Factors affecting the reversed-phase liquid chromatographic separation of polycyclic aromatic hydrocarbon isomers

Reversed-phase liquid chromatography (LC) on C₁₈ stationary phases provides excellent selectivity for the separation of polycyclic aromatic hydrocarbons (PAH). Recent studies have shown that several factors affect selectivity for the LC separation of PAH including phase type (monomeric or polymeric), pore diameter and surface area of the silica substrate, and surface density of the C₁₈ ligands. In this paper the separation of eleven PAH isomers of molecular weight 278 is used to further illustrate the effect of stationary phase characteristics and shape of the solute (length-to-breadth ratio, L/B) on retention and selectivity. Only polymeric C₁₈ phases with a high C₁₈ surface coverage provided separation of all eleven isomers and the elution order of these isomers generally followed increasing L/B values. The effect of solute nonplanarity on reversed-phase LC retention was investigated on both monomeric and polymeric phases using a series of planar and nonplanar PAH pairs. For each solute pair, the nonplanar solute eluted earlier than the planar solute, the largest selectivity factors being observed on the C₁₈ phase with the highest percent carbon load. Based on these studies, a model is proposed to describe the retention of PAH on polymeric C₁₈ phases.     

Modification of Selectivity in Reversed-Phase Liquid Chromatography of Polycyclic Aromatic Hydrocarbons Using Mixed Stationary Phases

Abstract

Monomeric and polymeric C₁₈ materials provide significantly different selectivities for polycyclic aromatic hydrocarbons (PAH) in reversed-phase liquid chromatography. Selectivity factors vary in a regular manner with respect to surface concentration of C₁₈ groups on different C₁₈ columns. In this study, we investigated the feasibility of “customizing” a C₁₈ column to provide an intermediate selectivity by mixing 5-μm polymeric C₁₈ material from two different lots with high and low C₁₈ surface concentrations. Polymeric C₁₈ materials from different production lots were mixed in ratios of 30/70, 50/50, and 70/30 (w/w). Selectivity factors for these columns were found to be similar to those predicted by the linear addition of the selectivities of the two individual phases. The PAH selectivities on these mixed columns were also found to be comparable to data obtained from coupled short columns of appropriate lengths each containing one of these different C₁₈ materials. These studies indicate that columns of specific selectivity can be prepared by either mixing two different C₁₈ materials or by coupling columns containing each of these different phases. The use of mixed phase columns is illustrated for the analysis of a fraction containing five condensed ring PAH isomers (molecular weight 278) isolated from an air particulate sample.     

Determination of column selectivity toward polycyclic aromatic hydrocarbons

An empirical test is described for the evaluation of column selectivity in reversed-phase liquid chromatography. Using a test mixture of three polycyclic aromatic hydrocarbons (PAH), overall column selectivity toward PAH was assessed for over 20 different commercial C₁₈ columns. Retention behavior was correlated to phase type (i.e., monomeric and polymeric surface modification chemistry) for custom synthesized phases. A classification scheme is proposed in which commercial C₁₈ columns are grouped into three classes based on retention behavior: monomeric-like, polymeric-like, and intermediate phase selectivity toward PAH. Correlation of retention behavior of the test mixture with the separation of PAH mixtures and with more general column properties (e.g., phase thickness) is discussed.     

The Application of Perdeuterated Polycyclic Aromatic Hydrocarbons (PAH) as Internal Standards for the Liquid Chromatographic Determination of PAH in a Petroleum Crude Oil and Other Complex Mixtures

Abstract

A sequential liquid chromatographic (LC) procedure for the determination of polycyclic aromatic hydrocarbons (PAH) in a petroleum crude oil and other complex mixtures is described. The procedure includes normal-phase LC on an aminosilane column to isolate fractions containing isomeric PAH and reversed-phase LC on a polymeric C₁₈ column to separate the individual PAH isomers. Appropriate perdeuterated PAH are added to the sample so that each isomeric fraction will contain one internal standard. The perdeuterated PAH are excellent internal standards for this sequential LC procedure. Perdeuterated PAH have normal-phase and reversed-phase LC retention characteristics similar to those of the parent PAH. In the normal-phase LC separation, the perdeuterated PAH elute in the same fraction as the parent PAH. In the reversed-phase LC separation, the perdeuterated PAH elute first and are generally resolved from the parent PAH. The optimized spectrofluorometric detection of each PAH analyte is accomplished by programming appropriate sets of excitation and emission wavelengths to correspond with the elation time of each analyte on the polymeric C₁₈ column. The analytical results obtained from this procedure for the analysis of a shale oil sample [Standard Reference Material (SRM) 1580] and a petroleum crude oil (SRM 1582) are compared to values obtained by gas chromatography - mass spectrometry.     

