Synthesis and Biological Activity of New Chiral N‐Acylsulfonamide Bis‐oxazolidin‐2‐ones

A new series of chiral 5‐substituted bis‐oxazolidinones containing an acylsulfonamide moiety has been synthesized starting from chlorosulfonyl isocyanate, (l )‐ethyl lactate, and oxazolidin‐2‐ones. All the reactions were conducted at ambient temperature, and the N‐acylsulfonamide bis‐oxazolidin‐2‐ones were obtained with high yields within 2 h. Some of the newly synthesized compounds were evaluated in vitro against the virulent strain RH of Toxoplasma gondii and the human lymphocytes, and showed promising results.     

An Isotope‐Coded Fluorogenic Cross‐Linker for High‐Performance Target Identification Based on Photoaffinity Labeling

A photoaffinity labeling (PAL)‐based method for the rapid identification of target proteins is presented in which a high‐performance chemical tag, an isotope‐coded fluorescent tag (IsoFT), can be attached to the interacting site by irradiation. Labeled peptides can be easily distinguished among numerous proteolytic digests by sequential detection with highly sensitive fluorescence spectroscopy and mass spectrometry. Subsequent MS/MS analysis provides amino acid sequence information with a higher depth of coverage. The combination of PAL and heterogeneous target‐selecting techniques significantly reduces the amount of time and protein required for identification. An additional photocleavable moiety successfully accelerated proteomic analysis using cell lysate. This method is a widely applicable approach for the rapid and accurate identification of interacting proteins.     

Structural study of six cycloalkylammonium cinnamate salt structures featuring one‐dimensional columns and two‐dimensional hydrogen‐bonded networks

Six ammonium carboxylate salts, namely cyclopentylammonium cinnamate, C₅H₁₂N⁺·C₉H₇O₂⁻, (I), cyclohexylammonium cinnamate, C₆H₁₄N⁺·C₉H₇O₂⁻, (II), cycloheptylammonium cinnamate form I, C₇H₁₆N⁺·C₉H₇O₂⁻, (IIIa), and form II, (IIIb), cyclooctylammonium cinnamate, C₈H₁₈N⁺·C₉H₇O₂⁻, (IV), and cyclododecylammonium cinnamate, C₁₂H₂₆N⁺·C₉H₇O₂⁻, (V), are reported. Salts (II)–(V) all have a 1:1 ratio of cation to anion and feature three N⁺—H...O⁻ hydrogen bonds forming one‐dimensional hydrogen‐bonded columns consisting of repeating R₄³(10) rings, while salt (I) has a two‐dimensional network made up of alternating R₄⁴(12) and R⁶₈(20) rings. Salt (III) consists of two polymorphic forms, viz. form I having Z′ = 1 and form II with Z′ = 2. The latter polymorph has disorder of the cycloheptane rings in the two cations, as well as whole‐molecule disorder of one of the cinnamate anions. A similar, but ordered, Z′ = 2 structure is seen in salt (IV).     

Cinnamate‐functionalized poly(ester‐carbonate): Synthesis and its UV irradiation‐induced photo‐crosslinking

A functionalized cyclic carbonate monomer containing a cinnamate moiety, 5‐methyl‐5‐cinnamoyloxymethyl‐1,3‐dioxan‐2‐one (MC), was prepared for the first time with 1,1,1‐tri(hydroxymethyl) ethane as a starting material. Subsequent polymerization of the new cyclic carbonate and its copolymerization with L ‐lactide (LA) were successfully performed with diethyl zinc (ZnEt₂) as initiator/catalyst. NMR was used for microstructure identification of the obtained monomer and copolymers. Differential scanning calorimetry (DSC) was used to characterize the functionalized poly(ester‐carbonate). The results indicated that the copolymers displayed a single glass transition temperature (T_g) and the T_g decreased with increasing carbonate content and followed the Fox equation, indicative of a random microstructure of the copolymer. The photo‐crosslinking of the cinnamate‐carrying copolymer was also demonstrated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 161–169, 2009     

Mechanistic Investigation of Phenylalanine Ammonia Lyase by Using N‐Methylated Phenylalanines

N‐Methyl‐L ‐phenylalanine ( 5 ), N‐methyl‐4‐nitro‐L ‐phenylalanine ( 6 ), and N,N‐dimethyl‐4‐nitro‐L ‐phenylalanine ( 7 ?H⁺) were investigated as substrates or inhibitors of phenylalanine ammonia lyase from Petroselinum crispum. Whereas the former was a reluctant substrate (K_m =6.6 mM , k_cat =0.22 s^?1), no reverse reaction could be detected by using methylamine and (E)‐cinnamate ( 2 ). The K_m value for ammonia in the reverse reaction by using (E)‐cinnamate ( 2 ) was determined to be 4.4 and 2.6M at pH 8.8 and 10, respectively. The N‐methylated 4‐nitro‐L ‐phenylalanines 6 and 7 showed only strong inhibitory effects (K_i =130 nM and 8 nM , resp.). These and former results are discussed in terms of the mechanism of action of phenyalalanine and histidine ammonia lyases.     

