Stability-Indicating Chromatographic Methods for Simultaneous Determination of Mosapride and Pantoprazole in Pharmaceutical Dosage Form and Plasma Samples

Simple, sensitive, selective, precise, and stability-indicating thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC) methods for the determination of mosapride and pantoprazole in pharmaceutical tablets were developed and validated as per the International Conference on Harmonization guidelines. The TLC method employs aluminum TLC plates precoated with silica gel 60F₂₅₄ as the stationary phase and ethyl acetate/methanol/toluene (4:1:2, v/v/v) as the mobile phase to give compact spots for mosapride (R _f 0.73) and pantoprazole (R _f 0.45) separated from their degradation products; the chromatogram was scanned at 276 nm. The HPLC method utilizes a C18 column and a mobile phase consisting of acetonitrile/methanol/20 mM ammonium acetate (4:2:4, v/v/v) at a flow rate of 1.0 mL min⁻¹ for the separation of mosapride (t _R 11.4) and pantoprazole (t _R 4.4) from their degradation products. Quantitation was achieved with UV detection at 280 nm. The same HPLC method was successfully used in performing calibrations in lower concentration ranges for both drugs in human plasma using ezetimibe as internal standard. The methods were validated in terms of accuracy, precision, linearity, limits of detection, and limits of quantification. Mosapride and pantoprazole were exposed to acid hydrolysis and then analyzed by the proposed methods. As the methods could effectively separate the drugs from their degradation products, these techniques can be employed as stability-indicating methods that have been successively applied to pharmaceutical formulations without interference from the excipients. Moreover the HPLC method was successfully used in the determination of both drugs in spiked human plasma.

     

Stability-Indicating Chromatographic Methods for Simultaneous Determination of Mosapride and Pantoprazole in Pharmaceutical Dosage Form and Plasma Samples

Simple, sensitive, selective, precise, and stability-indicating thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC) methods for the determination of mosapride and pantoprazole in pharmaceutical tablets were developed and validated as per the International Conference on Harmonization guidelines. The TLC method employs aluminum TLC plates precoated with silica gel 60F₂₅₄ as the stationary phase and ethyl acetate/methanol/toluene (4:1:2, v/v/v) as the mobile phase to give compact spots for mosapride (R _f 0.73) and pantoprazole (R _f 0.45) separated from their degradation products; the chromatogram was scanned at 276 nm. The HPLC method utilizes a C18 column and a mobile phase consisting of acetonitrile/methanol/20 mM ammonium acetate (4:2:4, v/v/v) at a flow rate of 1.0 mL min^?1 for the separation of mosapride (t _R 11.4) and pantoprazole (t _R 4.4) from their degradation products. Quantitation was achieved with UV detection at 280 nm. The same HPLC method was successfully used in performing calibrations in lower concentration ranges for both drugs in human plasma using ezetimibe as internal standard. The methods were validated in terms of accuracy, precision, linearity, limits of detection, and limits of quantification. Mosapride and pantoprazole were exposed to acid hydrolysis and then analyzed by the proposed methods. As the methods could effectively separate the drugs from their degradation products, these techniques can be employed as stability-indicating methods that have been successively applied to pharmaceutical formulations without interference from the excipients. Moreover the HPLC method was successfully used in the determination of both drugs in spiked human plasma.     

Development of stability-indicating method for separation and characterization of benidipine forced degradation products using LC–MS/MS

The present study describes forced degradation of benidipine (BEN) as per  Q1A (R2) and Q1B guidelines of the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use. BEN degraded under hydrolysis (neutral, acidic, and alkaline), hydrogen peroxide induced oxidation, and UV light mediated photolytic degradation. A total of 14 degradation products (DPs) were found in all degradation studies, comprising 4 hydrolytic DPs, 8 oxidative DPs, and 4 photolytic DPs. A selective stability-indicating method was developed using an XBridge BEH C18 column with gradient elution program consisting of ammonium acetate (10 mM, 4.8 pH, acetic acid) and acetonitrile. The flow rate was maintained at 1 ml min⁻¹. All DPs were separated well using the developed HPLC method and were characterized using LC–MS/MS data. As this method is effective in identifying and separating BEN and its DPs with sufficient resolution, it can be used in laboratories for quality control of drugs in daily routine analysis and stability studies.     

