MoCl5/EtAlCl2-catalysed nonmetathesis polymerization of norbornadiene

Norbornadiene was polymerized, in moderate yield by MoCl₅ or EtAlCl₂. By using both components together, an increase in reaction rates and in polymer yields were observed. By the optimization of the reaction conditions, 100% of polymer yield was achieved. For comparison, the polymerization of the NBD was also accomplished by using initiators such as AlCl₃, Et₃Al, AZBN, and n-butyl lithium. All the obtained polymers gave similar IR and NMR spectra indicating the presence of the polynortricyclene structures. Though they show different molecular weight distribution, the solubilities of the polymers (obtained using MoCl₅, AlCl₃, EtAlCl₂, and MoCl₅/EtAlCl₂) are very similar. DTA analyses show that the polymers (obtained by using MoCl₅/EtAlCl₂ pair or n-butyl lithium or Et₃Al) have high thermal stabilities whereas all the other polymers are unstable in air. © 1996 John Wiley & Sons, Inc.     

Synthesis of benzofurans in ionic liquid by a PdCl2-catalyzed intramolecular Heck reaction

PdCl₂-catalyzed intramolecular Heck reaction was conducted in ionic liquid, 1-n-butyl-3-methylimidazolium tetraborate ([BMIm] BF₄), substituted benzofurans were obtained in modest to satisfactory yields. The ionic liquid containing Pd catalyst can be used four times with a little loss of activity.     

氯化钯在氟化四丁基铵中当场生成纳米钯：一种高效、可回收的催化体系，在无配体和无溶剂条件下催化Suzuki-Miyaura反应

氯化钯在氟化四丁基铵中当场生成纳米钯,该钯催化剂在Suzuki-Miyaura交叉偶联反应中显示很高的催化效率。在氯化钯和氟化四丁基铵存在下,许多芳基卤代烃可以顺利与芳基硼酸发生偶联反应,得到中等到高的产率。此外,在Suzuki-Miyaura偶联反应中该氯化钯/氟化四丁基铵催化体系可以回收重复使用多次,并且芳基溴代烃可以在15-60分钟内反应完全。值得指出的是,该反应是在无溶剂、无配体和催化体系可回收重复使用的条件下进行的。这和无配体条件下TBAB中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应方法。该氯化钯/氟化四丁基铵催化反应的反应机理也进行了讨论。     

EASY LARGE-SCALE SYNTHESIS OF STERICALLY ENCUMBERED 2-IODOBIPHENYLS AND SOME DERIVATIVES THEREOF

The convenient one-pot reaction of o-bromofluorobenzene (1) with n-butyl lithium and aryl Grignard reagents followed by quenching with iodine affords substituted 2-iodobiphenyls (4) in yields of 45 to 71%. Lithiation of 4 followed by reaction with Me₂SiCl₂ affords the silanes ArSiMe₂Cl 7.     

Palladium and rhodium-catalyzed intramolecular [2+2+2] cycloisomerizations in molten tetrabutylammonium bromide

The cycloisomerization reaction of triacetylenic macrocycles 1 was carried out in molten n-Bu₄NBr using either the Wilkinson’s catalyst RhCl(PPh₃)₃, or PdCl₂ leading to good yields of the corresponding cycloisomerized compounds. It was possible to recycle the catalytic system. When PdCl₂/TBAB was used, palladium nanoparticles were identified by means of transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX).     

The kinetics reaction of 1-chloro-2,3-epoxypropane with n-butyl and iso-butyl alcohols

The reactions of 1-chloro-2,3-epoxypropane with n-butyl and isobutyl alcohols and their 3-chloro-2-hydroxypropyl ethers, respectively, in the presence of boron fluoride diethyl etherate catalyst are of the first order with regard to 1-chloro-2,3-epoxypropane as well as to the catalyst. In the catalyst concentration range of 1.4 to 47.3 mmol/l., the participation of the catalyst in the reaction is incomplete. The mechanism of the reactions resembles S_N2 in regard to changes of activation entropy and influence of dielectric constant of the reaction medium upon the reaction rate. The established values of K (the ratio of propagation to initiation rates) are suitable for calculating the compositions of the adducts obtained. The experimentally obtained yields of 3-chloro-2-hydroxypropyl ethers of lower alcohols are compared with those calculated from the kinetically determined values of K.     

