Synthesis of magnetoresistive La0.7Sr0.3MnO3 nanoparticles by an improved chemical coprecipitation method

La_0.7Sr_0.3MnO₃ nanoparticles were prepared by a simple chemical coprecipitation route. Structural, magnetoresistance (MR), and magnetic properties were investigated. Rietveld refinement of X-ray powder diffraction result shows that the sample is single-phase with the space group of R3¯C. The result of field-emission scanning electronic microscopy shows that most of the grain sizes are distributed from 50 to 200 nm. The composition determined by energy-dispersive spectroscopy is the stoichiometry of La_0.7Sr_0.3MnO₃. The ferromagnetic to paramagnetic transition is sharp with Curie temperature T_C=367 K, which further confirms that the sample is single-phase. The steep change in MR at low fields is attributed to the alignment of the magnetization, while the high-field MR is due to the grain boundary effect.     

Influence of microstructures on exchange bias behaviors of La0.7Sr0.3MnO3/La0.33Ca0.67MnO3 bilayers

Ferromagnetic La_0.7Sr_0.3MnO₃ (LSMO) and antiferromagnetic La_0.33Ca_0.67MnO₃ (LCMO) layers were grown on SrTiO₃ (STO) substrates by the pulsed laser deposition technique. LSMO films had rougher surfaces and larger grain sizes than LCMO films. Fully strained bilayers, in which each layer was as thin as 10 nm, were prepared by changing their stacking sequences, i.e. LSMO/LCMO/STO and LCMO/LSMO/STO. The former had higher T_C (350 K) than the latter (300 K), and exchange bias effects were only observed in the former bilayers. This revealed that microstructures could play an important role in the transport and magnetic properties of manganese oxide thin films.     

Structural, magnetic and magnetotransport behavior of La0.7SrxCa0.3−xMnO3 compounds

A systematic investigation of the structural, magnetic and electrical properties of a series of nanocrystalline La_0.7Sr_xCa_0.3−xMnO₃ materials, prepared by high energy ball milling method and then annealed at 900 °C has been undertaken. The analysis of the XRD data using the Win-metric software shows an increase in the unit cell volume with increasing Sr ion concentration. The La_0.7Sr_xCa_0.3−xMnO₃ compounds undergo a structural orthorhombic-to-monoclinic transition at x=0.15. Electric and magnetic measurements show that both the Curie temperature and the insulator-to-metal transition temperature increase from 259 K and 253 K correspondingly for La_0.7Ca_0.3MnO₃ (x=0) to 353 K and 282 K, respectively, for La_0.7Sr_0.3MnO₃ (x=0.3). It is argued that the larger radius of Sr²⁺ ion than that of Ca²⁺ is the reason to strengthen the double-exchange interaction and to give rise to the observed increase of transition temperatures. Using the phenomenological equation for conductivity under a percolation approach, which depends on the phase segregation of ferromagnetic metallic clusters and paramagnetic insulating regions, we fitted the resistivity versus temperature data measured in the range of 50-320 K and found that the activation barrier decreased with the raising Sr²⁺ ion concentration.     

Electrical and magnetic behavior of La0.7Ca0.3MnO3/La0.7Sr0.2Ca0.1MnO3 composites

The electrical transport properties and the magnetoresistance of La_0.7Ca_0.3MnO₃/La_0.7Sr_0.2Ca_0.1MnO₃ composites are investigated as a function of sintering temperature. On the basis of an analysis by X-ray powder diffraction and scanning electron microscopy we suggest that raising the sintering temperature enhanced the interfacial reaction and creates interfacial phases at the boundaries of the La_0.7Ca_0.3MnO₃ and La_0.7Sr_0.2Ca_0.1MnO₃. Results also show that in 3 kOe, and at the Curie temperature, the magnetoresistance value of 14% was observed for the composite sintered at 1300 °C. Based on the phenomenological equation for conductivity under a percolation approach, which depends on the phase segregation of ferromagnetic metallic clusters and paramagnetic insulating regions, we fitted the experimental resistivity—temperature data from 50-300 K and find that the activation barrier decreases as temperature is increased.     

