The effect of olefinic terminal chains on the mesomorphic properties of 4,4′-disubstituted diphenyldiacetylenes

New diphenyldiacetylenes of the type with A, B = H and/or F; m = 0, 1; n = 1–4; and X = C _n H_2n+1, F, CF₃ or CN were synthesized and their mesomorphic properties determined by hot stage polarizing microscopy and DSC. When m = 0, all of these compounds showed only a nematic phase except when X = CF₃ when both nematic and smectic A phases were seen. Both clearing and melting temperatures were higher than those reported for substitution with the corresponding alkyl chains but the much larger increase in clearing temperatures produced considerably wider nematic phases. Eutectic mixtures of a few of these olefins yielded nematic materials also having much wider temperature ranges and higher clearing temperatures than the eutectic mixtures of the alkyl compounds, while retaining their high birefringence and low viscosities. Such materials are of interest for beam-steering devices. Four of the diacetylenes with m = 1 (A, B = H) were also prepared (X = C₆H₁₃, F, n= 2, 3). When X was C₆H₁₃ (n=2), the nematic range was smaller in the 2- than in the 1-olefin but wider than in the alkyl series. When X=F, either no nematic phase or a monotropic one was observed, whereas the 1-olefins gave a much wider nematic phase. Both transition temperatures were lower than those for the corresponding 1-olefin and alkyl analogues. The compound with X=C₆H₁₃ and n=2 had a melting temperature below room temperature.     

含全氟烃基的联苯酯类液晶的合成及其介晶性

全氟烃或半氟烃链无手性液晶化合物可能呈现铁电液晶性, 具有较大的学术及应用价值而受到研究人员的重视. 合成了全氟己基苯甲酸联苯酯类液晶化合物: ROC₆H₄C₆H₄O₂CC₆H₄C₆F₁₃ (3a～3e), C₃H₇C₆H₄C₆H₄O₂CC₆H₄C₆F₁₃ (6a)及其烃衍生物. 用差示扫描量热法(DSC)和偏光显微镜(POM)对其介晶性研究发现: 烃衍生物呈有序度较低的向列相, 熔点较高, 清亮点较低, 液晶相较窄. 全氟烃基取代的化合物出现多个有序度较高的近晶相, 熔点较低, 清亮点高, 介晶相温度范围宽.     

Synthesis and mesomorphic properties of 4-alkylamino-4'-substituted diphenyldiacetylenes

Various substituted aminodiphenyldiacetylenes of the type with X = C₃H₇, C₅H₁₁, F or NO₂ and R, R' = H, CH₃-C₆H₁₃ were synthesized and their mesomorphic properties determined. Semi-empirical and ab initio quantum chemical calculations using AM1, 421G and 631G* suggested that the amino group would increase the dielectric anisotropy and optical birefringence as compared to the alkyl chain. Mesomorphic properties were found to be poor with the maximum nematic phase range being 44.8°C and many of the compounds having no nematic phase. Both melting temperatures and enthalpies for those having nematic phases were too high to form good eutectic mixtures.     

Synthesis and mesomorphic properties of 4-alkylamino-4'-substituted diphenyldiacetylenes

Various substituted aminodiphenyldiacetylenes of the type with X = C₃H₇, C₅H₁₁, F or NO₂ and R, R' = H, CH₃-C₆H₁₃ were synthesized and their mesomorphic properties determined. Semi-empirical and ab initio quantum chemical calculations using AM1, 421G and 631G* suggested that the amino group would increase the dielectric anisotropy and optical birefringence as compared to the alkyl chain. Mesomorphic properties were found to be poor with the maximum nematic phase range being 44.8°C and many of the compounds having no nematic phase. Both melting temperatures and enthalpies for those having nematic phases were too high to form good eutectic mixtures.     