Exploring the Effect of Bioisosteric Replacement of Carboxamide by a Sulfonamide Moiety on N‐Glycosidic Torsions and Molecular Assembly: Synthesis and X‐ray Crystallographic Investigation of N‐(β‐D‐Glycosyl)sulfonamides as N‐Glycoprotein Linkage Region Analogues

N‐Glycoprotein linkage region constituents, 2‐acetamido‐2‐deoxy‐β‐D ‐glucopyranose (GlcNAc) and asparagine (Asn) are conserved among all the eukaryotes. To gain a better understanding for nature’s choice of GlcNAcβAsn as linkage region constituents and inter‐ and intramolecular carbohydrate–protein interactions, a detailed systemic structural study of the linkage region conformation is essential. Earlier crystallographic studies of several N‐(β‐glycopyranosyl)alkanamides showed that N‐glycosidic torsion, ?_N, is influenced to a larger extent by structural variation in the sugar part than that of the aglycon moiety. To explore the effect of the bioisosteric replacement of a carboxamide group by a sulfonamide moiety on the N‐glycosidic torsions as well as on molecular assembly, several glycosyl methanesulfonamides and glycosyl chloromethanesulfonamides were synthesized as analogues of the N‐glycoprotein linkage region, and crystal structures of seven of these compounds have been solved. A comparative analysis of this series of crystal structures as well as with those of the corresponding alkanamido derivatives revealed that N‐glycosidic torsion, ?_N, does not alter significantly. Methanesulfonamido and chloromethanesulfonamido derivatives of GlcNAc display a different aglycon conformation compared to other sulfonamido analogues. This may be due to the cumulative effect of the direct hydrogen bonding between N1 and O1′ and C? H???O interactions of the aglycon chain, revealing the uniqueness of the GlcNAc as the linkage sugar.     

Synthesis and crystal structures of the potential tyrosinase inhibitors N‐(4‐acetylphenyl)‐2‐chloroacetamide and 2‐(4‐acetylanilino)‐2‐oxoethyl cinnamate

Substituted benzoic acid and cinnamic acid esters are of interest as tyrosinase inhibitors and the development of such inhibitors may help in diminishing many dermatological disorders. The tyrosinase enzyme has also been linked to Parkinson's disease. In view of hydroxylated compounds having ester and amide functionalities to potentially inhibit tyrosinase, we herein report the synthesis and crystal structures of two amide‐based derivatives, namely N‐(4‐acetylphenyl)‐2‐chloroacetamide, C₁₀H₁₀ClNO₂, (I), and 2‐(4‐acetylanilino)‐2‐oxoethyl cinnamate, C₁₉H₁₇NO₄, (II). In compound (I), the acetylphenyl ring and the N—(C=O)—C unit of the acetamide group are almost coplanar, with a dihedral angle of 7.39 (18)°. Instead of esterification, a cheaper and more efficient synthetic method has been developed for the preparation of compound (II). The molecular geometry of compound (II) is a V‐shape. The acetamide and cinnamate groups are almost planar, with mean deviations of 0.088 and 0.046 Å, respectively; the dihedral angle between these groups is 77.39 (7)°. The carbonyl O atoms are positioned syn and anti to the amide carbonyl O atom. In the crystals of (I) and (II), N—H…O, C—H…O and C—H…π interactions link the molecules into a three‐dimensional network.     

Photochemical modification of the lower critical solution temperature of cinnamoylated poly(N‐2‐hydroxypropylmethacrylamide) in water

Partial modification of the nonionic polymer poly(N‐2‐hydroxy‐propylmethacrylamide) by cinnamate produces stimuli‐responsive copolymers. The hydrophobic character of the cinnamate chromophore induces not only a lower critical solution temperature (LCST) in water, but renders additionally the polymers photoresponsive. For moderate cinnamate contents of 9 mol‐%, the photoisomerization of the trans‐cinnamate to cis‐cinnamate groups allows to switch the LCST by irradiation, whereas for higher cinnamate contents of 21 mol‐%, irradiation leads to intra‐ and intermolecular photocrosslinking.     

