CompassR Yields Highly Organic-Solvent-Tolerant Enzymes through Recombination of Compatible Substitutions

The CompassR (computer-assisted recombination) rule enables, among beneficial substitutions, the identification of those that can be recombined in directed evolution. Herein, a recombination strategy is systematically investigated to minimize experimental efforts and maximize possible improvements. In total, 15 beneficial substitutions from Bacillus subtilis lipase A (BSLA), which improves resistance to the organic cosolvent 1,4-dioxane (DOX), were studied to compare two recombination strategies, the two-gene recombination process (2GenReP) and the in silico guided recombination process (InSiReP), employing CompassR. Remarkably, both strategies yielded a highly DOX-resistant variant, M4 (I12R/Y49R/E65H/N98R/K122E/L124K), with up to 14.6-fold improvement after screening of about 270 clones. M4 has a remarkably enhanced resistance in 60 % (v/v) acetone (6.0-fold), 30 % (v/v) ethanol (2.1-fold), and 60 % (v/v) methanol (2.4-fold) compared with wild-type BSLA. Molecular dynamics simulations revealed that attracting water molecules by charged surface substitutions is the main driver for increasing the DOX resistance of BSLA M4. Both strategies and obtained molecular knowledge can likely be used to improve the properties of other enzymes with a similar α/β-hydrolase fold.     

Exceptional Crystallization Diversity and Solid‐State Conversions of CdII Coordination Frameworks with 5‐Bromonicotinate Directed by Solvent Media

A series of nine coordination polymers {[Cd(L)₂(solvent)_x](solvent)_y}_n have been prepared from Cd(NO₃)₂ and 5‐bromonicotinic acid (HL) in different solvents through a layered diffusion method. By using CH₃OH/H₂O at different volume ratios of 1:1 and 1:3, a one‐dimensional (1D) coordination species ( 1 a ) and a three‐dimensional (3D) (3,6)‐connected framework ( 2 a?g₁ ) can be obtained. A similar self‐assembly process in C₂H₅OH/H₂O or H₂O/1,4‐dioxane gives 2 a?g₂ or 2 a?g₃ , which are isomorphic to 2 a?g₁ but with different lattice solvents. Replacement of the mixed solvents with DMF/H₂O (v/v 1:1 or 1:3) also gives a 1D chain complex ( 1 b ) or a 3D microporous framework ( 2 b?g₁ ). Similarly, MOF 2 b?g₂ can be assembled from CH₃CN/H₂O as an isomorphic solvate of 2 b?g₁ . Significantly, the 3D MOF families of 2 a?g _n and 2 b?g _n are supramolecular isomers even though they are topologically equivalent. Also, if a mixture of CH₃OH/CH₂Cl₂ (v/v 1:1 or 3:1) is used, a pair of distinct MOFs ( 3 a?g ) and ( 3 b ) are generated as pseudo‐polymorphs that show a two‐dimensional (2D) sheet and a 3D coordination framework, respectively. Furthermore, mutual solvent‐induced conversions were realized between 1 a and 1 b and between 2 a?g₁ , 2 a?g₂ , and 2 a?g₃ following the size‐dependent rule of the solvent. These results are of great significance in recognizing the solvent effect upon coordination assemblies and their crystal transformations.     

Isotope and Surface Temperature Effects for Hydrogen Recombination on a Graphite Surface

We highlight the isotope and surface temperature effects for hydrogen atom recombination on a graphite surface. The reaction dynamics is studied using the semiclassical collisional method, according to which the mass and temperature effects are due to the coupling between the H/D dynamics and the dynamics of the phonon excitation/de‐excitation mechanism of the substrate. All possible collisional schemes with H/D adsorbed on the surface and H/D impinging from the gas phase are considered. In particular, we focus on the recombination reaction between an H atom colliding with a D atom adsorbed on the surface and a D atom incident on an H adatom. For H₂ and D₂ formation, the surface temperature effect is investigated by comparing the results obtained for T_S=800 K with those obtained at T_S=500 K and T_S=100 K. Despite the low masses involved in the dynamics, effective isotope and temperature effects were observed on the recombination probabilities, reaction energetics, and roto‐vibrational states of formed molecules. The results show the need for correct treatment of the multiphonon excitation mechanism in molecule–surface interactions.     

