Simultaneous Generation of H2O2 and Formate by Co-Electrolysis of Water and CO2 over Bifunctional Zn/SnO2 Nanodots

Hydrogen peroxide (H₂O₂) and formate are important chemicals used in various chemical manufacturing industries. One promising approach for the simultaneous production of these chemicals is coupling anodic two-electron water oxidation with cathodic CO₂ reduction in an electrolyzer using nonprecious bifunctional electrocatalysts. Herein, we report an innovative hybrid electrosynthesis strategy using Zn-doped SnO₂ (Zn/SnO₂) nanodots as bifunctional redox electrocatalysts to achieve Faradaic efficiencies of 80.6 % and 92.2 % for H₂O₂ and formate coproduction, respectively, along with excellent stability for at least 60 h at a current density of ≈150 mA cm⁻². Through a combination of physicochemical characterizations, including operando attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), isotope labeling mass spectrometry (MS)/¹H NMR and quasi-in situ electron paramagnetic resonance (EPR), with density functional theory (DFT) calculations, we discovered that the Zn dopant facilitates the coupling of *OH intermediates to promote H₂O₂ production and optimizes the adsorption of *OCHO intermediates to accelerate formate formation. Our findings offer new insights into designing more efficient bifunctional electrocatalyst-based pair-electrosynthesis system for the coproduction of H₂O₂ and formate feedstocks.     

Experimental and Kinetic Modeling Study of C2H2 Oxidation at High Pressure

A detailed chemical kinetic model for oxidation of acetylene at intermediate temperatures and high pressure has been developed and evaluated experimentally. The rate coefficients for the reactions of C₂H₂ with HO₂ and O₂ were investigated, based on the recent analysis of the potential energy diagram for C₂H₃ + O₂ by Goldsmith et al. and on new ab initio calculations, respectively. The C₂H₂ + HO₂ reaction involves nine pressure‐ and temperature‐dependent product channels, with formation of triplet CHCHO being dominant under most conditions. The barrier to reaction for C₂H₂ + O₂ was found to be more than 50 kcal mol^?1 and predictions of the initiation temperature were not sensitive to this reaction. Experiments were conducted with C₂H₂/O₂ mixtures highly diluted in N₂ in a high‐pressure flow reactor at 600–900 K and 60 bar, varying the reaction stoichiometry from very lean to fuel‐rich conditions. Model predictions were generally in satisfactory agreement with the experimental data. Under the investigated conditions, the oxidation pathways for C₂H₂ are more complex than those prevailing at higher temperatures and lower pressures. Acetylene is mostly consumed by recombination with H to form vinyl (reducing conditions) or with OH to form a CHCHOH adduct (stoichiometric to lean conditions). Both C₂H₃ and CHCHOH then react primarily with O₂. The CHCHOH + O₂ reaction leads to formation of significant amounts of glyoxal (OCHCHO) and formic acid (HOCHO), and the oxidation chemistry of these intermediates is important for the overall reaction.     

Surface Reaction Kinetics of the Oxidation and Reforming of CH4 over Rh/Al2O3 Catalysts

An 48‐step sur face reaction mechanism with thermodynamic consistent kinetic data is presented for the catalytic conversion of the gaseous chemical system H₂/O₂/H₂O/CO/CO₂/CH₄ over Rh/Al₂O₃ catalysts. Total and partial oxidation as well as steam reforming and dry reforming of methane over Rh catalysts is studied experimentally and numerically at varying temperature and composition. The results are used to extend the kinetic schemes we developed for H₂ oxidation, CO oxidation kinetics, and the water‐gas‐shift reactions in former studies. Aside from the experiments in a stagnation‐flow reactor presented here, we modeled a number of experiments from the literature to test the newly established kinetic scheme.     

Detection of Metal Ions (Cu2+, Hg2+) and Cocaine by Using Ligation DNAzyme Machinery

The Cu²⁺‐dependent ligation DNAzyme is implemented as a biocatalyst for the colorimetric or chemiluminescence detection of Cu²⁺ ions, Hg²⁺ ions, or cocaine. These sensing platforms are based on the structural tailoring of the sequence of the Cu²⁺‐dependent ligation DNAzyme for specific analytes. The tethering of a subunit of the hemin/G‐quadruplex DNAzyme to the ligation DNAzyme sequence, and the incorporation of an imidazole‐functionalized nucleic‐acid sequence, which acts as a co‐substrate for the ligation DNAzyme that is tethered to the complementary hemin/G‐quadruplex subunit. In the presence of different analytes, Cu²⁺ ions, Hg²⁺ ions, or cocaine, the pretailored Cu²⁺‐dependent ligation DNAzyme sequence stimulates the respective ligation process by combining the imidazole‐functionalized co‐substrate with the ligation DNAzyme sequence. These reactions lead to the self‐assembly of stable hemin/G‐quadruplex DNAzyme nanostructures that enable the colorimetric analysis of the substrate through the DNAzyme‐catalyzed oxidation of 2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid), ABTS^2?, by H₂O₂ into the colored product ABTS^.?, or the chemiluminescence detection of the substrate through the DNAzyme‐catalyzed oxidation of luminol by H₂O₂. The detection limits for the sensing of Cu²⁺ ions, Hg²⁺ ions, and cocaine correspond to 1 nM , 10 nM and 2.5 μM , respectively. These different sensing platforms also reveal impressive selectivities.     