Study on the phase separation of La0.7Sr0.3MnO3 nanoparticles by electron magnetic resonance

In this work, the technique of electron magnetic resonance (EMR) is used to measure the magnetic resonant spectra of La_0.7Sr_0.3MnO₃ nanoparticles synthesized by sol–gel routes with three different gelation agents (S1: Urea+citric acid; S2: citric acid, and S3: Urea+tri-sodium citrate). The purpose of this study is to investigate the influence of synthesis conditions on the magnetic properties of nanoparticles. Our ESR results show that Curie temperatures of La_0.7Sr_0.3MnO₃ nanoparticles with different gelation agents are slightly different (T_c∼340 to 360 K) and possess both paramagnetic (PM) and ferromagnetic (FM) phases in the temperature below T_c. Besides, a sharp FM–PM transition indicates that the combined agent of Urea+tri-sodium citrate creates a better quality in CMR nanomagnets.     

Superparamagnetic behavior of La0.67Sr0.33MnO3 nanoparticles prepared via sol-gel method

Magnetic nanoparticles of La_0.67Sr_0.33MnO₃ (LSMO) manganite were prepared by sol-gel method. Phase formation and crystal structure of the synthesized powder were examined by the X-ray diffraction (XRD) using the Rietveld analysis. The mean particle size was determined by the transmission electron microscopy (TEM). Infrared transmission spectroscopy revealed that stretching and bending modes are influenced by calcinations temperature. The temperature dependence of the ac magnetic susceptibility was measured at different frequencies and ac magnetic fields in the selected ranges of 40-1000 Hz and 80-800 A/m, respectively. The temperature dependence of ac susceptibility shows a characteristic maxima corresponding to the blocking temperature near room temperature. The frequency dependence of the blocking temperature is well described by the Vogel-Fulcher law. By fitting the experimental data with this law, the relaxation time τ₀=1.7×10⁻¹² s, characteristic temperature T₀=262±3 K, anisotropy energy E_a/k=684±15 K and effective magnetic anisotropy constant k_eff=2.25×10⁴ erg/cm³ have been obtained. dc Magnetization measurement versus magnetic field shows that some of LSMO nanoparticles are blocked at 293 K. The role of magnetic interparticle interactions on the magnetic behavior is also investigated.     

Electronic and magnetic phase transitions in (Sm0.65Sr0.35)MnO3 induced by temperature and magnetic field

Temperature (4.2–260 K) and magnetic field (0–50 kOe) dependencies of the DC electrical resistance, DC magnetization, and AC magnetic susceptibility of (Sm_0.65Sr_0.35)MnO₃ prepared from high purity components have been studied. (Sm_0.65Sr_0.35)MnO₃ undergoes a temperature-induced transition between low-temperature ferromagnetic metallic and high-temperature paramagnetic insulating-like states. A magnetic field strongly affects this transition resulting in a metallic state and “colossal” magnetoresistance in the vicinity of the metal↔insulator transition. Magnetic and electric properties of (Sm_0.65Sr_0.35)MnO₃ are different compared to those reported earlier for similar composition, which is attributable to the purity of the starting materials and/or different process of synthesis. The character of phase transformations observed in (Sm_0.65Sr_0.35)MnO₃ is compared to that reported for Gd₅(Si_xGe_4−x) intermetallic alloys with a true first order phase transition.     

Large magnetoresistance in low temperature metallic region of manganite compounds (La0.7−2xEux)(Ca0.3Srx)MnO3 (0.05≤x≤0.15)

Magnetoresistance (MR) and magnetization (dc and ac) measurements have been carried out on the manganites, (La_0.7−2xEu_x)(Ca_0.3Sr_x)MnO₃ (0.05≤x≤0.15), in the temperature range of 5-320 K. At 5 K, an unusually large MR of almost 98% is observed in the x=0.15 sample, nearly up to fields of 4-5 T. This large high-field MR occurs in the metallic region, far below the insulator-metal transition temperature, and does not vary linearly with applied field. The unusual magnetoresistance is explained in the light of various possibilities such as phase segregation, cluster spin-glass behavior, etc.     

