A Ga‐MIL‐53‐type Framework based on 1,4‐Phenylenediacetate Showing Subtle Flexibility

The new MOF Ga‐MIL‐53‐PDA [Ga(OH)(O₂C‐C₈H₈‐CO₂)] · H₂O ( 1 ) was synthesized by a hydrothermal reaction of gallium nitrate, 1,4‐phenylenediacetic acid (H₂PDA) and sodium hydroxide at 100 °C for 24 h. The product is a structural analogue of the archetypical MIL‐53 framework. Its crystal structure was determined by Rietveld refinement of powder X‐ray diffraction (PXRD) data. Furthermore 1,4‐phenylenedipropionic acid (H₂PDP) was employed for further synthesis, which resulted in the dense layered coordination polymers [Ga₂(OH)₄(O₂C‐C₁₀H₁₂‐CO₂)] ( 2 ) and [Ga(OH)(O₂C‐C₁₀H₁₂‐CO₂)] ( 3 ), for which accurate structural models could be established. All compounds were fully characterized and tested regarding potential breathing behavior. Most remarkably, Ga‐MIL‐53‐PDA showed a subtle flexibility upon de/‐rehydration also confirming its porosity, but no drastic structural changes were observed.     

Microporous 3D aluminum MOF doped into chitosan‐based mixed matrix membranes for ethanol/water separation

An aluminum metal–organic framework (Al‐MOF), [Al(OH)(BPDC)] (DUT‐5; BPDC = Biphenyl‐4,4′‐dicarboxylate), was synthesized using solvothermal reactions. The high surface area and micropores (approximately 1.2 nm) of DUT‐5 were characterized using N₂ gas sorption measurements. The thermal stability of DUT‐5 and its phase purity were also investigated. The different amounts of DUT‐5 (0.1, 0.15, and 0.2 wt%) were successfully incorporated into the chitosan (CS) polymer to prepare a mixed matrix membrane (MMM) for the pervaporation of water/ethanol at 25°C. In particular, when 0.15 wt% of DUT‐5 was loaded, the DUT‐5@CS MMMs displayed excellent permeability and selectivity in ethanol/water separation. The results indicated that compared with pristine chitosan membranes, the flux of DUT‐5@CS membranes with 0.15 wt% loading significantly increased from 315 to 378 (g/m² h^?1) and the separation factor from 347 to 3,429. These promising results of the microporous Al‐MOF doped into chitosan MMMs reveal its good application potential for the bio‐ethanol separation processes.     

A Comparative Study on the Luminescence of the Cd2+ and Mn2+ Coordination Polymers Based on the Same Mixed Ligands

Presented here is the solvothermal preparation of two luminescent coordination polymers (L‐CPs) based on the same mixed ligands, namely [Cd₂(1,4‐NDC)₂(dppe)] ( 1 ) and [Mn₃(OH)₂(1,4‐NDC)₂(dppe)(H₂O)] ( 2 ) (1,4‐NDCH₂=1,4‐naphthalene dicarboxylic acid, dppe=1,3‐di(4‐pyridyl)propane). Both the title compounds feature a neutral three‐dimensional (3D) network. Photoluminescence (PL) studies indicated that the compound 1 based on d¹⁰ Cd²⁺ exhibited dual emissions with tunable intensities that could result in direct white‐light emission based on the intraligand charge transfer (LLCT); while the compound 2 showed a single band of yellow emission based on the charge transfer between the ligands and the metal ion (LMCT), due to the partially filled d‐orbital of Mn²⁺ ion. The temperature‐dependent powder X‐ray diffraction patterns (PXRD) and PL spectra were further measured to identify their thermal stabilities. This work may provide a certain guiding significance for exploiting L‐CPs based on different metal ions.     