Impact of the Spacer on the Condensing Effect of Fluorinated Chains Investigated by Grazing Incidence X-ray Diffraction on Ultrathin Langmuir Monolayers

Langmuir monolayers of double perfluoroalkyl(alkyl) chain amphiphiles fitted with a monomorpholinophosphate polar head, [C(n)F(2n+1)(CH(2))(m)O](2)P(O)[N(CH(2)CH(2))(2)O] (di(FnHm)MP with n = 6, 8, or 9; and m = 1 or 2), were investigated by surface pressure (π)/molecular area (A(0)) compression isotherms for temperatures ranging from 15 to 50 °C, and by grazing-incidence X-ray diffraction (GIXD) at 25 °C. Ultrathin monolayers were obtained for these short surfactants. Though the hydrocarbon spacer is short, it has a remarkable impact on the monolayer's organization. At 25 °C, whereas di(F8H2)MP monolayer presents a liquid expanded (LE)/liquid condensed (LC) transition, simply replacing one CH(2) by a CF(2) in the latter compound's structure at constant chain length, i.e. shortening the spacer from 2 to 1 CH(2) (as in di(F9H1)MP), suppresses the LE phase. At 25°, GIXD established that for both di(F8H2)MP and di(F9H1)MP, the chains form an hexagonal lattice in the LC phase. The collective tilt of the two compounds is close to zero. The lattice of the dense phase can be compressed, as assessed by the continuous linear decrease of the d spacing with increasing pressure. This indicates that the azimuthal distribution of the molecular tilts is progressively reduced upon compression. The d value for di(F9H1)MP is significantly lower than that of di(F8H2)MP, providing evidence for strong condensing effect of the fluorinated chains. Molecular areas were determined directly from the compression curves and also from the X-ray data, the latter allowing reconstruction of the compression isotherms. The calculated lattice compressibilities are ～30% and 50% of the macroscopic compressibilities for di(F9H1)MP and di(F8H2)MP, respectively. Comparison with the experimentally determined isotherms shows that the monolayer of di(F9H1)MP is more stable than that of di(F8H2)MP. The enthalpies and entropies determined for di(F9H1)MP and di(F8H2)MP, derived from the Clausius-Clapeyron equation, confirm that the observed transitions are both of the LE/LC type, although the triple point temperatures are strikingly different (27 °C vs -18 °C); this large difference further illustrates the stabilizing effect of the fluorinated chains. Disorder is hindered by the fluorinated chains and facilitated by a hydrocarbon spacer when larger than 1 CH(2).     

Mesomorphic properties of achiral halogen-substituted banana-shaped compounds

Three banana-shaped achiral compounds, derivatives of 4,6-dichloro-1,3-phenylene bis-[4-(4- n -octyloxyphenyliminomethyl) benzoate], were synthesized by varying the substituent ( X =H, F and Cl). Their mesomorphic properties were investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray analysis. The compound with X = H exhibited an enantiomeric nematic phase. The compounds with X = F and Cl formed a nematic phase on heating, while on cooling they formed a nematic phase at high temperature and a smectic A phase at a lower temperature (monotropic). A schematic representation of the mesophase structures for the compound with X = F is also illustrated.     

Liquid-crystalline zinc(II) and iron(II) alkyltriazoles one-dimensional coordination polymers

Several series of unidimensional coordination polymers of formula [Zn(C(n)H(2n+1)trz)(3)](Cl)(2)·xH(2)O (n = 18, 16, 13, 11, 10, trz = 4-substituted-1,2,4-triazole), [Zn(C(18)H(37)trz)(3)](ptol)(2)·xH(2)O, [Fe(C(n)H(2n+1)trz)(3)](X)(2)·xH(2)O (n = 18, 16, 13, 10; X = Cl(-) or ptol(-), where ptol(-) = p-tolylsulfonate anion), and [Fe(C(18)H(37)trz)(3)](X)(2)·xH(2)O (X = C(8)H(17)PhSO(3)(-) and C(8)H(17)SO(3)(-)) are reported with their thermal, structural, and magnetic properties. Most of these materials exhibit thermotropic lamellar mesophases at temperatures as low as 410 K, as confirmed by textures observed by polarized optical microscopy. The corresponding phase diagrams deduced by differential scanning calorimetry are also reported. All iron-containing materials present a spin crossover phenomenon that occurs at temperatures ranging from 242 to 360 K, only slightly below the mesophase temperature domain, and remains complete and cooperative, even for the longer alkyl substituents. The use of stable diamagnetic Zn(II) analogues proves to be very useful to characterize the comparatively less stable and less crystalline Fe(II) analogues.     

