Ternary microemulsions of vinylic and acrylic monomers

Ternary systems consisting of sodium dodecyl sulfate (SDS) as surfactant, water and several vinyl and acrylic monomers [vinyl acetate (VAc), acrylonitrile (ACN), ethyl acrylate (EtA), butyl acrylate (BuA), 2-ethylhexyl acrylate (EHA), methyl methacrylate (MMA), butyl methacrylate (MMB) and styrene (St)] were studied. The solubilization of monomer in aqueous solutions of SDS was found to be dependent on its structure and concentration. The molar specific solubility was observed to decrease with hydrophobicity and increase with polarity of monomer, that is, it was lowest for St, EHA and highest for MMA, EtA. The NMR and fluorescence studies indicate that solubilization occurred at a different domain of the interfacial layer. The hydrophobic monomers are solubilized toward the hydrocarbon interior of the micelles whereas the hydrophilic ones, toward the hydrated tail of the surfactant. The penetration of monomers into the oil-in-water interface is limited because the screening of charged ions of emulsifier is not operative. A relationship between the persulfate initiator decomposition rate and the lability of the α-hydrogen linked to the substituted carbon of the double bond was established. The initiator productivity was the highest for MMA (lacking such α-hydrogen) and the lowest for VAc and St, the monomers in which the C-H_α bond is the most reactive.     

Polymerization of coordinated monomers. XIV. Systematic deviations from alternating regulation in copolymerization of methyl methacrylate with styrene in the presence of metal halides

Methyl methacrylate (MMA) and styrene (St) copolymerize in the presence of zinc chloride at 3°C under photoirradiation. The contents of methyl methacrylate in the copolymers obtained at a [ZnCl₂]/[MMA] molar ratio of 0.4 are systematically larger than 53 mole %, which is the limiting value at a small feed ratio of methyl methacrylate. The resulting copolymers are confirmed as the sole products and not the mixtures by thin layer chromatography. The effect of dilution of the monomer feed mixture with toluene on copolymer composition suggests that it depends chiefly on the feed concentration of styrene and hardly at all on monomer feed ratios. Copolymerizations are also conducted in the presence of stannic chloride at ?17°C under photoirradiation and in the presence of ethylaluminium sesquichloride at 0°C with spontaneous initiation. The contents of methyl methacrylate in both copolymers obtained at feed ratios lower than 60 mole % almost correspond to the 1:1 alternating copolymer and increase systematically with higher feed ratios. The systematic deviations of copolymer composition obtained in the presence of metal halides are reasonably interpreted by the participation of the binary molecular complex composed of metal halide and methyl methacrylate in the polymerization of the ternary molecular complex composed of metal halide, methyl methacrylate, and styrene.     

Vinyl polymerization. 413. Polymerization of vinyl monomer initiated by poly(vinylbenzyltrimethyl)-ammonium chloride

The polymerization of vinyl monomer initiated by an aqueous solution of poly(vinylbenzyltrimethyl)ammonium chloride (Q-PVBACI) was carried out at 85°C. Styrene, p-chlorostyrene, methyl methacrylate, and i-butyl methacrylate were polymerized, whereas acrylonitrile and vinyl acetate were not. The effects of the amounts of vinyl monomer, Q-PVBACI, and water on the conversion of vinyl monomer were studied. The overall activation energy in the polymerization of styrene was estimated as 79.1 kJ mol^?1. The polymerization proceeded through a radical mechanism. The selectivity of vinyl monomer was discussed by “a concept of hard and soft hydrophobic areas and monomers.”     

Polymerization of vinyl monomers initiated by organoaluminium compounds/benzoyl peroxide systems

The free-radical polymerization of methyl methacrylate (MMA) initiated by systems comprizing benzoyl peroxide (BPO) and different organoaluminium compounds (OACs) has been studied. The influence of the type of OAC, concentration of components of the initiation system, temperature, and time on the reaction yield have been determined. Systems containing BPO and diethylaluminium chloride (Et₂AlCl) have been found to enable us to obtain, in high yields at room temperature, of homopolymers of MMA, methyl acrylate, acrylonitrile (AN), vinyl acetate, and the alternating AN/styrene (St) copolymer; they are, however, not very active in the homopolymerization of St and vinyl chloride. Factors affecting the polymerization yield have been discussed in terms of the mechanism of the reaction between BPO and OACs, reactivity of alkyl radicals formed in these systems, and catalytic effect of OAC in the propagation step.     

