(3-hydroxypropyl)oxirane] is a colorless elastomer which can be cast into tough, clear films from water or methanol. Poly[(4-hydroxybutyl)oxirane] was prepared from poly[(4-chlorobutyl)oxirane] by benzoyloxylation and subsequent methanolysis. Poly[(4-hydroxybutyl)oxirane] is insoluble in water, but is hydrophilic and can be cast into tough films from methanol or dimethylsulfoxide.     

Synthesis and characterization of novel ferrocenyl glycidyl ether polymer,ferrocenyl poly (epichlorohydrin) and ferrocenyl poly (glycidyl azide)

Poly (ferrocenyl glycidyl ether) was synthesized by polymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane (FcEpo) using toluene solution of methylaluminoxane as the catalyst. Copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin was used for the synthesis of another ferrocenyl based poly (epichlorohydrin). Ferrocenyl based poly (glycidyl azide), GAP, was synthesized by treatment of sodium azide with this copolymer in DMF as solvent at room temperature. The synthesized ferrocenyl based polymers were characterized by FT-IR, ¹HNMR, UV–Vis, TGA, DSC and GPC analysis. The UV–Vis spectra of synthesized polymers show the absorption band of ferrocene moiety at about 450 nm. The TGA and DSC analysis show that poly (ferrocenyl glycidyl ether) has good thermal stability. The TGA analysis shows that the copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin improved the thermal stability of the copolymer. The GPC analysis of poly (ferrocenyl glycidyl ether), ferrocenyl based poly (epichlorohydrin) and Ferrocenyl based poly (glycidyl azide) show the PDI between 1.14–1.17. The electrochemical behavior of synthesized polymers was investigated by cyclic voltammetry (CV) measurements. The CV curves of synthesized polymers show good electrochemical performance and there is one redox system with the single-electron reversible reaction that associated with ferrocene moiety in polymers structure. The anodic and cathodic peak currents increased with scan rate confirmed redox reactions in the system are kinetically fast diffusion-controlled reactions.     

Experimental and theoretical study of the reaction between bicyclo[2.2.1]hept-5-en-endo-2-ylmethylamine and 2-[(2-allylphenoxy)methyl]oxirane

In reactions of bicyclo[2.2.1]hept-5-en-endo-2-ylmethylamine with 2-[(2-allylphenoxy)methyl]oxirane alongside the product of amine monoalkylation a compound was obtained and isolated by chromatography on silica gel resulting from the reaction of the monoalkylated substance with the initial epoxide. The structure of new aminoalcohols and the regiochemistry of the oxirane opening were examined using IR, 1H NMR, and mass spectra. The features of the reaction mechanism were considered applying quantum-chemical calculations in the level of theory PCM/B3LYP/6-3aG(d).     

接枝于聚薄荷基丙烯醇的手性氨基醇的合成及其对Henry反应的不对称催化作用的研究

一种新型的旋光活性的氨基醇类聚合物被合成出来。以旋光活性聚薄荷基乙烯基酮为原料, 将聚薄荷基乙烯基酮用氢化铝锂还原后得到聚薄荷基丙烯醇(poly-MPO),poly-MPO与氢化钠反应后与环氧氯丙烷反应得到固载环氧丙烷的poly-MPO。将固载环氧丙烷的poly-MPO与各种类型的胺反应得到接枝于聚薄荷基丙烯醇的手性氨基醇(poly-MPO)-APO。将其应用在催化不对称Henry反应中得到了高产率、中等选择性的产物。     

Partially imidized poly[(amic ester)-alt-imide]: A novel polyimide pregursor

Partial imidization of poly[(amic ester)-alt-(amic acid)], a precursor for the “strictly alternating” copolyimides, was performed via selective chemical imidization of amic acid units in the copolymer precursor. The resulting, poly[(amic ester)-alt-imide], showed superior properties such as an excellent solution stability, good processibility and improved optical transparency, which are essential for the use as a precursor for the polyimide.     

(S)-2-[(R)-fluoro(phenyl)methyl]oxirane: a general reagent for determining the ee of alpha-chiral amines

(S)-2-[(R)-Fluoro(phenyl)methyl]oxirane is a new, synthetic, yet enantiopure, chiral resolution reagent, readily obtained from enantiopure (2S,3S)-phenylglycidol, that reacts with a variety of alpha-chiral primary and secondary amines in a straightforward manner through a regioselective ring-opening. Diastereomeric products are easily identified and quantified by (19)F, (1)H, and (13)C NMR and by HPLC, which makes this fluorinated compound a most versatile reagent for the analysis of scalemic mixtures of amines. [reaction: see text]     

Photolabeling studies of polymer–cell surface interaction. Evaluation of 3-[(4-azidophenyl)dithio]propionic acid as a polymer-bound photolabel

3-[(4-Azidophenyl)dithio]propionic acid ( 1a ) was prepared in four steps from 4,4′-diamino-diphenyldisulfide. Attachment of 1a to poly[(3-hydroxypropyl)oxirane] was accomplished under very mild conditions via an acid-catalyzed caarbodiimide coupling. Photolysis of polymer-bound 1a with an electronic flash unit proceeded without detectable disulfide bond cleavage. Mild reduction of the disulfide bond of an analogue of 1a which carried no azido group confirmed that 1a should be useful in photolabeling studies of polymer–cell surface interaction.     