Stability-indicating RP-HPLC method for simultaneous quantitation of tramadol and aceclofenac in presence of their major degradation products: Method development and validation

Primary objective of this study was to develop a stability-indicating reverse-phase high-performance liquid chromatography (HPLC) method for simultaneous quantitation of tramadol and aceclofenac in presence of their degradation products. The drugs were subjected to various International Conference on Harmonization recommended stress conditions, such as acid hydrolysis, alkaline hydrolysis, peroxide oxidation, thermolysis, and photolysis. The major degradation products got well resoluted from the analytes in HPLC analysis with a mobile phase composed of a mixture of 0.01?M ammonium acetate buffer (pH 6.5) and acetonitrile (65:35, v/v) through a Phenomenex Gemini C18 (250?mm?×?4.6?mm, 5?µm particle size) column. The method was linear over a range of 15–60?µg/mL for tramadol and 40–160?µg/mL for aceclofenac concentration. The analytes were detected at a wavelength of 270?nm. The method was validated and found to be specific, accurate, precise, stable, and robust for its intended use. The method can be recommended for its future use in routine quality control, accelerated and real-time stability analysis of the formulations containing tramadol and aceclofenac combination.     

Separation and Characterization of New Forced Degradation Products of Macitentan: A Dual Endothelin Receptor Antagonist

Macitentan (MCT) is an endothelin receptor antagonist used for the treatment of pulmonary arterial hypertension. In the present study, MCT was subjected to forced degradation as per ICH guidelines. The drug degraded extensively in acidic, basic as well as neutral hydrolytic conditions and seven degradation products (DPs) were formed. All these DPs were selectively separated using high-performance liquid chromatography (HPLC) with a stationary phase of Inertsil C₁₈ column (150 × 4.6 mm, 5 μm) and a mobile phase consisting of gradient mixture of 0.02% trifluoroacetic acid (TFA) and acetonitrile (ACN). The developed HPLC method was transferred to LC–ESI–QTOF–MS/MS for identification of DPs. The final mass spectrometric conditions were optimized for better ionization of drug and DPs with optimum mass signal sensitivity. All the formed DPs were new and well separated with sufficient resolution. The developed HPLC method was validated as per ICH-guidelines and can be used in drug testing labs for determination of quality of MCT in bulk and finished formulations.     

Development and validation of a stability-indicating reversed-phase high performance liquid chromatography method for assay of betamethylepoxide and estimation of its related compounds

Betamethylepoxide (16beta-methyl-Delta(1,4)-pregnadiene-9beta-11beta-oxide-17alpha,21-diol-3,20-dione) is a key intermediate for the synthesis of various active pharmaceutical ingredients (APIs) of steroid compounds. A stability-indicating reversed-phase HPLC method for assay of betamethylepoxide and estimation of its related compounds has been developed and validated. This method can accurately quantitate betamethylepoxide in the presence of numerous structurally related compounds (including the alpha-epimer, known as alphamethylepoxide). This method can also adequately separate most of the impurities from each other and estimate their quantities in betamethylepoxide samples. The stability-indicating capability of this method has been demonstrated by adequate separation of the degradation products from betamethylepoxide in stress degraded and aged stability samples. The HPLC column used in the method was a 5 cm YMC Hydrosphere C(18) column (4.6 mm I.D.) and the mobile phase consisted of (A) water and (B) acetonitrile:methanol (8:25, v/v).     

Validated Stability-Indicating HPLC–DAD Determination of the Antihypertensive Binary Mixture of Carvedilol and Hydrochlorothiazide in Tablet Dosage Forms

A simple and selective HPLC with diode array detection stability-indicating method was developed for the simultaneous determination of the antihypertensive drugs carvedilol (CRV) and hydrochlorothiazide (HCT) in their combined formulations. Effective chromatographic separation was achieved using Zorbax SB-C8 column (4.6 × 250 mm, 5 μm) with gradient elution of the mobile phase composed of 0.025 M phosphoric acid and acetonitrile at a flow rate of 1 mL min^?1. The multiple wavelength detector was set at 242 nm for measurement of CRV and 271 nm for HCT. Quantification was based on measuring the peak areas. The cited drugs were resolved with retention times 4.9 and 6.7 min for HCT and CRV, respectively. Analytical performance of the proposed HPLC procedure was thoroughly validated with respect to system suitability, linearity, ranges, precision, accuracy, specificity, robustness, detection and quantification limits. The linearity ranges were 5–300 and 5–200 μg mL^?1 for CRV and HCT, respectively, with correlation coefficients >0.9996. Both drugs were subjected to stress conditions of acidic and alkaline hydrolysis, oxidation, photolysis and thermal degradation. The proposed method proved to be stability-indicating by resolution of the drugs from their forced degradation products. Moreover, specificity of the method was verified by resolution of both drugs from more than 20 pharmaceutical compounds of various medicinal categories. The validated HPLC method was applied to the analysis of the cited antihypertensive drugs in their combined tablet dosage forms. The proposed method made use of DAD as a tool for peak identity and purity confirmation.     