High‐performance countercurrent chromatography separation of Peucedanum cervaria fruit extract for the isolation of rare coumarin derivatives

For the first time, rare major and minor compounds from fruits of Peucedanum cervaria were isolated. High‐performance countercurrent chromatography with two different solvent systems, heptane/ethyl acetate/methanol/water (3:2:3:2 and 2:1:2:1, v/v), was successfully used in the reversed‐phase mode. A scale‐up process from analytical to semipreparative in a very short time was developed. The structures of isolated compounds were evaluated by high‐performance liquid chromatography with diode array detection and electrospray ionization mass spectrometry, gas chromatography with mass spectrometry, and one‐ and two‐dimensional NMR spectroscopy. (8S,9R)‐9‐(3‐Methylbutenoyloxy)‐O‐acetyl‐8,9‐dihydrooroselol (compound B), (8S,9R)‐9‐(2‐methyl‐Z‐butenoyloxy)‐O‐acetyl‐8,9‐dihydrooroselol (edultin, compound C), and (8S,9R)‐9‐acetoxy‐O‐(2α‐methylbutyryl)‐8,9‐dihydrooroselol (compound D) were obtained using heptane/ethyl acetate/methanol/water (2:1:2:1, v/v) in <40 min. The method yielded 4.6 mg of a mixture of compounds B and C (11:89) and 3.7 mg of compound D. These amounts were obtained from the crude extract (0.5 g) in a single run. Although the compounds are known, their isolation by countercurrent chromatography and the analysis of their relative stereochemistry by two‐dimensional NMR spectroscopy have been performed for the first time. Additionally, heptane/ethyl acetate/methanol/water (3:2:3:2, v/v) led to the isolation of oxypeucedanin (1.2 mg; compound A). This is the first time that angular dihydrofuranocoumarin was isolated from plant extract by countercurrent chromatography.     

Enzymatic transformation of platycosides and one‐step separation of platycodin D by high‐speed countercurrent chromatography

Platycosides, the saponins found in the roots of Platycodon grandiflorum (Platycodi Radix), are typically composed of oleanane triterpenes with two side chains. In platycosides, platycodin D, a glucose unit at C‐3, is a major component, which has several pharmacological activities. Because of the high demand for this compound, we attempted to enzymatically convert platycodin D₃ and platycoside E, having two and three glucose units at C‐3, respectively, into platycodin D. In this study, we tested the ability of several glycosidases to transform platycosides, or more specifically, the ability to transform platycoside E and platycodin D₃ into platycodin D. To obtain pure platycodin D on a preparative scale, high‐speed countercurrent chromatography with a solvent system of ethyl acetate/n‐butanol/water (1.2:1:2, v/v/v) was used for the separation of the enzymatically transformed product. Approximately 39.4 mg of platycodin D (99.8% purity) was obtained from 200 mg of the product in a one‐step separation. The results strongly support the advantage of enzymatic transformation of the platycosides for the efficient enrichment of platycodin D in the complicated extract of the medicinal plant.     

Helix-sense-selective polymerization of phenyl[bis(2-pyridyl)]methyl methacrylate and chiral recognition ability of the polymer

A novel monomer, phenyl[bis(2-pyridyl)]methyl methacrylate (PB2PyMA), was synthesized. The solvolysis rate of PB2PyMA measured in CDCl₃–CD₃ OD [1/1 (v/v)] by ¹H-NMR spectroscopy at 35°C was much smaller than those of triphenylmethyl methacrylate (TrMA) and diphenyl-2-pyridylmethyl methacrylate (D2PyMA). PB2PyMA was anionically polymerized with the complexes of organolithiums with (?)-sparteine (Sp), (S,S)-(+)-and (R,R)?(-)-2,3-dimethoxy-1,4-bis(dimethylamino)butanes[(+)-and (?) -DDB], and (S)-(+)-1-(2-pyrrolidinylmethyl) pyrrolidine (PMP) in toluene at low temperature. The polymers obtained with Sp and DDB complexes showed low optical activity. PMP complexes, particularly that with N,N′-diphenylethylenediamine monolithium amide, were effective in synthesizing a polymer of high optical rotation ([α]²⁵₃₆₅ ～ +1350°) which was comparable to those of poly(TrMA) and poly(D2PyMA) with one-handed helical structure. The optical rotation of poly(PB2PyMA) in a mixture of CHCl₃ and 2,2,2-trifluoroethanol (9/1, v/v) slowly decreased with time. Optically active poly(PB2PyMA) coated on macroporous silica gel was able to resolve racemic compounds as a chiral stationary phase for high-performance liquid chromatography. © 1993 John Wiley & Sons, Inc.     

