A Cheap and Efficient Methodology for the Solvent‐Free,One‐pot and Multi‐component Synthesis of 3,4‐Dihydropyrimidin‐2(1H)‐ones Catalyzed by Mesoporous NH4H2PO4/MCM‐48 and Comparison of Its Catalytic Efficacy with NH4H2PO4/MCM‐41

The catalytic efficiency of ammonium dihydrogenphosphate was evaluated in the two heterogeneous forms of NH₄H₂PO₄/MCM‐48 and NH₄H₂PO₄/MCM‐41, as mesoporous catalysts, in the solvent free synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones through one‐pot three‐component condensation of ethyl acetoacetate, an aryl aldehyde and urea. Different reaction parameters including catalytic efficacy, solvent effect, and urea concentration are considered.     

Attempted synthesis of ethyl 3,4‐dihydro‐2H‐1,4‐benzoxazine‐3‐carboxylate and 3‐acetate derivatives

Ethyl 3,4‐dihydro‐2H‐1,4‐benzoxazine‐3‐carboxylate derivatives 2 were obtained and isolated in low yields from the condensation of 2‐aminophenol and ethyl 2,3‐dibromopropanoate. They can be obtained by hydrogenation of ethyl 2H‐1,4‐benzoxazine‐3‐carboxylate in satisfactory yield. Using 2‐iminophenol did not direct the condensation with ethyl 2,3‐dibromopropanoate towards 2 but was fruitfull for the preparation of ethyl 2‐(4‐benzyl‐3,4‐dihydro‐2H‐1,4‐benzoxazin‐3‐yl)acetate from ethyl bromocrotonate.     

Unexpected Course of the Reaction of 2‐Unsubstituted 1H‐Imidazole 3‐Oxides with Ethyl Acrylate

The attempted ethenylation at C(2) of 2‐unsubstituted 1H‐imidazole N‐oxides with ethyl acrylate (=prop‐2‐enoate) in the presence of Pd(OAc)₂ does not occur. In contrast to the other aromatic N‐oxides, the [2+3] cycloaddition of imidazole N‐oxides predominates, and 3‐hydroxyacrylates, isomeric with the cycloadducts, are key products for the subsequent reaction. The final products were identified as dehydrated 2+1 adducts of 1H‐imidazole N‐oxide and ethyl acrylate. The role of the catalyst is limited to the dehydration of the intermediate 3‐hydroxypropanoates to give 1H‐imidazol‐2‐yl‐substituted acrylates.     

Synthesis and biological activities of quinolone analogues: Pyridazino[3,4‐b]quinoxalin‐4‐one

Quinolone analogues I‐VI with pyridazino[3,4‐b]quinoxaline ring system were synthesized form the (l‐alkylhydrzino)quinoxalina N‐oxides 1 via oxidation of pyridazino[3,4‐b]quinoxalines 2,3,5,7 , quinoxalino[2,3‐c]cinnolines 4 , and 1,2‐dizepino[3,4‐b]quinoxalines 6 . The biological activities of quinolone analogues IVa (N₁‐methyl‐C₃‐methyl), Va (N₁‐methyl‐C₃‐ethyl), and VI (N₁‐methyl‐C₃‐H) were superior to those of quinolone analogues I (N₁‐ethyl‐C₃‐carboxyl), 26b (N₁‐ethyl‐C₃‐carboxylate), and IIIc,d [N₁‐alkyl‐C₃‐(CH₂)₃COOC₂H₅].     

