Synthesis of the first nanomagnetic particles with semicarbazide‐based acidic ionic liquid tag: an efficient catalyst for the synthesis of 3,3′‐(arylmethylene)bis(4‐hydroxycoumarin) and 1‐carbamato‐alkyl‐2‐naphthol derivatives under mild and green conditions

Semicarbazide functionalized with chlorosulfonic acid on the surface of silica‐coated magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃Semicarbazide‐SO₃H/HCl}, as a novel magnetic Brønsted acid catalyst according to the aims of green chemistry was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning electron, transmission electron and atomic force microscopies and thermogravimetric analysis. The capability and excellent activity of this nanoparticle catalyst were exhibited in the synthesis of two series of compounds with important biological activities, namely 3,3′‐(arylmethylene)bis(4‐hydroxycoumarin) and 1‐carbamato‐alkyl‐2‐naphthol derivatives, under mild, green and solvent‐free conditions. To the best of our knowledge, this is the first study of the synthesis and application of {Fe₃O₄@SiO₂@(CH₂)₃Semicarbazide‐SO₃H/HCl} as Brønsted acid solid magnetic nanoparticles. Consequently the present study can open up a novel and promising intuition in the sequence of logical design, synthesis and applications of task‐specific Brønsted acid magnetic nanoparticle catalyst with favourable properties as a full‐fledged efficient material for sustainable approaches. Copyright © 2016 John Wiley & Sons, Ltd.     

Efficient conversion of fructose to 5‐hydroxymethylfurfural by functionalized γ‐Al2O3 beads

Millimeter size γ‐Al₂O₃ beads were prepared by alginate assisted sol–gel method and grafting organic groups with propyl sulfonic acid and alkyl groups as functionalized γ‐Al₂O₃ bead catalysts for fructose dehydration to 5‐hydroxymethylfurfural (5‐HMF). Experiment results showed that the porous structure of γ‐Al₂O₃ beads was favorable to the loading and dispersion of active components, and had an obvious effect on the properties of the catalyst. The lower calcination temperature of γ‐Al₂O₃ beads increased the specific surface area, the hydrophobicity and the activity of catalysts. Competition between the reaction of alkyl groups and ‐SH groups with surface hydroxyl during the preparation process of the catalyst influenced greatly the acid site densities, hydrophobic properties and activity of the catalyst. With an increase in the alkyl group chain, the hydrophobicity of catalysts increased obviously and the activity of the catalyst was enhanced. The most hydrophobic catalyst C₁₆‐SO₃H‐γ‐Al₂O₃–650°C exhibited the highest yield of 5‐HMF (84%) under the following reaction conditions: reaction medium of dimethylsulfoxide/H₂O (V/V, 4:1), catalyst amount of 30 mg, temperature of 110°C and reaction time of 4 hr.     

Supported dual‐acidic 1,3‐disulfoimidazolium chlorozincate@HZSM‐5 as a promising heterogeneous catalyst for synthesis of indole derivatives

HZSM‐5‐supported Brönsted and Lewis acidic ionic solid 1,3‐disulfoimidazolium chlorozincate materials ([dsim]₂[ZnCl₄]@HZSM‐5) were synthesized with various ratios (3, 6, 9, 17 and 50% w/w). The heterogeneous materials were characterized via a variety of spectroscopic techniques. Dual acidity of these materials was determined using specified techniques. These acidic solids were examined as stable heterogeneous catalysts for the Fischer indole reaction of equimolar amounts of phenylhydrazine hydrochloride and various aliphatic or aromatic ketones at 80–90°C in neat condition to produce substituted indole derivatives. The efficient 17% ionic salt‐loaded HZSM‐5 composite was easily reused for ten consecutive cycles with a slight loss of its activity. The recycled catalyst was further analysed using powder X‐ray diffraction and inductively coupled plasma optical emission spectrometric techniques.     

Brønsted acid‐catalyzed polymerization of ε‐caprolactone in water: A mild and straightforward route to poly(ε‐caprolactone)‐graft‐water‐soluble polysaccharides

The polymerization of ε‐caprolactone (ε‐CL) has been assessed in water using various Brønsted acids as catalysts. The reaction was found to be quantitative at 100 °C, leading to number–average molecular weights up to 5000 g mol^?1. The Brønsted acid‐catalyzed polymerization of ε‐CL in water was further conducted in the presence of water‐soluble polysaccharides thereby affording graft copolymers. The approach enables an easy, mild access to dextran hydroxyesters. For low degree of substitution, the latter self‐assembles in water to form nanoparticles. Poly(ε‐CL)‐graft‐methylcellulose copolymers can also be obtained via a similar approach. It is noteworthy that the methodology reported herein is a one‐step route to poly(ε‐CL)‐graft‐water‐soluble polysaccharides, operating in mild conditions, that is, at low temperatures, using readily available metal‐free catalysts and water as a solvent. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2139–2145     