Syntheses of 1-alkyl-1,2,4-triazoles and the formation of quaternary 1-alkyl-4-polyfluoroalkyl-1,2,4-triazolium salts leading to ionic liquids

1,2,4-triazole was alkylated (alkyl = methyl, butyl, heptyl, decyl) at N-1 in >90% isolated yields. The resulting 1-alkyl triazoles were quaternized at N-4 in >98% isolated yields using fluorinated alkyl halides with >98% isolated yields, under neat reaction conditions at 100-120 degrees C to form N1-CH(3)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-triazolium (Taz) iodide (m = 1, 6), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz iodide (m = 1, 4, 6), N1-C(7)H(15)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz iodide (m = 1, 4, 6), N1-C(10)H(21)-N4-(CH(2))(2)C(m)F(2)(m)(+1)-Taz iodide (m = 1, 4), and N1-C(n)H(2)(n )(+ 1)-N4-(CH(2))(2)F-Taz bromide (n = 4, 7, 10). Single-crystal X-ray analyses confirmed the structure of [1-CH(3)-4-CH(2)CH(2)CF(3)-Taz](+)I(-). It crystallized in the orthorhombic space group Pccn, and the unit cell dimensions were a = 13.8289(9) A, b = 17.3603(11) A, c = 9.0587(6) A (alpha = beta = gamma = 90 degrees ). Metathesis of these polyfluoroalkyl-substituted triazolium halides with other salts led to the formation of quaternary compounds, some of which comprise ionic liquids, namely, [R(R(f))-Taz](+)Y(-) (Y = NTf(2), BF(4), PF(6), and OTf), in good isolated yields without the need for further purification: N1-CH(3)-N4-(CH(2))(2)C(m)F(2)(m)( +) (1)-Taz Y (m = 1, 6; Y = NTf(2)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 1, 4, 6; Y = NTf(2)), N1- C(7)H(15)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 1, 4, 6; Y = NTf(2)), N1-C(10)H(21)-N4-(CH(2))(2)C(m)F(2)(m)(+1)-Taz Y (n = 1, 4; Y = NTf(2)), N1-C(n)H(2)(n )(+ 1)-N4-(CH(2))(2)F-Taz Y (n = 7, 10; Y = NTf(2)), N1-C(10)H(21)-N4-(CH(2))(2)F-TazY (Y = OTf), N1-C(7)H(15)-N4-(CH(2))(2)F-TazY (Y = BF(4)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m) (+ 1)-Taz Y (m = 4, 6; Y = PF(6)), N1-C(7)H(15)-N4-(CH(2))(2)C(4)F(9)-Taz Y (Y = PF(6)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 4, 6; Y = OTf). All new compounds were characterized by (1)H, (19)F, and (13)C NMR and MS spectra and elemental analyses. T(g)s and T(m)s of ionic liquids were determined by DSC.     

Thermal behavior of perfluoroalkylsiloxane monolayers on the oxidized Si(100) surface

The thermal stability of perfluoralkylsiloxane monolayers in a vacuum is investigated via X-ray photoelectron spectroscopy (XPS) for temperatures up to 600 degrees C. 1H,1H,2H,2H,-perfluorodecyltrichlorosilane (FDTS) monolayers are deposited on oxidized Si(100) surfaces from the vapor phase with various degrees of surface coverage. Significant monolayer desorption is observed to occur at temperatures below 300 degrees C regardless of the initial monolayer coverage. The desorption mechanism follows first-order kinetics and is independent of the initial coverage. Removal of FDTS is found to occur by the loss of the entire molecular chain, as evidenced by the fact that the CF(3)/CF(2) peak area ratios remain unaffected by the annealing process although CF(n)()/Si peak ratio declines with annealing. This is in sharp contrast to the behavior observed for octadecyltrichlorosilane monolayer for which elevated temperature leads to C-C bond breakage and successive shortening of the alkyl chain. It is also shown that the binding energy and the shape of the F 1s line are good indicators of the degree of disorder in the chain, as well as a measure of the interaction of the chain with the silicon surface.     