Green oxidation of 2-imidazolines with tert-butyl hydroperoxide catalyzed by supported manganese(III) porphyrin in water

Green oxidation of 2-substituted imidazolines with tert-butyl hydroperoxide catalyzed by tetraphenylporphyrinatomanganese(III) chloride, [Mn(TPP)Cl], supported on polystyrene and silica bound imidazole is reported. A variety of 2-imidazolines were efficiently converted to their corresponding imidazoles by these catalytic systems in H₂O. Ultrasonic (US) irradiation enhanced the catalytic activity of these catalysts and higher product yields were observed at shorter reaction times. These catalysts were re-used several times without significant loss of their catalytic activities. The effect of reaction parameters such as catalyst amount, reaction temperature, and the effect of US irradiation on the catalytic activity was also investigated.     

Synthesis,characterization, and reactivity studies in ethylene polymerization of cyclometalated palladium(II) complexes containing terdentate ligands with N,C,N-donors

The reaction of [Na₂PdCl₄] with 3,5-bis(2-pyridoxy)toluene (L_pyH) in acetic acid yields the cyclometalated complex [PdCl(L_py-N, C, N)] (1). Complex 1 can be further converted into neutral species by metathesis reaction exchange of chloride by either iodide or thiocyanate to yield [PdX(L_py-N, C, N)] (X = I (2), SCN (3)). The chloride can be replaced by neutral ligands like pyridine or acetonitrile in the presence of silver tetrafluoroborate to give the corresponding cationic compounds [PdL(L_py-N, C, N)]BF₄ (L = Py (4), MeCN (5)). In contrast, the reaction of [Na₂PdCl₄] with 3,5-bis(3, 5-dimethylpyrazol-1-ylmethyl)toluene (L_pzH) under analogous conditions yields the neutral complex [PdCl₂(L_pzH-N, N)](6) with the ligand bidentate N,N-donor. The cyclometalated palladium complex [PdCl(L_pz-N, C, N)] (7) was prepared by the reaction of Pd(OAc)₂ with L_pzH in acetic acid followed by a metathetic reaction with lithium chloride in acetone/water. Complexes 1, 6, and 7 in the presence of methylaluminoxane (MAO) lead to an active catalyst for the polymerization of ethylene.     

Aggregation behaviour below the gelation threshold for metal-olefin coordination in diene polymers

This study focuses on aggregation below the gelation threshold in ternary solutions containing diene polymers, atactic 1,2-polybutadiene (PBu) or 3,4-polyisoprene (PI), and an inorganic salt, bis(acetonitrile) dichloropalladium(II). Upon mixing, effective coordination crosslinks are formed because the acetonitrile ligands of the palladium salt are displaced by olefinic pendant groups of the polymers. In all cases, the aggregation kinetics correlate with PdCl₂ concentration because the polymer concentration is 100 times greater than the salt concentration. Aggregation is the process that occurs prior to gelation as the transition-metal salt forms a coordination bridge between two different polymer chains. Differential analysis of the initial aggregation rate on the basis of light scattering data at 45° relative to the incident throughput beam reveals that the ‘true’ order of the coordination reaction is close to unity. This suggests that coordination crosslinking is diffusion-controlled in the early stages of aggregation. Half-life analysis of viscous solutions yields an overall reaction order of 1.6 for aggregation of polybutadiene and palladium chloride in tetrahydorfuran (THF). Scaling analysis of the weight-average molecular weight dependence of the root-mean-square size of isolated scattering particles yields an effective exponent of 0.7 for polymer/metal-salt complexes at infinite dilution. This experimental scaling law agrees with literature values for cross-linked polymer networks. In all cases, the size of the aggregates increases at higher PdCl₂ concentration. For polybutadiene/PdCl₂ mixtures in THF or toluene below the gelation threshold, the light-scattering-detected average aggregation number (AN = M_{w, complex}/M_{w, pure polymer} via Zimm-plot intercepts) for low-viscosity solutions is 2, while AN ∼ 9 for viscous THF solutions. In contrast, low aggregation numbers (AN ∼ 2) were calculated for viscous ternary mixtures of 3,4-polyisoprene and PdCl₂ in THF.     

In situ generation of palladium nanoparticles: ligand-free palladium catalyzed ultrafast Suzuki-Miyaura cross-coupling reaction in aqueous phase at room temperature

An ultrafast and highly efficient ligand-free Suzuki-Miyaura cross-coupling reaction between aryl bromides/iodides and arylboronic acids using palladium chloride as catalyst in PEG400/H₂O in air at room temperature has been developed. TEM showed that palladium nanoparticles were generated in situ from PdCl₂/PEG400/H₂O without use of other reductants. The catalyst system can be recycled to reuse three times with good yields.     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Palladium‐catalyzed carbonylation of quaternary ammonium halides to tertiary amides