Synthesis and characterization of semi-interpenetrating polymer network based on poly(dimethylsiloxane) and poly[2-(dimethylamino)ethyl methacrylate]

A semi-interpenetrating polymer network (semi-IPN) based on poly(dimethylsiloxane) and poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) was prepared. The material obtained was characterized by infrared spectrometry, differential scanning calorimetry, thermogravimetric analysis and scanning electronic microscopy. The results indicated the presence of PDMAEMA into the semi-IPNs. Only the network with the highest amount of crosslinker [(3-chloropropyl)trimethoxysilane] was stable in water. To evaluate the hydrophilic/hydrophobic character of the obtained material, swelling measurements were performed for the stable network in water and in toluene. The semi-IPN was able to adsorb about 34 % in mass of water, indicating that an appropriate hydrophylic/hydrophobic balance was obtained. That behavior is desirable since the material was designed for metal adsorption from aqueous medium, without a lost in the ability to swell in less polar solvents.     

Poly(β-Amino acids). VI. Synthesis and conformational properties of poly[(r)-3-pyrrolidinecarboxylic acid]

Racemic and optically active 3-pyrrolidinecarboxylic acids (β-proline) were synthesized, and their polymers, poly[(RS)-β-proline] and poly[(R)-β-proline], were prepared by the polycondensation reaction of the p-nitrophenyl esters. Model compounds, N-cyclopentylcarboxylic acid pyrrolidide and N-cyclopentylcarbonyl-(R)-3-pyrrolidinecarboxylic acid pyrrolidide, were synthesized to elucidate the conformation of the polymer. The solution properties of poly[(R)-β-proline] and the model compounds were investigated by means of circular dichroism (CD) and NMR spectroscopy. The spectral patterns of the polymer and model compounds were similar in various solvents. Poly[(R)-β-proline] and poly[(RS)-β-proline] showed identical NMR spectra. These results suggest that poly[(R)-β-proline] may exist in a random conformation consisting of mixtures of cis and trans amide bonds. The conformational study of cyclopentanecarboxylic acid pyrrolidide by NMR spectroscopy with a shift reagent, Eu(fod)₃, in CDCl₃ implied that the plane containing the amide group bisects the cyclopentane ring. This suggests that each amide plane in the polymer in chloroform may also bisect the pyrrolidine ring.     

Thermal degradation of poly[(tetramethyl-p-silphenylene) siloxane]

For the purpose of studying the mechanism of thermal degradation of poly[(tetramethyl-p-silphenylene) Siloxane] (poly TMPS) a series of polymers with silphenylene and siloxane bonds in the main chain were prepared and subjected to thermogravimetry (TG) and pyrolysis study. Analyses of products from poly TMPS degradation (in vacuum at a constant temperature) by gas chromatography (GC), infrared (IR), nuclear magnetic resonance (NMR) spectroscopy, and gas chromatography-mass spectrometry (GC–MS) revealed that degradation occurs at the silphenylene bonds. The TG curves obtained in He for heating rates of 1,2,2.5,7.5, and 10°C/min were analyzed by the Ozawa method; activation energies of 39 ± 1 and 45 ± 2 kcal/mol were obtained respectively for the initial cleavage of the methyl side group and the later-stage scission of the main-chain silphenylene bond which leads to a major weight loss. The results agree with those obtained for other structurally similar polymers.     

The synthesis of poly(3,4-dihydroxystyrene) and poly[(sodium 4-styrenesulfonate)-co-(3,4-dihydroxystyrene)]

Poly(2-methoxy-4-vinylphenol), polyMVP, and poly[(sodium 4-styrenesulfonate)-co-(2-methoxy-4-vinylphenol)], poly(SSS/MVP), were synthesized by radical polymerization using Vazo-64 or tributylborane as initiator. Poly(3,4-dihydroxystyrene) and poly[(sodium 4-styrenesulfonate)-co-(3,4-dihydroxystyrene)] were obtained by demethylation of polyMVP and poly(SSS/MVP) using HBr and trimethylsilyl iodide, respectively. (Co)polymer structures were confirmed by ¹H and ¹³C NMR spectra. About 30 wt.-% gel formed in the polyMVP polymerizations, whereas only a small amount (0.5 mol-%) of gel formed in the copolymerizations.     