Application of trimethylvinylsilane as a convenient synthetic precursor of (Perfluoroalkyl)ethenes: An unusual fluoride-induced elimination-desilylation coupled reaction

A convenient and effective method for the preparation of perfluoroalkylated ethenes is described. First, the free radical addition of perfluoroalkyl iodides to trimethylvinylsilane in the presence of AIBN gave iodoethylsilane intermediates (F(CF(2))(n)()CH(2)CHISiMe(3), n = 4 (1), 6 (2), 8 (3), 10 (4); 94-99%). Then an unusual dehydrohalogenation-desilylation reaction was effected by tetrabutylammonium fluoride, and finally the product isolation (F(CF(2))(n)()CH=CH(2) (5-8), 62-87%) was facilitated using a fluorous phase separation technique. This novel approach can also be applied to adjust short C(2) hydrocarbon units to functionalized fluorinated segments (e.g., HOCH(2)(CF(2))(8)CH=CH(2) (11), 71%). All structures were verified by state-of-the-art multinuclear one- and two-dimensional NMR experiments involving both homo- ((19)F-(19)F) and heteronuclear ((1)H-(13)C, (19)F-(13)C) correlations based on the GMQFCOPS and inverse (1)H and/or (19)F detected GHSQC, GHMQC sequences with broad-band adiabatic (13)C decoupling.     

Spectroscopic and structural studies on polyfluorophenyl tellurides and tellurium(IV) dihalides

Bis(fluorophenyl) tellurides R2Te (R = C6F2H3 (1), CF3C6F4 (2), CF3C6F4OC6F4 (3), and C6F5 (4)) are synthesized by the facile reaction of Na2Te with bromo-fluorobenzenes, RBr. The corresponding bis(fluorophenyl)tellurium(IV) dihalides, R2TeHal2 (Hal = F, Cl, and Br) (5-16), are obtained by the oxidation of 1-4 with mild halogenating agents (XeF2, SO2Cl2, and Br2). The dihalides show temperature-dependent NMR spectra. On the basis of the 19F NMR spectra of the two series, (C6F2H3)2TeHal2 (Hal = F (5), Cl (9), and Br (13)) and R2TeCl2 (R = C6F2H3 (9), CF3C6F4 (10), CF3C6F4OC6F4 (11), and C6F5 (12)), the coalescence temperatures, T(c), and free enthalpies, DeltaG, of rotation of the TeC bonds are determined. The activation enthalpies for the dichlorides/dibromide 9-13 are in the range of 14.4-15.2 kcal mol(-1) and that for the difluoride 5 is considerably lower at 10.7 kcal mol(-1). In addition to thorough spectroscopic characterization of 1-16, the crystal structures of the monotellurides 2 and 4 as well as of the tellurium(IV) dihalides 5, 6, 9, 10, and 13 were determined. The dihalides show interesting intermolecular Te...Hal contacts, significantly shorter than the sum of the van der Waals radii, leading to different networks of association.     

Conformational analysis and assignments of relative stereocenter configurations in fluoroalkyl-iridium complexes using 19F[1H] HOESY experiments. Comparison with solid-state X-ray structural results

Solution conformations about the metal-carbon bond of the secondary fluoroalkyl ligands in iridium complexes [IrCp(PMe(3))(R(F))X] [Cp* = C(5)Me(5); R(F) = CF(CF(3))(2), X = I (1), CH(3) (2); R(F) = CF(CF(3))(CF(2)CF(3)), X = I (4), CH(3) (5)] have been determined using (19)F[(1)H] HOESY techniques. The molecules adopt the staggered conformation with the tertiary fluorine in the more hindered sector between the PMe(3) and X ligands, with CF(3) (and CF(2)CF(3)) substituents lying in the less hindered regions between PMe(3) and Cp or X and Cp. In molecules containing the CF(CF(3))(2) ligand, these conformations are identical to those adopted in the solid state. For compound 4, containing the CF(CF(3))(CF(2)CF(3)) ligand, two diastereomers are observed in solution. Solution conformations and relative stereocenter configuration assignments have been obtained using (19)F[(1)H] HOESY and correlated with the X-ray structure for the major diastereomer of 4, which has the (S(Ir), S(C)) or (R(Ir), R(C)) configuration. Relative stereocenter configurations of analogue 5, for which no suitable crystals could be obtained, were assigned using (19)F[(1)H] HOESY and proved to be different from 4, with 5 preferring the (S(Ir), R(C)) or (R(Ir), S(C)) configuration.     

