Synthesis and Characterization of Water‐Soluble Conjugated Glycopolymer for Fluorescent Sensing of Concanavalin A

A neutral polyfluorene derivative that contains 20 mol % 2,1,3‐benzothiadiazole (BT) is synthesized by Suzuki cross‐coupling polymerization. A cationic conjugated polymer A and an α‐mannose‐bearing polymer B are subsequently obtained through different post‐polymerization methods. As a result of the charged pendant groups or sugar‐bearing groups attached to the polymer side chains, both A and B show good water‐solubility. The titration of Concanavalin A (Con A) into polymer aqueous solution leads to different fluorescent responses for polymers A and B . Polymer A does not show any obvious fluorescence change upon interaction with Con A, whereas polymer B shows fluorescence increase in BT emission intensity when Con A is added. This is because of the specific interaction between α‐mannose and Con A, which induces polymer aggregation, and then facilitates energy transfer from the phenylene–fluorene segments to the BT units. A practical calibration curve ranging from 1 nM to 250 nM is obtained by correlating the changes in BT emission intensity with Con A concentration. The advantage of polymer B ‐based Con A macromolecular probe is that it shows signal increase upon Con A recognition, which is significantly different from other conjugated polymer‐based fluorescence quenching assays.     

The effect of receptor clustering on vesicle-vesicle adhesion

As part of our studies into how the localization of cell adhesion molecules into lipid rafts may affect cell adhesion, we developed Cu(1), a synthetic copper(iminodiacetate)-capped receptor able to phase separate from fluid phospholipid bilayers. The extent to which Cu(1) clustered into adhesive patches on the surface of vesicles could be controlled by changing vesicle composition. Extensive receptor phase separation significantly enhanced vesicle-vesicle adhesion; only vesicles with adhesive patches (blue fluorescence) adhered to their conjugate histidine-coated vesicles (red fluorescence) to form large vesicle aggregates (shown).     

Bio‐Inspired Stable Lithium‐Metal Anodes by Co‐depositing Lithium with a 2D Vermiculite Shuttle

Progress in lithium‐metal batteries is severely hindered by lithium dendrite growth. Lithium is soft with a mechanical modulus as low as that of polymers. Herein we suppress lithium dendrites by forming soft–hard organic–inorganic lamella reminiscent of the natural sea‐shell material nacres. We use lithium as the soft segment and colloidal vermiculite sheets as the hard inorganic constituent. The vermiculite sheets are highly negatively charged so can absorb Li⁺ then be co‐deposited with lithium, flattening the lithium growth which remains dendrite‐free over hundreds of cycles. After Li⁺ ions absorbed on the vermiculite are transferred to the lithium substrate, the vermiculite sheets become negative charged again and move away from the substrate along the electric field, allowing them to absorb new Li⁺ and shuttling to and from the substrate. Long term cycling of full cells using the nacre‐mimetic lithium‐metal anodes is also demonstrated.     

Ionic Self‐Assembled Platform of Perylenediimide–Sodium Dodecylsulfate for Detection of Spermine in Clinical Samples

The detection and quantification of spermine in clinical practice is important for early diagnosis of many diseases. Chromatographic and immunoassay‐based methods are commonly used. However, a fluorescence‐based assay could provide real‐time detection. Herein, the synthesis and aggregation properties of a dicationic perylene probe (N ¹‐dodecyl‐N ³‐(4‐phenyl)benzimidazolium‐functionalized perylenediimide ( DAB‐PDI )) used to develop a fluorescent “turn‐on” ensemble for the detection of spermine are discussed. The fluorescence of DAB‐PDI (10 μm , Φ =0.55) is efficiently quenched by negatively charged sodium dodecylsulfate (SDS) through the formation of ionic self‐assembled aggregates (charge ratio of negative (N) in SDS to positive (P) in DAB‐PDI (N/P)=9). This negatively charged ionic self‐assembly between DAB‐PDI and SDS has been characterized by using photophysical, microscopic, dynamic light scattering, isothermal titration calorimetry, and HRMS techniques. The addition of spermine to this ensemble solution results in the breakdown of the DAB‐PDI –SDS ensemble owing to strong binding of spermine with SDS and, as a result, the fluorescence of DAB‐PDI is recovered. This ensemble exhibits high sensitivity and selectivity for spermine detection in water, urine, and blood serum. The lowest limit of detection is 27.5 nm , which is at least about 36 times lower than that required for early diagnosis of cancer (1 to 10 μm for urinary spermine).     