A Co‐MOF with a (4,4)‐connected binodal two‐dimensional topology: synthesis,structure and photocatalytic properties

The Co‐MOF poly[[diaqua{μ₄‐1,1,2,2‐tetrakis[4‐(1H‐1,2,4‐triazol‐1‐yl)phenyl]ethylene‐κ⁴N:N′:N′′:N′′′}cobalt(II)] benzene‐1,4‐dicarboxylic acid benzene‐1,4‐dicarboxylate], {[Co(C₃₄H₂₄N₁₂)(H₂O)₂](C₈H₄O₄)·C₈H₆O₄}_n or {[Co(ttpe)(H₂O)₂](bdc)·(1,4‐H₂bdc)}_n, (I), was synthesized by the hydrothermal method using 1,1,2,2‐tetrakis[4‐(1H‐1,2,4‐triazol‐1‐yl)phenyl]ethylene (ttpe), benzene‐1,4‐dicarboxylic acid (1,4‐H₂bdc) and Co(NO₃)₂·6H₂O, and characterized by single‐crystal X‐ray diffraction, IR spectroscopy, powder X‐ray diffraction (PXRD), luminescence, optical band gap and valence band X‐ray photoelectron spectroscopy (VB XPS). Co‐MOF (I) shows a (4,4)‐connected binodal two‐dimensional topology with a point symbol of {4⁴·6²}{4⁴·6²}. The two‐dimensional networks capture free neutral 1,4‐H₂bdc molecules and bdc^2? anions, and construct a three‐dimensional supramolecular architecture via hydrogen‐bond interactions. MOF (I) is a good photocatalyst for the degradation of methylene blue and rhodamine B under visible‐light irradiation and can be reused at least five times.     

Water‐Stable Coordination Polymers as Dual Fluorescent Sensors for Highly Oxidizing Anions Cr2O72− and MnO4−

Due to their striking optical properties, luminescent coordination polymers as sensors for the detection of hazardous species have drawn interest of researchers in consideration of the control of environmental pollution. In this work, the organic ligand 2‐(4‐((E)‐2‐(pyridine‐2‐yl)vinyl)styryl)pyridine (2‐bpeb), which possesses a large π‐conjugated system, was employed to react with d¹⁰ metal ions to obtain novel luminescent coordination polymers. Three complexes [Cd(2‐bpeb)_0.5(CNA)(H₂O)] ( CP1 ), [Cd(2‐bpeb)_0.5(NDC)] ( CP2 ) and [Zn(2‐bpeb)(BDC)] ( CP3 ) were synthesized successfully by introducing carboxylic acids of 4‐carboxycinnamic acid (H₂CNA), 2,6‐naphthalene dicarboxylic acid (H₂NDC) and 1,4‐benzenedicarboxylic acid (H₂BDC) as auxiliary ligands. Because of the existence of the large π‐conjugated system and d¹⁰ metal ions, all of these coordination polymers exhibit striking fluorescence properties. Impressively, all of them can function as sensors for the detection of highly oxidizing anions MnO₄^? and Cr₂O₇^2?, with an increased sensitivity for MnO₄^?.     

Responses of Metalloporphyrin‐Based Ion‐Selective Electrodes to pH

The ISEs based on [M(tpp)Cl] (M: Al, Ga, In, Mn, Fe; H₂tpp: tetraphenylporphin) had pH responses across their respective pH ranges, which had some correlation with the pH ranges of the two‐phase hydrolysis. Such pH responses are ascribed to the phase boundary potentials relating to the acid‐base pairs of [M(tpp)(H₂O)]⁺ and [M(tpp)(OH)] and/or [M₂(tpp)₂O]. The potential responses of the In and Fe complexes had the upper limitation to pH of 90 % hydrolysis, whereas those of the Al and Ga complexes had the extension to at least pH 12, indicating stable existence of [M(tpp)(H₂O)]⁺ even in contact with strongly alkaline solutions.     

Solvent‐Vapor‐Induced Reversible Single‐Crystal‐to‐Single‐Crystal Transformation of a Triphosphaazatriangulene‐Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha‐Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π‐conjugated framework, which enables the stimuli‐responsive reversible transformation of [Cu(HL)(DMSO)?(MeOH)]_n, a 3D‐MOF that exhibits reversible sorption characteristics, into (H₃L?0.5 [Cu₂(OH)₄?6 H₂O] ?4 H₂O), a 1D‐columnar assembled proton‐conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10^?3 S cm^?1 at 95 % relative humidity and 60 °C.     