Pressure-temperature phase diagrams of smectogenic 4'-alkyl-4-cyanobiphenyls (9CB, 10CB, 11CB and 12CB)

The pressure-temperature ( p - T ) phase diagrams for four smectogenic members of the 4'-alkyl-4-cyanobiphenyl homologous series ( n CB, n =9, 10, 11 and 12) over the temperature range 320-410 K and pressure range 0.1-300 MPa (3 kbar) were constructed using DTA. At 1 atm 9CB exhibits nematic and smectic A d phases, while the other members show only the smectic A d phase. However, at elevated pressures the clearing line splits in the case of 10CB and 11CB which indicates the induction of a nematic phase. It was found that the triple point, where the isotropic, nematic and smectic phases coexist, is strongly shifted to higher pressures with increasing chain length. This was interpreted as being caused by a loss of the rod-like shape of the molecules containing longer alkyl tails which explore a range of conformations. The slope of the clearing line, d T /d p , depends strongly on the length of the alkyl chain for the n CB series, but does not show a step-wise change between the nematogenic and smectogenic members.     

碳氟-碳氢表面活性剂混合水溶液在油面上铺展

本文研究RfCONH(CH2)3N(C2H5)2CH3I/CnH2n 1,COONa及RfCOONa/CmH2m 1N(CH3)3Br(Rf=F[CF(CF3)CF2O]2CF(CF3);n=7,8.11,13;m=8,10,12)两类正，负离子碳氟－碳氢表面活性剂混合水溶液在油面上的铺展及对油面的密封性能。研究表明在碳氟表面活性剂中加入异电性碳氢表面活性剂可大大降低碳氟表面活性剂水溶液的铺展浓度，也可使一些因素表面张力较高而不能铺展的碳氟表面活性剂水溶液在油面上铺展。在碳氟表面活性剂中加入异电性碳氢表面活性剂可提高水膜对油面的密封性。若在混合表面活性剂中加入黄原胶，水膜的密封性能更好。     

The synthesis and liquid crystal transition temperatures of some weakly polar nematic methyl (E)-[trans-4-substituted-cyclohexyl]-allyl ethers

We have introduced an oxygen atom and a carbon-carbon double bond with a trans-configuration (E) into the terminal alkyl chain of a wide variety of liquid crystalline cyclohexane derivatives to produce a variety of new methyl (E)-allyl ethers. The melting points and tendency to form smectic mesophases are often low, while nearly all of the compounds prepared exhibit a nematic phase. Thus, even two-ring derivatives can exhibit nematic phases over a wide temperature range (≤80°C), sometimes starting below room temperature (T_m≈10°C). Comparisons with the corresponding derivatives incorporating either just an oxygen atom or just a carbon-carbon double bond in the same position indicate that synergetic effects lead to broader nematic phases than would otherwise have been expected. Thus many of the new methyl (E)-allyl ethers exhibit nematic phases over a wider temperature range than the corresponding materials with an unsubstituted alkyl chain attached to the cyclohexyl ring. The new compounds are easily prepared from known starting materials. Many intermediates are themselves liquid crystalline. This allows investigation of the relationship between liquid crystal transition temperatures and the nature of the terminally substituted alkyl chain (for example, incorporating C=C, OH, CO₂C₂H₅ and OCH₃ groups).     

Liquid crystal polymers. 14. Synthesis and properties of thermotropic poly(1,4-alkylphenylene terephthalates)

A series of terephthalate polyesters was prepared from substituted hydroquinone monomers that contained a single cyclic or branched alkyl group. All the polymers were crystalline with melting points well below 400°C that decreased as the size of the cycloalkyl substituent increased. Most of the polymers had clearing temperatures below 400°C and all formed nematic melts. Copolyesters that contained equimolar amounts of two different substituted hydroquinone monomers, which were crystalline and had broad temperature ranges for nematic phase formation, were also prepared.     