Catalytic carbonylation of quaternary ammonium salts under anhydrous conditions was investigated using palladium catalyst. The carbonylation of tetramethylammonium iodide was chosen as a model reaction and studied systematically. Ligand‐free PdCl₂ showed efficient catalytic performance for this transformation. A palladium catalyst loading as low as 0.05 mol% was sufficient for high yield (96.9%) of N,N‐dimethylacetamide, corresponding to a turnover frequency of 242 h^?1. Under optimum conditions, several other quaternary ammonium halides were also carbonylated to corresponding tertiary amides in moderate to excellent yields. The catalytic activity of commercial palladium on activated carbon (Pd/C) catalyst was also evaluated. The Pd/C catalyst exhibited high activity for this carbonylation reaction and could be recycled six times with a slight decrease in activity. Furthermore, mechanistic considerations concerning Pd‐catalyzed carbonylation of quaternary ammonium halides were also discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of polyethers with unsymmetrical structures by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane with diacyl chlorides

Polyethers with unsymmetrical structures in the main chains and pendant chloromethyl groups were synthesized by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane (EGMO) with certain diacyl chlorides with quaternary onium salts or pyridine as catalysts. The unsymmetrical polyaddition of EGMO containing two different cyclic ether moieties such as oxirane and oxetane groups with terephthaloyl chloride proceeded smoothly in toluene at 90 °C for 6 h to give polymer 1 with a number‐average molecular weight (M_n) of 51,700 in a 93% yield when tetrabutylammonium bromide (TBAB) was used as a catalyst. The polyaddition also proceeded smoothly under the same conditions when other quaternary onium salts, such as tetrabutylammonium chloride, tetrabutylammonium iodide, tetrabutylphosphonium chloride, and tetrabutylphosphonium bromide, and pyridine were used as catalysts. However, without a catalyst no reaction occurred under the same reaction conditions. Polyadditions of EGMO with isophthaloyl chloride and adipoyl chloride gave polymer 2 (M_n = 28,700) and polymer 3 (M_n = 25,400) in 99 and 65% yields, respectively, under the same conditions. The chemical modification of the resulting polymer, polymer 1 , which contained reactive pendant chloromethyl groups, was also attempted with potassium 3‐phenyl‐2,5‐norbornadiene‐2‐carboxylate with TBAB as a phase‐transfer catalyst, and a polymer with 65 mol % pendant norbornadiene moieties was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 368–375, 2001     

Palladium(II) complexes of (t-butyl salicylidene) diphenyl disulfide diamine: synthesis,structure, spectral characterization and catalytic properties

The hexadentate N₂S₂O₂ donor ligand N,N’-bis(3,5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine was synthesised by the condensation of 2-aminophenyl disulfide and 3,5-di-tert-butyl-2-hydroxybenzaldehyde and its molecular structure was confirmed by X-ray studies. One of the tert-butyl groups in the Schiff base has rotational disorder around the C–C bond with ratio 0.56:0.44. The palladium complexes were prepared by the direct reaction of PdCl₂(CH₃CN)₂ and Schiff base ligands N,N’-bis (5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine and N,N’-bis(3,5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine, respectively. The structure of the metal complexes was characterized by physico-chemical and spectroscopic methods. Palladium is in square-planar geometry bonded to imine nitrogen and phenolic O in both the complexes. The catalytic efficiency of the palladium complexes was evaluated in the cross-coupling reactions; Heck-Mizoroki reaction of iodobenzene and methyl acrylate and the Suzuki-Miyaura reaction of phenylboronic acid and iodobenzene, which gave low to moderate yields. Higher conversions were obtained for 2a as catalyst due to the increase in the number of bulky tertiary butyl groups in the structure.

     

Efficient and selective oxidation of hydrocarbons with tert-butyl hydroperoxide catalyzed by oxidovanadium(IV) unsymmetrical Schiff base complex supported on γ-Fe2O3 magnetic nanoparticles

The catalytic activity of an oxidovanadium(IV) unsymmetrical Schiff base complex supported on γ-Fe₂O₃ magnetic nanoparticles, γ-Fe₂O₃@[VO(salenac-OH)] in which salenac-OH?=?[9-(2′,4′-dihydroxyphenyl)-5,8-diaza-4-methylnona-2,4,8-trienato](-2), was explored in the oxidation of hydrocarbons with tert-butyl hydroperoxide (TBHP, 70% aqueous solution) as oxidant. High catalytic activity and selectivity were demonstrated by this magnetic nanocatalyst in alkane hydroxylation and alkene epoxidation, and the corresponding products were obtained with good to excellent yields in acetonitrile at 50 °C. Reasonable catalytic activity was presented by this supported catalyst in the epoxidation of linear alkenes under optimal reaction conditions. In addition, alkylbenzene derivatives and cycloalkanes can be oxidized to their corresponding alcohols and ketones with good yields in this catalytic system. It is possible to magnetically separate the γ-Fe₂O₃@[VO(salenac-OH)] catalyst and reuse it four times without losing the activity significantly. Moreover, the catalyst structure and morphology do not change after recovery, as indicated by comparing scanning electron microscopy (SEM) image, Fourier transform infrared (FT-IR) and diffuse reflectance spectrum (DRS) of the recovered catalyst with those of the fresh catalyst.