Solid‐Phase Synthesis of Sialyl Tn Antigen

Solid‐phase synthesis of sialyl Tn [α‐Neu5Ac‐(2→6)‐α‐GalNAc‐(1→O)‐Ser] antigen with Kenner's acylsulfonamide linker is described. The acylsulfonamide bond was found to be stable under glycosylation reactions using dimethyl(methylthio)sulfonium triflate (DMTST) as a promoter and basic conditions used for the removal of protecting groups. The solid‐phase reaction was monitored by the inverse gated decoupling ¹³C NMR technique, which enabled quantitative analysis of the reaction progress. At the end of the synthesis, the sulfamyl group of the linker was activated by treatment with (trimethylsilyl)diazomethane to provide a N‐methyl‐N‐acylsulfonamide. The acyl group was displaced with hydroxide to give the corresponding precursors of sialyl Tn antigen and its anomeric isomers, which were deprotected to afford the target molecules.      

Solid‐Phase Combinatorial Synthesis and Biological Evaluation of Destruxin E Analogues

The solid‐phase combinatorial synthesis of cyclodepsipeptide destruxin E has been demonstrated. The combinatorial synthesis of cyclization precursors 8 was achieved by using a split and pool method on SynPhase Lanterns. The products were successfully macrolactonized in parallel in the solution phase by using 2‐methyl‐6‐nitrobenzoic anhydride and 4‐(dimethylamino)pyridine N‐oxide to afford macrolactones 9 , and the subsequent formation of an epoxide in the side chain gave 18 member destruxin E analogues 6 . Biological evaluation of analogues 6 indicated that the N‐MeAla residue was crucial to the induction of morphological changes in osteoclast‐like multinuclear cells (OCLs). Based on structure–activity relationships, azido‐containing analogues 15 were then designed for use as a molecular probe. The synthesis and biological evaluation of analogues 15 revealed that 15 b , in which the Ile residue was replaced with a Lys(N₃) residue, induced morphological changes in OCLs at a sufficient concentration, and modification around the Ile residue would be tolerated for attachment of a chemical tag toward the target identification of destruxin E ( 1 ).     

C1‐Symmetric Bicyclo[2.2.2]octa‐2,5‐diene (bod*) Ligands in Rhodium‐Catalyzed Asymmetric 1,4‐Addition of Arylboronic Acids to Enones and 1,2‐Addition to N‐[(4‐Nitrophenyl)sulfonyl]imines

A set of ten C₁‐symmetric chiral bicyclo[2.2.2]octa‐2,5‐dienes (bod*) 2 (Fig. 1) were tested as ligands in Rh‐catalyzed arylation reactions. The 1,4‐addition of arylboronic acids to cyclohex‐2‐en‐1‐one, cyclopent‐2‐en‐1‐one, and tert‐butyl cinnamate proceeded smoothly with excellent enantioselectivities (up to 99% ee; Tables 1–3). The challenging 1,2‐addition of triphenylboroxine to N‐[(4‐nitrophenyl)sulfonyl]imines yielded the product in high yield and in good enantioselectivity (up to 92% ee; Table 4). Generally, the use of C₁‐symmetric chiral bod* ligands bearing bulky substituents resulted in lower enantioselectivities, whereas several electron‐poor and electron‐rich bod* ligands gave higher enantioselectivities than the benchmark ligands reported in literature.     

Two pseudo‐enantiomeric forms of N‐benzyl‐4‐hydroxy‐1‐methyl‐2,2‐dioxo‐1H‐2λ6,1‐benzothiazine‐3‐carboxamide and their analgesic properties

The fact that molecular crystals exist as different polymorphic modifications and the identification of as many polymorphs as possible are important considerations for the pharmaceutic industry. The molecule of N‐benzyl‐4‐hydroxy‐1‐methyl‐2,2‐dioxo‐1H‐2λ⁶,1‐benzothiazine‐3‐carboxamide, C₁₇H₁₆N₂O₄S, does not contain a stereogenic atom, but intramolecular hydrogen‐bonding interactions engender enantiomeric chiral conformations as a labile racemic mixture. The title compound crystallized in a solvent‐dependent single chiral conformation within one of two conformationally polymorphic P2₁2₁2₁ orthorhombic chiral crystals (denoted forms A and B). Each of these pseudo‐enantiomorphic crystals contains one of two pseudo‐enantiomeric diastereomers. Form A was obtained from methylene chloride and form B can be crystallized from N,N‐dimethylformamide, ethanol, ethyl acetate or xylene. Pharmacological studies with solid–particulate suspensions have shown that crystalline form A exhibits an almost fourfold higher antinociceptive activity compared to form B.     