The effect of polar substituents on the heterocyclic benzoxazoles

The synthesis, characterization, and mesomorphic properties of a new type of heterocyclic compounds 1, 2 derived from benzoxazole are reported. In order to understand the relationship between the structure and the mesomorphic behavior, compounds containing a variety of polar substituents (i.e., X=H, F, Cl, Br, CH₃, CF₃, OCH₃, NO₂, CN, OH, NMe₂, COOCH₃) on the terminal end were prepared. The phase behavior of these mesogenic compounds was characterized and studied by differential scanning calorimetry (DSC) and polarization optical microscopy. The formation of mesophases was strongly dependent on the electronic and/or the steric factors of the substituents. In general, a mesophase was better induced by introduction of a polar substituent. Compounds (X=H) formed a crystalline phase, however, other compounds, except for X=OH, exhibited nematic or smectic A phases. Interestingly all compounds with electron-donating substituents (X=CH₃, OCH₃, NMe₂) exhibited nematic phases, however, other compounds with electron-withdrawing substituents (X=F, Cl, Br, CF₃, NO₂, CN, COOCH₃) formed smectic A phases. Compounds (X=NO₂, CN, COOCH₃) have higher clearing temperatures than those of other homologues, and the higher T_cl was attributed to an enhanced conjugative interaction. However, no linear correlation between the clearing temperature or the temperature range of mesophases with Hammett σ_p constants was found. The fluorescent properties of the compounds were examined. All λ_max peaks of the absorption and photoluminescence spectra of compounds occurred at ca. 348-381 and 389-478 nm, respectively. Whereas, the quantum yields of some compounds were relatively low.     

Synthesis and spectroscopy of N3P3X5OCH=CH2 (X = Cl, F, OCH3, OCH2CF3, N(CH3)2) and N3P3X4(OCH=CH2)2 (X = Cl, N(CH3)2). Correlations of ultraviolet photoelectron spectroscopy and nuclear magnetic resonance data to electronic and geometrical structure

The syntheses of the vinyloxycyclotriphosphazene derivatives N3P3X5OCH=CH2 (X = OMe, OCH2CF3) and the N3P3(NMe2)4(OCH=CH2)2 isomeric mixture along with improved preparations of N3P3X5OCH=CH2 (X = F, NMe2) are reported. The interactions between the vinyloxy function and the cyclophosphazene in these and the previously reported N3P3Cl5 (OCH=CH2) and N3P3F6-n(OCH=CH2)n (n = 1-4) have been examined by ultraviolet photoelectron spectroscopy (UPS) and NMR spectroscopy. The UPS data for the chloro and fluoro derivatives show a strong electron-withdrawing effect of the phosphazene on the olefin that is mediated with decreasing halogen substitution. The 1H and 13C NMR data for N3P3X5OCH=CH2 (X = F, Cl, OMe, OCH2CF3, NMe2) show significant changes as a function of the phosphazene substituent. There is a linear correlation between the beta-carbon chemical shift on the vinyloxy unit and the phosphorus chemical shift at the vinyloxyphosphorus centers. The chemical shifts of the different phosphorus centers on each ring are also related in a linear fashion. These relationships may be understood in terms of the relative electron donor-acceptor abilities of the substituents on the phosphazene ring. The 1H NMR spectra of the N3P3(NMe2)4(OCH-CH2)2 isomeric mixture allow for assignment of the relative amounts of cis and trans isomers. A model for the observed cis preference in the formation of N3P3Cl4(OCH=CH)2 is presented.     

A Novel Pentaerythritol-based Carbosilane Liquid Crystalline Dendrimer Containing 12 Nitroazobenzene Groups on the Periphery

A novel liquid crystalline dendrimer with peripheral mesogenic units was successfully prepared. Azo-reaction and Williamson synthesis were employed in the preparation of the mesogenic unit 4-[4-(6-hydroxyhexyloxy)-phenylazo]nitrobenzene (M-NO2). A terminal Si-Cl functional carbosilane dendrimer based on pentaerythritol was used as dendritic scaffold and subsequently functionalized with the aforementioned groups. Investigation of the liquid crystalline properties of the mesogen-functionalized dendrimer PCSi-IG-NO2 by polarizing optical microscopy, DSC, and X-ray diffraction showed that it exhibits smectic E (SE) phase, different from the corresponding mesogenic unit, which shows nematic phase. Furthermore, the temperatures of both the melting point and the clearing point of the mesogen-functionalized dendrimer decrease, and the temperature region of the SE phase is wider than that of the nematic phase.     

Electrochemical, spectroscopic, and DFT study of C60(CF3)n frontier orbitals (n = 2-18): the link between double bonds in pentagons and reduction potentials

The frontier orbitals of 22 isolated and characterized C(60)(CF(3))(n) derivatives, including seven reported here for the first time, have been investigated by electronic spectroscopy (n = 2 [1], 4 [1], 6 [2], 8 [5], 10 [6], 12 [3]; the number of isomers for each composition is shown in square brackets) fluorescence spectroscopy (n = 10 [4]), cyclic voltammetry under air-free conditions (all compounds with n 相似文献