Catalytic CO Oxidation by O2 Mediated by Noble‐Metal‐Free Cluster Anions Cu2VO3–5−

Catalytic CO oxidation by molecular O₂ is an important model reaction in both the condensed phase and gas‐phase studies. Available gas‐phase studies indicate that noble metal is indispensable in catalytic CO oxidation by O₂ under thermal collision conditions. Herein, we identified the first example of noble‐metal‐free heteronuclear oxide cluster catalysts, the copper–vanadium bimetallic oxide clusters Cu₂VO_3–5^? for CO oxidation by O₂. The reactions were characterized by mass spectrometry, photoelectron spectroscopy, and density functional calculations. The dynamic nature of the Cu?Cu unit in terms of the electron storage and release is the driving force to promote CO oxidation and O₂ activation during the catalysis.     

Methanol conversion over CuO supported on CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript>: An in situ IR spectroscopic study

The main reactions yielding hydrogen are the recombination of hydrogen atoms on copper clusters and methyl formate decomposition. Methyl formate results from the interaction between the linear methoxy group and the formate complex located on CuO. The source of CO₂ appearing in the gas phase is the formate complex, and the source of CO is methyl formate. The rates of methoxy group conversion and product formation over supports (ZrO₂, CeO₂, Ce_0.8Zr_0.2O₂) and copper-containing catalysts (5%Cu/CeO₂, 5%Cu/ZrO₂, 2%Cu/Ce_0.8Zr_0.2O₂, 2%Cu/Ce_0.1Y_0.1Zr_0.8) are compared. The dominant process in methoxy group conversion over the supports and copper-containing catalysts is methanol decomposition to H₂ and CO and to H₂ and CO₂, respectively. The methoxy group conversion rate is proportional to the H₂ and CO₂ formation rate and is determined by the concentration of supported copper.     

Reoxidation of Transition‐metal Catalysts with O2

Transition‐metal catalyzed oxidation reactions are central components of organic chemistry. On behalf of green and sustainable chemistry, molecular oxygen (O₂) has been considered as an ideal oxidant due to its natural, inexpensive, and environmentally friendly characters, and therefore offers attractive academic and industrial prospects. In recent years, some powerful organic oxidation methods have been continuously developed. Among them, the use of molecular oxygen (O₂) as a green and sustainable oxidant has attracted considerable attentions. However, the development of new transition metal‐catalyzed protocols using O₂ as an ideal oxidant is highly desirable but very challenging because of the low standard electrode potential of O₂ to reoxidize the transition‐metal catalysts. In this Account, we highlight some of our progress toward the use of transition‐metal catalyzed aerobic oxidation reactions. Through the careful selection of ligand and the acidic additives, we have successfully realized the reoxidation of Cu, Pd, Mn, Fe, Ru, Rh, and bimetallic catalysts under O₂ or air atmosphere (1 atm) for the oxidative coupling, oxygenation reactions, oxidative C‐H/C‐C bond cleavage, oxidative annulation, and olefins difunctionalization reactions. Most of the reactions can tolerate a range of functional groups. These methods provide new strategies for the green synthesis of alkynes, (α ‐keto)amides/esters, ketones/diones, O/N‐heterocycles, β ‐azido alcohols, and nitriles. The high efficiency, low cost, and simple operation under air make these methodologies very attractive and practical. We will also discuss the mechanisms of these reactions which might be useful to promote the new type of aerobic oxidative reaction design.     