A novel acrylate carrying a hindered phenol moiety as monomer and terminator in radical polymerization

Radical polymerizations of methyl methacrylate (MMA), styrene (St), and vinyl acetate (VAc) were carried out in the presence of a novel phenyl acrylate derivative bearing a hindered phenol moiety (HPA). It has been clarified that HPA acts as a retarder and inhibitor for the polymerizations of MMA and VAc, respectively, and that in the polymerization of St it behaves as a monomer to give a copolymer. These additive effects were interpreted in terms of intramolecular transfer of the phenolic hydrogen in competition with propagation of the HPA radical to monomers. © 1994 John Wiley & Sons, Inc.     

Polymerization of vinyl monomers by alkali metal–thiobenzophenone complexes

The polymerization of vinyl monomers by use of alkali metal (Li, Na, K)–thiobenzophenone complexes was studied. Monoalkali metal complexes of thiobenzophenone (thioketyls) induced the polymerization of vinyl monomers such as acrylonitrile (AN) and methyl methacrylate (MMA), and dialkali metal complexes of thiobenzophenone (dianion) induced the polymerization of styrene (St), butadiene (Bd), and isoprene (Ip) as well as AN and MMA. The polymerization of MMA with the dianion was initiated by both the mercaptide and the carbanion of the dianion, but that of styrene was initiated by the carbanion alone. In the case of polymerization of MMA by the thioketyl, the initial rate of polymerization depended on the catalyst concentration and the square of the monomer concentration. Similar results were obtained in the case of the dianion. The polymer yield increased with increasng polarity of sovents. In the copolymerization of AN with MMA, the copolymer obtained consisted almost of AN units. From these results, it was concluded that the polymerization proceeded by anionic mechanisms.     

Vinyl polymerization. 416. Polymerization of vinyl monomer initiated by polyethyleneglycol

The polymerization of vinyl monomer initiated by polyethyleneglycol (PEG) in aqueous solution was carried out at 85°C with shaking. Acrylonitrile (AN), methyl methacrylate (MMA), and methacrylic acid were polymerized by PEG–300 (M?_n = 300), whereas styrene was not. The effects of the amounts of monomer and PEG, the molecular weight of PEG, and the hydrophobic group at the end of PEG molecule on the polymerization were studied. The selectivity of vinyl monomer and the effect of the hydrophobic group are discussed according to “the concept of hard and soft hydrophobic areas and monomers.” The kinetics of the polymerization was investigated. The overall activation energy in the polymerization of AN was estimated as 37.9 kJ mol^?1. The polymerization was effected by a radical mechanism.     

End‐linked amphiphilic polymer conetworks: Synthesis by sequential atom transfer radical polymerization and swelling characterization

Conetworks based on end‐linked homopolymers and amphiphilic gradient copolymers were synthesized by the atom transfer radical polymerization (ATRP) of 2‐(dimethylamino)ethyl methacrylate (DMAEMA, hydrophilic monomer), methyl methacrylate (MMA, hydrophobic monomer), and ethylene glycol dimethacrylate (EGDMA, hydrophobic cross‐linker). Sequential, rather than step‐wise polymerizations, were performed to enhance the livingness of the polymerization, particularly for the end‐linking step, and to ultimately obtain conetworks based on gradient rather than pure block copolymers. Amphiphilic conetworks based on end‐linked MMA‐DMAEMA‐MMA gradient copolymers of different compositions were successfully synthesized as confirmed by the narrow molecular weight distributions of the linear precursors, the rigidity of the amphiphilic conetwork products and the low sol‐fraction extracted from the conetworks. Similarly successful was the ATRP synthesis of an end‐linked conetwork based on a DMAEMA‐MMA statistical copolymer and of a randomly cross‐linked conetwork that resulted from the simultaneous terpolymerization of DMAEMA, MMA and EGDMA. An amphiphilic conetwork based on an end‐linked DMAEMA‐MMA‐DMAEMA gradient copolymer presented a less rigid, mucous‐like, texture. The degrees of swelling (DS) in tetrahydrofuran of all the conetworks were higher than those measured in pure water, whereas the aqueous DS values increased by lowering the pH and increasing the DMAEMA content of the conetworks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1878–1886, 2010     

