Studies on the kinetics of ceric-thiourea initiated aqueous polymerization of methyl methacrylate—II. Mechanistic features in strongly acid solutions

The kinetics of ceric-thiourea initiated aqueous polymerization of methyl methacrylate in 1 M H₂SO₄ have been studied. Ceric ion and thiourea initially form an 1:1 complex which then reacts with uncomplexed ceric ion to form the initiating thiocarbamido radicals. The termination is predominantly biomolecular below an initial ceric concentration of 0.66 × 10^?2 M (depending upon the rate of initiation). At higher initial ceric concentrations, polymer radicals are terminated overwhelmingly by ceric ions. Substituted thioureas reduce the rate of polymerization according to the order of increasing electron density on the sulphur atom. The overall activation energy of polymerization is 12.1 kcal/mol in the region of bimolecular termination and 10.2 kcal/mol in the region of metal ion termination.     

Aqueous polymerization of methyl methacrylate initiated by the redox system Ce(IV)–isopropyl alcohol. Kinetics and molecular weight

Polymerization of methyl methacrylate was carried out in aqueous nitric acid in the temperature range 26–40°C, with the redox initiator system ceric ammonium nitrate–isopropyl alcohol. A short induction period was observed, as well as the attainment of a limiting conversion, and the total ceric ion consumption with reaction time. The reaction orders were 1/2 and 3/2 with respect to the IPA and monomer concentration, respectively, within the range (3–5) × 10^?3M of Ce(IV). But at lower Ce(IV) concentration (≤ 1 × 10^?3M), the order with respect to monomer and Ce(IV) changed to 1 and 1/2, respectively. The rate of ceric ion disappearance was first order with respect to Ce(IV) concentration and (R_Ce)^?1 was proportional to [IPA]^?1. Both the rate of polymerization and the rate of ceric ion consumption increase with rise in temperature. The average-molecular weight can be controlled by variations in IPA, Ce(IV), and monomer concentrations, and in temperature. A kinetic scheme involving oxidation of IPA by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by bimolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Cerium (IV)-2-chloroethanol redox-pair initiated polymerization of acrylamide in aqueous medium

The kinetics of acrylamide polymerization has been investigated by employing cericammoniumnitrate-2-chloroethanol redox pair under nitrogen atmosphere at 30 ± 1°C. The rate of monomer disappearance is directly proportional to the concentration of 2-chloroethanol (1.0 × 10^?2 ? 10.0 × 10^?2 mol. dm^?3) and is inversely proportional to the ceric ion concentration (2.5 × 10^?3 ? 10.0 × 10^?3 mol. dm^?3) but shows square dependence to the concentration of monomer (5.0 × 10^?2 ? 25.0 × 10^?2 mol. dm^?3). The rate of ceric ion disappearance is directly proportional to the initial concentration of ceric ion and 2-chloroethanol but independent of acrylamide concentration. The viscometric average molecular weight (M _v) decreases on increasing the concentration of ceric ion and increases on increasing the concentrations of acrylamide and 2-chloroethanol. A tentative mechanism has been proposed.     

Graft polymerization kinetics of acrylamide initiated by ceric nitrate–dextran redox systems

The kinetics of the graft polymerization of acrylamide initiated by ceric nitrate—dextran polymeric redox systems was studied primarily at 25°C. Following an initial period of relatively fast reaction, the rate of polymerization is first-order with respect to the concentrations of monomer and dextran and independent of the ceric ion concentration. The equilibrium constant for ceric ion—dextran complexation K is 3.0 ± 1.6 l./mole, the specific rate of dissociation of the complex, k_d, is 3.0 ± 1.2 × 10^?4 sec.^?1, and the ratio of polymerization rate constants, k_p/k_t, is 0.44 ± 0.15. The number-average degree of polymerization is directly proportional to the ratio of the initial concentrations of monomer and ceric ion and increases exponentially with increasing extent of conversion. The initial rapid rate of polymerization is accounted for by the high reactivity of ceric ion with cis-glycol groups on the ends of the dextran chains. The polymerization in the slower period that follows is initiated by the breakdown of coordination complexes of ceric ions with secondary alcohols on the dextran chain and terminated by redox reaction with uncomplexed ceric ions.     