Spatially ordered surfactant assemblies in the gas phase: negatively charged bis(2‐ethylhexyl)sulfosuccinate‐alkaline metal ion aggregates

The formation and structural features of negatively charged aggregates of sodium bis(2‐ethylhexyl)sulfosuccinate (AOTNa) surfactant molecules in the gas phase have been investigated by electrospray ionization mass spectrometry (ESI‐MS) and density functional theory calculations. Mainly driven by the interactions of alkali metal ions both with the oxygen atoms of the sulfonate group and with the succinate moiety of the AOT^? anion, spatially ordered supramolecular assemblies, characterized by an internal core composed of surfactant counterions and hydrophilic head groups surrounded by the surfactant alkyl chains pointing outwards, are formed. Calculations have shown that surfactant self‐organization in the gas phase is energetically favoured, the energy of formation of negatively charged aggregates from isolated AOTNa and AOT^? being linearly related to the aggregation number. Information on the chelating properties of AOTNa towards clusters of inorganic salts was achieved by infusion of solutions at various AOTNa/metal salt (NaCl, NaBr, NaI, LiI, KCl, CsI, RbI) ratios in the ESI source of a mass spectrometer. A wide variety of negatively charged AOT‐metal aggregates, some of them also incorporating halide (X^?) ions, has been observed. Calculations have shown that the capture of a halide anion to give the AOTMX^? species is favoured but the energetics of the process depends on the alkali metal and halide types. The use of energy‐resolved mass spectrometry has allowed us to evaluate the stability of different complexes and to evaluate the role played by the metal ion. Overall, the present investigation supports the idea that, in the gas phase, mainly driven by electrostatic interactions, surfactant molecules are present as molecular aggregates characterized by a reverse micelle‐like organization with an internal core formed by the surfactant counterions and head groups surrounded by the surfactant alkyl chains. These peculiar aggregates are able to incorporate ionic clusters in their hydrophilic core. Copyright © 2009 John Wiley & Sons, Ltd.     

Homogeneous DNA Detection Based on Fluorescence Quenching by Nanoparticles in Single-step Format :Target-Induced Configuration Transform

A new strategy for homogeneous detection of DNA hybridization in single-step format was developed based on fluorescence quenching by gold nanoparticles. The gold nanoparticle is functionalized with 5’-thiolated 48-base oligonucleotide (probe sequence), whose 3’-terminus is labeled with fluorescein (FAM), a negatively charged fluorescence dye. The oligonucleotide adopts an extended configuration due to the electrostatic repulsion between negatively charged gold nanoparticle and the FAM-attached probe sequence. After addition of the complementary target sequence, specific DNA hybridization induces a conformation change of the probe from an extended structure to an arch-like configuration, which brings the fluorophore and the gold nanoparticle in close proximity. The fluorescence is efficiently quenched by gold nanoparticles. The fluorescence quenching efficiency is related to the target concentration, which allows the quantitative detection for target sequence in a sample. A linear detection range from 1.6 to 209.4 nmol/L was obtained under the optimized experimental conditions with a detection limit of 0.1 nmol/L. In the assay system, the gold nanoparticles act as both nanoscaffolds and nanoquenchers. Furthermore, the proposed strategy, in which only two DNA sequences are involved, is not only different from the traditional molecular beacons or reverse molecular beacons but also different from the commonly used sandwich hybridization methods. In addition, the DNA hybridization detection was achieved in homogenous solution in a single-step format, which allows real-time detection and quantification with other advantages such as easy operation and elimination of washing steps.     