Kinetic Studies Prove High Catalytic Activity of a Diene–Rhodium Complex in 1,4‐Addition of Phenylboronic Acid to α,β‐Unsaturated Ketones

In the 1,4‐addition of phenylboronic acid to α,β‐unsaturated ketones, [Rh(OH)(cod)]₂ has a much higher catalytic activity than [Rh(OH)(binap)]₂ (cod=1,5‐cyclooctadiene, binap=2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthyl). Kinetic studies revealed that the rate‐determining transmetalation step in the catalytic cycle has a large rate constant when [Rh(OH)(cod)]₂ is used.     

The Syntheses,Structures, and Magnetic Properties of Four 2D Lanthanide(III)‐naphthalenedicarboxylic Complexes

Four Ln‐NDC coordination polymers [Ln(NDC)(HNDC)(H₂O)] (Ln = La ( 1 ), Pr ( 2 ), Nd ( 3 ), Sm ( 4 ), H₂NDC = 1,4‐naphthalenedicarboxylic acid) were hydrothermally synthesized and structurally characterized by elemental analyses, IR spectroscopy, and single‐crystal X‐ray diffraction. Compounds 1 – 4 are isomorphous, and their structures display a layer constructed from a Ln‐organic chain and NDC^2– ligand, in which the H₂NDC ligands adopt two different acidity‐dependent types and coordination modes: HNDC^1– with μ‐η¹:η¹ and NDC^2– with μ‐η¹:η²:η¹:η². The 3D supramolecular networks of 1 – 4 are mainly controlled by hydrogen bonds interactions. The magnetic susceptibilities of complexes 2 – 4 reveal overall antiferromagnetic interactions between the Ln^III ions. In addition, thermogravimetric analysis of compound 2 is described.     

Syntheses,Structures, Electrochemistry,and Electrocatalysis of Three Copper(II) Coordination Polymers constructed from 5‐[4‐(1H‐Imidazol‐1‐yl)phenyl]‐1H‐tetrazole

Three coordination polymers (CPs) based on the 5‐[4‐(1H‐imidazol‐1‐yl)phenyl]‐1H‐tetrazole ( HL ) ligand, namely, [Cu(μ₂‐ L )(μ₄‐pbda)(H₂O)] ( 1 ), [Cu₂(μ‐Hbtc)(H₂btc)(μ₃‐OH)(μ₄‐ HL )] ( 2 ) and [Cu₅(μ₃‐ L )(μ₄‐ L )(μ₃‐ip)(μ₃‐OH)(H₂O)₂] · 2H₂O ( 3 ) (H₂pbda = 1,4‐benzenedicarboxylic acid, H₃btc = 1,3,5‐benzenetricarboxylic acid, H₂ip = isophthalic acid) were hydrothermally synthesized and structurally characterized. Complex 1 represents “weave”‐type 2D layers consisting of wave‐like 1D chains and 1D straight chains, which are further connected by hydrogen bonds to form a 3D supramolecular structure. Complex 2 exhibits a uninodal (4)‐connected 2D layer with a point symbol of {4⁴ · 6²}, in which the L ligand can be described as μ₅‐bridging and the H₂btc^– ions display multiple kinds of coordination modes to connect Cu^II ions into 1D “H”‐type Cu‐H₂btc chains. In complex 3 , 2D Cu‐ L layers with two kinds of grids and 1D “stair”‐type Cu‐ip chains link each other to construct a 3D {4¹² · 6³} framework, which contains the pentanuclear subunits. Deprotonated degree and coordination modes of carboxylate ligands may consequentially influence the coordination patterns of main ligands and the final structures of complexes 1 – 3 . Furthermore, electrochemical behaviors and electrocatalytic activities of the title complexes were analyzed at room temperature, suggesting practical applications in areas of electrocatalytic reduction toward nitrite and hydrogen dioxide in aqueous solutions, respectively.     