Transformation of “living” carbocationic and other polymerizations to controlled/“living” radical polymerization

Transformation of “living” carbocationic polymerization of styrene and isobutene to controlled atom transfer radical polymerization (ATRP) is described and formation of the corresponding AB and ABA block copolymers with styrene (St), methyl methacrylate (MMA, methyl acrylate (MA) and isobornyl acrylate (IBA) was demonstrated. A similar approach was applied to the cationic ring opening polymerization of tetrahydrofuran leading to the AB and ABA block copolymers with St, MMA and MA using ATRP. Site transformation approach was also used for the ring opening metathesis polymerization of norbornene and polycondensation systems using polysulfone as an example. In both cases, AB and ABA block copolymers were efficiently formed with styrene and acrylates.     

Long-lived polymer radicals. IV. Reactions of poly(N-methylacrylamide) and poly(N-methylmethacrylamide) radicals with binary mixtures of vinyl monomers

N-methylacrylamide (NMAAm) and N-methylmethacrylamide (NMMAm) were polymerized to give polymer microspheres containing living propagating radicals. The microsphere polymer radicals were allowed to react with some binary mixtures of vinyl monomers including alternating copolymerization combinations. The reaction processes were investigated by ESR spectroscopy. In the poly(NMMAm) radical/methyl methacrylate (MMA)/styrene (St) system, the propagating radical from MMA was mainly observed at the higher MMA concentration, while polySt radical prevailed at the lower MMA concentration. In the poly(NMMAm) radical/α-methylstyrene (α-MeSt)/diethyl fumarate system, the α-MeSt radical was exclusively observed, while the maleic anhydride (MAn) radical was predominantly observed in the α-MeSt/MAn system. In the MAn/diphenylethylene system, the propagating radicals from both monomers were observed at comparable concentrations. The poly(NMAAm) microsphere radical behaved differently in the reaction with the MMA/St mixture. The poly(NMAAm) microsphere was found to incorporate preferentially St, leading to formation of the St radical. The St preference was enhanced in the St/cyclohexyl methacrylate (CHMA) system. These results were in agreement with those of block copolymerization via the reaction of poly(NMAAm) radical with the MMA/St or CHMA/St mixture, where the compositions of the resulting polymers were analyzed by pyrolysis gas chromatography.     

Block copolymerization of 5,6-benzo-2-methylene-1,3-dioxepane with conventional vinyl monomers by ATRP method

Polystyrene-block-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PSt-b-PBMDO), poly(methyl methacrylate)-block-PBMDO (PMMA-b-PBMDO) and poly(methyl acrylate)-block-PBMDO (PMA-b-PBMDO) were synthesized by two-step atom transfer radical polymerization (ATRP) of conventional vinyl monomers, then BMDO. First, the polymerization of St, or MMA, or MA was realized by ATRP with ethyl α-bromobutyrate (EBrB) as initiator in conjunction with CuBr and 2,2^′-bipyridine (bpy). After isolation, polymers with terminal bromine, PSt-Br, PMMA-Br and PMA-Br, were obtained. Second, the ATRP of BMDO was performed by using macroinitiator, PSt-Br (or PMMA-Br, PMA-Br) in the presence of CuBr/bpy. The structures of block copolymers were characterized by 1H NMR spectra. Molecular weight and polydispersity index were determined on gel permeation chromatograph. Among the block copolymers obtained, PMA-b-PBMDO shows the most narrow molecular weight distribution.     

Long-lived polymer radicals. III. Synthesis of block copolymer by the reaction of living poly(N-methylacrylamide) radical with some vinyl monomers

N-Methylacrylamide (NMAAm) was polymerized quantitatively by using di-tert-butyl peroxide as photosensitizer to be, for the most part, incorporated in living poly(NMAAm) radical. The living polymer radical reacted effectively with acrylate monomers to yield block copolymer. Longer alkyl chain of the acrylate monomer caused a decrease in the conversion of the second monomer. Methacrylate monomers, such as methyl methacrylate and cyclohexyl methacrylate, showed relatively low reactivities in comparison with acrylates. Styrene exhibited a much lower conversion. The resulting block copolymers showed different thermochromic behaviors in methyl benzoate from that of poly(NMAAm). This is explained on the basis of the difference between refractive indexes of the block copolymers and poly(NMAAm).     