     

FISSION OF AS-AS BONDS IN ELEMENTAL ARSENIC BY ALKALI METALS IN LIQUID AMMONIA. A ROUTE TO MONOALKYL ARSINES

Abstract

Addition of two mol equivalents of t-butyl alcohol to a mixture of powdered arsenic and three mol equivalents of lithium in liquid ammonia gives a suspension of lithium arsenide LiAsH₂. Subsequent addition of a large excess of t-butyl alcohol and n-octyl iodide at very low temperatures affords n-octyl arsine in -65% yield.     

Pd(0)/iodide salt-mediated Heck reaction of aryl nonaflates: Application to the synthesis of 2-(1-alkenyl)phenylphosphonates

Iodide salt, such as NaI, KI or n-Bu₄NI (TBAI), rather than bromide or chloride salt, was found to play a key role in the Pd(0)-catalyzed Heck reaction of aryl nonaflates and terminal alkenes. In the presence of PdCl₂(PPh₃)₂, NaI or TBAI in DMF, a class of 2-(1-alkenyl)phenylphosphonates was first synthesized via the reaction of o-phosphonylphenyl nonaflates with alkenes, the yields, regioselectivities and stereoselectivities were much dependent on the nature of the substituents. In case of the aryl nonaflates without bearing the sterically hindered phosphonyl group with the alkenes, the reactions proceeded more smoothly under the same conditions, leading to the linear products regioselectively in good to excellent yields. A rationale for this reaction is discussed.     

Verbindungen des Germaniums und Zinns. 3. Sterisch überladene Alkylarylstannane durch Übertragung und Isomerisierung von 2,4,6-Tri-tert-butylphenylgruppen

Compounds of Germanium and Tin. 3. Sterically Congested Alkylarylstannanes by Transfer and Isomerization of 2,4,6-Tri-tert-butylphenyl Groups Reaction of SnBr₄ and SnI₄ with 2,4,6-tri-tert-butylphenyllithium (ArLi) by rearrangement of two Ar-groups gives the stannanes ArR₂SnBr ( 3 ) and ArR₂SnI ( 4 ), R = 2-methyl-2(3,5-di-tert-butylphenyl)propyl, which by a further transalkylation reaction with methyl lithium yield ArR₂SnCH₃ ( 5 ). However, treatment of 3 and 4 with tert-butyl lithium exclusively leads to ArR₂SnH ( 6 ) which surprisingly is also obtained by reaction of ArRSnCl₂ with tert-butyl lithium, presumably by an intermolecular R-group transfer. The structures of 5 and 6 were confirmed by X-ray crystallography.     

Control of molecular weight in polymerization of vinyl chloride with Cp*Ti(OPh)3/MAO catalyst

Polymerization of vinyl chloride (VC) with titanium complexes containing Ti‐OPh bond in combination with methylaluminoxane (MAO) catalysts was investigated. Among the titanium complexes examined, Cp*Ti(OPh)₃/MAO catalyst (Cp*; pentamethylcyclopentadienyl, Ph; C₆H₅) gave the highest activity for the polymerization of VC, but the polymerization rate was slow. From the kinetic study on the polymerization of VC with Cp*Ti(OPh)₃/MAO catalyst, the relationship between the M_n of the polymer and the polymer yields gave a straight line, and the line passed through the origin. The M_w/M_n values of the polymer gradually decrease as a function of polymer yields, but the M_w/M_n values were somewhat broad. This may be explained by a slow initiation in the polymerization of VC with Cp*Ti(OPh)₃/MAO catalyst. The results obtained in this study demonstrate that the molecular weight control of the polymers is possible in the polymerization of VC with the Cp*Ti(OPh)₃/MAO catalyst. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3872–3876, 2007     

Room temperature ionic liquid promoted improved and rapid synthesis of 2,4,5-triaryl imidazoles from aryl aldehydes and 1,2-diketones or α-hydroxyketone

An improved and rapid one-pot synthesis of 2,4,5-triaryl imidazoles in a room temperature ionic liquid is described, which does not need any added catalyst. Different ionic liquids based on 1-n-butyl and 1,3-di-n-butyl imidazolium salts were screened and their efficacy in terms of acidity and polarity have been correlated with yields and reaction period. The one-pot methodology resulting in excellent isolated yields in short reaction times is characterized by simple work up procedures and efficient recovery and recycling of the ionic liquid, which acts as a promoter.