Silica nanorings on the surfaces of layered silicate

A simple approach to the synthesis of clay-silica nanocomposites is presented. Silica nanorings on the edges of clay sheets were synthesized by using a modified St?ber method. Transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy, and fluorescence spectroscopy were employed to characterize the prepared nanocomposites. TEM results show that the average size of the nanorings increases with the growth of silica. XRD results indicate that the layered structures of clay can be found in the nanocomposite and the growth of silica nanorings expands the d spacing of clay platelets. The mechanism of the formation of the nanorings is discussed. The preparation of polystyrene (PS) brushes on the surfaces of silica nanorings by atom-transfer radical polymerization is also reported. The polymer nanocomposite with negatively charged clay surfaces and hydrophobic polymer brushes on the silica nanorings can be used in Pickering emulsions, and PS colloidal particles with clay-silica on the surfaces were prepared.     

A Polymer/Peptide Complex‐Based Sensor Array That Discriminates Bacteria in Urine

A negatively charged poly(para ‐phenyleneethynylene) (PPE) forms electrostatic complexes with four positively charged antimicrobial peptides (AMP). The AMPs partially quench the fluorescence of the PPE and discriminate fourteen different bacteria in water and in human urine by pattern‐based fluorescence recognition; the AMP‐PPE complexes bind differentially to the components of bacterial surfaces. The bacterial species and strains form clusters according to staining properties (Gram‐positive and Gram‐negative) or genetic similarity (genus, species, and strain). The identification and data treatment is performed by pattern evaluation with linear discriminant analysis (LDA) of the collected fluorescence intensity data.     

Polymer‐Templated Perylene‐Probe Noncovalent Self‐Assembly: A New Strategy for Label‐Free Ultrasensitive Fluorescence Turn‐On Biosensing

A new label‐free fluorescence turn‐on strategy for highly sensitive biosensing has been developed. A negatively charged perylene probe was synthesized. Polycations could induce aggregation of the perylene probe through noncovalent interactions and the fluorescence of the probe’s monomer was efficiently quenched. Upon addition of a single‐stranded nucleic acid, competitive binding of the negatively charged nucleic acid (a polyanion) to the cationic polymer resulted in the release of a monomer and thus a turn‐on fluorescence signal was detected. Without the use of any amplification techniques, a detection limit of 2 pM DNA was obtained. Based on these results, an assay strategy for the highly sensitive detection of alkaline phosphatase (ALP) activity has been demonstrated. λ Exonuclease (λ exo) could degrade 5′‐phosphorylated single‐stranded DNA. However, when the DNA sample was treated with ALP, the phosphate functional group was removed by ALP and it could no longer be degraded by λ exo. Binding of the DNA to the perylene probe–polycation complex resulted in a turn‐on fluorescence signal, which could be used for sensing of ALP. The method is highly sensitive, a limit of detection as low as 0.02 mU mL^?1 ALP was obtained. Our method is simple, convenient, highly sensitive, and inexpensive.     

An Enzyme‐Responsive “Turn‐on” Fluorescence Polymeric Superamphiphile as a Potential Visualizable Phosphate Prodrug Delivery Vehicle

The development of inexpensive and highly efficient enzyme‐responsive polymers has significantly contributed to targeted drug delivery systems. Here, a superamphiphile with a capability of fluorescent dissociation sensing is designed. It is constructed with negatively charged adenosine 5′‐triphosphate (ATP) and negatively charged fluorescein diphosphate (FDP), which are used as fluorescence detection, and a cationic diblock copolymer methoxy‐poly(ethylene glycol)₁₁₃‐b‐poly(2‐dimethyl‐aminoethyl methacrylate)₇₀. Upon addition of calf intestinal alkaline phosphatase, the superamphiphile disintegrates, presumably due to the enzymatic hydrolysis of ATP. This process is accompanied by an increase in the fluorescence emission intensity of fluorescein owing to the hydrolysis of FDP. The in vitro application of the superamphiphile is also proven. Thus, the “turn‐on” fluorescence of the superamphiphile serves as a real‐time module for detection of the disintegration of superamphiphile.     