Influence of the Metal Ions on the Allylic Rearrangement Reaction of 3,4,5,6‐Tetrahydrophthalic Anhydride

To further investigate the influence of metal ions on the allylic rearrangement of 3,4,5,6‐tetrahydrophthalic anhydride during the hydrothermal reaction, metal ions such as manganese(II), zinc(II) and cadmium(II) have been employed in the synthesis, which leads to the formation of three new lamellar coordination polymers, [Mn^II₅(µ₃‐OH)₃(1‐chec)(1,2‐chedc)(2,3‐chedc)₂(H₂O)] ( 3Mn) , [Zn^II₅(µ₃‐OH)₃(1‐chec)(1,2‐chedc)(2,3‐chedc)₂(H₂O)] ( 4Zn ), and [Cd^II₃(µ₃‐OH)₂(1,2‐chedc)₂] ( 5Cd) (1‐chec=cyclohexene‐1‐carboxylate, 1,2‐chedc=cyclohexene‐1,2‐dicarboxylate, 2,3‐chedc=cyclohexene‐1,2‐dicarboxylate). Interestingly, the allylic rearrangement reaction is metal‐dependent, which occurs only in 3Mn and 4Zn , resulting in the formation of one chiral carbon atom of the corresponding dicarboxylate ligands in both compounds. In addition, the magnetic property of compound 3Mn was studied, which revealed strong antiferromagnetic interactions between the metal centers.     

Dual‐Emission Luminescence of Magnesium Coordination Polymers Based on Mixed Organic Ligands

Presented herein are two luminescent magnesium coordination polymers (Mg‐CPs), namely [Mg₂(H₂O)₂(2‐NDC)₄(1,10‐phen)₂] ( 1 ) and [Mg₂(H₂O)(1,4‐NDC)₂(1,10‐phen)] ( 2 ), in which 2‐NDCH=2‐naphthalenecarboxylic acid, 1,4‐NDCH₂=1,4‐naphthalene dicarboxylic acid, and 1,10‐phen=1,10‐phenanthroline. Based on the mixed ligands, the title compounds exhibit linker‐based photoluminescence (PL) properties thanks to the unique configuration of the Mg²⁺ ions. The two compounds show interesting dual emission on excitation of the different luminophores of the mixed linkers. In particular, the emissions of compound 2 could be tuned from green to yellow simply by varying the excitation energies. Furthermore, 2 could be excited by using a commercial λ=450 nm blue LED chip to generate white‐light emission, which allows the fabrication of a white‐light‐emitting diode (WLED) with 20 lm W^?1 luminous efficacy. This work may provide a new method for designing tunable PL CPs by using the low‐cost and abundant magnesium ion.     

A EuIII‐MOF with Bis(2‐carboxyethyl)isocyanurate for Luminescence Sensing of Fe3+ and SCN– Ions

The water‐stable 3D lanthanide‐organic framework (Ln‐MOF) {[Eu(bci)(H₂O)] · 2H₂O}_n ( 1 ) [H₂bci = bis(2‐carboxyethyl)isocyanurate] was synthesized under hydrothermal conditions. Compound 1 ‐ Eu exhibits a 3D open‐framework connected by Eu–(μ‐O)₂–Eu chains and bci ligands. Meanwhile, 1 ‐ Eu exhibits highly efficient luminescent sensing for environmentally relevant Fe³⁺ and SCN^– ions through luminescence quenching. These results indicated that it could be utilized as a multi‐responsive luminescence sensor.     

Tuning Cadmium Coordination Architectures by Phenylenediacetate Position Isomers and 1,4‐Bis(benzimidazol‐1‐ylmethyl)benzene

Three position isomers 1,2‐, 1,3‐, 1,4‐phenylenediacetate and 1,4‐bis(benzimidazol‐1‐ylmethyl)benzene (bmb) were used to assembly cadmium(II) coordination polymers, [Cd(bmb)(1,2‐phda)]_n ( 1 ), {Cd(bmb)(1,3‐phda)] · 0.5(bmb)}_n ( 2 ), and [Cd(bmb)_0.5(1,4‐phda)]_n ( 3 ), which are characterized by elemental analyses, infrared spectra (IR), thermogravimetric analysis (TGA) and single‐crystal X‐ray diffraction. Single crystal structure analysis shows that complex 1 is a two‐dimensional wave‐like layer network. Complex 2 features a (3,5)‐connected three‐dimensional frameworks with (4².6)(4².6⁵.8³) topology, whereas complex 3 shows a (4,4)‐connected three‐dimensional (4.6⁴.7)(4².6².8²) topology. The structural versatility reveals that a significant structure‐directing effect of the position of the acetate groups during self‐assembly of these coordination polymers. Moreover, luminescent properties and thermal stabilities of three complexes were discussed in detail.     