Kinetic Studies on Nucleophilic Addition Reactions of 4‐X‐substituted Anilines to N1‐methyl‐4‐nitro‐2,1,3 benzothiadiazolium terafluoroborate in Acetonitrile: Reaction Mechanism and Mayr's Approach

The kinetics of the coupling of N1‐methyl‐4‐nitro‐2,1,3 benzothiadiazolium tetrafluoroborate 1 with a series of 4‐X‐substituted anilines 2a–f (X = OH, OMe, Me, H, Cl, and CN) have been investigated in acetonitrile at 20°C. The second‐order rate constants result in a nonlinear Brönsted‐type plot. The Hammett plot is also nonlinear, whereas the Yukawa–Tsuno plot exhibits an excellent linear correlation with ρ = –1.62 and r = 1.44. The large Brönsted (β_nuc = 1.24) and Hammett (ρ = –5.16) values suggest that the reactions proceed trough a single electron transfer mechanism. The finding of satisfactory correlation between the log k₁ of the reactions and the oxidation potentials (E°) of anilines 2a–d supports this mechanism. On the other hand, electrophilicity parameter E of benzothiadiazolium cation 1 as defined by the correlation log k_20°C = s(E + N) has been determined and compared with the electrophilic reactivities of a large variety of electrophiles.     

Hydrolytic degradation of poly(ε‐caprolactone) with different end groups and poly(ε‐caprolactone‐co‐γ‐butyrolactone): characterization and kinetics of hydrocortisone delivery

Asymmetric telechelic α‐hydroxyl‐ω‐(carboxylic acid)‐poly(ε‐caprolactone) (HA‐PCL), α‐hydroxyl‐ω‐(benzylic ester)‐poly(ε‐caprolactone) (HBz‐PCL), and an asymmetric telechelic copolymer α‐hydroxyl‐ω‐(carboxylic acid)‐poly(ε‐caprolactone‐co‐γ‐butyrolactone) (HA‐PCB) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL). CL and CL/γ‐butyrolactone mixture were used to obtain homopolymers and copolymer respectively at 150°C and 2 hr using ammonium decamolybdate (NH₄) [Mo₁₀O₃₄] (Dec) as a catalyst. Water (HA‐PCL and HA‐PCB) or benzyl alcohol (HBz‐PCL) were used as initiators. The three polylactones reached initial molecular weights between 2000 and 3000 Da measured by proton nuclear magnetic resonance (¹H‐NMR). Compression‐molded polylactone caplets were allowed to degrade in 0.5 M aqueous p‐toluenesulfonic acid at 37°C and monitored up to 60 days for weight loss behavior. Data showed that the copolymer degraded faster than the PCL homopolymers, and that there was no difference in the weight loss behavior between HA‐PCL and HBz‐PCL. Caplets of the three polylactones containing 1% (w/w) hydrocortisone were placed in two different buffer systems, pH 5.0 with citrate buffer and pH 7.4 with phosphate buffer at 37°C, and monitored up to 50 days for their release behavior. The release profiles of hydrocortisone presented two stages. The introduction of a second monomer in the polymer chain significantly increased the release rate, the degradation rate for HA‐PCB being faster than those for HBz‐PCL and HA‐PCL. At the pH studied, only slight differences on the liberation profiles were observed. SEM micrographs indicate that hydrolytic degradation occurred mainly by a surface erosion mechanism. Copyright © 2009 John Wiley & Sons, Ltd.     

The synthesis of metal–organic framework Al‐MIL‐53‐derived Brønsted acid catalyst and its application in the Mannich reaction

A metal–organic framework Al‐MIL‐53‐NH₂‐derived Brønsted acid catalyst (Al‐MIL‐53‐RSO₃H) has been synthesized employing a post‐synthetic modification strategy under mild conditions. The Al‐MIL‐53‐RSO₃H catalyst was successfully utilized in the nitro‐Mannich reaction taking advantage of its strong Brønsted acidity. Good to excellent yields of Mannich adducts were achieved for a variety of acylimine substrates in the presence of 0.1 mol% Al‐MIL‐53‐RSO₃H. Furthermore, the Al‐MIL‐53‐RSO₃H catalyst can be recycled five times without decreasing the yield and selectivity of Mannich adducts.     