Redox-gated potential micellar carriers based on electrostatic assembly of soft coordination suprapolymers

We report in this paper the release and uptake of charged payloads in redox responsive electrostatic micellar systems composed of negatively charged soft iron coordination suprapolymers and positively charged block copolymers. This micellar system was reported in our previous work (Yan, Y.; Lan, Y. R.; de Keizer, A.; Drechsler, M.; Van As, H.; Stuart, M. A. C.; Besseling, N. A. M. Redox responsive molecular assemblies based on metallic coordination polymers. Soft Matter, 2010, 6, 3244-3248), where we proposed that the system can be used as a redox-triggered release and uptake system. In this paper, we successfully selected a negatively charged fluorescent dye, eosin B, as a model cargo to track the release and upload process. Upon being compacted in the mixed micelles of coordination polymers and diblock copolymers, the fluorescence of eosin B was effectively quenched. Once reduction was conducted, excess negative charges were introduced to the mixed micelles so that the negatively charged eosin B was expelled out which was accompanied by the recovery of the fluorescence. The free negatively charged eosin B was able to be taken up by the Fe(II) micelles again if oxidation of Fe(II) was carried out since excess positive charges were produced. Beside eosin B, other charged species, such as various charged macromolecules, were tested to be capable of uptake and release by this micellar system. We suppose this system can be potentially used as a redox-gated micellar carrier for uptake and release of charged cargos.     

Synthesis and surfactochromicity of 1,4‐diketopyrrolo[3,4‐c]pyrrole(DPP)‐based anionic conjugated polyelectrolytes

Two novel anionic conjugated copolyelectrolytes PSDPPPV and PSDPPPE were synthesized via Heck/Sonogashira coupling reactions and characterized by FT‐IR, ¹H NMR, UV‐vis, and PL spectroscopy. The two polymers are respectively constituted of 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPV) and 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPE) with 1,4‐diketo‐2,5‐bis(4‐sulfonylbutyl)‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (SDPP) which is a novel water soluble diketopyrrolopyrrole derivative. PSDPPPV and PSDPPPE show broad absorption band in visible region and they exhibit strong fluorescence quenching in aqueous solution. The fluorescence of their aqueous solutions can be enhanced in the presence of cationic surfactant or polymer nonionic surfactant. Fluorescence enhancement by introduction of polyvinylpyrrolidone (PVP) shows linear response. This result provides a controllable method to increase fluorescence intensity of dipyrrolopyrrole‐based conjugate polyelectrolytes in aqueous phase. The optical properties suggested that PSDPPPV and PSDPPPE which are negatively charged conjugated polymers can assemble with positively charged photovoltaic materials to form ionic photoactive layer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 739–751     

Colloidal stability of dextran-modified latex particles toward adsorption of concanavalin A

The colloidal stability of the dextran-modified poly(methyl methacrylate) (PMMA) latex particles toward adsorption of a carbohydrate-binding protein, concanavalin A (Con A), is primarily controlled by the charge neutralization mechanism. Formation of a crosslinked network structure via the specific affinity interactions between the dimeric Con A molecules and the dextran molecules anchored onto different latex particles may also have an impact on the coagulation kinetics. Judging from the data of coagulation kinetics, the colloidal stability of the latex particles toward added Con A in the decreasing order is: latex particles without dextran modification>latex particles with a dextran content of 2.15%>latex particles with a dex-tran content of 1.24% based on total polymer weight (PMMA+grafted dextran). The coagulation mechanisms involved in the adsorption of Con A onto the latex particles have been proposed to explain these experimental data. Charge neutralization of the negatively charged latex particles by adsorption of the positively charged Con A is the predominant destabilization mechanism. The ratio of the number of dextran active sites to that of Con A molecules plays an important role in the formation of the crosslinked network structure. The electrolytes in water cause a reduction in the electrostatic repulsion force among the interactive latex particles, but this ionic strength effect is not significant in comparison with charge neutralization. Received: 22 October 1997 Accepted: 24 December 1997     