Fabrication of a Stable Layer‐by‐Layer Thin Film Based on Diazoresin and Phenolic Hydroxy‐Containing Polymers via H‐Bonding

Using the self assembly technique, a stable multilayer films was successfully fabricated from diazoresin (DR) and poly(styrene‐co‐(N‐(p‐hydroxyphenyl)maleimide)) (P(S‐co‐HPMI)) followed by UV irradiation. The driving force of the self‐assembly was confirmed to be H‐bonding attraction between the diazonium group (—N₂⁺) of DR and the phenolic hydroxy group (—Ph—OH) of P(S‐co‐HPMI). A linkage conversion from H‐bond to covalent bond takes place after decomposition of the —N₂⁺ group using UV irradiation. As a result, the stability of the film towards polar solvents increases dramatically.     

PEG‐b‐PtBA‐b‐PHEMA well‐defined amphiphilic triblock copolymer: Synthesis,self‐assembly,and application in drug delivery

A series of well‐defined amphiphilic triblock copolymers, poly(ethylene glycol)‐b‐poly(tert‐butyl acrylate)‐b‐poly(2‐hydroxyethyl methacrylate) (PEG‐b‐PtBA‐b‐PHEMA), were synthesized via successive atom transfer radical polymerization (ATRP). ATRP of tBA was first initiated by PEG‐Br macroinitiator using CuBr/N,N,N′,N″,N′″‐pentamethyldiethylenetriamine as catalytic system to give PEG‐b‐PtBA diblock copolymer. This copolymer was then used as macroinitiator to initiate ATRP of HEMA, which afforded the target triblock copolymer, PEG‐b‐PtBA‐b‐PHEMA. The critical micelle concentrations of obtained amphiphilic triblock copolymers were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of formed aggregates were investigated by transmission electron microscopy and dynamic light scattering, respectively. Finally, an acid‐sensitive PEG‐b‐PtBA‐b‐P(HEMA‐CAD) prodrug via cis‐aconityl linkage between doxorubicin and hydroxyls of triblock copolymers with a high drug loading content up to 38%, was prepared to preliminarily explore the application of triblock copolymer in drug delivery. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New Lipophilic 2‐Amino‐N,N′‐dialkyl‐4,5‐dimethylimidazolium Cations: Synthesis,Structure, Properties,and Outstanding Thermal Stability in Alkaline Media

A series of new N,N′‐dialkyl‐4,5‐dimethylimidazolium cations possessing electron‐rich 2‐imidazolylidene‐ or phosphoranylidene‐amino substituents has been efficiently synthesized from common precursors, N,N′‐dialkyl‐4,5‐dimethylimidazol‐2‐ylidenes. The new lipophilic salts obtained have been found to be highly stable towards strong alkali under both biphasic and homogeneous conditions. Their exceptional aqueous base resistance, which has hitherto only been seen with peralkylated polyaminophosphazenium cations, may be attributed to three factors: aromatic stabilization, efficient resonance charge delocalization, and steric protection of the exocyclic nitrogen linkage due to bulky lipophilic N‐alkyl substituents.     

Quantitative analysis of N‐acylphosphatidylethanolamine molecular species in rat brain using solid‐phase extraction combined with reversed‐phase chromatography and tandem mass spectrometry

A novel method for the sensitive and selective identification and quantification of N‐acylphosphatidylethanolamine molecular species was developed. Samples were prepared using a combination of liquid–liquid and solid‐phase extraction, and intact N‐acylphosphatidylethanolamine species were determined by reversed‐phase high‐performance liquid chromatography coupled to positive electrospray tandem mass spectrometry. As a result of their biological functions as precursors for N‐acylethanolamines and as signaling molecules, tissue concentrations of N‐acylphosphatidylethanolamines are very low, and their analysis is additionally hindered by the vast excess of other sample components. Our sample preparation methods are able to selectively separate the analytes of interest from any expected biological interferences. Finally, the highest selectivity is achieved by coupling chromatographic separation and two N‐acyl chain specific selected reaction monitoring scans per analyte, enabling identification of both the N‐acyl chain and the phosphatidylethanolamine moiety. The validated method is suitable for the reliable quantification of N‐acylphosphatidylethanolamine species from rat brain with a lower limit of quantification of 10 pmol/g and a linear range up to 2300 pmol/g. In total, 41 N‐acylphosphatidylethanolamine molecular species with six different N‐acyl chains, amounting to a total concentration of 3 nmol/g, were quantified.     