A 3D Metal‐organic Framework Containing [Cd(3‐CPOA)]n (3‐CPOA2– = 3‐Carboxyphenoxyacetato Dianion) Expanded by 4,4′‐Bipyridine

The hydrothermal reaction of Cd(NO₃) · 4H₂O with 4,4′‐bipyridine (bipy) and 3‐carboxyphenoxyacetatic acid (3‐H₂CPOA) afforded a 3D metal‐organic framework (MOF) [Cd(3‐CPOA)(bipy)]_n · 3.5nH₂O, which was characterized by elemental analyses, IR spectroscopy, thermogravimetric analyses, and X‐ray diffraction. The single‐crystal structural analysis revealed that it has a Cds‐type topological network with 1D channels that contain encapsulated water molecular tapes.     

Syntheses,Structures, and Magnetic Properties of Two Cobalt(II) Metal‐Organic Frameworks Based on Y‐shaped 3,5,4′‐Azobenzenetricarboxylic Acid and Different N‐donor Ligands

Two metal‐organic frameworks, [Co₂(ABTC)(bimh)(OH)] · 2H₂O ( 1 ) and [Co₃(ABTC)₂(dimb)₄]_n ( 2 ) [H₃ABTC = 3,4′,5‐azobenzenetricarboxylic acid, bimh = 1,1′‐(1,4‐hexanediy)bis(imidazole), dimb = 1,4‐bis(1H‐imidazol‐1‐yl)benzene], were prepared under solvothermal conditions and structurally characterized. Complex 1 demonstrates a complicated 3D (3,8)‐connected tfz‐d net with (4³)₂(4⁶.6¹⁷.8⁵) topology. The framework of 2 can be classified as a rare 3D (3,6,6)‐connected net with the Schäfli symbol of (4.6²)₂(4².6¹⁰.8³)(4⁴.6¹⁰.8), and exhibits an intriguing self‐penetrating motif. Meanwhile, the thermal stabilities and magnetic properties for 1 and 2 were also probed.     

Ligand-controlled assembly of Cd(II) coordination polymers based on mixed ligands of naphthalene-dicarboxylate and dipyrido[3,2-d:2′,3′-f]quinoxaline: From 0D+1D cocrystal, 2D rectangular network (4,4), to 3D PtS-type architecture

Three novel Cd(II) coordination polymers, namely, [Cd(Dpq)(1,8-NDC)(H₂O)₂][Cd(Dpq)(1,8-NDC)]·2H₂O (1), [Cd(Dpq)(1,4-NDC)(H₂O)] (2), and [Cd(Dpq)(2,6-NDC)] (3) have been obtained from hydrothermal reactions of cadmium(II) nitrate with the mixed ligands dipyrido [3,2-d:2′,3′-f]quinoxaline (Dpq) and three structurally related naphthalene-dicarboxylate ligands [1,8-naphthalene-dicarboxylic acid (1,8-H₂NDC), 1,4-naphthalene-dicarboxylic acid (1,4-H₂NDC), and 2,6-naphthalene-dicarboxylic acid (2,6-H₂NDC)]. Single-crystal X-ray diffraction analysis reveals that the three polymers exhibit novel structures due to different naphthalene-dicarboxylic acid. Compound 1 is a novel cocrystal of left- and right-handed helical chains and binuclear complexes and ultimately packed into a 3D supramolecular structure through hydrogen bonds and π-π stacking interactions. Compound 2 shows a 2D rectangular network (4,4) bridged by 1,4-NDC with two kinds of coordination modes and ultimately packed into a 3D supramolecular structure through inter-layer π-π stacking interactions. Compound 3 is a new 3D coordination polymer with distorted PtS-type network. In addition, the title compounds exhibit blue/green emission in solid state at room temperature.     