Analysis of Polychlorinated Biphenyl Residues in Waste Oils by High-Performance Liquid Chromatography

Abstract

The qualitative analysis of polychlorinated biphenyl residues (PCBs) in waste mineral oils can be rapidly and accurately carried out by high-performance reverse phase liquid chromatography (HPLC) using a 25 cm HC-ODS Sil-X (Perkin-Elmer) column and a gradient elution system consisting of water-acetonitrile where the latter increases with linear program from 50 to 77% over 9 minutes.     

Universal Calibration Method for the Determination of Polycyclic Aromatic Hydrocarbons by High Performance Liquid Chromatography with Broadband Diode-Array Detection

Abstract

The response of polycyclic aromatic hydrocarbons (PAH) at different UV wavelengths was measured using high performance liquid chromatography with spectrophotometric diode-array detection. By utilizing the total UV absorption bandwidth (200-400 nm), it was found that a narrow distribution of normalized response factors (area/g) could be obtained for 16 PAH in a reference mixture of frequently-occurring species, even though the PAH represented a wide variety of different chromophores.

Using the mean response factor for the 16 PAH, a universal calibration factor was obtained that formed the basis of a method for the determination of PAH for which calibration data cannot otherwise be obtained. It utilized normal phase high performance liquid chromatography (HPLC) with a cyanopropyl column and a hexane-dichloromethane mobile phase. The HPLC conditions were optimized for the separation of PAH according to their aromatic ring number. The method was developed for the characterization of complex mixtures of fossil fuels-derived PAH that cannot be analyzed by traditional methods. It is applicable to PAH having from 1 to 10 or more fused aromatic rings.     

Cross‐linked Multilayer Polymer‐Clay Nanocomposites and Permeability Properties

Abstract

Electrostatically layered aluminosilicate nanocomposites have been prepared by the sequential deposition of poly(allylamine hydrochloride)/poly(acrylic acid)/poly(allylamine hydrochloride)/saponite (PAH/PAA/PAH/saponite)₁₀ on poly(ethylene terephtalate) (PET) film. Exfoliated saponite nanoplatelets were obtained by extensive shaking, sonication, and centrifugation of a water suspension. To minimize permeability and improve the mechanical integrity, cross‐linking of composite films was carried out at different temperatures. The formation of amide linkage induced through heating was observed by Fourier Transform Infrared (FT‐IR) and x‐ray photoelectron spectroscopy (XPS). The cross‐linking of nanocomposites (PAH/PAA/PAH/saponite)₁₀ showed 60% decrease in permeability of oxygen when compared with the pristine PET substrate film. In contrast, water permeability of the nanocomposite membrane was not affected by heating temperature and deposition cycles.     

Anthracene-based hetero bisamide chemosensor in fluorescence sensing of monocarboxylates over monocarboxylic acids

A fluorescent chemosensor 1 with different amide moieties as recognition elements has been designed and synthesised. The recognition behaviour of the chemosensor towards various monocarboxylates and their conjugate acids has been evaluated. Although the sensor 1 shows significant quenching of emission of anthracene in CH₃CN, it shows an increase in emission in CHCl₃ containing 2% CH₃CN upon complexation of aliphatic monocarboxylates. Receptor 1 shows selectivity for acetate, propanoate and dihydrogen phosphate over the other anions studied under different conditions. The binding features have been established by ¹H NMR, UV–vis and fluorescence spectroscopic methods.     

Transport properties of polyphenylquinoxalines

The correlation between chemical structure and gas transport properties is considered for a new class of membrane materials based on structurally similar polyphenylquinoxalines that are characterized by different numbers of flexible-O-ether bonds in the repeating unit and different chain rigidities. Permeability, diffusion, and solubility coefficients have been estimated for the gases H₂, He, O₂, N₂, CO, CO₂, and CH₄; separation factors for various gas pairs have been determined. For the materials with a similar level of cohesive energy density, which characterizes interchain interactions, permeability decreases with a decrease in chain rigidity, whereas selectivity of gas separation increases.     

A Study On Air Pollution by Asphalt Fumes

Abstract

A TLC/HPLC procedure for the determination of polycyclic aromatic hydrocarbons (PAH), occuring in asphalt fumes (adsorbed on particular matter), is described. The method is based on extraction of asphalt fume particles, collected on glass fibre filters, using CCK₄. Following a clean up step by the aid of a TLC procedure on Al₂ O₃ thinlayer plates, using a mixture of cyclohexane/acetone/ether as the mobile phase. Under UV-light, occuring PAH are indicated as fluorescent spots. A separation of the collected PAH into individual components and their identification is performed by the aid of a HPLC procedure. Futher-more, an approach was made to verify the separated PAH by their fluorescence spectra and their mass spectra.     