Vinyl Polymerization Initiated by Ceric Ion–Ethyl Cellosolve Redox System in Aqueous Nitric Acid

Abstract

Polymerizations of methyl methacrylate (MMA) and acrylonitrile (AN) were carried out in aqueous nitric acid at 30°C with the redox initiator system ammonium ceric nitrate-ethyl cellosolve (EC). A short induction period was observed as well as the attainment of a limiting conversion for polymerization reactions. The consumption of ceric ion was first order with respect to Ce(IV) concentration in the concentration range (0.2–0.4) × 10^?2 M, and the points at higher and lower concentrations show deviations from a linear fit. The plots of the inverse of pseudo-first-order rate constant for ceric ion consumption, (k ¹)^?1 vs [EC]^?1, gave straight lines for both the monomer systems with nonzero intercepts supporting complex formation between Ce(IV) and EC. The rate of polymerization increases regularly with [Ce(IV)] up to 0.003 M, yielding an order of 0.41, then falls to 0.0055 M and again shows a rise at 0.00645 M for MMA polymerization. For AN polymerization, R _p shows a steep rise with [Ce(IV)] up to 0.001 M, and beyond this concentration R _p shows a regular increase with [Ce(IV)], yielding an order of 0.48. In the presence of constant [NO^? ₃], MMA and AN polymerizations yield orders of 0.36 and 0.58 for [Ce(IV)] variation, respectively. The rates of polymerization increased with an increase in EC and monomer concentrations: only at a higher concentration of EC (0.5 M) was a steep fall in R _p observed for both monomer systems. The orders with respect to EC and monomer for MMA polymerization were 0.19 and 1.6, respectively. The orders with respect to EC and monomer for AN polymerization were 0.2 and 1.5, respectively. A kinetic scheme involving oxidation of EC by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by biomolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Highly branched acrylamide graft copolymer

Acrylamide graft copolymerization onto poly(3-O-methacryloyl D -glucose) (PMG) as a backbone was performed by the ceric ion method. The number of polyacrylamide (PAM) chains grafted was dependent upon the concentration ratio of the redox catalyst system at constant acid concentration and increased in proportion to the ceric ion concentration. A maximum number of grafts obtained, for example, was 29 onto PMG (DP = 244) under the conditions [Ce⁴⁺]/[PMG] = 1/5, [H⁺] = 1.0 × 10^?2 mole/l. In other words, the graft frequency was 12 per 100 monomer units of PMG. Such a high frequency of the grafts was, however, greatly decreased when the acid concentration was increased. Characteristics of the highly branched structure were revealed by the relationship between intrinsic viscosity and graft frequency, which showed a downward curvature with the increasing graft frequency. Influences of acid and ceric ion concentrations on the copolymerization were kinetically evaluated. The rate of polymerization was found to be first-order with respect to ceric ion and proportional to the square of the reciprocal acid concentration. The result suggests that the graft frequency is dependent upon the rate of polymerization.     

Polymerization of acrylonitrile: Kinetics of the reaction initiated by the Fe2+/BrO3− redox system

The aqueous polymerization of acrylonitrile initiated by the bromate—ferrous redox system in aqueous sulfuric acid was studied under nitrogen atmosphere. The rate of polymerization increased with increasing concentration of ferrous in the range of 0.25-1 × 10^?2M. The percentage of conversion increased with increasing concentration of the catalyst, but beyond 2.5 × 10^?3M there was a decreasing trend in the rate of polymerization. The rate varied linearly with [monomer]. The initial rate of polymerization as well as the maximum conversion increased within the range of 1–2.5 × 10^?3M KBrO₃, but beyond 2.5 × 10^?3M the rate of polymerization decreased. The initial rate and limiting conversion increased with increasing polymerization temperature in the range 30–40°C; beyond 40°C they decreased. The effect of certain neutral salts, water-miscible solvents, complexing agents, and copper sulfate concentration on the rate of polymerization was investigated.     