Accurate electrical and spectroscopic properties ofX 1Σ+ BeO from coupled-cluster methods

Summary This paper reports a series of coupled-cluster (CC) calculations through CCSDT on the theoretically challenging ground state of the BeO molecule. Along with CC methods, quadratic configuration interaction (QCI) approximations to CC theory have been used (QCISD and QCISD(T)), which show several dramatic failings. Equilibrium electrical properties (, _xx , and _zz ) and basic spectroscopic properties (r _e, _e,D _e, and infrared intensity (I)) have been computed. Basis set and electron correlation effects are analyzed in order to arrive at accurate values of the dipole moment and polarizability, which are not known experimentally. For the dipole moment, we obtain a value of 6.25 D, with an uncertainty of about 0.1 D. For _xx and _zz , we suggest respective values of 32 and 36 atomic units (a.u.) and error bars of about 1 and 2 a.u. With extended basis sets, the spectroscopic propertiesr _e, _e, andD _e are reproduced to high accuracy, which is the first time this has been achieved for this species byab initio methods. At the highest calculation levels,I is predicted to be very small. AlthoughI has not been measured, some support for this prediction comes from a recent infrared study of BeO-rare gas complexes. The QCI methods are shown to be much more sensitive to basis set, and even with large basis sets yield values of _zz andI which differ from CC results by an order of magnitude and three orders of magnitude, respectively. These differences doubtless arise from the importance of single excitations (T ₁) for this molecule, as several terms involvingT ₁ are neglected in the QCISD approximation compared with CCSD. We also report CC calculations with Brueckner orbitals, which yield results similar to those obtained with restricted Hartree-Fock orbitals.     

Enhanced efficiency of ternary organic solar cells by doping a polymer material in P3HT:PC61BM

Doping a low‐bandgap polymer material (PDTBDT‐DTNT) as a complementary electron donor in poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁‐butyricacid methyl ester (PC₆₁BM) blend is experimented to improve the power conversion efficiency (PCE) of organic solar cells (OSCs). The PCE of OSCs was increased from 3.19% to 3.75% by doping 10 wt% PDTBDT‐DTNT, which was 17.55% higher than that of the OSCs based on binary blend of P3HT:PC₆₁BM (host cells). The short‐circuit current density (J_sc) was increased to 10.11 mA·cm⁻² compared with the host cells. Although the PCE improvement could partly be attributed to more photon harvest for complementary absorption of 2 donors by doping appropriate PDTBDT‐DTNT, the promotion of charge separation and transport as well as the suppression of charge recombination due to a matrix of cascade energy levels is also important. And the better morphology of the active layer films is beneficial to the optimized performance of ternary devices.     

Tripyridine‐Derivative‐Derived Semiconducting Iodo‐Argentate/Cuprate Hybrids with Excellent Visible‐Light‐Induced Photocatalytic Performance