Particle size effects on La0.7Ca0.3MnO3: size-induced changes of magnetic phase transition order and magnetocaloric study

The structure, magnetic properties, and magnetocaloric effect of La_0.7Ca_0.3MnO₃ ceramics with different particle sizes have been investigated. It is found that the Curie temperature increases first, and then decreases as particle size decreases and the type of magnetic phase transition changes from first-order to second-order, which may be attributed to surface pressure effects. The maximum magnetic entropy change and relative cooling power (RCP) show non-monotonic behaviors with decreasing the particle size. However, for the 3400 nm sample, the magnetic entropy change −ΔS_M reaches the maximum values of 6.41 and 8.63 J/kg K for the field changes of 2.0 and 4.5 T, respectively. Furthermore, the estimated large RCP values under lower magnetic fields in La_0.7Ca_0.3MnO₃ are comparable with those of typical magnetic refrigerant materials in the corresponding temperature range, suggesting those compounds might be promising candidates for magnetic refrigeration.     

Coexistence of large positive and negative magnetoresistance in La0.7Ca0.3MnO3 films with microcracks

The coexistence of large positive and negative low-field magnetoresistance (LFMR) in the ferromagnetic La_0.7Ca_0.3MnO₃ thin films with ordered microcrack (MC) distributions is reported. For the films with the highest linear density of MC, the negative LFMR can be up to −60% and rapidly changes to the positive value of 25% at 200 Oe field with the increase of temperature. We discuss the effect based on the spin-polarized tunneling and inhomogeneous magnetic state induced by the natural formations of MC in the films.     

Electrical conductivity and complex impedance analysis of 20% Ti-doped La0.7Sr0.3MnO3 perovskite

The electrical conductance of 20% Ti-doped La_0.7Sr_0.3MnO₃ (LSMO) was measured using admittance spectroscopy over a wide temperature and frequency ranges. The impedance plane plot shows semicircle arcs at different temperatures and an electrical equivalent circuit has been proposed to explain the impedance results. Activation energy inferred from conductance spectrum matches very well with the value estimated from relaxation time indicating that relaxation process and conductivity have the same origin. The electrical conductance of La_0.7Sr_0.3Mn_0.8Ti_0.2O₃ is found to be dependent on temperature and frequency. Also, the electronic conduction appears to be dominated by thermally activated hopping of small polaron (SPH) at high temperatures and by variable range hopping (VRH) at low temperatures.     

Interfacial spin interactions of ferromagnetic and antiferromagnetic manganite bilayers

A pulsed laser deposition technique was used to grow ferromagnetic La_0.7Sr_0.3MnO₃ (LSMO) films on antiferromagnetic La_0.33Ca_0.67MnO₃ (LCMO) and Pr_0.7Ca_0.3MnO₃ (PCMO) films in bilayer forms. The LSMO film on the PCMO layer had a more elongated out-of-plane lattice than that on the LCMO layer. The former had a lower ferromagnetic transition temperature (320 K) than the latter (350 K). The enhanced low-temperature magnetoresistance of the LSMO/PCMO bilayer suggests that the spin frustration is stronger at this bilayer than in the LSMO/LCMO bilayer. These differences indicate that strain state and defect concentration play important roles in governing interfacial spin interactions.     

Surface and transport studies on La0.7Ba0.3MnO3:SnO2 bilayer

We report on study of morphology, optical contrast and transport characteristics of La_0.7Ba_0.3MnO₃ (LBMO) manganite thin films bilayered with SnO₂ on Si (0 0 1) substrate, synthesized using pulsed laser deposition system. X-ray diffraction study reveals that both LBMO and SnO₂ show polycrystalline growth over the substrate. Atomic force microscopy shows interesting pyramidal structures of LBMO of size ∼2 μm × 1 μm × 0.1 μm. On the other hand, SnO₂ grows in the form of close packed cylindrical clusters of ∼200 nm radius. Near-field optical microscopy (NSOM) study using 532 nm laser reveal that optical NSOM output intensity in LBMO is four times less than SnO₂ signal. Transport characterizations show that this bilayer configuration exhibit non-linear current-voltage characteristics from 300 upto 50 K. The nature becomes linear below this temperature. The results project the system as a promising candidate in non-conventional device category in the area of spintronics.     