Boosting Electrochemical Reduction of CO2 at a Low Overpotential by Amorphous Ag‐Bi‐S‐O Decorated Bi0 Nanocrystals

Bimetal‐S‐O composites have been rarely researched in electrochemical reduction of CO₂. Now, an amorphous Ag‐Bi‐S‐O decorated Bi⁰ catalyst derived from Ag_0.95BiS_0.75O_3.1 nanorods by electrochemical pre‐treatment was used for catalyzing eCO₂RR, which exhibited a formate FE of 94.3 % with a formate partial current density of 12.52 mA cm^?2 at an overpotential of only 450 mV. This superior performance was attributed to the attached amorphous Ag‐Bi‐S‐O substance. S could be retained in the amorphous region after electrochemical pre‐treatment only in samples derived from metal‐S‐O composites, and it would greatly enhance the formate selectivity by accelerating the dissociation of H₂O. The existence of Ag would increase the current density, resulting in a higher local pH, which made the role of S in activating H₂O more significantly and suppressed H₂ evolution more effectively, thus endowing the catalyst with a higher formate FE at low overpotentials.     

Phosphite‐driven, [Cp*Rh(bpy)(H2O)]2+‐catalyzed reduction of nicotinamide and flavin cofactors: characterization and application to promote chemoenzymatic reduction reactions

The organometallic compound [Cp*Rh(bpy)(H₂O)]²⁺ is a versatile catalyst for the in situ regeneration of reduced nicotinamides and flavins by catalyzing the electron transfer between the cathode or formate to the oxidized cofactors and prosthetic groups. In the present contribution we demonstrate the feasibility of phosphite as an alternative source of reducing equivalents. Thus, [Cp*Rh(bpy)(H₂O)]²⁺ combines the catalytic activities of hydrogenases, formate and phosphite dehydrogenases in one catalyst. The catalytic properties of this novel regeneration approach are investigated, demonstrating that the general catalytic properties of [Cp*Rh(bpy)(H₂O)]²⁺ are preserved. The principal applicability to promote alcoholdehydrogenase‐catalyzed reduction reactions is demonstrated. Copyright © 2010 John Wiley & Sons, Ltd.     

Carbonized Hemoglobin Nanofibers for Enhanced H2O2 Detection

Electrospun hemoglobin (Hb) microbelts were used as a novel precursor to produce a new class of carbon nanofibers (Hb‐CNFs) containing Fe species (Fe₂O₃ and/or Fe‐N₄ moiety). The Hb‐CNFs modified glassy carbon electrode (Hb‐CNFs/GCE) exhibits significant oxidation/reduction towards H₂O₂. The observed H₂O₂ oxidation/reduction starting at ca. +0.26 V and +0.15 V (vs. Ag/AgCl) are significantly lower than the values observed at other CNFs modified GCE. The Hb‐CNFs/GCE was also applied to the amperometric detection of H₂O₂ and the results showed fast response, high sensitivity, excellent reproducibility, good selectivity, and wide dynamic range with good limit of detection.     

Epoxidation of olefins with H2O2 catalyzed by new symmetrical acetylacetone-based Schiff bases/Mn(II) homogeneous systems: A catalytic and EPR study

Two new symmetrical acetylacetone-based Schiff bases, herein called L_A and L_B, have been synthesized. The complexes formed by their association with Mn(II) have been evaluated for catalytic alkene epoxidation with H₂O₂. The catalytic efficiency of Mn(II)/L_A and Mn(II)/L_B systems were shown to be switched on by ammonium acetate with remarkable effectiveness and selectivity towards epoxides. EPR spectroscopy for Mn(II)/L_A shows that the catalytic centre is a mononuclear Mn complex. Additives that allow easier oxidation of Mn(II) to higher oxidation states, i.e. such as acetate and bicarbonate, can promote decisively the catalytic function. Additives that do not allow oxidation of Mn(II) to higher oxidation states, i.e. such as formate and oxalate, inhibit severely the catalytic function. Monocarboxylate ions, i.e. acetate, bicarbonate and formate do not disturb considerably the first coordination sphere of Mn(II). Dicarboxylate additives, i.e. such as oxalate, form strong complex with the Mn(II).Based on the catalytic and EPR data, a double role is suggested for ammonium acetate. This is to promote Mn(II) oxidation, and to function as a dual acid-base system, participating into the catalytic cycle.     

Understanding LiOH Chemistry in a Ruthenium‐Catalyzed Li–O2 Battery

Non‐aqueous Li–O₂ batteries are promising for next‐generation energy storage. New battery chemistries based on LiOH, rather than Li₂O₂, have been recently reported in systems with added water, one using a soluble additive LiI and the other using solid Ru catalysts. Here, the focus is on the mechanism of Ru‐catalyzed LiOH chemistry. Using nuclear magnetic resonance, operando electrochemical pressure measurements, and mass spectrometry, it is shown that on discharging LiOH forms via a 4 e⁻ oxygen reduction reaction, the H in LiOH coming solely from added H₂O and the O from both O₂ and H₂O. On charging, quantitative LiOH oxidation occurs at 3.1 V, with O being trapped in a form of dimethyl sulfone in the electrolyte. Compared to Li₂O₂, LiOH formation over Ru incurs few side reactions, a critical advantage for developing a long‐lived battery. An optimized metal‐catalyst–electrolyte couple needs to be sought that aids LiOH oxidation and is stable towards attack by hydroxyl radicals.     