Synthesis of 2‐Substituted 2‐Amino Ketones by Rhodium‐Catalyzed Reaction of N‐Sulfonyl‐1,2,3‐triazoles with 2‐Alkenols

A study on a rhodium(II )‐catalyzed reaction of N‐sulfonyl‐1,2,3‐triazoles with 2‐alkenols is reported. The reaction is initiated by insertion of an α‐imino carbene into the O–H linkage of alcohol, forming a 2‐alkenoxy enamide intermediate. A thermal [3,3]‐sigmatropic rearrangement follows to yield 2‐substituted 2‐amino ketone in a stereoselective manner. The successful application of this methodology to a formal synthesis of (–)‐α‐conhydrine is also described.     

Synthesis of O‐Acyl Isopeptides

O‐Acyl isopeptides, in which the N‐acyl linkage on the hydroxyamino acid residue (e.g., Ser and Thr) is replaced with an O‐acyl linkage, generally possess superior water‐solubility to their corresponding native peptides, as well as other distinct physicochemical properties. In addition, O‐acyl isopeptides can be rapidly converted into their corresponding native peptide under neutral aqueous conditions through an O‐to‐N acyl migration. By exploiting these characteristics, researchers have applied the O‐acyl isopeptide method to various peptide‐synthesis fields, such as the synthesis of aggregative peptides and convergent peptide synthesis. This O‐acyl‐isopeptide approach also serves as a means to control the biological function of the peptide in question. Herein, we report the synthesis of O‐acyl isopeptides and some of their applications.     

Glycosidic linkage,N‐acetyl side‐chain,and other structural properties of methyl 2‐acetamido‐2‐deoxy‐β‐d‐glucopyranosyl‐(1→4)‐β‐d‐mannopyranoside monohydrate and related compounds

The crystal structure of methyl 2‐acetamido‐2‐deoxy‐β‐d ‐glycopyranosyl‐(1→4)‐β‐d ‐mannopyranoside monohydrate, C₁₅H₂₇NO₁₁·H₂O, was determined and its structural properties compared to those in a set of mono‐ and disaccharides bearing N‐acetyl side‐chains in βGlcNAc aldohexopyranosyl rings. Valence bond angles and torsion angles in these side chains are relatively uniform, but C—N (amide) and C—O (carbonyl) bond lengths depend on the state of hydrogen bonding to the carbonyl O atom and N—H hydrogen. Relative to N‐acetyl side chains devoid of hydrogen bonding, those in which the carbonyl O atom serves as a hydrogen‐bond acceptor display elongated C—O and shortened C—N bonds. This behavior is reproduced by density functional theory (DFT) calculations, indicating that the relative contributions of amide resonance forms to experimental C—N and C—O bond lengths depend on the solvation state, leading to expectations that activation barriers to amide cis–trans isomerization will depend on the polarity of the environment. DFT calculations also revealed useful predictive information on the dependencies of inter‐residue hydrogen bonding and some bond angles in or proximal to β‐(1→4) O‐glycosidic linkages on linkage torsion angles ? and ψ. Hypersurfaces correlating ? and ψ with the linkage C—O—C bond angle and total energy are sufficiently similar to render the former a proxy of the latter.     

Polyaddition of bifunctional 1,3‐benzoxazine and 2‐methylresorcinol

A polyaddition system consisted of a bifunctional N‐n‐propyl benzoxazine and 2‐methylresorcinol ( MR ) that proceeds at ambient temperature has been developed. In this system, the aromatic ring of MR acted as a bifunctional monomer, reacting with a two equivalent amount of benzoxazine moieties via their ring‐opening reaction. The polyaddition gave the corresponding linear polymer bearing phenolic moieties bridged by Mannich‐type linkage in the main chain. The linear polymer had a high glass transition temperature, which was comparable to that of the linear polybenzoxazine synthesized by the ring‐opening polymerization of a monofunctional N‐n‐propyl benzoxazine. The employment of a bifunctional N‐allyl benzoxazine in the polyaddition system resulted in the formation of the corresponding polymer with allyl pendants, which exhibited improved heat resistance due to its thermally induced crosslinking reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3867–3872