A Highly Efficient Friedel–Crafts Reaction of 3‐Hydroxyoxindoles and Aromatic Compounds to 3,3‐Diaryl and 3‐Alkyl‐3‐aryloxindoles Catalyzed by Hg(ClO4)2⋅3 H2O

We report a highly efficient Friedel–Crafts reaction of 3‐alkyl or 3‐aryl 3‐hydroxyoxindoles with a variety of aromatic and heteroaromatic compounds to unsymmetrical 3,3‐diaryloxindoles or 3‐alkyl‐3‐aryloxindoles, which are interesting medicinal targets and useful building blocks for the synthesis of natural products. Hg(ClO₄)₂ ? 3 H₂O was identified as a powerful catalyst for this reaction, and is significantly more efficient than other screened metal perchlorate hydrates and Brønsted acids such as HOTf and HClO₄. The high catalytic property of Hg(ClO₄)₂ ? 3 H₂O originates from the unprecedented dual activation effects of aromatic mercuration, which could generate a strong protic acid to facilitate the generation of a carbocation at the C3‐position of oxindoles and simultaneously form the more reactive nucleophilic reaction partner.     

Synergic Effect of Active Sites in Zinc‐Modified ZSM‐5 Zeolites as Revealed by High‐Field Solid‐State NMR Spectroscopy

Understanding the nature of active sites in metal‐supported catalysts is of great importance towards establishing their structure–property relationships. The outstanding catalytic performance of metal‐supported catalysts is frequently ascribed to the synergic effect of different active sites, which is however not well spectroscopically characterized. Herein, we report the direct detection of surface Zn species and ¹H–⁶⁷Zn internuclear interaction between Zn²⁺ ions and Brønsted acid sites on Zn‐modified ZSM‐5 zeolites by high‐field solid‐state NMR spectroscopy. The observed promotion of C?H bond activation of methane is rationalized by the enhanced Brønsted acidity generated by synergic effects arising from the spatial proximity/interaction between Zn²⁺ ions and Brønsted acidic protons. The concentration of synergic active sites is determined by ¹H–⁶⁷Zn double‐resonance solid‐state NMR spectroscopy.     

Ring‐opening polymerization of ϵ‐caprolactam and ϵ‐caprolactone via microwave irradiation

A novel process for synthesizing nylon‐6 and poly(?‐caprolactone) by microwave irradiation of the respective monomers, ?‐caprolactam and ?‐caprolactone, is described. The ring opening of ?‐caprolactam to produce nylon‐6 was performed in a microwave oven by the forward power being controlled to about 90–135 W in the presence of an ω‐aminocaproic acid catalyst (10 mol %) and for periods of 1–3 h at temperatures varying from 250 to 280 °C. The ring opening of ?‐caprolactone to produce poly(?‐caprolactone) was performed in a microwave oven by the forward power being controlled to about 70–100 W for a period of 2 h in the presence of stannous octoate with and without 1,4‐butanediol over a temperature range of 150–200 °C. The yields, conditions of the reactions, and properties of the products generated relative to the thermal processes are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2264–2275, 2002     

Three‐component solventless Strecker synthesis of α‐aminonitriles catalysed by a renewable sulfonated nanoporous carbon catalyst (CMK‐5‐SO3H)

The one‐pot three‐component synthesis of a variety of α‐aminonitriles has been studied using a catalytic amount of a sulfonic acid‐functionalized ordered nanoporous carbon catalyst, CMK‐5‐SO₃H, at room temperature under solvent‐free reaction conditions. The heterogeneous catalyst could be readily isolated from the reaction mixture and reused at least ten times without significant loss in activity. A clean, rapid and simple method for the preparation of α‐aminonitriles using the recoverable CMK‐5‐SO3H catalyst is described.     

Synthesis,characterization, and degradation of poly(ethylene‐b‐ε‐caprolactone) diblock copolymer

Poly(ethylene‐b‐ε‐caprolactone) (PE‐b‐PCL) diblock copolymers were synthesized by ring‐opening polymerization (ROP) of ε‐caprolactone (CL) with α‐hydroxyl‐ω‐methyl polyethylene (PE‐OH) as a macroinitiator and ammonium decamolybdate (NH₄)₈[Mo₁₀O₃₄] as a catalyst. Polymerization was conducted in bulk (130–150°C) with high yield (87–97%). Block copolymers with different compositions were obtained and characterized by ¹H and ¹³C NMR, MALDI‐TOF, SAXS, and DSC. End‐group analysis by NMR and MALDI‐TOF indicates the formation of α‐hydroxyl‐ω‐methyl PE‐b‐PCL. The PE‐b‐PCL degradation was studied using thermogravimetric analysis (TGA) and alkaline hydrolysis. The PCL block was hydrolyzed by NaOH (4M), without any effect on the PE segment. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(3,3 bis(azidomethyl)oxetane‐co‐ε‐caprolactone)s