Improved Molecular Weight Control in Ring‐Opening Metathesis Polymerization (ROMP) Reactions with Ru‐Based Olefin Metathesis Catalysts Using N Donors and Acid: A Kinetic and Mechanistic Investigation

The effect of the addition of H₃PO₄ on the ROMP activity of cyclooctene (COE) with first‐ [Cl₂(PCy₃)₂Ru?CHPh] and second‐generation [(H₂IMes)Cl₂(PCy₃)Ru?CHPh] Grubbs’ catalysts 1 and 4 (Cy=cyclohexyl, Ph=phenyl, Mes=2,4,6‐trimethylphenyl (mesityl)), their inhibited mixtures with 1‐methylimidazole (MIM), as well as their isolated bis‐N,N′‐dimethylaminopyridine (DMAP) derivatives [Cl₂(PCy₃)(DMAP)₂Ru?CHPh)] ( 5 b ) and [Cl₂(H₂IMes)(DMAP)₂Ru?CHPh] ( 7 b ) (DMAP=dimethylaminopyridine), a novel catalyst, has been investigated. The studies include the determination of their initiation rates, as well as a determination of the molecular weights and molecular weight distributions of the polymers obtained with these catalysts and catalyst mixtures from the exo‐7‐oxanorbornene derivative 11 . The structure of catalyst 7 b was confirmed by means of X‐ray diffraction. All N‐donor‐bearing catalysts or N‐donor‐containing catalyst mixtures not only exhibited elevated activity in the presence of acid, but also increased initiation rates. Using the reversible inhibition/activation protocol with MIM and H₃PO₄ enabled us to conduct controlled ROMP with catalyst 4 producing the isolated exo‐7‐oxanorbornene‐based polymer 12 with predetermined molecular weights and narrow molecular weight distributions. This effect was based on fast and efficient catalyst initiation in contrast to the parent catalyst 4 . Hexacoordinate complex 5 b also experienced a dramatic increase in initiation rates upon acid‐addition and the ROMP reactions became well‐controlled in contrast to the acid‐free reaction. In contrast, complex 7 b performs well‐controlled ROMP in the absence of acid, whereas the polymerization of the same monomer becomes less controlled in the presence of H₃PO₄. The closer evaluation of catalysts 5 b and 7 b demonstrated that their initiation rates exhibit a linear dependency on the substrate concentration in contrast to catalysts 1 and 4 . As a consequence, their initiation rates are determined by an associative step, not a dissociative step as seen for catalysts 1 and 4 . A feasible associative metathesis initiation mechanism is proposed.     

Synthesis and Selected Transformations of 1H‐Imidazole 3‐Oxides Derived from Amino Acid Esters

A series of new optically active 1H‐imidazole 3‐oxides 5 with a substituted acetate group at N(1) as the chiral unit were prepared by the reaction of α‐(hydroxyimino) ketones, α‐amino acid methyl esters, and formaldehyde. In an analogous reaction, ethyl 2‐(hydroxyimino)‐3‐oxobutyrate and 1,3,5‐trialkylhexahydro‐1,3,5‐triazines gave 3‐oxido‐1H‐imidazole‐4‐carboxylates 14 , which easily rearranged into the 2‐oxo derivatives 15 . Selected examples of N‐oxides 5 could be transformed into the corresponding 2,3‐dihydro‐1H‐imidazole‐2‐thione derivatives 10 via a ‘sulfur‐transfer reaction’, and the reduction of the histidine derivative 5i with Raney‐Ni yielded the optically active 2,3‐bis(imidazolyl)propanoate 12 . Furthermore, reaction of the (1H‐imidazol‐1‐yl)acetates with primary amines yielded the corresponding acetamides.     

Synthesis of 2,3‐Diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐ol Derivatives by the Reaction of Aryl(3‐isocyanopyridin‐4‐yl)methanones with Aryl Grignard Reagents

The reaction of aryl(3‐isocyanopyridin‐4‐yl)methanones 1 , easily prepared from commercially available pyridin‐3‐amine, with aryl Grignard reagents gave, after aqueous workup, 2,3‐diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐ols 2 . These rather unstable alcohols were O‐acylated with Ac₂O in pyridine in the presence of a catalytic amount of 4‐(dimethylamino)pyridine (DMAP) to afford the corresponding 2,3‐diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐yl acetates 3 in relatively good yields.     