Through regulating the pH values, a series of iodo‐argentate/cuprate hybrids, [Me₃(4‐TPT)]₄[Ag₆I₁₈] ( 1 , Me₃(4‐TPT)=N,N′,N′′‐trimethyl‐2,4,6‐tris(4‐pyridyl)‐1,3,5‐triazine), [Me₃(4‐TPT)][M₅I₈] (M=Ag/ 2 , Cu/ 2 a ), [Me₃(3‐TPT)][M₅I₈] (Me₃(3‐TPT)=N,N′,N′′‐trimethyl‐2,4,6‐tris(3‐pyridyl)‐1,3,5‐triazine, M=Ag/ 3 , Cu/ 4 ), which exhibit adjustable structural variations with different dimensional structures, have been obtained under solvothermal conditions. They are directed by two types of in situ N‐alkylation TPT‐derivatives (Me₃(4‐TPT) for 1 / 2 / 2 a and Me₃(3‐TPT) for 3 / 4 ) and represent the isolated units ( 1 ), 1D polymeric chain ( 4 ), 2D layered structures ( 2 / 2 a , 3 ) based on diverse metal iodide clusters. These compounds possess reducing band gaps as compared with the bulk β‐AgI and CuI and belong to potential semiconductor materials. Iodocuprates feature highly efficient photocatalytic activity in the sunlight‐induced degradation of organic dyes. The detailed study on the possible photocatalytic mechanism, including radical trapping tests and theoretical calculations, reveals that the N‐alkylation TPT moieties contribute to the narrow semiconducting behavior and effectively inhibit the recombination of photogenerated electron‐hole pairs, which result in an excellent visible‐light‐induced photocatalytic performance.     

Automated solid‐phase extraction of phenolic acids using layered double hydroxide–alumina–polymer disks

The application of layered double hydroxide–Al₂O₃–polymer mixed‐matrix disks for solid‐phase extraction is reported for the first time. Al₂O₃ is embedded in a polymer matrix followed by an in situ metal‐exchange process to obtain a layered double hydroxide–Al₂O₃–polymer mixed‐matrix disk with excellent flow‐through properties. The extraction performance of the prepared disks is evaluated as a proof of concept for the automated extraction using sequential injection analysis of organic acids (p‐hydroxybenzoic acid, 3,4‐dihydroxybenzoic acid, gallic acid) following an anion‐exchange mechanism. After the solid‐phase extraction, phenolic acids were quantified by reversed‐phase high‐performance liquid chromatography with diode‐array detection using a core–shell silica–C18 stationary phase and isocratic elution (acetonitrile/0.5% acetic acid in pure water, 5:95, v/v). High sensitivity and reproducibility were obtained with limits of detection in the range of 0.12–0.25 μg/L (sample volume, 4 mL), and relative standard deviations between 2.9 and 3.4% (10 μg/L, n = 6). Enrichment factors of 34–39 were obtained. Layered double hydroxide–Al₂O₃–polymer mixed‐matrix disks had an average lifetime of 50 extractions. Analyte recoveries ranged from 93 to 96% for grape juice and nonalcoholic beer samples.     

Boosting Charge Transport in a 2D/3D Perovskite Heterostructure by Selecting an Ordered 2D Perovskite as the Passivator

We demonstrate that an ordered 2D perovskite can significantly boost the photoelectric performance of 2D/3D perovskite heterostructures. Using selective fluorination of phenyl-ethyl ammonium (PEA) lead iodide to passivate 3D FA_0.8Cs_0.2PbI₃, we find that the 2D/3D perovskite heterostructures passivated by a higher ordered 2D perovskite have lower Urbach energy, yielding a remarkable increase in photoluminescence (PL) intensity, PL lifetime, charge-carrier mobilities (ϕμ), and carrier diffusion length (L_D) for a certain 2D perovskite content. High performance with an ultralong PL lifetime of ≈1.3 μs, high ϕμ of ≈18.56 cm² V⁻¹ s⁻¹, and long L_D of ≈7.85 μm is achieved in the 2D/3D films when passivated by 16.67 % para-fluoro-PEA₂PbI₄. This carrier diffusion length is comparable to that of some perovskite single crystals (>5 μm). These findings provide key missing information on how the organic cations of 2D perovskites influence the performance of 2D/3D perovskite heterostructures.     