Improvement of refrigerant capacity of La0.7Ca0.3MnO3 material with a few percent Co doping

The influence of first and second order magnetic phase transitions on the magnetocaloric effect (MCE) and refrigerant capacity or relative cooling power (RCP) of La_0.7Ca_0.3MnO₃ and La_0.7Ca_0.3Mn_0.95Co_0.05O₃ materials has been investigated. Large low-field-induced magnetic entropy changes are observed in La_0.7Ca_0.3MnO₃ and La_0.7Ca_0.3Mn_0.95Co_0.05O₃ materials. The La_0.7Ca_0.3MnO₃ material experiences a large entropy change with a first-order magnetic phase transition at the Curie temperature, T_C. On the other hand, La_0.7Ca_0.3Mn_0.95Co_0.05O₃ displays a smaller entropy change with a second order phase transition. While a first-order magnetic transition material induces a larger MCE (7.528 J/kg K at 5 T) at T_C, this is limited to a narrow temperature range, resulting in a relatively small RCP (218 J/kg), while the Co-doped second-order magnetic transition material induces a smaller MCE (7.14 J/kg K for 5 T), but it is spread over a broader temperature range, resulting in a larger RCP (308 J/kg). The maximum magnetoresistance (MR, defined as ρ(0)/ρ(H)-1) under a field of 5 T is about 206% and 333% for La_0.7Ca_0.3MnO₃ and La_0.7Ca_0.3Mn_0.95Co_0.05O₃, respectively. The refrigeration capacity (RCP) is enhanced in La_0.7Ca_0.3Mn_0.95Co_0.05O₃ (by about 41%) due to small changes from Co doping. The magnetocaloric features of these materials at lower magnetic fields (MCE=3.163 for La_0.7Ca_0.3Mn_0.95Co_0.05O₃ and 4.63 J/kg K for La_0.7Ca_0.3MnO₃ at 1 T), and the high RCP and MR can provide some ideas for exploring novel magnetic refrigerants that can operate with permanent magnets rather than superconducting ones as the magnetic field source.     

Large magnetoresistance induced by surface ferromagnetism in A-type antiferromagnetic La0.4Sr0.6MnO3 nanoparticles

Grain size effects on magnetic and transport properties for heavily Sr-doped A-type antiferromagnetic La_0.4Sr_0.6MnO₃ ceramics were studied. It was observed that with decrease in grain size, surface ferromagnetism could be introduced due to bond-breaking at surfaces. With decrease in grain size, the surface ferromagnetism was enhanced, and the phase transition order distinguished from the Arrott plot was a second one. The surface-induced ferromagnetism was insulating as judged from transport properties. With decrease in grain size, magnetoresistance was largely improved for both high magnetic and low magnetic fields. Under a 500 Oe magnetic field, the magnetoresistance is improved from 0.2%, 0.1%, 0.03% and 0.02% for the sample with grain size of 150 nm at 10, 100, 200 and 300 K, respectively, to 3%, 2.3%, 0.43% and 0.12% for the sample with grain size of 20 nm at 10, 100, 200 and 300 K. It was interesting to find that large magnetoresistance could be induced due to the surface ferromagnetism in A-type antiferromagnetic La_0.4Sr_0.6MnO₃ nanoparticles, which suggested that it was possible to search for manganites with relatively high low-field magnetoresistance in nanostructured A-type antiferromagnetic materials.     

Hydrothermal synthesis and Magnetocaloric effect of La0.5Ca0.3Sr0.2MnO3

The hydrothermal synthesis and magnetic entropy change for the perovskite manganite La_0.5Ca_0.3Sr_0.2MnO₃ have been studied. The La_0.5Ca_0.3Sr_0.2MnO₃ can be produced as phase-pure, crystalline powders in one step from solutions of metal salts in aqueous potassium hydroxide solution at a temperature of 513 K in 72 h. Scanning electron microscopy shows that the materials are made up of cuboid-shaped particles in typical dimension of 4.0×2.5×1.6 μm. Heat treatment can improve the magnetocaloric effect for the hydrothermal sample. The maximum magnetic entropy change ΔS_M for the as-prepared sample is 0.88 J kg⁻¹ K⁻¹ at 315 K for a magnetic field change of 2.0 T. It increases to 1.52 J kg⁻¹ K⁻¹, near its Curie temperature (317 K) by annealing the sample at 1473 K for 6 h. The hydrothermal synthesis method is a feasible route to prepare high-quality perovskite material for magnetic refrigeration application.     