Pyridine‐2(1H)‐thiones: Versatile Precursors for Novel Pyrazolo[3,4‐b]pyridine,Thieno[2,3‐b]pyridines,and Their Fused Azines

Pyridine‐2(1H)‐thiones were prepared and reacted with several active halogenated reagents to afford novel thieno[2,3‐b]pyridines in excellent yields. Thieno[2,3‐b]pyridine‐2‐carbohydrazide derivative was prepared by the reaction of either ethyl 2‐((3‐cyanopyridin‐2‐yl)thio)acetate derivative or thieno[2,3‐b]pyridine‐2‐carboxylate derivative with hydrazine hydrate. On the other hand, the reaction of either pyridine‐2(1H)‐thione or ethyl 2‐((pyridin‐2‐yl)thio)acetate derivative with hydrazine hydrate afforded the corresponding 1H‐pyrazolo[3,4‐b]pyridine derivative. Thieno[2,3‐b]pyridine derivatives reacted with several reagents to afford the corresponding pyrimidine‐4(3H)‐ones and [1,2,3]triazin‐4‐(3H)‐one. Moreover, 2‐carbohydrazide derivative reacted with β‐dicarbonyl reagents to give 2‐((3‐methyl‐1H‐pyrazol‐1‐yl)carbonyl)thienopyridines. The structure of the target molecules is elucidated using elemental analyses and spectral data.     

High fluorescent ethyl acrylate modified PEDOT‐MeNH2 with enhanced electrochromic performance

Two poly(2'‐aminomethyl‐3,4‐ethylenedioxythienylene) (PEDOT‐MeNH₂) derivatives were successfully synthesized by electrochemical polymerization of precursors, diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)azanediyl)dipropanoate ( monomer 1 ) and ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)amino)propanoate ( monomer 2 ), respectively. Structure–property relationships of monomers and polymers, including electrochemical, optical properties, and morphology, were systematically explored. Significantly, the designed polymers exhibited red and orange emission signatures with high fluorescence quantum yields (Φ_F) of 0.044 and 0.045 compared with those of monomers; they may be used as building blocks for rational design of fluorescent materials. Moreover, cyclic voltammetry and spectroelectrochemistry studies demonstrated that poly(diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)azanediyl) dipropanoate) ( P1 ) and poly(ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)amino) propanoate) ( P2 ) can be reversibly oxidized and reduced accompanied by obvious color changes from light purple to light blue for P1 , and from purple to blue for P2 . Furthermore, both P1 and P2 displayed higher optical contrasts (40–70%) in the visible region, favorable coloration efficiency (typically 50–230 cm² C^?1). From these results, the two polymers would be promising candidate materials for display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2081–2091     

Hydroxamic Acid‐Piperidine Conjugate is an Activated Catalyst for Lysine Acetylation under Physiological Conditions

Lysine acylation of proteins is an essential chemical reaction for posttranslational modification and as a means of protein modification in various applications. N,N‐Dimethyl‐4‐aminopyridine (DMAP) derivatives are widely‐used catalysts for lysine acylation of proteins; however, the DMAP moiety mostly exists in a protonated, and thus deactivated, form under physiological conditions due to its basicity. An alternative catalytic motif furnishing higher acylation activity would further broaden the possible applications of chemical lysine acylation. We herein report that the hydroxamic acid‐piperidine conjugate Ph‐HXA is a more active catalytic motif for lysine acetylation than DMAP under physiological conditions. In contrast to DMAP, the hydroxamic acid moiety is mostly deprotonated under aqueous neutral pH, resulting in a higher concentration of the activated form. The Ph‐HXA catalyst is also more tolerant of deactivation by a high concentration of glutathione than DMAP. Therefore, Ph‐HXA might be a suitable catalytic motif for target protein‐selective and site‐selective acetylation in cells.     