The quasi‐living cationic copolymerization of 3,3‐bis(chloromethyl)oxetane (BCMO) and ε‐caprolactone (ε‐CL), using boron trifluoride etherate as catalyst and 1,4‐butanediol as coinitiator, was investigated in methylene chloride at 0°C. The resulting hydroxyl‐ended copolymers exhibit a narrow molecular weight polydispersity and a functionality of about 2. The reactivity ratios of BCMO (0.26) and ε‐CL (0.47), and the T_g of the copolymers, indicate their statistical character. The synthesis of poly(3,3‐bis(azidomethyl)oxetane‐co‐ε‐caprolactone) from poly(BCMO‐co‐ε‐CL) via the substitution of the chlorine atoms by azide groups, using sodium azide in DMSO at 110°C, occurs without any degradation, but the copolymers decompose at about 240°C. All polymers were characterized by vapor pressure osmometry or steric exclusion chromatography, ¹H‐NMR and FTIR spectroscopies, and DSC. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1027–1039, 1999     

High Catalytic Performance of Mesoporous Dual Brønsted Acidic Ternary Poly (Ionic Liquids) for Friedel‐Crafts Alkylation

A newfangled cross‐linked dual Brønsted acidic ternary mesoporous poly (ionic liquids)(MPILs) with mesoporous structure was successfully synthesized with divinylbenzene as cross linker, 1‐vinyl‐3‐butyl imidazole bromide and sodium p‐styrene sulfonate as functional group through an ordinary post‐modification method and anion exchange process. A sponge‐like mesoporous tunnel structure was observed and the obtained P (BVS‐SO₃H)‐SO₃CF₃ sample appeared a relatively high thermal stability, a large surface area (up to 286.8 m²/g) and great pore volume (0.73 cm³/g). The abundant dual acidic group of sulfonic acid and trifluoromethanesulfonic acid of the composite in the polymer framework impart Brønsted acidity. For the sake of demonstrating our claims, the sample has been used as a novel solid acid catalyst for the reaction of alkylation of o‐xylene with styrene to 1‐diphenylethane (PXE). Under optimal reaction conditions (reaction under 120 °C for 3 hr, catalyst amount was 0.5 wt% of the reaction system, and the mass ratio of o‐xylene/styrene was 7.5:1, a 100% conversion of styrene and 93.7% PXE yield was acquired. After four times recycle, the yield remains 53.3%. Comparing with the commercial liquid acid catalyst, it processing a higher catalytic property and recyclability. Moreover, this fresh dual acidic heterogeneous catalyst owning a promising future applied in other acidic catalytic reactions and provide a new method to modify catalyst.     

Vapor‐Phase Reaction of Citronellal over Mesoporous Molecular Sieves MCM‐41 and Zeolites

The vapor‐phase reaction of citronellal (CTN) at 220 °C and atmospheric pressure has been studied using mesoporous molecular sieves and zeolites in a fixed‐bed reactor. The primary products included isopulegol (IPG), menthone, and pulegol with subsequent reactions to form cyclic hydrocarbons. The CTN conversion and the product selectivity depend on the acidity and the textural property of catalysts. Lewis and/or Brönsted acid sites are essential for catalyzing this reaction. An increase of SiO₂/Al₂O₃ mol ratio diminishes the acid amount of all catalysts and enhances both the surface area and the structural order of MCM‐41. The catalytic activity follows the order of MCM‐41 > HZSM‐5 > Hβ > USY, in accordance with the relative total acid amount except that of MCM‐41. Despite its low acidity, Si‐MCM‐41 exhibits the best catalytic performance due to its uniform mesopores, large surface area and good stability; the CTN conversion and the IPG yield attain 91.9% and 58.6%, respectively, after at least 25 h time‐on‐stream.     

Eco‐friendly synthesis of 1,8‐dioxo‐octahydroxanthenes catalyzed by ionic liquid in aqueous media

A biodegradable functionalized ionic liquid 3‐(N,N‐dimethyldodecylammonium)propanesulfonic acid hydrogen sulfate ([DDPA][HSO₄]) was prepared and used as a Brønsted acid–surfactant‐combined catalyst for the eco‐friendly one‐pot synthesis of 1,8‐dioxo‐octahydroxanthenes at 100°C in water. Under these conditions, the reaction of various aromatic aldehydes with dimedone generated 1,8‐dioxo‐octahydroxanthenes in good yields with a simple postreaction procedure. The products could simply be separated from the catalyst/water system, and the catalyst could be reused at least six times without noticeably decreasing the catalytic activity. J. Heterocyclic Chem., (2011).     