Interaction of Polymethine Dyes with Detonation Nanodiamonds

Among cationic, anionic, and merocyanine polymethine dyes, the binding to detonation nanodiamond (DND) colloid particles in hydrosol occurs only for negatively charged dye species. This, in view of the positive ζ-potential of the DND used in this study, suggests the predominance of electrostatic interactions over other intermolecular forces in such systems. Indeed, after decorating the merocyanine and the cationic dye by one and two negatively charged sulfopropyl groups, respectively, so that the net charge of their colored species becomes negative, the compounds also demonstrate affinity to the DND particles. In all cases, the binding of dyes to DND is accompanied by a decrease in fluorescence intensity and a bathochromic shift of their absorption and fluorescence bands. A quantitative study of the dyes adsorption on the DND nanoparticles as performed using the Küster-Freundlich and Langmuir equations reveals some peculiarities of their attaching to the DND aggregates and allows estimating the specific area of the DND particles at a concentration of 0.0212 wt/vol %.     

Controllable Assembly and Separation of Colloidal Nanoparticles through a One‐Tube Synthesis Based on Density Gradient Centrifugation

Self‐assembly of gold nanoparticles into one‐dimensional (1D) nanostructures with finite primary units was achieved by introducing a thin salt (NaCl) solution layer into density gradient before centrifugation. The electrostatic interactions between Au nanoparticles would be affected and cause 1D assembly upon passing through the salt layer. A negatively charged polymer such as poly(acrylic acid) was used as an encapsulation/stabilization layer to help the formation of 1D Au assemblies, which were subsequently sorted according to unit numbers at succeeding separation zones. A centrifugal field was introduced as the external field to overcome the random Brownian motion of NPs and benefit the assembly effect. Such a facile “one‐tube synthesis” approach couples assembly and separation in one centrifuge tube by centrifuging once. The method can be tuned by changing the concentration of interference salt layer, encapsulation layer, and centrifugation rate. Furthermore, positively charged fluorescent polymers such as perylenediimide‐poly(N,N‐diethylaminoethyl methacrylate) could encapsulate the assemblies to give tunable fluorescence properties.     

Synthesis,self‐assembly and recognition properties of biomimetic star‐shaped poly(ε‐caprolactone)‐b‐glycopolymer block copolymers

Biomimetic star‐shaped poly(ε‐caprolactone)‐b‐poly(gluconamidoethyl methacrylate) block copolymers (SPCL‐PGAMA) were synthesized from the atom transfer radical polymerization (ATRP) of unprotected GAMA glycomonomer using a tetra(2‐bromo‐2‐methylpropionyl)‐terminated star‐shaped poly(ε‐caprolactone) (SPCL‐Br) as a macroinitiator in NMP solution at room temperature. The block length of PGAMA glycopolymer within as‐synthesized SPCL‐PGAMA copolymers could be adjusted linearly by controlling the molar ratio of GAMA glycomonomer to SPCL‐Br macroinitiator, and the molecular weight distribution was reasonably narrow. The degree of crystallization of PCL block within copolymers decreased with the increasing block length ratio of outer PGAMA to inner PCL. Moreover, the self‐assembly properties of the SPCL‐PGAMA copolymers were investigated by NMR, UV‐vis, DLS, and TEM, respectively. The self‐assembled glucose‐installed aggregates changed from spherical micelles to worm‐like aggregates, then to vesicles with the decreasing weight fraction of hydrophilic PGAMA block. Furthermore, the biomolecular binding of SPCL‐PGAMA with Concanavalin A (Con A) was studied by means of UV‐vis, fluorescence spectroscopy, and DLS, which demonstrated that these SPCL‐PGAMA copolymers had specific recognition with Con A. Consequently, this will not only provide biomimetic star‐shaped SPCL‐PGAMA block copolymers for targeted drug delivery, but also improve the compatibility and drug release properties of PCL‐based biomaterials for hydrophilic peptide drugs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 817–829, 2008     

Polyelectrolyte‐Assisted Noncovalent Functionalization of Carbon Nanotubes with Ordered Self‐Assemblies of a Water‐Soluble Porphyrin