Influence of hydrophobic monomers on secondary nucleation of hydroxyl‐functionalized latexes

The influence of butyl acrylate (BA) and methyl methacrylate (MMA) on hydroxyl functionalized latexes was investigated. The hydrophobicity of the monomer feed was varied via the BA/MMA ratio. In addition to monitoring the effect of hydrophobic monomer feed on secondary nucleation, the polymerization kinetics and final latex properties were also obtained for comparison. Five different BA to MMA molar ratios were combined with five 2‐hydroxyethyl methacrylate (HEMA) concentrations (0, 10, 20, 30 and 40 mol% in monomer composition). All latexes were synthesized through seeded semibatch emulsion polymerization process. Particle size distributions and average particle sizes of the latexes were determined by dynamic light scattering (DLS) and qualitatively compared with transmission electron microscope (TEM) images. The BA to MMA ratio significantly influences the boundary HEMA concentration at which homogeneous secondary nucleation occurs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2190–2202     

Donor–acceptor complexes in copolymerization. XLIX. Cationic polymerization of donor monomers in presence of polar solvents and acrylic monomers. A revised mechanism for polymerization of comonomer complexes

α-Methylstyrene (MS) and isobutyl vinyl ether (VE) readily polymerize, styrene (S) polymerizes to a small extent, and isobutylene (IB), butadiene (BD), and isoprene (IP) fail to polymerize in the presence of catalytic amounts of AlCl₃ when propionitrile, ethyl propionate, and methyl isobutyrate are used as reaction media. MS polymerizes readily and S polymerizes with difficulty in the presence of AlCl₃ to yield homopolymers when acrylonitrile (AN) is present and copolymers with ethyl acrylate (EA) and methyl methacrylate (MMA). VE readily homopolymerizes, while IB, BD, and IP fail to polymerize in the presence of AlCl₃ and the acrylic monomers. VE readily homopolymerizes, S and MS polymerize to a very small extent, and IB, BD, and IP do not polymerize in the presence of ethylaluminum sesquichloride (EASC) in polar solvents. VE readily homopolymerizes in the presence of EASC and the acrylic monomers. MS polymerizes to a small extent in the presence of EASC and the acrylic monomers to yield equimolar copolymers with EA and MMA and a mixture of cationic homopolymer and equimolar copolymer with AN. S yields equimolar copolymers in low yield in the presence of EASC and the acrylic monomers. IB, BD, and IP in the presence of EASC do not polymerize to any significant extent when EA is present, form AN-rich copolymers and yield poly(methyl methacrylate) in the presence of MMA. A revised mechanism is presented for the formation of cationic, radical, random, and alternating copolymers as well as alternating copolymer graft copolymers in the copolymerization of donor and acceptor monomers.     

以双硫酯为链转移剂的活性自由基聚合

合成并研究了两种双硫酯链转移剂的纯化方法 ,进行了多种单体以双硫酯为链转移剂的活性自由基聚合及嵌段共聚 .发现以PhC(S)SC(CH3) 2 Ph为链转移剂的效果比PhC(S)SCH(CH3)Ph好 ,聚合产物的多分散性系数较小 .引发剂与链转移剂的摩尔数比为 1∶3 5～ 1∶4 2时 ,得到多分散性系数小 ,实测分子量与理论分子量相近的聚合产物 .聚合物的分子量随时间和转化率的增加而增加 ,加入第二单体形成嵌段共聚物 ,具有活性聚合特征 .聚甲基丙烯酸酯大分子引发剂引发丙烯酸酯单体聚合时 ,聚合速度最快 .     