Separation of polycyclic aromatic hydrocarbons with a C60 bonded silica phase in microcolumn liquid chromatography

A chemically bonded C₆₀ silica phase was synthesized as a stationary phase for liquid chromatography (LC) and its retention behavior evaluated for various polycyclic aromatic hydrocarbons (PAHs) using microcolumn LC. The results indicate that the C₆₀ bonded phase offers selectivity different from that of octadecylsilica (ODS) bonded phases in the separation of isomeric PAHs. With the C₆₀ phase, PAH molecules having a partial structure similar to that of the C₆₀ molecule, e.g. triphenylene and perylene, were retained longer than with ordinary ODS stationary phases. The results also show that good correlation exists between the retention data with this C₆₀ bonded phase and with C₆₀ itself as the stationary phase.     

Electrochemical Properties of a Boron‐Doped Diamond Electrode Modified with Gold/Polyelectrolyte Hollow Spheres

Oppositely charged polyelectrolyte (poly(allyamine hydrochloride) (PAH) and poly(sodium 4‐styrene‐sulfonate) (PSS)), and negatively charged gold nanoparticles (Au) were assembled alternately on polystyrene (PS) spheres via layer‐by‐layer technique, and the different PAH/(PSS/PAH)_n/(Au/PAH)_m/Au composite hollow spheres were derived by dissolving PS core. These hollow spheres were used to modify boron‐doped diamond (BDD) electrodes for electrochemical sensors. The cyclic voltammetric results for dopamine (DA) detection demonstrated that hollow‐sphere‐modified BDD exhibited better electrocatalytic activity than did bare BDD. Influence of the wall thickness and composition of hollow spheres on electrochemical properties were investigated. The results showed that the oxidative peak potential of DA and the peak current varied with different PSS/PAH and Au/PAH layers. The optimized wall structure of hollows spheres was PAH/(PSS/PAH)₇/(Au/PAH)₅/Au.     

A highly selective ratiometric fluorescent probe for H2S based on new heterocyclic ring formation and detection in live cells

A 3-indolylacrylate derivative, 3-IA, prepared by connecting an ethyl acrylate in 3-position of indole has been synthesised and characterised. Ethyl acrylate moiety acts as the Michael acceptor towards H₂S, and the resultant addition product then participates in intramolecular cyclisation with the ester group at 2-position to form another new heterocyclic ring. Blue fluorescence of 3-IA turned into green in presence of H₂S, leading to ratiometric behaviour of the fluorescent sensor with large stokes shift of 55 nm. Probe 3-IA has excellent selectivity towards H₂S over other biothiols and other competing anions. Density function theory/time-dependent density function theory calculations were carried out to validate the reaction mechanism and the electronic properties of 3-IA. Importantly, the ratiometric probe 3-IA shows great promise in H₂S detection by simple visual fluorescent inspection in filter paper-based protocol. The probe shows its excellent ability to detect H₂S in different natural water samples. Furthermore, we have employed our probe to detect H₂S for ratiometric imaging in live Vero cell.     

Detectors for Liquid Chromatographic Analysis for Polynuclear Aromatic Hydrocarbons

Abstract

A number of liquid chromatographic detectors of various types have been evaluated for both selectivity and sensitivity for the detection of polynuclear aromatic hydrocarbons (PAH). Detection limits for fixed and variable wavelength UV photometers, filter fluorimeters, and spectrofluorimeters have been determined. The utility of each of these types of detectors for use in the reversed-phase HPLC analysis of environmental extracts containing trace levels of PAH's is discussed.     

Preparation and characterisation of polyaniline based membranes for gas separation

Transport rates (permeability) and ideal separation factors for several gas pairs through dense polyaniline membranes are reported. The ideal separation factors for all gas pairs tested were found to be independent of the polyaniline membrane thickness whereas the permeability of the single gases showed significant variations. Both dedoped and redoped films (film thickness between 9 and 67 μm) were studied. The highest selectivities α_(A/B) found were 7.6 for the gas pair H₂/CO₂ in the case of the dedoped membrane and 10 for the gas pair H₂/CO₂, 6 for O₂/N₂ and 200 for H₂/N₂ in the case of the redoped membrane. Statistical analysis of a large number of membranes allowed the critical comparison with results obtained by other groups.Comparison with other membrane materials shows that an approximately sixfold enhancement of the respective separation factors is possible for gas pairs containing hydrogen. Similar separation factors are observed for the gas pairs CO₂/O₂, CO₂/N₂ and N₂/O₂.Membranes for which Knudsen diffusion was observed exhibited regularly distributed micropores (400 nm diameter).     