Graft polymerization of acrylic monomers onto starch fractions. III. Effect of carbohydrate structure

Grafted PMMA was isolated by the acid hydrolysis method. Weight-average and number-average molecular weights were determined by gel permeation chromatography. The number-average molecular weight of the grafted chains was about 475,000 for amylopectin and 403,000 for amylose. The number of grafted chains (mmol) ranged from 2.4 × 10^?3 to 4.6 × 10^?3 for amylopectin graft copolymers and from 2.9 × 10^?3 to 6.8 × 10^?3 for those of amylose. These results were related to others obtained from ceric ion consumption studies. The values suggest that amylopectin, because of its complex structure, favors a higher consumption of ceric ion in homopolymerization reactions and inhibits the initiation reactions of the copolymerization.     

Kinetic model of reversible addition‐fragmentation chain transfer polymerization in microemulsions

A simplified kinetic model for RAFT microemulsion polymerization has been developed to facilitate the investigation of the effects of slow fragmentation of the intermediate macro‐RAFT radical, termination reactions, and diffusion rate of the chain transfer agent to the locus of polymerization on the control of the polymerization and the rate of monomer conversion. This simplified model captures the experimentally observed decrease in the rate of polymerization, and the shift of the rate maximum to conversions less than the 39% conversion predicted by the Morgan model for uncontrolled microemulsion polymerizations. The model shows that the short, but finite, lifetime of the intermediate macro‐RAFT radical (1.3 × 10^?4–1.3 × 10^?2 s) causes the observed rate retardation in RAFT microemulsion polymerizations of butyl acrylate with the chain transfer agent methyl‐2‐(O‐ethylxanthyl)propionate. The calculated magnitude of the fragmentation rate constant (k_f = 4.0 × 10¹–4.0 × 10³ s^?1) is greater than the literature values for bulk RAFT polymerizations that only consider slow fragmentation of the macro‐RAFT radical and not termination (k_f = 10^?2 s^?1). This is consistent with the finding that slow fragmentation promotes biradical termination in RAFT microemulsion polymerizations. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 604–613, 2010     

Aqueous polymerization of acrylonitrile initiated by the bromate–thiourea redox system

The aqueous polymerization of acrylonitrile initiated by an acidified bromate–thiourea redox system has been studied under nitrogen atmosphere. The rate of polymerization is independent of thiourea concentration over the range 2–9 × 10^?3M and reaches maximum at 9 × 10^?3M. The rate varies linearly with [monomer]. The initial rate of polymerization as well as the maximum conversion increases within the range of 4–22.5 × 10^?3M KBrO₃, but beyond 22.5 × 10^?3M the rate of polymerization decreases. The initial rate and the limiting conversion increases with increasing polymerization temperature in the range 30–45°C; and beyond 45°C they decrease. The effect of certain neutral salts, water-soluble solvents, and micelles of cationic, anionic, and nonionic surfactants on the rate of polymerization has been investigated.     

The Effect of Active Carbon on the Kinetics of Polymerization of Methyl Methacrylate

Rates of 2–2¹?azobisisobutyronitrile initiated polymerization of methyl methacrylate in benzene were determined at 77.2, 65.0, and 50.0°C. The variation of molecular weight of the polymer with temperature and conversion was also studied. At a fixed conversion of 2.0%, the molecular weight decreased from 2.05 × 10⁵ at 50°C to 1.4 × 10⁵ at 77.2°C. The ratio of the propagation rate coefficient to the square root of the termination rate coefficient was found to be 0.61, 0.397, and 0.374 at 77.2, 65.0, and 50.0°C, respectively, with an uncertainty of ±0.5°C in temperature. The effect of active carbon on the rates of polymerization at 77.2°C was measured. Rates of polymerization decreased in the presence of active carbon. For example, the initial rate of polymerization decreased from 7.8 × 10^?4 mole/(liter min) to 4.6 × 10^?4 mole/(liter min) when the carbon concentration was varied from 0 to 9.65 g/liter. The molecular weight of the polymer increased from an average of 1.4 × 10⁵ in the absence of carbon to 1.5 × 10⁵ when carbon was present.     