Copper‐Catalyzed Oxidation of Alkanes with H2O2 under a Fenton‐like Regime

Copper complexes bearing readily available ligand systems catalyzed the oxidation of alkanes with H₂O₂ as the oxidant with high efficiency in remarkable yields (50–60 %). The reactions proceeded with unprecedented selectivity to give alkyl hydroperoxides as the major products. Detailed scrutiny of the reaction mechanism suggests the involvement of C‐centered and O‐centered radicals generated in a Fenton‐like fashion.     

Hydrogenation of CO2 to Formate with H2: Transition Metal Free Catalyst Based on a Lewis Pair

Hydrogenation of CO₂ to formate with H₂ in the absence of transition metal is a long‐standing challenge in catalysis. The reactions between tris(pentafluorophenyl)borane (BCF) and K₂CO₃ (or KHCO₃) are found to form a Lewis pair (K₂[(BCF)₂?CO₃]) which can react with both H₂ and CO₂ to produce formate. Based on these stoichiometric reactions, the first catalytic hydrogenation process of CO₂ to formate using transition metal free catalyst (BCF/M₂CO₃, M=Na, K, and Cs) is reported. The highest TON value of this catalytic process is up to 3941. Further research revealed the reaction mechanism in which the Lewis pair enables the splitting of H₂ and the insertion of CO₂ into the B?H bond.     

Electrochemical Formation of Fe(IV)=O Derived from H2O2 on a Hematite Electrode as an Active Catalytic Site for Selective Hydrocarbon Oxidation Reactions

The high-valence iron species (Fe(IV)=O) in the cytochrome P450 enzyme superfamily is generated via the activation of O₂, and serves as the active center of selective hydrocarbon oxidation reactions. Furthermore, P450 can employ an alternate route to produce Fe(IV)=O, even from H₂O₂ without O₂ activation. Meanwhile, Fe(IV)=O has recently been revealed to be the reactive intermediate during H₂O oxidation to O₂ on hematite electrodes. Herein, we demonstrated the generation of Fe(IV)=O on hematite electrodes during the electrochemical oxidative decomposition of H₂O₂ using in situ UV-visible absorption spectra. The generation of Fe(IV)=O on hematite electrodes from H₂O₂ exhibited 100 mV lower overpotential than that from H₂O. This is because H₂O₂ serves not only as the oxygen source of Fe(IV)=O, but also as the additional oxidant. Finally, we confirmed that the Fe(IV)=O generated on hematite electrodes can serve as the catalytic site for styrene epoxidation reactions.     

Influence of Zn(II) adsorption on the photocatalytic activity and the production of H2O2 over irradiated TiO2

The photocatalytic activity of semiconductor oxides, in particular TiO₂ powders or colloids, is a complex function of bulk (light absorption and scattering, charge carrier mobility and recombination rate) and surface (structure, defects and reconstruction, charge, presence of adsorbate, surface recombination centers) properties. Among surface modifications, the inner sphere surface complexation of metal cations can change the surface charge of the metal oxide, thus changing the surface activity coefficient of ionic substrates, the band edge positions, as well as the mechanism and kinetic of interfacial electron transfer by blocking surface trapping sites for photogenerated carriers (≡Ti?OH). In this work we show that in anatase/water systems under band-gap irradiation, both the organic substrate (formate) oxidation initiated by photogenerated valence band holes and the formation of hydrogen peroxide from O₂ reduction (by conduction band electrons) is strongly influenced by the presence of Zn²⁺ cations. Depending on the pH, the formate oxidation rate can be enhanced or nearly completely inhibited. The observed result can be rationalized by considering the fraction of ≡Ti?OH surface sites blocked by inner sphere complexation of Zn²⁺ as a function of pH. When this fraction is low, the more positive surface charge favors formate oxidation, whereas when the fraction is high the almost complete blockage of ≡Ti?OH surface sites by Zn²⁺ stops almost entirely formate oxidation. Interestingly, the surface complexation of Zn²⁺ is accompanied by an increasing production of H₂O₂ during formate degradation in the presence of O₂. Zn(II) cations are not complexed by peroxide/superoxide species derived from O₂ reduction. When ≡Ti?OH sites are blocked by Zn²⁺, the complexation on the TiO₂ surface of peroxide/superoxide species is inhibited, hindering their further transformation. The results presented demonstrate that the combined effect of pH and surface complexation of redox inert cations greatly influences both the oxidative and reductive processes during the photocatalytic process over TiO₂.     