Correlation between Performances of Hollow Fibers and Flat Membranes for Gas Separation

This work presents an attempt at correlating the available permeability/selectivity literature data for hollow fibers and flat membranes. Therefore, this paper gathers the information pertaining to membrane materials for which membrane properties of flat membranes and hollow fibers have both been reported. An overview of the relations between selectivity and permeance of hollow fiber membranes for various gas pairs (O₂/N₂, CO₂/CH₄, CO₂/N₂, H₂/N₂, H₂/CO₂, H₂/CH₄ and He/N₂) is presented first. The upper bound lines are the ones proposed by Robeson, which were calculated by assuming a one-micron-thick skin layer as proposed by Robeson in 2008. From the results obtained, a relation between the selectivity ratio in both kinds of membranes (α_H/α_f) and skin layer thickness (l) calculated from flat membranes and hollow fibers gas permeation data for these pairs of gases is also presented. The skin layer thicknesses measured using seven different experimental techniques for six commercial membranes are compared. The influences of spinning parameters on the morphology and performance of hollow fiber membrane gas separation are discussed. Finally, an analysis is made of the reasons why the dense skin layer thicknesses of a hollow fiber calculated using permeance and permeability data vary for different gases and also differ from direct experimental measurements.     

Development and characterization of homogeneous membranes de from high molecular weight sulfonated polyphenylene oxide

The high molecular weight polyphenylene oxide (PPO) was sulfonated to different ion exchange capacity (IEC) values using chlorosulfonic acid. The physico-chemical properties along with the gas transport properties of the membranes prepared from sulfonated PPO (SPPO) were evaluated. Sulfonation of PPO results in a linear increase of density with the IEC value while the average d-spacing in polymer remains constant. Sulfonic groups attached to the aromatic ring in the PPO backbone are not thermally stable. On the other hand, when tested with CO₂ at room temperature, the SPPO membranes maintained a constant permeability over the period of 60 days. An increase in IEC value of SPPO results in an increase in O₂/N₂ and CO₂/CH₄ ideal selectivities and a decrease in O₂ and CO₂ permeabilities. The combination of permeability and ideal selectivity for both gas pairs places the SPPO membranes below the respective upper-bound lines for polymeric membranes. However, an increase in the IEC value brings the permeability versus ideal selectivity relationship closer to the upper-bound line, especially for the O₂/N₂ gas pair.     

Preparation and Characterization of Amine Modified Porous Polymer for Rplc

Abstract

The retention behaviour and selectivity of various aromatic compounds, including halobenzenes and a IkyIbenzenes, were examined on the stationary phase of chloromethylated polystyrene(CMS) beads, of which the chloride group was substituted by the alkylamines: n-hexyl(C₆), n-octyl(C₈), n-decyl (C₁₀),n-dodecyl (C₁₂), n-tetradecyl (C₁₄) or n-hexadecy1 (C₁₆). Changes in the distribution coefficients of benzene derivatives are demonstrated not only by the changes of the eluent compositions but also by the changes of chain length in the stationary phase. In general, a longer alkyl chain in the stationary phase gives longer retention time and different selectivity. The effects of MeOH/H₂O ratios on retention and selectivity was also demonstrated on the C₁₄ stationary phase. Good separations of halobenzenes and alkyIbenzenes were obtained with C₁₄ stationary phase. Moreover, the retention time for samples was shortened by about a half compared to polystyrene stationary phase. These results show the chemical modification of CMS gel with long chain alkyl amines decreases tailing and provides new supports with different selectivities.     

Analysis of Polycyclic Aromatics

Abstract

Polycyclic aromatic hydrocarbons (PAH), among them carcinogenic compounds, have been found to be widely distributed in the human environment. The formation of PAH in processes relevant to environmental pollution will be described (pyrolysis or incomplete combustion of aliphatic and aromatic material, formation in higher plants). The application of the following methods to the analysis of PAH mixtures will be discussed: gas chromatography (capillary columns, use. of liquid crystals and inorganic salts such as LiCl or Cacl₂, as stationary phases in packed columns, selective detectors); luminescence spectroscopy (use of phosphorescence in paper and thin-layer chromatography, Shpol'skii spectra, quenchofluorimetry; mass spectroscopy.     

Hydrophobic Interaction Chromatography in the Detection of Hemoglobinopathies

Abstract

We describe a rapid method of high-performance liquid chromatography that utilizes the principle of hydrophobic interaction to separate the mutant globin ß chains found in certain hemoglobinopathies. We used this method to analyse blood globin chains in patients with all the known diagnostized hemoglobinopathies found in Finland, that is Hb_Helsinki' Hb_Linköping' Hb_Vaasa' Hb_Hiiiyama and Hb_Syracuse. As reference we also analyzed normal adult and fetal blood hemoglobins. Our method allowed good separation of the mutant ß globin chains from intact chains in the heterozygous patients as well as from α globin chain and fetal γ globin chains. We used two different systems of liquid chromatographic columns for the analyses, each column giving a slightly different elution selectivity and complementing the other. The analyses we describe are rapid and automated and allow hemoglobinopathies to be diagnosed precisely and, owing to the different principles of separation, complement other methods in common use.