Molecular weight distribution studies. I. Radiation-induced polymerization of liquid α-methylstyrene

The concentration of water in purified and BaO-dried α-methylstyrene was found to be 1.1 × 10^?4M. The radiation-induced bulk polymerization of the α-methylstyrene thus prepared was studied in the temperature range of ?20°C to 35°C. The polymerization rate varied as the 0.55 power of the dose rate. The theoretical molecular weights and molecular weight distribution were calculated from a proposed kinetic scheme and these values were then compared with those found experimentally. The agreement between these two was reasonably close, and therefore it was concluded that, from the molecular weight distribution point of view, the proposed kinetic scheme for the cationic polymerization of α-methylstyrene is an acceptable one. The rate constant for chain transfer to monomer k_f changed with temperature and was found to be responsible for the decrease in the molecular weight of the polymer with increase in temperature. k_f and k_p at 20°C were found to be 0.95 × 10⁴ l./mole-sec and 0.99 × 10⁶ l./mole-sec, respectively.     

Kinetics of polymerization of N-tert-butylacrylamide. Part II

The effect of ferric chloride on the kinetics of the radical polymerization of N-tert-butylacrylamide has been investigated in methanol solution at 25°C, with the use of 4,4′-dicyano-4,4′-azodipentanoic acid as initiator. A shrinkage factor of 0.193 mmole polymerized for 1 mm contraction in a capillary of 1 mm diameter has been obtained from density measurements. In the absence of ferric chloride, rates of polymerization were found to be proportional to the concentration of monomer and to the square root of the initiator concentration. With ferric chloride present, the rate of polymerization becomes directly proportional to the initiator concentration and inversely proportional to the concentration of ferric salt. From measurements of the rates of production of ferrous iron, the specific rate constant of the initiation reaction has been found to be (1.8 ± 0.4) × 10^?6sec^?1 at 25°C, compared with a value of 7.63 × 10^?8 sec^?1 calculated from the kinetic data obtained with no ferric salt present. The value of the ratio k_p/k₄. where k_p is the propagation coefficient and k₄ is the velocity coefficient for termination by ferric chloride, has been calculated to be 6.0 × 10^?4 at 25°C, which is considerably smaller than the value found for the ferric chloride-terminated polymerization of acrylamide in water. This markedly lower value of k_p/k₄ has been attributed principally to the steric effect of the tert-butyl group on the magnitude of k_p.     

Aqueous polymerization of acrylamide initiated by acidic potassium permanganate–ascorbic acid redox system

The polymerization of acrylamide initiated by the acidic permanganate–ascorbic acid redox pair has been studied in aqueous media at 30 ± 0.2°C in nitrogen atmosphere. The initial rate of polymerization has been found to be proportional to nearly the first power of the catalyst KMnO₄ concentration within the range 6.0 × 10^?3–14.0 × 10^?3 mole/l. The rate is proportional to the first power of the monomer concentration within the range 4.00 × 10^?2–12.0 × 10^?2 mole/l. However, the rate of polymerization is independent of ascorbic acid concentration within the range 3.0 × 10^?3–6.0 × 10^?3 mole/l., but the further increase of the concentration depresses the rate of polymerization as well as maximum conversion. The initial rate increases but the maximum conversion decreases as the temperature is increased within the range 20–35°C. The overall energy of activation has been found to be 9.8 kcal/mole. The optimum amount of sulfuric acid is essential to initiate the polymerization but its presence in excess produces no effect either on the rate of reaction or the maximum conversion. Water-miscible organic solvents and salts, e.g., CH₃OH, C₂H₅OH, (CH₃)₂CHOH, KCl, and Na₂SO₄, depress the rate. Slight amounts of MnSO₄ · H₂O and a complexing agent NaF increase the rate of polymerization. Cationic and anionic detergents have been found to decrease and increase the rate, respectively, while nonionic surfactants have no effect on the rate of polymerization.     

Studies of redox polymerization. I. Aqueous polymerization of acrylamide by an ascorbic acid–peroxydisulfate system