The self‐assembly and induced supramolecular chirality of meso‐tetrakis(4‐sulfonatophenyl)porphyrin (TSPP) on both single‐wall (SWCNT) and multiwall carbon nanotubes (MWCNT) are investigated. Under mild pH conditions (pH 3), TSPP forms aggregates when CNTs are dispersed in an aqueous solution containing positively charged polyelectrolytes such as poly‐L ‐lysine (PLL) or poly(allylamine hydrochloride) (PAH). Evidence for the geometry of the porphyrin aggregates is obtained from absorption spectra, whereby the fingerprints of J‐ and H‐aggregates are clearly seen only in the presence of smaller‐diameter nanotubes. J‐aggregates are better stabilized with PLL, whereas in the presence of PAH mainly H‐aggregates prevail. Excited‐state interactions within these nanohybrids are studied by steady‐state and time‐resolved fluorescence. The porphyrin emission intensity in the nanohybrid solution is significantly quenched compared to that of TSPP alone, and this implies strong electronic interaction between CNTs and porphyrin molecules. Fluorescence lifetime imaging microscopy (FLIM) further supports that porphyrin arrays are associated with the MWCNT sidewalls wrapped in PLL. In the case of the SWCNT hybrid, spherical structures associated with longer fluorescence lifetime appeared after one week, indicative of H‐aggregates of TSPP. The latter are the result of π–π stacking of porphyrin units on neighboring nanotubes facilitated by the strong tendency of these nanotubes to interact with each other. These results highlight the importance of optimum dimensions and surface‐area architectures of CNTs in the control/stability of the porphyrin aggregates with promising properties for light harvesting.     

Degrees of freedom effect on fragmentation in tandem mass spectrometry of singly charged supramolecular aggregates of sodium sulfonates

The characteristic collision energy (CCE) to obtain 50% fragmentation of positively and negatively single charged noncovalent clusters has been measured. CCE was found to increase linearly with the degrees of freedom (DoF) of the precursor ion, analogously to that observed for synthetic polymers. This suggests that fragmentation behavior (e.g. energy randomization) in covalent molecules and clusters are similar. Analysis of the slope of CCE with molecular size (DoF) indicates that activation energy of fragmentation of these clusters (loss of a monomer unit) is similar to that of the lowest energy fragmentation of protonated leucine–enkephalin. Positively and negatively charged aggregates behave similarly, but the slope of the CCE versus DoF plot is steeper for positive ions, suggesting that these are more stable than their negative counterparts. Copyright © 2013 John Wiley & Sons, Ltd.     

Interaction of water‐soluble tetrakis‐(1‐methyl‐4‐pyridiniyl)‐porphyrin and CdS naonoparticles

The interaction between positively charged porphyrin TMPyP(4) (tetrakis‐(1‐methyl‐4‐pyridiniyl) porphyrin) and negatively charged surface of colloidal CdS nanoparticles has been studied by absorption spectrum, fluorescence spectroscopy, and time‐correlated single‐photon‐counting methods. Addition of CdS colloid to a TMPyP(4) solution leads to TMPyP(4) adsorption onto the surface of CdS colloid with an apparent association constant of 4643 L/mol. This adsorption results in distinct changes in absorption spectrum of TMPyP (4) and the quenching of its′ fluorescence, but the biexponential fluorescence decay changes hardly. Nearly 90% of the fluorescence of 5 × 10^?6 mol/L TMPyP(4) can be quenched with 1.5 × 10^?4 mol/L CdS colloid. These spectral changes are attributed to the formation of a certain form complex TMPyP(4)‐CdS.     

A Peptide Dendron‐Based Shrinkable Metallo‐Hydrogel for Charged Species Separation and Stepwise Release of Drugs

A shrinkable supramolecular metallo‐hydrogel based on the L ‐glutamic acid dendron and magnesium showed reversible volume‐phase transition depending on pH changes. The hydrogel further showed selective shrinkage upon addition of positively charged species, while it remained in the gel state when negatively charged species were incorporated. Based on this property, the gel could be used as the matrix to efficiently separate ionic dye mixtures, in which the cationic dye was incorporated predominantly in the shrunken gel, while the negatively charged dye was released into the aqueous solution. More interestingly, the shrinkable gel can be used as a model drug‐delivery vehicle for the stepwise release of a two‐component drug system, in which the negatively charged drug is released first and then the second component is released with a pH trigger.