Electrochemical Reduction of Carbon Dioxide to Methanol on Hierarchical Pd/SnO2 Nanosheets with Abundant Pd–O–Sn Interfaces

Electrochemical conversion of CO₂ into fuels using electricity generated from renewable sources helps to create an artificial carbon cycle. However, the low efficiency and poor stability hinder the practical use of most conventional electrocatalysts. In this work, a 2D hierarchical Pd/SnO₂ structure, ultrathin Pd nanosheets partially capped by SnO₂ nanoparticles, is designed to enable multi‐electron transfer for selective electroreduction of CO₂ into CH₃OH. Such a structure design not only enhances the adsorption of CO₂ on SnO₂, but also weakens the binding strength of CO on Pd due to the as‐built Pd–O–Sn interfaces, which is demonstrated to be critical to improve the electrocatalytic selectivity and stability of Pd catalysts. This work provides a new strategy to improve electrochemical performance of metal‐based catalysts by creating metal oxide interfaces for selective electroreduction of CO₂.     

One-step synthesis of ultra-small amount of Pd-Alloyed Zinc Nanosheets for efficient electrochemical CO2 reduction to CO

The practicality of the electrochemical CO₂ reduction technique depends on the development of cost-effective, robust, and highly selective catalysts. To achieve this goal, we have engineered self-supported 3D electrodes composed of Pd-Zn nanosheets (NSs) for CO₂ electrochemical reduction to CO with minimal Pd content. This innovative electrode with an increased surface area was created using an electrodeposition method employing a dynamic hydrogen bubble template. By precisely adjusting the Pd content, we improved the thickness, porosity, and surface area of the electrodes, resulting in a CO₂-to-CO selectivity reaching as high as 88.5 %, with an average of at least 80 % sustained over 10 hours. This remarkable improved activity can be attributed to the synergistic effects of an appropriate Pd/Zn atomic ratio as well as to the large surface area of nanosheets structures with rich edge active sites. Furthermore, to get around the limitations of CO₂ mass transfer, reactions were done at high pressures conditions ranging from 3 to 9.5 bar; this strategic approach yielded an outstanding partial current density of −304.6 mA cm⁻² for CO. These noteworthy findings establish concepts for constructing effective and earth-abundant CO-producing electrocatalysts.     

Surface Reconstruction of Ultrathin Palladium Nanosheets during Electrocatalytic CO2 Reduction

A surface reconstructing phenomenon is discovered on a defect-rich ultrathin Pd nanosheet catalyst for aqueous CO₂ electroreduction. The pristine nanosheets with dominant (111) facet sites are transformed into crumpled sheet-like structures prevalent in electrocatalytically active (100) sites. The reconstruction increases the density of active sites and reduces the CO binding strength on Pd surfaces, remarkably promoting the CO₂ reduction to CO. A high CO Faradaic efficiency of 93 % is achieved with a site-specific activity of 6.6 mA cm⁻² at a moderate overpotential of 590 mV on the reconstructed 50 nm Pd nanosheets. Experimental and theoretical studies suggest the CO intermediate as a key factor driving the structural transformation during CO₂ reduction. This study highlights the dynamic nature of defective metal nanosheets under reaction conditions and suggests new opportunities in surface engineering of 2D metal nanostructures to tune their electrocatalytic performance.     

Transition Metal Nitrides as Promising Catalyst Supports for Tuning CO/H2 Syngas Production from Electrochemical CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂RR) to produce synthesis gas (syngas) with tunable CO/H₂ ratios has been studied by supporting Pd catalysts on transition metal nitride (TMN) substrates. Combining experimental measurements and density functional theory (DFT) calculations, Pd‐modified niobium nitride (Pd/NbN) is found to generate much higher CO and H₂ partial current densities and greater CO Faradaic efficiency than Pd‐modified vanadium nitride (Pd/VN) and commercial Pd/C catalysts. In‐situ X‐ray diffraction identifies the formation of PdH in Pd/NbN and Pd/C under CO₂RR conditions, whereas the Pd in Pd/VN is not fully transformed into the active PdH phase. DFT calculations show that the stabilized *HOCO and weakened *CO intermediates on PdH/NbN are critical to achieving higher CO₂RR activity. This work suggests that NbN is a promising substrate to modify Pd, resulting in an enhanced electrochemical conversion of CO₂ to syngas with a potential reduction in precious metal loading.     