Simple Synthesis of Quinoxalin‐2(1H)‐one N‐Oxides from N‐Aryl‐2‐nitrosoanilines and Alkylated Cyanoacetic Esters

N‐Aryl‐2‐nitrosoanilines, available from the reaction of N‐arylamines with nitroarenes, condense under alkaline conditions with alkylated derivatives of cyanoacetic esters furnishing quinoxalin‐2(1H)‐one N‐oxides in good to excellent yields. The reaction involves the condensation of the carbanion with the nitroso group leading to the nitrone intermediate, followed by intramolecular acylation of the amine function.     

Vapor‐Phase Aldolization of n‐Butyraldehyde to 2‐Ethyl‐2‐Hexenal over Solid‐Base Catalysts

Vapor‐phase aldol condensation of n‐butyraldehyde to 2‐ethyl‐2‐hexenal was studied at 1 atm and 150～ 300°C in a fixed‐bed, integral‐flow reactor by using NaX, KX, γ‐Al₂O₃ and Na/NaOH/γ‐Al₂CO₃ catalysts. Ion exchange of NaX zeolite with potassium acetate solution results in a decrease of crystallinity and apparent lowering of surface area, whereas the basic strength is enhanced. Treatment of γ‐Al₂O₃ with NaOH and Na causes a large decrease of the surface area but strong enhancement of the catalyst basicity. The catalytic activity on the basis of unit surface area is in the order Na/NaOH/γ‐Al₂O₃ < KXU < KXW < NaX >γ‐Al₂O₃, in accordance with the relative catalyst basic strength. The molar ratio of trimeric to dimeric products increases with increasing the reaction temperature and the catalyst basic strength except for Na/NaOH/γ‐Al₂O₃. Very high selectivity of 2‐ethyl‐2‐hexenal (>98.5%) was observed for reactions over NaX zeolite at 150°C. Based on the FT‐IR and the catalytic results, the reaction paths are proposed as follows: self‐aldol condensation of n‐butyraldehyde, followed by dehydration produces 2‐ethyl‐2‐hexenal, which then reacts with n‐butyraldehyde and successively dehydrates to 2,4‐diethyl‐2,4‐octadienal and 1,3,5‐triethylbenzene. For the reaction over NaX, the calculated Arrhenius frequency factor and activation energy are 314 mol/g·h and 32.6 kJ/mol, respectively.     

Utility of 1‐Chloro‐3,4‐dihydronaphthalene‐2‐carboxaldehyde in the Synthesis of Novel Heterocycles with Pharmaceutical Interest

Ethyl α‐cyano‐β‐(1‐chloro‐3,4‐dihydronaphthalene‐2‐yl) acrylate (2) was prepared by the Knoevenagel condensation of 1 with ethyl cyanoacetate. Compound 2 was used as the key intermediate to prepare Schiff bases (3a, b), benzo[c]acridine (4), naphthyl thiopyrimidine (5), and pyrazolo[2,3‐a]‐benzo[h]quinazoline (6) derivatives through its reaction with hydrazines, p‐ansidine, thiourea, and 3,5‐diamino‐4‐phenylazopyrazole, respectively. Base‐catalyzed cyclocondensation of 1 with hippuric acid gives oxazolone derivative (7). Reaction of compound 7 with aniline gave imidazolone derivative (9). Treatment of compound 1 with different types of diaminopyrazoles gave 6,7‐dihydro‐pyrazolo[2,3‐a]‐benzo[h]quinazoline (10–13) derivatives. The multicomponent reaction of compound 1 with pyrazolone and malononitrile in the presence of ammonium acetate furnished pyrazolo[3,4‐b]‐benzo[h]quinoline (14) while in the presence of piperidine afforded benzo[h]chromeno[2,3‐c]pyrazole derivative 15.     