Basicity of some aliphatic amines in mixed H2O?CH3CN solvents

The values of pK_a^ms (K_a^ms represents ionization constant of conjugate acid of amine base in mixed water–acetonitrile solvent) for all amines, except for charged amine bases, show a mild decrease (ca. 0.1–0.4 pK units) with the increase in CH₃CN content from 2 to ∼60% v/v. However, the pK_a^ms values at 70% v/v CH₃CN become nearly equal or slightly larger (by ≤0.7 pK units) than the corresponding pK_a^ms at 2% v/v CH₃CN for all neutral and charged amines. The values of pK_a^ms for phenol increase from 10.17 to 13.38 with the increase in the content of CH₃CN from 2 to 70% v/v in mixed aqueous solvent. Taft reaction constants, ρ*, obtained from the plots of pK_a^ms against ∑σ* for primary and secondary amines decrease by ca. 0.8 ρ* units with the increase in the CH₃CN content from 2 to 70% v/v. The values of pK_a^ms show an empirical linear relationship with the corresponding values of pK_a^w (where pK_a^w represents the pK_a obtained in aqueous solvent containing 2% v/v CH₃CN), which allows the estimation of a pK_a in mixed H₂O CH₃CN solvents from that in water. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 146–152, 2000     

Cellulose tris‐(3,5‐dimethylphenylcarbamate)‐based chiral stationary phase for the enantioseparation of drugs in supercritical fluid chromatography: comparison with HPLC

A cellulose tris‐(3,5‐dimethylphenylcarbamate)‐based chiral stationary phase was studied as a tool for the enantioselective separation of 21 selected analytes with different pharmaceutical and physicochemical properties. The enantioseparations were performed using supercritical fluid chromatography. The effect of the mobile phase composition was studied. Four different additives (diethylamine, triethylamine, isopropylamine, and trifluoroacetic acid) and isopropylamine combined with trifluoroacetic acid were tested and their influence on enantioseparation was compared. The influence of two different mobile phase co‐solvents (methanol and propan‐2‐ol) combined with all the additives was also evaluated. The best mobile phase compositions for the separation of the majority of enantiomers were CO₂/methanol/isopropylamine 80:20:0.1 v/v/v or CO₂/propan‐2‐ol/isopropylamine/trifluoroacetic acid 80:20:0.05:0.05 v/v/v/v. The best results were obtained from the group of basic β‐blockers. A high‐performance liquid chromatography separation system composed of the same stationary phase and mobile phase of similar properties prepared as a mixture of hexane/propan‐2‐ol/additive 80:20:0.1 v/v/v was considered for comparison. Supercritical fluid chromatography was found to yield better results, i.e. better enantioresolution for shorter analysis times than high‐performance liquid chromatography. However, examples of enantiomers better resolved under the optimized conditions in high‐performance liquid chromatography were also found.     

On the Structural Chemistry of γ‐Brasses: Two Different Interpenetrating Networks in Ternary F‐Cell Pd–Zn–Al Phases

Novel ternary phases, (Pd_1?xZn_x)₁₈(Zn_1?yAl_y)_86?δ (0≤x≤0.162, 0.056≤y≤0.088, 0≤δ≤4), which adopt a superstructure of the γ‐brass type (called γ′‐brass), have been synthesized from the elements at 1120 K. Single‐crystal X‐ray structural analysis reveals a phase width (F$\bar 4$ 3m, a=18.0700(3)–18.1600(2) Å, Pearson symbols cF400–cF416), which is associated with structural disorder based on both vacancies as well as mixed site occupancies. These structures are constructed of four independent 26‐atom γ‐clusters per primitive unit cells and centered at the four special positions A (0, 0, 0), B (1/4, 1/4, 1/4), C (1/2, 1/2, 1/2) and D (3/4, 3/4, 3/4). Two of these, centered at B and C , are completely ordered Pd₄Zn₂₂ clusters, whereas the other two, centered at A and D , contain all structural disorder in the system. According to our single‐crystal X‐ray results, Al substitutions are restricted to the A ‐ and D ‐centered clusters. Moreover, the outer tetrahedron (OT) site of the 26‐atom cluster at D is completely vacant at the Al‐rich boundary of these phases. Electronic structure calculations, using the tight‐binding linear muffin‐tin orbital atomic‐spheres approximation (TB‐LMTO‐ASA) method, on models of these new, ternary γ′‐brass phases indicate that the observed chemical compositions and atomic distributions lead to the presence of a pseudogap at the Fermi level in the electronic density of states curves, which is consistent with the Hume‐Rothery interpretation of γ‐brasses, in general.     