Pd Nanoparticles Supported on Triangle-Shaped La2O2CO3 Nanosheets: A New Highly Efficient and Durable Catalyst for Selective Hydrogenation of Cinnamaldehyde to Hydrocinnamaldehyde

A catalyst in which Pd nanoparticles are supported on triangle-shaped La₂O₂CO₃ nanosheets exposing predominantly the (001) planes (Pd/La₂O₂CO₃-TNS; where TNS denotes triangular nanosheets) was prepared by a facile solvothermal method. The Pd/La₂O₂CO₃-TNS catalysts exhibited excellent catalytic activity and recycling stability for hydrogenation of cinnamaldehyde to hydrocinnamaldehyde with turnover frequency of up to 41 238 h⁻¹. This enhanced activity of Pd/La₂O₂CO₃-TNS results from strong metal–support interactions. Structure analysis and characterization demonstrated that surface-oxygen-enriched La₂O₂CO₃-TNS supports exposing (001) planes are beneficial to charge transfer between the Pd nanoparticles and triangle-shaped La₂O₂CO₃ nanosheets and increase the electron density of Pd. Moreover, the modulated electronic states of the Pd/La₂O₂CO₃-TNS catalysts can enhance the adsorption and activation of hydrogen to enhance the hydrogenation activity.     

Enhancing Activity and Reducing Cost for Electrochemical Reduction of CO2 by Supporting Palladium on Metal Carbides

Electrochemical CO₂ reduction reaction (CO₂RR) with renewable electricity is a potentially sustainable method to reduce CO₂ emissions. Palladium supported on cost‐effective transition‐metal carbides (TMCs) are studied to reduce the Pd usage and tune the activity and selectivity of the CO₂RR to produce synthesis gas, using a combined approach of studying thin films and practical powder catalysts, in situ characterization, and density functional theory (DFT) calculations. Notably, Pd/TaC exhibits higher CO₂RR activity, stability and CO Faradaic efficiency than those of commercial Pd/C while significantly reducing the Pd loading. In situ measurements confirm the transformation of Pd into hydride (PdH) under the CO₂RR environment. DFT calculations reveal that the TMC substrates modify the binding energies of key intermediates on supported PdH. This work suggests the prospect of using TMCs as low‐cost and stable substrates to support and modify Pd for enhanced CO₂RR activity.     

Oxygen Vacancies in ZnO Nanosheets Enhance CO2 Electrochemical Reduction to CO

As electron transfer to CO₂ is generally considered to be the critical step during the activation of CO₂, it is important to develop approaches to engineer the electronic properties of catalysts to improve their performance in CO₂ electrochemical reduction. Herein, we developed an efficient strategy to facilitate CO₂ activation by introducing oxygen vacancies into electrocatalysts with electronic‐rich surface. ZnO nanosheets rich in oxygen vacancies exhibited a current density of ?16.1 mA cm^?2 with a Faradaic efficiency of 83 % for CO production. Based on density functional theory (DFT) calculations, the introduction of oxygen vacancies increased the charge density of ZnO around the valence band maximum, resulting in the enhanced activation of CO₂. Mechanistic studies further revealed that the enhancement of CO production by introducing oxygen vacancies into ZnO nanosheets originated from the increased binding strength of CO₂ and the eased CO₂ activation.     

2D PbS Nanosheets with Zigzag Edges for Efficient CO2 Photoconversion

The rational design of transition-metal sulfide with two-dimensional (2D) structure and tunable edges on the nanoscale can effectively improve their activity for variously catalytic reactions. Herein, the 2D PbS nanosheets with abundant zigzag edges (e-PbS NS), which exhibited an excellent performance for CO₂ photoconversion to CO, were constructed. The zigzag edges on the PbS NS are beneficial for exposing more active sites and promoting charge separation, thereby accelerating the kinetics process of CO₂ photoreduction. This study provides a strategy to regulate structure with effective edge sites for the CO₂ reduction.     