Isocyanide‐Based Three‐Component Synthesis of Highly Substituted 1,6‐Dihydro‐6,6‐dimethylpyrazine‐2,3‐dicarbonitrile, 3,4‐Dihydrobenzo[g]quinoxalin‐2‐amine,and 3,4‐Dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine Derivatives

A novel and efficient isocyanide‐based multicomponent reaction between alkyl or aryl isocyanides 1 , 2,3‐diaminomaleonitrile ( 2 ), naphthalene‐2,3‐diamines ( 6 ) or benzene‐1,2‐diamine ( 9 ), and 3‐oxopentanedioic acid ( 3 ) or Meldrum's acid ( 4 ) or ketones 7 was developed for the ecologic synthesis, at room temperature under mild conditions, of 1,6‐dihydropyrazine‐2,3‐dicarbonitriles 5a – 5f in H₂O without using any catalyst, and of 3,4‐dihydrobenzo[g]quinoxalin‐2‐amine and 3,4‐dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine derivatives 8a – 8g and 10a – 10e , respectively, in the presence of a catalytic amount of p‐toluenesulfonic acid (TsOH) in EtOH, in good to excellent yields (Scheme 1).     

Chinazolincarbonsäuren. XII. Mitteilung. Synthese von [2-(Ethoxycarbonyl)-3,4-dihydro-4-oxochinazolin-3-yl]-, [2-(Ethoxycarbonyl)chinazolin-4-yloxy]- und (5,6,7,8-Tetrahydro-2-phenylchinazolin-4-ylthio)alkansäure-estern

Quinazolinecarboxylic Acids. Synthesis of Alkyl [2-(Ethoxycarbonyl)-3,4-dihydro-4-oxoquinazolin-3-yl]-, [2-(Ethoxycarbonyl)quinazolin-4-yloxy]- and (5,6,7,8-Tetrahydro-2-phenylquinazolin-4-ylthio)alkanoates The [(2-aminobenzoyl)amino]alkanoic acids and their esters 1 showed a different reaction behaviour with diethyl oxalate. Compound 1 (n = 2,3) was converted into the quinazolinylalkanoates 3 . o-Aminohippurate yielded with ethyl (chloroformyl)formate a mixture of the amide 4 and the cyclized quinazolinone 7b . Ethyl 3,4-dihydro-4-oxoquinazoline-2-carboxylate ( 6 ) reacted with 2-bromoalkanoates, in the presence of NaH, to the [2-(ethoxycarbonyl)-3,4-dihydro-4-oxoquinazolin-3-y1]acetates 7 in the case of alkyl bromoacetate, and to the O-alkylated derivatives 8 with the ethyl 2-bromopropionate and -butyrate. 2-Aminobenzamide ( 5 ) gave with ethyl 3-(chloroformyl)-2-propenoate and methyl 3-(chloroformyl)propionate the amides 9 or 11 , respectively, and not the expected quinazolinones. The cyclized product 12 was obtained from 11 and ethyl bromoacetate. Tetrahydroquinazolin-4(3H)-thione 14 was synthesized by the reaction of 13 with NH₃, and it was alkylated at the S-atom with bromoalkanoates to 15 . The hydrazide 16 was synthesized from 15b with hydrazine hydrate.     

Site‐Selective Acylations with Tailor‐Made Catalysts

The acylation of alcohols catalyzed by N,N‐dimethylamino pyridine (DMAP) is, despite its widespread use, sometimes confronted with substrate‐specific problems: For example, target compounds with multiple hydroxy groups may show insufficient selectivity for one hydroxyl, and the resulting product mixtures are hardly separable. Here we describe a concept that aims at tailor‐made catalysts for the site‐specific acylation. To this end, we introduce a catalyst library where each entry is constructed by connecting a variable and readily tuned peptide scaffold with a catalytically active unit based on DMAP. For selected examples, we demonstrate how library screening leads to the identification of optimized catalysts, and the substrates of interest can be converted with a markedly enhanced site‐selectivity compared with only DMAP. Furthermore, substrate‐optimized catalysts of this type can be used to selectively convert “their” substrate in the presence of structurally similar compounds, an important requisite for reactions with mixtures of substances.     