Large‐scale separation of antipsychotic alkaloids from Rauwolfia tetraphylla L. by pH‐zone‐refining fast centrifugal partition chromatography

pH‐zone‐refining centrifugal partition chromatography was successively applied in the large‐scale separation of close R_f antipsychotic indole alkaloids directly from CHCl₃ fraction of Rauwolfia tetraphylla leaves. Two experiments with increasing mass from 500 mg to 3 g of crude alkaloid extracts ( 1 C) of R. tetraphylla were carried out in normal‐displacement mode using a two‐phase solvent system composed of methyl tert‐butyl ether/ACN/water (4:1:5, v/v/v) where HCl (12 mM) was added to the lower aqueous stationary phase as a retainer and triethylamine (5 mM) to the organic mobile phase as an eluter. The two centrifugal partition chromatography separations afforded a total of 162.6 mg of 10‐methoxytetrahydroalstonine ( 1 ) and 296.5 mg of isoreserpiline ( 2 ) in 97% and 95.5% purity, respectively, along with a 400.9 mg mixture of α‐yohimbine and reserpiline ( 3 and 4 ). Further, this mixture was resolved over medium pressure LC using TLC grade silica gel H (average particle size 10 μm), which afforded 160.4 mg of α‐yohimbine ( 3) and 150.2 mg of reserpiline ( 4) in >95% purities. The purity of the isolated antipsychotic alkaloids was analyzed by high‐performance LC and their structures were characterized on the basis of their 1D, 2D NMR and electrospray ionization‐mass spectroscopic data.     

The CO Photodissociation and Recombination Dynamics of the W172Y/F282T Ligand Channel Mutant of Rhodobacter sphaeroides aa3 Cytochrome c Oxidase

In the ligand channel of the cytochrome c oxidase from Rhodobacter sphaeroides (Rs aa₃) W172 and F282 have been proposed to generate a constriction that may slow ligand access to and from the active site. To explore this issue, the tryptophan and phenylalanine residues in Rs aa₃ were mutated to the less bulky tyrosine and threonine residues, respectively, which occupy these sites in Thermus thermophilus (Tt) ba₃ cytochrome oxidase. The CO photolysis and recombination dynamics of the reduced wild‐type Rs aa₃ and the W172Y/F282T mutant were investigated using time‐resolved optical absorption spectroscopy. The spectral changes associated with the multiple processes are attributed to different conformers. The major CO recombination process (44 μs) in the W172Y/F282T mutant is ~500 times faster than the predominant CO recombination process in the wild‐type enzyme (~23 ms). Classical dynamic simulations of the wild‐type enzyme and double mutant showed significant structural changes at the active site in the mutant, including movement of the heme a₃ ring‐D propionate toward Cu_B and reduced binuclear center cavity volume. These structural changes effectively close the ligand exit pathway from the binuclear center, providing a basis for the faster CO recombination in the double mutant.     

Undoped Layered Perovskite Oxynitride Li2LaTa2O6N for Photocatalytic CO2 Reduction with Visible Light

Oxynitrides are promising visible‐light‐responsive photocatalysts, but their structures are almost confined with three‐dimensional (3D) structures such as perovskites. A phase‐pure Li₂LaTa₂O₆N with a layered perovskite structure was successfully prepared by thermal ammonolysis of a lithium‐rich oxide precursor. Li₂LaTa₂O₆N exhibited high crystallinity and visible‐light absorption up to 500 nm. As opposed to well‐known 3D oxynitride perovskites, Li₂LaTa₂O₆N supported by a binuclear Ru^II complex was capable of stably and selectively converting CO₂ into formate under visible light (λ>400 nm). Transient absorption spectroscopy indicated that, as compared to 3D oxynitrides, Li₂LaTa₂O₆N possesses a lower density of mid‐gap states that work as recombination centers of photogenerated electron/hole pairs, but a higher density of reactive electrons, which is responsible for the higher photocatalytic performance of this layered oxynitride.     