Direct synthesis of amphiphilic block copolymers, consisting of poly(methyl methacrylate) and poly(sodium styrene sulfonate) blocks through atom transfer radical polymerization

Amphiphilic block copolymers of methyl methacrylate (MMA) and sodium styrene sulfonate (SSNa) were successfully synthesized via direct atom transfer radical polymerization (ATRP) of SSNa. First, poly(sodium styrene sulfonate) (PSSNa) or poly(methyl methacrylate) (PMMA) macroinitiators were prepared using proper ATRP systems for each case. In some cases, functional initiators, which allow further reactions, were used. The macroinitiators were characterized and further used to synthesize PSSNa/PMMA block copolymers, by using proper solvent combinations, such as N,N-dimethylformamide/water or methanol/water at appropriate volume ratios, in order to ensure solubility of the synthesized amphiphilic copolymers. The molecular weight of the copolymers was determined by gel permeation chromatography, using water as eluent. By using a combination of analytical techniques like ¹H NMR, FTIR and thermogravimetry, the chemical structure and the actual copolymer composition were determined. Since, the block copolymers were soluble in water, forming hydrophilic/hydrophobic domains in aqueous solution, their micellization behavior was further studied by pyrene fluorescence probing.     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

Novel amphiphilic graft copolymers bearing hydrophilic poly(acrylic acid) backbones and hydrophobic poly(butyl methacrylate) side chains

A novel amphiphilic graft copolymer consisting of hydrophilic poly(acrylic acid) backbones and hydrophobic poly(butyl methacrylate) side chains was synthesized by successive atom transfer radical polymerization followed by hydrolysis of poly‐(methoxymethyl acrylate) backbone. A grafting‐from strategy was employed for the synthesis of graft copolymers with narrow molecular weight distributions (polydispersity index < 1.40). Hydrophobic side chains were connected to the backbone through stable C? C bonds instead of ester connections. Poly(methoxymethyl acrylate) backbone was easily hydrolyzed to poly(acrylic acid) backbone with HCl without affecting the hydrophobic side chains. The amphiphilic graft copolymer could form stable micelles in water. The critical micelle concentration in water was determined by a fluorescence probe technique. The morphology of the micelles was preliminarily explored with transmission electron microscopy and was found to be spheres. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6857–6868, 2006     

Biobased Polymers via Radical Homopolymerization and Copolymerization of a Series of Terpenoid-Derived Conjugated Dienes with exo-Methylene and 6-Membered Ring

A series of exo-methylene 6-membered ring conjugated dienes, which are directly or indirectly obtained from terpenoids, such as β-phellandrene, carvone, piperitone, and verbenone, were radically polymerized. Although their radical homopolymerizations were very slow, radical copolymerizations proceeded well with various common vinyl monomers, such as methyl acrylate (MA), acrylonitrile (AN), methyl methacrylate (MMA), and styrene (St), resulting in copolymers with comparable incorporation ratios of bio-based cyclic conjugated monomer units ranging from 40 to 60 mol% at a 1:1 feed ratio. The monomer reactivity ratios when using AN as a comonomer were close to 0, whereas those with St were approximately 0.5 to 1, indicating that these diene monomers can be considered electron-rich monomers. Reversible addition fragmentation chain-transfer (RAFT) copolymerizations with MA, AN, MMA, and St were all successful when using S-cumyl-S’-butyl trithiocarbonate (CBTC) as the RAFT agent resulting in copolymers with controlled molecular weights. The copolymers obtained with AN, MMA, or St showed glass transition temperatures (T_g) similar to those of common vinyl polymers (T_g ~ 100 °C), indicating that biobased cyclic structures were successfully incorporated into commodity polymers without losing good thermal properties.     

The thermal degradation of copolymers of vinyl acetate with methyl methacrylate and other monomers

The thermal degradation of copolymers of vinyl acetate with methyl methacrylate, styrene and ethylene has been investigated using thermal volatilization analysis and thermogravimetry, together with analysis of volatile and involatile degradation products. All three copolymer systems show some of the features characteristic of the homopolymers of the monomers concerned. There is evidence, however, for an intramolecular lactonization process in VA—MMA copolymers, involving reaction of adjacent VA and MMA units with elimination of methyl acetate. This reaction occurs less readily than the analogous process in vinyl chloride—MMA copolymers. Mechanisms of the various degradation reactions are discussed.