Efficient four‐component synthesis of spiroindole derivatives catalysed by a versatile and reusable nano‐paramagnetic catalyst

A simple, efficient and environmentally benign route was developed for the preparation of spiro(indoline‐3,4‐pyrano[2,3‐c ]pyrazole) derivatives with good yields from condensation of isatins, malononitrile (or ethyl cyanoacetate), hydrazine hydrate and ethyl acetoacetate catalysed by PFu@Fe₃O₄ nanocomposite. The use of easily available catalyst, shorter reaction times, better yields, simplicity of reaction, heterogeneous system and easy work‐up are the advantages of the method presented. Characterization of the catalyst was performed using Fourier transform infrared spectroscopy, X‐ray diffraction and transmission electron microscopy.     

Quinolone analogues 2. A facile synthesis of novel 3‐substituted 1‐alkyl‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalines

The reaction of the 2‐(1‐alkylhydrazino)‐6‐chloroquinoxaline 4‐oxides 1a,b with diethyl acetone‐dicarboxylate or 1,3‐cyclohexanedione gave ethyl 1‐alkyl‐7‐chloro‐3‐ethoxycarbonylmethylene‐1,5‐dihydropyridazino[3,4‐b]quinoxaline‐3‐carboxylates 5a,b or 6‐alkyl‐10‐chloro‐1‐oxo‐1,2,3,4,6,12‐hexahydroquinoxalino[2,3‐c]cinnolines 7a,b , respectively. Oxidation of compounds 5a,b with nitrous acid afforded the ethyl 1‐alkyl‐7‐chloro‐3‐ethoxycarbonylmethylene‐4‐hydroxy‐1,4‐dihydropyridazino‐[3,4‐b]quinoxaline‐4‐carboxylates 9a,b , whose reaction with base provided the ethyl 2‐(1‐alkyl‐7‐chloro‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)acetates 6a,b , respectively. On the other hand, oxidation of compounds 7a,b with N‐bromosuccinimide/water furnished the 4‐(1‐alkyl‐7‐chloro‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)butyric acids 8a,b , respectively. The reaction of compound 8a with hydroxylamine gave 4‐(7‐chloro‐4‐hydroxyimino‐1‐methyl‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)‐butyric acid 12 .     

Reduction of 3‐Aminoquinoline‐2,4(1H,3H)‐diones and Deamination of the Reaction Products

3‐Aminoquinoline‐2,4‐diones were stereoselectively reduced with NaBH₄ to give cis‐3‐amino‐3,4‐dihydro‐4‐hydroxyquinolin‐2(1H)‐ones. Using triphosgene (=bis(trichloromethyl) carbonate), these compounds were converted to 3,3a‐dihydrooxazolo[4,5‐c]quinoline‐2,4(5H,9bH)‐diones. The deamination of the reduction products using HNO₂ afforded mixtures of several compounds, from which 3‐alkyl/aryl‐2,3‐dihydro‐1H‐indol‐2‐ones and their 3‐hydroxy and 3‐nitro derivatives were isolated as the products of the molecular rearrangement.     

Studies in Thio‐Claisen Rearrangement: Regioselective Synthesis of Thiopyrano[2,3‐b]pyran‐2‐ones and Thieno[2,3‐b]pyran‐2‐ones

Abstract

4‐Mercapto‐6‐methyl‐2‐pyrone was alkylated with different allylic and propargylic halides under phase transfer catalyzed condition in the presence of TBAB or BTEAC catalyst in chloroform–aqueous NaOH (1%) at room temperature. The S‐alkylated thiopyran‐2‐ones were then refluxed in quinoline or in chlorobenzene to give 4‐chloromethylthiopyrano[2,3‐b]pyran‐2‐one and 4‐hydroxymethylthiopyrano[2,3‐b]pyran‐2‐one or several thieno[2,3‐b]pyran‐2‐ones.