The polymerization of acrylamide initiated by an ascorbic acid–peroxydisulfate redox system was studied in aqueous solution at 35 ± 0.2°C in the presence of air. The concentrations studied were [monomer] = (2.0–15.0) × 10^?2 mole/liter; [peroxydisulfate] = (1.5–10.0) × 10^?3 mole/liter; and [ascorbic acid] = (2.84–28.4) × 10^?4 mole/liter; temperatures were between 25–50°C. Within these ranges the initial rate showed a half-order dependence on peroxydisulfate, a first-order dependence on an initial monomer concentration, and a first-order dependence on a low concentration of ascorbic acid [(2.84–8.54) × 10^?4 mole/liter]. At higher concentrations of ascorbic acid the rate remained constant in the concentration range (8.54–22.72) × 10^?4 mole/liter, then varied as an inverse halfpower at still higher concentrations of ascorbic acid [(22.72–28.4) × 10^?4 mole/liter]. The initial rate increased with an increase in polymerization temperature. The overall energy of activation was 12.203 kcal/mole in a temperature range of 25–50°C. Water-miscible organic solvents depressed the initial rate and the limiting conversion. The viscometric average molecular weight increased with an increase in temperature and initial monomer concentration but decreased with increasing concentration of peroxydisulfate and an additive, dimethyl formamide (DMF).     

Kinetics of the γ-radiation-induced polymerization of ethylene in liquid carbon dioxide

The γ-radiation-induced polymerization of ethylene with the use of liquid carbon dioxide as a solvent, was studied from the viewpoint of kinetics. The polymerization was carried out at conversions less than 10% under the pressure ranging from 100 to 400 kg./cm.², dose rates 1.3 × 10⁴?1.6 × 10⁵ rad/hr., and temperatures of 20–90°C. The concentration of carbon dioxide varied up to 84.1 mole-%. The polymerization rate and the polymer molecular weight were observed to increase with reaction time. This observation, however, becomes less pronounced with increasing concentration of carbon dioxide and with rising temperature. The exponents of the pressure and the dose rate were determined to be 2.3 and 0.85 for the rate, and 2.0 and ?0.20 for the molecular weight, respectively. From the kinetic considerations for these results, the effect of carbon dioxide on the initiation and termination reaction in the polymerization was evaluated.     

Aqueous polymerization of methyl methacrylate initiated by peroxydisulfate–citric acid redox system catalyzed by silver ion

The kinetics of the aqueous polymerization of methyl methacrylate initiated by potassium peroxydisulfate–citric acid catalyzed by silver ion was investigated in nitrogen atmosphere. The rate of polymerization is proportional to the square root of peroxydisulfate concentration. The initial rate increases with increasing citric acid concentration up to 15 × 10^?3M, after which it decreases. The rate of polymerization also increases initially with monomer concentration and decreases at higher monomer concentration. The effects of temperature and the addition of some solvents and salts on the rate of polymerization have also been studied and a suitable kinetic scheme has been proposed for the reaction.     

Polymerization initiated by ylide: Polymerization of ethyl methacrylate with the use of 4-picolinium p-chloro phenacylide as initiator

The ylide 4-picolinium, p-chloro phenacylide-initiated thermal polymerization of ethyl methacrylate (EMA) was studied. 4-Picolinium p-chloro phenacylide induces the thermal polymerization of ethyl methacrylate at 65°C. The rate of polymerization (R_p) rose as the initiator concentration increased from 2 × 10^?3 to 4 × 10^?3 M and the initiating exponent was computed as 1.9. The R_p decreased as the concentration of ylide increased from 6 × 10^?2 to 1M. The greater initiator concentration also affected the molecular weight inversely. The polymerization was carried out at different temperatures and the overall activation energy was computed as 4.08 Kcal/mol. Polymerization was inhibited in the presence of hydroquinone as a radical scavenger. Kinetic studies and other data show that the overall polymerization takes place in a radical mechanism. The various kinetic parameters, such as the rate and average degree of polymerization, molecular weight, and energy of activation of the present system, were evaluated.     

Effect of amines on the ceric ion-initiated polymerization of vinyl monomers. I. Polymerization of acrylonitrile by ceric ion–triethylamine catalyst system

The polymerization of acrylonitrile was studied in aqueous solution with ceric ammonium sulfate in the presence of triethylamine as initiator at 30, 40, and 50°C. The rate of polymerization was found to be linear with the concentration of the amine and independent of ceric ion concentration. A reaction scheme involving initial complex formation between ceric ion and the amine and subsequent disproportionation of the conplex to produce free radicals is proposed for the initiation reaction. The termination step is postulated as involving oxidation of the polymer chains by ceric ions. The results have been explained in the light of the proposed reaction scheme.