Intertwined Titanium Carbide MXene within a 3 D Tangled Polypyrrole Nanowires Matrix for Enhanced Supercapacitor Performances

The exploration of the rational design and synthesis of unique and robust architectured electrodes for the high capacitance, rate capability, and stability of supercapacitors is crucial to the future of energy storage technology. Herein, an in situ synthesis of multilayered titanium carbide MXene tightly caging within a 3 D conducting tangled polypyrrole (PPy) nanowire (NW) network is proposed as an effective strategy to prevent the aggregation of MXene, profoundly enhancing the electrochemical performance of the supercapacitor. Owing to the beneficial effects of an ideal 3 D interconnected porous structure and high electrical conductivity, the obtained electrode exhibits fast charge and ion transport kinetics as well as full usage of active material. As expected, the 3 D Ti₃C₂T_x@PPY NW exhibits a specific capacitance five times higher than that of pristine MXene (610 F g⁻¹), a good rate capability up to a current density of 25 A g⁻¹, and excellent stability with 100 % retention after 14 000 cycles at 4 A g⁻¹, outperforming the known state-of-the-art MXene-based supercapacitor. Our work provides a facile method for enhancing the performance of MXene-based energy storage devices.     

A rationally designed two-dimensional MoSe2/Ti2CO2 heterojunction for photocatalytic overall water splitting: simultaneously suppressing electron–hole recombination and photocorrosion

Electron–hole recombination and photocorrosion are two challenges that seriously limit the application of two-dimensional (2D) transition metal dichalcogenides (TMDs) for photocatalytic water splitting. In this work, we propose a 2D van der Waals MoSe₂/Ti₂CO₂ heterojunction that features promising resistance to both electron–hole recombination and photocorrosion existing in TMDs. By means of first-principles calculations, the MoSe₂/Ti₂CO₂ heterojunction is demonstrated to be a direct Z-scheme photocatalyst for overall water splitting with MoSe₂ and Ti₂CO₂ serving as photocatalysts for hydrogen and oxygen evolution reactions, respectively, which is beneficial to electron–hole separation. The ultrafast migration of photo-generated holes from MoSe₂ to Ti₂CO₂ as well as the anti-photocorrosion ability of Ti₂CO₂ are responsible for photocatalytic stability. This heterojunction is experimentally reachable and exhibits a high solar-to-hydrogen efficiency of 12%. The strategy proposed here paves the way for developing 2D photocatalysts for water splitting with high performance and stability in experiments.

The two challenges of electron–hole recombination and photocorrosion for two-dimensional transition metal dichalcogenides in the application of photocatalytic water splitting are simultaneously suppressed by rational design of heterojunctions.     

Separation and purification of five alkaloids from Aconitum duclouxii by counter‐current chromatography

C₁₉‐diterpenoid alkaloids are the main components of Aconitum duclouxii Levl. The process of separation and purification of these compounds in previous studies was tedious and time consuming, requiring multiple chromatographic steps, thus resulted in low recovery and high cost. In the present work, five C₁₉‐diterpenoid alkaloids, namely, benzoylaconine ( 1 ), N‐deethylaconitine ( 2 ), aconitine ( 3 ), deoxyaconitine ( 4 ), and ducloudine A ( 5 ), were efficiently prepared from A. duclouxii Levl (Aconitum L.) by ethyl acetate extraction followed with counter‐current chromatography. In the process of separation, the critical conditions of counter‐current chromatography were optimized. The two‐phase solvent system composed of n‐hexane/ethyl acetate/methanol/water/NH₃·H₂O (25%) (1:1:1:1:0.1, v/v) was selected and 148.2 mg of 1 , 24.1 mg of 2 , 250.6 mg of 3 , 73.9 mg of 4, and 31.4 mg of 5 were obtained from 1 g total Aconitum alkaloids extract, respectively, in a single run within 4 h. Their purities were found to be 98.4, 97.2, 98.2, 96.8, and 96.6%, respectively, by ultra‐high performance liquid chromatography analysis. The presented separation and purification method was simple, fast, and efficient, and the obtained highly pure alkaloids are suitable for biochemical and toxicological investigation.