Kinetic Evidence for the Influence of Subsurface Oxygen on Palladium Surfaces Towards CO Oxidation at High Temperatures

Transient state kinetics of the catalytic oxidation of CO with O₂ on Pd‐surfaces has been measured under isothermal conditions by using a molecular beam approach. Systematic studies were carried out as a function of reaction temperature and CO+O₂ composition. With sufficient kinetic evidence, we have demonstrated the positive influence of subsurface oxygen towards CO‐adsorption and oxidation to CO₂ at high temperatures (600–900 K) on Pd‐surfaces, and the likely electronic nature of the surface changes with oxygen in the subsurface. These studies also provide a direct proof for CO‐adsorption with a significantly reactive sticking coefficient at high temperatures on Pd‐surfaces exhibiting a significant subsurface O‐coverage.     

Geometric stability of PtFe/PdFe embedded in graphene and catalytic activity for CO oxidation

The direct methanol fuel cell (DMFC) is considered as a promising power source, because of its abundant fuel source, high energy density and environmental friendliness. Among DMFC anode materials, Pt and Pt group metals are considered to be the best electrocatalysts. The combination of Pt with some specific transition metal can reduce the cost and improve the tolerance toward CO poisoning of pure Pt catalysts. In this paper, the geometric stabilities of PtFe/PdFe atoms anchored in graphene sheet and catalytic CO oxidation properties were investigated using the density functional theory method. The results show that the Pt (Pd) and Fe atoms can replace C atoms in graphene sheet. The CO oxidation reaction by molecular O₂ on PtFe–graphene and PdFe–graphene was studied. The results show that the Eley–Rideal (ER) mechanism is expected over the Langmuir–Hinshelwood mechanism for CO oxidation on both PtFe–graphene and PdFe–graphene. Further, complete CO oxidation on PtFe–graphene and PdFe–graphene proceeds via a two‐step ER reaction: CO(gas) + O₂(ads) → CO₂(ads) + O(ads) and CO(gas) + O(ads) → CO₂(ads). Our results reveal that PtFe/PdFe commonly embedded in graphene can be used as a catalyst for CO oxidation. The microscopic mechanism of the CO oxidation reaction on the atomic catalysts was explored.     

Unlocking the Electrocatalytic Activity of Antimony for CO2 Reduction by Two‐Dimensional Engineering of the Bulk Material

Two‐dimensional (2D) materials are known to be useful in catalysis. Engineering 3D bulk materials into the 2D form can enhance the exposure of the active edge sites, which are believed to be the origin of the high catalytic activity. Reported herein is the production of 2D “few‐layer” antimony (Sb) nanosheets by cathodic exfoliation. Application of this 2D engineering method turns Sb, an inactive material for CO₂ reduction in its bulk form, into an active 2D electrocatalyst for reduction of CO₂ to formate with high efficiency. The high activity is attributed to the exposure of a large number of catalytically active edge sites. Moreover, this cathodic exfoliation process can be coupled with the anodic exfoliation of graphite in a single‐compartment cell for in situ production of a few‐layer Sb nanosheets and graphene composite. The observed increased activity of this composite is attributed to the strong electronic interaction between graphene and Sb.     

Titanium Carbide (Ti3C2Tx) MXene Ornamented with Palladium Nanoparticles for Electrochemical CO Oxidation

Titanium carbide (Ti₃C₂T_x) MXene possesses various unique physicochemical and catalytic properties. However, the electrochemical CO oxidation performance is not yet addressed experimentally. Herein, Ti₃C₂T_x (T_X=OH, O, and F) ordered and exfoliated two-dimensional nanosheets ornamented with semi-spherical palladium nanoparticles (2.5 Wt. %) with an average diameter of (10±1 nm) (denoted as Pd/Ti₃C₂T_x) is rationally designed for the electrochemical CO oxidation. The fabrication process is based on the selective chemical etching of Ti₃AlC₂ and delamination under sonication to form Ti₃C₂Tx nanosheets that are used as a substrate and reducing agent for supporting in situ growth of Pd nanoparticles via impregnation with Pd salt. Interestingly, Pd-free Ti₃C₂T_x displayed inferior CO oxidation activity, while Pd/Ti₃C₂T_x enhanced the CO oxidation activity substantially. This is attributed to the combination of outstanding physicochemical properties of Ti₃C₂T_x and the catalytic merits of Pd nanoparticles.     