Magnetic phase coexistence in Tb- and Sr-doped La0.7Ca0.3MnO3 manganite:A temperature-dependent neutron diffraction study

We report the results of the temperature-dependent neutron diffraction measurements on the nearly half-doped (La_0.325Tb_0.125)(Ca_0.3Sr_0.25)MnO₃ manganite sample. The simultaneous doping of magnetic Tb³⁺ and divalent Sr²⁺ in the La_0.7Ca_0.3MnO₃ system results into a large A-site size disorder. Rietveld refinement of neutron diffraction data reveal that the single phase sample crystallizes in a distorted orthorhombic structure. Increased 〈r_A〉 value affects the transport behavior that results into an insulating-like behavior of the sample. Under application of 1 T field sample exhibit insulating-like behavior while insulator-metal transition (T_IM) is exhibited under 5 and 8 T fields. Variable range hoping (VRH) mechanism of charge carriers is exhibited in the insulating region. Field cooled and zero field cooled magnetization measurement shows the Curie temperature (T_C)~47 K. The refinement of the ND data collected at various temperatures below 300 K shows that there is no structural phase transition in the compound. Around 100 K, a magnetic peak appears at lower angle that can be ascribed to the presence of the A-type antiferromagnetic (AFM) phase. Two more peaks are observed around 50 K at lower angles that can be fitted in CE-type antiferromagnetic phase. Splitting of the peaks at lower temperatures is the signature of orbital ordering in the presently studied nearly half-doped manganite system. Results of the detailed structural analysis of the temperature-dependent ND measurements on (LaTb)_0.45(CaSr)_0.55MnO₃ sample has been discussed in the light of coexisting A-type and CE-type antiferromagnetic phases present in the sample at low temperature.     

Magnetic,electrical transport and electron spin resonance studies of ferromagnetic insulating manganites Nd0.85Na0.15MnO3

We have investigated the magnetic, electrical transport and electron spin resonance (ESR) properties of polycrystalline Nd_0.85Na_0.15MnO₃ prepared by sol–gel method. A ferromagnetic–paramagnetic (FM–PM) transition is observed around 110 K, which is not accompanied by a metal–insulator transition. The sample displays the complete PM state associated with the ESR spectra fitted by single Lorentzian line shape above 130 K. Below 130 K, ESR spectra become distorted and then linewidth increases rapidly, where short-range magnetic order develops and coexists with PM phase due to the inhomogeneous magnetic state. In addition, the large difference between the activation energies obtained from the resistivity and ESR parameters (peak-to-peak linewidth and line intensity) at the frame of adiabatic small polaron hopping model is pointed out for Nd_0.85Na_0.15MnO₃.     

Thermomagnetic transitions and coercivity mechanism in bulk composite Nd60Fe30Al10 alloys

The thermomagnetic behaviour (within the temperature range 553-300 K) for the bulk composite Nd₆₀Fe₃₀Al₁₀ alloy is described in terms of a transition from paramagnetic to superferromagnetic state at T=553 K, followed by a ferromagnetic ordering for T<473 K. For the superferromagnetic regime, the alloy thermomagnetic response was associated to a homogeneous distribution of magnetic clusters with mean magnetic moment and size of 1072 μ_B and 2.5 nm, respectively. For T<473 K, a pinning model of domain walls described properly the alloy coercivity dependence with temperature, from which the domain wall width and the magnetic anisotropy constant were estimated as being of ≈8 nm and ≈10⁵ J/m³, typical values of hard magnetic phases. Results are supported by microstructural and magnetic domain observations.     

Thermal conductivity of La0.67(CaxSr1−x)0.33MnO3 (x=0, 0.5, 1) and La0.6Y0.07Ca0.33MnO3 pellets between 10 and 300 K

Thermal conductivity (λ) of nanocrystalline La_0.67(Ca_xSr_1−x)_0.33MnO₃ (x=0, 0.5, 1) and La_0.6Y_0.07Ca_0.33MnO₃ pellets prepared by a novel ‘pyrophoric’ method have been studied between the temperature range 10 and 300 K. Our data show that the magnitude of thermal conductivity is strongly influenced by the ion substitutions at La-site. The analysis of the thermal conductivity data indicates that the thermal transport is governed largely by phonons scattering in these systems and the electronic contribution is as small as 0.2-1% of total thermal conductivity (λ_total). At low temperatures (<90 K) 2D like lattice defects contribute to the phonon scattering dominantly and its strength increases with increasing Sr content and also with partial substitution of La by Y. Depending upon the composition of the samples, the magnon thermal conductivity contributes 2-15% of λ_total close to T_C. In the paramagnetic regime the unusual increase in λ_total keeps signature of large dynamic lattice distortion.