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO₃H₂ by post‐synthesis modification. Characterization reveals that UiO‐66‐PO₃H₂ retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Synthesis and Characterization of β‐Diketiminate Aluminum Compounds and Their Use in the Ring‐Opening Polymerization of ε‐Caprolactone

Four aluminum alkyl compounds, [CH{(CH₃)CN‐2,4,6‐MeC₆H₂}₂AlMe₂] ( 1 ), [CH{(CH₃)CN‐2,4,6‐MeC₆H₂}₂AlEt₂] ( 2 ), [CH{(CH₃)CN‐2‐iPrC₆H₄}₂AlMe₂] ( 3 ), and [CH{(CH₃)CN‐2‐iPrC₆H₄}₂AlEt₂] ( 4 ), bearing β‐diketiminate ligands [CH{(Me)CN‐2,4,6‐MeC₆H₂}]₂ (L¹H) and [CH{(Me)CN‐2‐ⁱPrC₆H₄}]₂ (L²H) were obtained from the reactions of trimethylaluminum, triethylaluminum with the corresponding β‐diketiminate, respectively. All compounds were characterized by ¹H NMR and ¹³C NMR spectroscopy, single‐crystal X‐ray structural analysis, and elemental analysis. Compounds 1 – 4 were found to catalyze the ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) with good activity.     

Effect of weak base modification on ZSM‐5 catalyst for methanol to aromatics

The effect of weak base modification on the catalytic performance of ZSM‐5 catalyst for conversion of methanol to aromatics was investigated. The catalysts were characterized using X‐ray diffraction, X‐ray fluorescence, N₂ adsorption–desorption, NH₃ temperature‐programmed desorption, Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetry. The results showed that catalysts treated with weak base (NaHCO₃, Na₂CO₃ and NH₃⋅H₂O) exhibited a pore structure with interconnected micropores and mesopores. The existence of mesopores was beneficial for improving the diffusion of reactants and products, and the coke deposition resistance capacity of treated catalysts was enhanced greatly. Meanwhile, compared to traditional ZSM‐5 zeolite, the ratio of Brønsted to Lewis (B/L) acid sites of ZSM‐5/NH₃⋅H₂O (B/L = 7.35) zeolite slightly increased but the amount of acid sites reduced, while those of ZSM‐5/NaHCO₃ (B/L = 0.127) and ZSM‐5/Na₂CO₃ (B/L = 0.107) significantly reduced. Further, the catalyst treated with NH₃⋅H₂O solution was evaluated in the methanol to aromatics reaction and led to an enhanced aromatization reaction rate. The liquid hydrocarbons product distribution exhibited higher aromatic hydrocarbons yield (56.12%) and selectivity (40.28%) of benzene, toluene and xylene (BTX) with isoparaffin content reducing to 26.17%, which could be explained by appropriate B/L acid sites ratio, higher pore volumes and higher surface area.     

The ambident electrophilic behavior of 5‐nitro‐3‐X‐thiophenes in σ‐complexation processes

Kinetics of the reactions of 3,5‐dinitrothiophene 1 and 3‐cyano‐5‐nitrothiophene 2 with a series of parasubstituted phenoxide anions 3a–c have been investigated in aqueous solution at 20°C. Two unsubstituted electrophilic centers (C(2) and C(4)) of the two thiophenes have been identified. The Fukui functions correctly predict the C(2) and C(4) atoms as the most electrophilic centers of these electron‐deficient thiophenes 1 and 2 . Analysis of the experimental data in terms of Brønsted relationships reveals that the reaction mechanism likely involves a single‐electron transfer (SET) process. The excellent correlations upon plotting the rate constants versus the oxidation potentials E^o values is an additional evidence that reactions between thiophenes and phenoxide anions are proceeding through an initial electron transfer. It is of particular interest to note that the systems studied in this paper provide a rare example of a SET mechanism in σ‐complexation reactions. According to the free energy relationship log k = s(N + E) (Angew. Chem., Int. Ed. Engl., 1994, 33, 938–957), the electrophilicity parameters E of the C‐4 and C‐2 positions of the thiophenes have been determined and compared with the reactivities of other ambident electrophiles. On the other hand, the second‐order rate constants for the reactions of these thiophenes with the hydroxide ion has been measured in water and 50% water–50% acetonitrile and found to agree with those calculated theoretically using Mayr's equation from the E values determined in this work and from the previously published N and s parameters of OH⁻.