Ring-Expanded N-Heterocyclic Copper(I) Boryl Complexes: The Structures of [(6-Dipp)CuBcat], [(6-Dipp)CuBneop], and [(6-Dipp)CuBhex]

σ-Bond metathesis reactions between [(6-Dipp)CuOtBu] (6-Dipp=:C({Dipp}NCH₂)₂CH₂, Dipp=2,6-iPr₂−C₆H₃) and three diboranes gave access to three new copper(I) boryl complexes [(6-Dipp)CuBcat], [(6-Dipp)CuBneop], and [(6-Dipp)CuBhex] (cat=1,2-O₂C₆H₄; neop=(OCH₂)₂C(CH₃)₂; hex=OC(CH₃)HCH₂C(CH₃)₂O). Whilst [(6-Dipp)CuBcat] and [(6-Dipp)CuBneop] formed rapidly in toluene, access to [(6-Dipp)CuBhex] required heating to 60 °C for days. The complexes were characterised by single-crystal X-ray crystallography which showed in all three cases that the systems were monomers and distorted-linear at the copper atom. The stability of [(6-Dipp)CuBneop] was found to be comparable to that of [(IPr*)Cu-Bneop] (IPr*=1,3-bis(2,6-(diphenylmethyl)-4-methylphenyl)imidazol-2-ylidene); it persisted in solution for days with no sign of decomposition. [(6-Dipp)CuBhex] is a rare crystallographically characterised example of a complex containing a boryl anion supported by the hexylene glycolato ligand.     

Kinetics and mechanism of the formation of poly[(1,1,3,3-tetramethyldisiloxanyl)ethylene] and poly(methyldecylsiloxane) by hydrosilylation

The kinetics of the formation of poly(carbosiloxane), as well as of alkyl-substituted poly(siloxane), by Karstedt's catalyst catalyzed hydrosilylation were investigated. Linear poly(carbosiloxane), poly[(1,1,3,3-tetramethyldisiloxanyl)ethylene], (PTMDSE), was obtained by hydrosilylation of 1,3-divinyltetramethyldisiloxane (DVTMDS) and 1,1,3,3-tetramethyldisiloxane (TMDS), while alkyl-substituted poly(siloxane), poly(methyldecylsiloxane), (PMDS), was synthesized by hydrosilylation of poly(methylhydrosiloxane) (PMHS) and 1-decene. To investigate the kinetics of PTMDSE formation, two series of experiments were performed at reaction temperatures ranging from 25 to 56 °C and with catalyst concentrations ranging from 7.0 × 10⁻⁶ to 3.1 × 10⁻⁵ mol Pt/mol CHCH₂. A series of experiments was performed at reaction temperatures ranging from 28 to 48 °C, with catalyst concentrations of 7.0 ×10⁻⁶ mol of Pt per mol of CHCH₂, when kinetics of PMDS formation was investigated. All reactions were carried out in bulk, with equimolar amounts of the reacting Si H and CHCH₂ groups. The course of the reactions was monitored by following the disappearance of the Si H bands using quantitative infrared spectroscopy. The results obtained showed typical first order kinetics for the PTMDSE formation, consistent with the proposed reaction mechanism. In the case of PMDS an induction period occurred at lower reaction temperatures, but disappeared at 44 °C and the rate of Si H conversion also started to follow the first-order kinetics. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2246–2258, 2007     

Synthesis,characterization and ionic conductivity of poly[(oligoethylene oxide) ethoxysilane] and poly[(oligoethylene oxide) ethoxysilane]/(EuCl3)0.67

Poly[(oligoethylene oxide) ethoxysilane)] ( I ) and poly[(oligoethylene oxide) ethoxysilane)]/(EuCl₃)_0.67 ( II ) were synthesized by reacting tetraethoxysilane with oligo(ethylene glycol) of molecular weight 400 and oligo(ethylene glycol)400/(EuCl₃)_0.317, respectively. The products so obtained are very transparent and rubbery. By Fourier transform infrared and Raman spectroscopy studies and by using analytical results it was concluded that these products are crosslinked macromolecular materials where the Si atom is bonded to one OEt group and to three poly(ethylene oxide) 400 chains. Scanning electronic microscopy studies showed that the presence of EuCl₃ in polymer host significantly affects the morphology of the material. Laser luminescence investigations on (II) showed that Eu³⁺ ion in the polymer host is accommodated in two different types of sites having a distorted C_2v symmetry. Moreover, the ionic conductivity of these systems was investigated and the data were satisfactorily fitted by the empirical Vogel Tamman Fulcher equation. At 70°C the conductivities of ( I ) and ( II ) were 9 × 10⁻⁶ and 14.3 × 10⁻⁶ Ω⁻¹ cm⁻¹ respectively.     