A CdII‐Based Metal‐Organic Framework with pcu Topology as Turn‐On Fluorescent Sensor for Al3+

A new metal‐organic framework (MOF) {[Cd₂(bbib)₂(ndc)₂]?2DMF}_n ( JXUST‐1 ) (bbib=1,3‐bis(benzimidazolyl)benzene, H₂ndc=1,4‐naphthalenedicarboxylic acid, DMF=N,N‐dimethylformamide) has been solvothermally synthesized and characterized by single‐crystal X‐ray diffraction, PXRD, TGA, IR and elemental analysis. JXUST‐1 exhibits a three‐dimensional 6‐connected pcu topology with a Schläfli symbol {4¹².6³} constructed by [Cd₂(CO₂)₃] secondary building units. Fluorescence studies show that this MOF can sensitively and selectively recognize Al³⁺ via a fluorescence enhancement effect, and the detection limit is 0.048 ppm. Furthermore, JXUST‐1 displays relatively good thermal and chemical stabilities as well as reusability. All these results suggest JXUST‐1 to be a highly selective and recyclable luminescent sensing material for the detection of Al³⁺.     

Hydrothermal Synthesis of Five New Coordination Polymers Based on Benzophenone‐2, 4′‐dicarboxylic Acid and N‐Donor Spacers

Five new coordination polymers, namely, [Ni₂(L)₂(4, 4′‐bipy)₃)] · H₂O]_n ( 1 ), [Ni₂(L)₂(O) (bpp)₂]_n ( 2 ), [Zn(L)(bib)_0.5]_n ( 3 ), [Zn(L)(PyBIm)]_n ( 4 ), and [Zn₃(L)₂(OH)(im)]_n ( 5 ) [H₂L = benzophenone‐2, 4′‐dicarboxylic acid, 4, 4′‐bipy = 4, 4′‐bipyridine, bpp = 1, 3‐bis(4‐pyridyl)propane, PyBIm = 2‐(4‐pyridyl)benzimidazole, and im = imidazole] were synthesized under hydrothermal conditions. Structure determination revealed that compound 1 is a 3D network and exhibits a 4‐connected metal‐organic framework with (4².6³.8) topology, whereas compounds 2 , 3 , 4 , and 5 are two‐dimensional layer structures. In compounds 2 – 4 , dinuclear metal clusters are formed through carboxylic groups. In compound 5 , trinuclear metal clusters are formed through μ₃‐OH and carboxylic groups. The carboxylic groups exhibit three coordination modes in compounds 1 – 5 : monodentately, bidentate‐chelating, and bis‐monodentately. Furthermore, the luminescent properties for compounds 3 , 4 , and 5 were investigated.     

Syntheses,Structures, and Luminescent Properties of d10 Coordination Polymers with 2‐(4‐Carboxyphenyl)‐imidazo[4, 5‐f]‐1, 10‐phenanthroline and 1, 3‐Benzenedicarboxylate Derivatives

Four Zn^II/Cd^II coordination polymers (CPs) based on 2‐(4‐carboxy‐phenyl)imidazo[4, 5‐f]‐1, 10‐phenanthroline (HNCP) and different derivatives of 5‐R‐1, 3‐benzenedicarboxylate (5‐R‐1, 3‐BDC) (R = NO₂, H, OH), [Zn(HNCP)(5‐NO₂‐1, 3‐BDC)]_n ( 1 ), [Cd(HNCP)(5‐NO₂‐1, 3‐BDC)]_n ( 2 ), [Zn(HNCP)(1, 3‐BDC)(H₂O)₂]_n ( 3 ), and {[Zn(HNCP)(5‐OH‐1, 3‐BDC)(H₂O) · H₂O}_n ( 4 ) were synthesized under hydrothermal conditions. Compounds 1 – 4 were determined by elemental analyses, IR spectroscopy, and single‐crystal and powder X‐ray diffraction. Compounds 1 and 2 are isomorphous, presenting a 4‐connected uninodal (4, 4)‐sql 2D framework with threefold interpenetration, which are further extended into the three‐dimensional (3D) supramolecular architecture through π ··· π stacking interactions between the aryl rings of 5‐NO₂‐1, 3‐BDC. Compared to compound 1 , 3 is obtained by using different reaction temperatures and metal‐ligand ratios, generating a 3D framework with –ABAB– fashion via π ··· π stacking interactions. Compound 4 is a 1D chain, which is further extended into a 3D supramolecular net by hydrogen bonds and π ··· π stacking interactions. The thermogravimetric and fluorescence properties of 1 – 4 were also explored.