Efficient CO2 Removal for Ultra‐Pure CO Production by Two Hybrid Ultramicroporous Materials

Removal of CO₂ from CO gas mixtures is a necessary but challenging step during production of ultra‐pure CO as processed from either steam reforming of hydrocarbons or CO₂ reduction. Herein, two hybrid ultramicroporous materials (HUMs), SIFSIX‐3‐Ni and TIFSIX‐2‐Cu‐i , which are known to exhibit strong affinity for CO₂, were examined with respect to their performance for this separation. The single‐gas CO sorption isotherms of these HUMs were measured for the first time and are indicative of weak affinity for CO and benchmark CO₂/CO selectivity (>4000 for SIFSIX‐3‐Ni ). This prompted us to conduct dynamic breakthrough experiments and compare performance with other porous materials. Ultra‐pure CO (99.99 %) was thereby obtained from CO gas mixtures containing both trace (1 %) and bulk (50 %) levels of CO₂ in a one‐step physisorption‐based separation process.     

Pebax‐Based Membrane Filled with Two‐Dimensional Mxene Nanosheets for Efficient CO2 Capture

Mixed matrix membranes (MMMs) made from inorganic fillers and polymers is a kind of promising candidate for gas separation. In this work, two‐dimensional MXene nanosheets were synthesized and incorporated into a polyether‐polyamide block copolymer (Pebax) matrix to fabricate MMM for CO₂ capture. The physicochemical properties of MXene nanosheets and MXene/Pebax membranes were studied systematically. The introduction of MXene nanosheets provided additional molecular transport channels and meanwhile enhanced the CO₂ adsorption capacity, thereby enhancing both the CO₂ peremance and CO₂/N₂ selectivity of Pebax membrane. The optimized MXene/Pebax membrane with a MXene loading of 0.15 wt % displayed a high separation performance with a CO₂ permeance of 21.6 GPU and a CO₂/N₂ selectivity of 72.5, showing potential application in CO₂ capture.     

A PCP Pincer Ligand for Coordination Polymers with Versatile Chemical Reactivity: Selective Activation of CO2 Gas over CO Gas in the Solid State

A tetra(carboxylated) PCP pincer ligand has been synthesized as a building block for porous coordination polymers (PCPs). The air‐ and moisture‐stable PCP metalloligands are rigid tetratopic linkers that are geometrically akin to ligands used in the synthesis of robust metal–organic frameworks (MOFs). Here, the design principle is demonstrated by cyclometalation with Pd^IICl and subsequent use of the metalloligand to prepare a crystalline 3D MOF by direct reaction with Co^II ions and structural resolution by single crystal X‐ray diffraction. The Pd?Cl groups inside the pores are accessible to post‐synthetic modifications that facilitate chemical reactions previously unobserved in MOFs: a Pd?CH₃ activated material undergoes rapid insertion of CO₂ gas to give Pd?OC(O)CH₃ at 1 atm and 298 K. However, since the material is highly selective for the adsorption of CO₂ over CO, a Pd?N₃ modified version resists CO insertion under the same conditions.     

Partially Oxidized Palladium Nanodots for Enhanced Electrocatalytic Carbon Dioxide Reduction

Here we report a partially oxidized palladium nanodot (Pd/PdO_x) catalyst with a diameter of around 4.5 nm. In aqueous CO₂‐saturated 0.5 m KHCO₃, the catalyst displays a Faradaic efficiency (FE) of 90 % at −0.55 V vs. reversible hydrogen electrode (RHE) for carbon monoxide (CO) production, and the activity can be retained for at least 24 h. The improved catalytic activity can be attributed to the strong adsorption of CO₂^.− intermediate on the Pd/PdO_x electrode, wherein the presence of Pd²⁺ during the electroreduction reaction of CO₂ may play an important role in accelerating the carbon dioxide reduction reaction (CO₂RR). This study explores the catalytic mechanism of a partially oxidized nanostructured Pd electrocatalyst and provides new opportunities for improving the CO₂RR performance of metal systems.     