Conformational study of isotactic poly[(S)-5-methyl-1-heptene] and poly[(S)-2-methylbutyl vinyl ether] by IR spectroscopy

Infrared (IR) investigation of structurally analogous optically active polymers such as poly[(S)-5-methyl-1-heptene (1)] and poly[(S)-2-methylbutyl vinyl ether (2)] was carried out in the solid state, in the molten state, and in solution. Vibrational data are in accordance with the existence of helical conformations in solution and in the molten state for both polymers, confirming the previous suggestions based on optical rotation measurements. In particular, an accurate examination of the spectral region between 850 and 700 cm^?1, where characteristic absorptions of the sec-butyl group occur, enables us to assign the medium intensity band at 827 cm^?1 (present in both polymers in the solid state) to the GTTG^?T conformation of the side chains.     

Grafting BSA onto poly[(L-lactide)-co-carbonate] microspheres by click chemistry

Model protein bovine serum albumin (BSA) was covalently grafted onto poly[(L-lactide)-co-carbonate] microsphere surfaces by "click chemistry." The grafting was confirmed by confocal laser scanning microscopy and X-ray photoelectron spectroscopy. The maximum amount of surface-grafted BSA was 45 mg x g(-1). The secondary structure of the grafted BSA was analyzed by FTIR and the results demonstrated that the grafting did not affect protein structure. This strategy can also be used on microspheres prepared from poly(L-lactide)/poly[(L-lactide)-co-carbonate] blend materials.     

Polymeric organosilicon system VIII. Synthesis of poly[(disilanylene)diethynylene] with highly conducting properties

The reaction of bis(trimethylsilyl)butadiyne with 2 equiv. of methyllithium, followed by 1,2-dichloro-1,2-dimethyldiphenyl- or 1,2-dichloro-1,2-diethyldimethyldisilane gives poly[(1,2-dimethyldiphenyldisilanylene)diethynylene] (II) or poly[(1,2- diethyldimethyldisilanylene)diethynylene] (III), respectively. Films of II and III become conducting when treated with SbF₅ vapor.     

Synthesis and characterization of poly[(4-vinylphenyl)dimethyl- silane]-b-polybutadiene-b-poly[(4-vinylphenyl)dimethylsilane] (PVPDMS-b-PBd-b-PVPDMS)

The novel functionalized triblock copolymers,poly[(4-vinylphenyl)dimethylsilane]-b-polybutadiene-b-poly[(4-vinylphenyl)-dimethylsilane] (PVPDMS-b-PBd-b-PVPDMS),were synthesized by anionic polymerization method using high vacuum technique. The hydrocarbon-soluble dilithium initiator synthesized from l,3-di[l-(methylphenyl)ethenyl]benzene(MPEB) was used to synthesize polybutadiene(PBd) precursors and the triblock copolymers in the presence of sec-BuOLi.The precursors and copolymers were characterized by size exclusion chromatography(SEC),~1HNMR and DSC techniques.     

Synthesis,characterization, and photolysis of poly[3,5-di-tert-butyl-4-[(2,4,6-tri-tert-butylphenyl)oxalato]phenylacetylene], a photochemical polyradical precursor

A photochemical precursor to a pendant conjugated polyradical has been synthesized, poly[3,5-di-tert-butyl-4-[(2,4,6-tri-tert-butylphenyl)oxalato]phenylacetylene], 3 . Irradiation of 3 at 77 K in the solid state at < 300 nm yielded poly(3–5-di-tert-butyl-2-oxyphenyl acetylene), 2 , with 30–40% of the expected number of radical spins. Spin yields on the surface of solid samples appears to be considerably higher. Electron spin resonance experiments showed no evidence of cooperative exchange interaction between the pendant spins. Computational modeling indicated that a major reason for the failure of this and other polyphenylacetylenes to show ferromagnetic exchange between spins is the substantial twisting of the polyacetylene backbone required by steric interactions, leading to deconjugation and a loss of exchange interaction between pendant radicals along the chain. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2167–2176, 1997     

Synthesis of poly(oxyethylene phosphonate)s bearing oxirane groups in the side chain

The interaction between poly(oxyethylene phosphonate)s and 1,2-epoxy-7-octene has been investigated. It has been established that in the presence of benzoyl peroxide there proceeds a selective addition of the P( )H group to the C()C double bond. Poly(oxyethylene phosphonate)s bearing oxirane groups in the side chain have been synthesized. The new polymers can be used as polymer carriers of drugs. © 1997 John Wiley & Sons, Inc.