Poly(bis‐2,2,2‐trifluoroethoxymethyl oxetane): Multiple crystal phases,crystallization‐induced surface topological complexity and enhanced hydrophobicity

Semicrystalline poly(bis‐trifluoroethoxymethyl)oxetane, P(B‐3FOx), was prepared by cationic ring‐opening polymerization at ?5 °C with M_n up to 21 kDa. Differences in cooling rates from the melt have substantial effects on crystal phase, percent crystallinity, surface topography, and wetting behavior. DSC and WAXD show that cooling from the melt at slow rates (<5 °C/min) gives α‐P(B‐3FOx) with ΔH_f = 22–27 J/g. Quenching from the melt results in β‐P(B‐3FOx) for which a mesophase structure is suggested. β‐P(B‐3FOx) melts at 53 °C followed by recrystallization to α‐P(B‐3FOx). Solution casting from THF results in third phase, γ‐P(B‐3FOx). TM‐AFM and SEM imaging for α‐P(B‐3FOx) showed that cold crystallization at 25 °C brought about increased crystallinity and surface topologies characterized by sharp asperities and lath‐shaped crystals. Spontaneous surface roughening of α‐P(B‐3FOx) results in a discontinuous three‐phase contact line with water and an increase in water sessile drop contact angle from 106° to 136°. The ～30° increase in water contact angle was attributed primarily to a topological change from a relatively smooth surface (Wenzel state) to an asperity‐rich surface yielding a discontinuous three‐phase contact line (composite of Wenzel and Cassie‐Baxter state). The oleophobicity for this polymer, which contains only a single ? CF₃ end group on each side chain, compares favorably with more highly fluorinated acrylates. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1022–1034, 2010     

Photocatalytic Hydrogen Production Coupled with Selective Benzylamine Oxidation over MOF Composites

Photocatalytic water splitting requires separation of the mixed H₂ and O₂ products and is often hampered by the sluggish O₂‐producing half reaction. An approach is now reported to address these issues by coupling the H₂‐producing half reaction with value‐added benzylamine oxidation reaction using metal–organic framework (MOF) composites. Upon MOF photoexcitation, the electrons rapidly reduce the protons to generate H₂ and the holes promote considerable benzylamine oxidation to N‐benzylbenzaldimine with high selectivity. Further experimental characterizations and theoretical calculation reveal that the highly conjugated s‐triazine strut in the MOF structure is crucial to the efficient charge separation and excellent photocatalytic activity.     

Quantum Dot Assembly for Light‐Driven Multielectron Redox Reactions,such as Hydrogen Evolution and CO2 Reduction

Light‐driven multielectron redox reactions (e.g., hydrogen (H₂) evolution, CO₂ reduction) have recently appeared at the front of solar‐to‐fuel conversion. In this Minireview, we focus on the recent advances in establishing semiconductor quantum dot (QD) assemblies to enhance the efficiencies of these light‐driven multielectron reduction reactions. Four models of QD assembly are established to promote the sluggish kinetics of multielectron transfer from QDs to cocatalysts, thus leading to an enhanced activity of solar H₂ evolution or CO₂ reduction. We also forecast the potential applications of QD assemblies in other multielectron redox reactions, such as nitrogen (N₂) fixation and oxygen (O₂) evolution from H₂O.     

Biocatalytic Oxidative Cascade for the Conversion of Fatty Acids into α‐Ketoacids via Internal H2O2 Recycling

The functionalization of bio‐based chemicals is essential to allow valorization of natural carbon sources. An atom‐efficient biocatalytic oxidative cascade was developed for the conversion of saturated fatty acids to α‐ketoacids. Employment of P450 monooxygenase in the peroxygenase mode for regioselective α‐hydroxylation of fatty acids combined with enantioselective oxidation by α‐hydroxyacid oxidase(s) resulted in internal recycling of the oxidant H₂O₂, thus minimizing degradation of ketoacid product and maximizing biocatalyst lifetime. The O₂‐dependent cascade relies on catalytic amounts of H₂O₂ and releases water as sole by‐product. Octanoic acid was converted under mild conditions in aqueous buffer to 2‐oxooctanoic acid in a simultaneous one‐pot two‐step cascade in up to >99 % conversion without accumulation of hydroxyacid intermediate. Scale‐up allowed isolation of final product in 91 % yield and the cascade was applied to fatty acids of various chain lengths (C6:0 to C10:0).