First‐principle calculations on CO oxidation catalyzed by a gold nanoparticle

We have elucidated the mechanism of CO oxidation catalyzed by gold nanoparticles through first‐principle density‐functional theory (DFT) calculations. Calculations on selected model show that the low‐coordinated Au atoms of the Au₂₉ nanoparticle carry slightly negative charges, which enhance the O₂ binding energy compared with the corresponding bulk surfaces. Two reaction pathways of the CO oxidation were considered: the Eley–Rideal (ER) and Langmuir–Hinshelwood (LH). The overall LH reaction O_2(ads) + CO_(gas) → O_2(ads) + CO_(ads) → OOCO_(ads) → O_(ads) + CO_2(gas) is calculated to be exothermic by 3.72 eV; the potential energies of the two transition states ( TS_LH1 and TS_LH2 ) are smaller than the reactants, indicating that no net activation energy is required for this process. The CO oxidation via ER reaction Au₂₉ + O_2(gas) + CO_(gas) → Au₂₉–O_2(ads) + CO_(gas) → Au₂₉–CO_3(ads) → Au₂₉–O_(ads) + CO_2(gas) requires an overall activation barrier of 0.19 eV, and the formation of Au₂₉–CO_3(ads) intermediate possesses high exothermicity of 4.33 eV, indicating that this process may compete with the LH mechanism. Thereafter, a second CO molecule can react with the remaining O atom via the ER mechanism with a very small barrier (0.03 eV). Our calculations suggest that the CO oxidation catalyzed by the Au₂₉ nanoparticle is likely to occur at or even below room temperature. To gain insights into high‐catalytic activity of the gold nanoparticles, the interaction nature between adsorbate and substrate is also analyzed by the detailed electronic analysis. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Tailoring Copper Nanocrystals towards C2 Products in Electrochemical CO2 Reduction

Favoring the CO₂ reduction reaction (CO2RR) over the hydrogen evolution reaction and controlling the selectivity towards multicarbon products are currently major scientific challenges in sustainable energy research. It is known that the morphology of the catalyst can modulate catalytic activity and selectivity, yet this remains a relatively underexplored area in electrochemical CO₂ reduction. Here, we exploit the material tunability afforded by colloidal chemistry to establish unambiguous structure/property relations between Cu nanocrystals and their behavior as electrocatalysts for CO₂ reduction. Our study reveals a non‐monotonic size‐dependence of the selectivity in cube‐shaped copper nanocrystals. Among 24 nm, 44 nm and 63 nm cubes tested, the cubes with 44 nm edge length exhibited the highest selectivity towards CO2RR (80 %) and faradaic efficiency for ethylene (41 %). Statistical analysis of the surface atom density suggests the key role played by edge sites in CO2RR.     

Formation of Hierarchical FeCoS2–CoS2 Double‐Shelled Nanotubes with Enhanced Performance for Photocatalytic Reduction of CO2

Hierarchical FeCoS₂–CoS₂ double‐shelled nanotubes have been rationally designed and constructed for efficient photocatalytic CO₂ reduction under visible light. The synthetic strategy, engaging the two‐step cation‐exchange reactions, precisely integrates two metal sulfides into a double‐shelled tubular heterostructure with both of the shells assembled from ultrathin two‐dimensional (2D) nanosheets. Benefiting from the distinctive structure and composition, the FeCoS₂–CoS₂ hybrid can reduce bulk‐to‐surface diffusion length of photoexcited charge carriers to facilitate their separation. Furthermore, this hybrid structure can expose abundant active sites for enhancing CO₂ adsorption and surface‐dependent redox reactions, and harvest incident solar irradiation more efficiently by light scattering in the complex interior. As a result, these hierarchical FeCoS₂–CoS₂ double‐shelled nanotubes exhibit superior activity and high stability for photosensitized deoxygenative CO₂ reduction, affording a high CO‐generating rate of 28.1 μmol h^?1 (per 0.5 mg of catalyst).     

Exclusive Formation of Formic Acid from CO2 Electroreduction by a Tunable Pd‐Sn Alloy

Conversion of carbon dioxide (CO₂) into fuels and chemicals by electroreduction has attracted significant interest, although it suffers from a large overpotential and low selectivity. A Pd‐Sn alloy electrocatalyst was developed for the exclusive conversion of CO₂ into formic acid in an aqueous solution. This catalyst showed a nearly perfect faradaic efficiency toward formic acid formation at the very low overpotential of −0.26 V, where both CO formation and hydrogen evolution were completely suppressed. Density functional theory (DFT) calculations suggested that the formation of the key reaction intermediate HCOO* as well as the product formic acid was the most favorable over the Pd‐Sn alloy catalyst surface with an atomic composition of PdSnO₂, consistent with experiments.