Validated Stability-Indicating HPLC–DAD Determination of the Antihypertensive Binary Mixture of Carvedilol and Hydrochlorothiazide in Tablet Dosage Forms

A simple and selective HPLC with diode array detection stability-indicating method was developed for the simultaneous determination of the antihypertensive drugs carvedilol (CRV) and hydrochlorothiazide (HCT) in their combined formulations. Effective chromatographic separation was achieved using Zorbax SB-C8 column (4.6 × 250 mm, 5 μm) with gradient elution of the mobile phase composed of 0.025 M phosphoric acid and acetonitrile at a flow rate of 1 mL min⁻¹. The multiple wavelength detector was set at 242 nm for measurement of CRV and 271 nm for HCT. Quantification was based on measuring the peak areas. The cited drugs were resolved with retention times 4.9 and 6.7 min for HCT and CRV, respectively. Analytical performance of the proposed HPLC procedure was thoroughly validated with respect to system suitability, linearity, ranges, precision, accuracy, specificity, robustness, detection and quantification limits. The linearity ranges were 5–300 and 5–200 μg mL⁻¹ for CRV and HCT, respectively, with correlation coefficients >0.9996. Both drugs were subjected to stress conditions of acidic and alkaline hydrolysis, oxidation, photolysis and thermal degradation. The proposed method proved to be stability-indicating by resolution of the drugs from their forced degradation products. Moreover, specificity of the method was verified by resolution of both drugs from more than 20 pharmaceutical compounds of various medicinal categories. The validated HPLC method was applied to the analysis of the cited antihypertensive drugs in their combined tablet dosage forms. The proposed method made use of DAD as a tool for peak identity and purity confirmation.

     

Development and validation of a reversed phase HPLC method for quantitative analysis of bis-isoxazolylnaphthoquinone

The goal of this study was to determine the kinetic parameters involved in the decomposition of 2-(5-methyl-4-isoxazolylamino)-N-(5-methyl-4-isoxazolyl)-1,4-naphthoquinone-4-imine (1) in aqueous solution and to identify the main degradation products. An isocratic HPLC assay was used to study the degradation rate of 1. The products of hydrolysis were identified by comparison of their retention times with those of authentic samples. The amount of 1 and the two degradation products resulting from storage of 1 in various buffer solutions was followed in function of time by a reversed-phase HPLC stability-indicating method. The observed degradation rates followed pseudo-first-order kinetics at constant pH, temperature and ionic strength. The log k–pH-profile was constructed at 35°C from the first-order rate constants obtained from studies at pH values ranging from 0.88 to 10.80 (μ=0.5 M). Hydrolysis in the acidic and alkaline media resulted in the formation of two degradation products in each case. The pH-rate profile of 1 in buffer solution was adequately described using a four-term rate equation. The obtained pH-rate profile indicated specific acid–base catalysis with a region of maximum stability between pH 6.40 and 7.40 which can be adequate for formulations of 1.     

Stability-indicating validated HPLC method for simultaneous determination of oral antidiabetic drugs from thiazolidinedione and sulfonylurea groups in combined dosage forms

For type 2 diabetes treatment, combinations of drugs from the thiazolidinedione and sulfonylurea groups are now available in the same tablet or capsule. Therefore, a stability-indicating and validated HPLC method was developed for simultaneous determination of pioglitazone, rosiglitazone, and glipizide in combined dosage forms. The examined drugs were subjected to different conditions such as acid and base, temperature, and UV light, and degradation of pioglitazone and glipizide was observed under thermal and acidic stress. However, selectivity of the presented method for pioglitazone, rosiglitazone, and glipizide assay against their degradation products was confirmed. It was also demonstrated to be robust, resisting small deliberate changes in pH of the buffer, flow rate, and percentage of acetonitrile in the mobile phase. The presented method utilizes a LiChrospher RP18 column (125 x 4.0 mm), acetonitrile in phosphate buffer at pH 4.3 (40 + 60, v/v) as the mobile phase, and UV detection at 225 nm for pioglitazonel glipizide or 245 nm for rosiglitazone/glipizide. The method was validated with respect to linearity, precision, and accuracy. Finally, the elaborated procedure was applied for the QC of pioglitazone/glipizide and rosiglitazone/glipizide mixtures.     

HPLC, TLC, and first-derivative spectrophotometry stability-indicating methods for the determination of tropisetron in the presence of its acid degradates

Three stability-indicating assay methods were developed for the determination of tropisetron in a pharmaceutical dosage form in the presence of its degradation products. The proposed techniques are HPLC, TLC, and first-derivative spectrophotometry (1D). Acid degradation was carried out, and the degradation products were separated by TLC and identified by IR, NMR, and MS techniques. The HPLC method was based on determination of tropisetron in the presence of its acid-induced degradation product on an RP Nucleosil C18 column using methanol-water-acetonitrile-trimethylamine (65 + 20 + 15 + 0.2, v/v/v/v) mobile phase and UV detection at 285 nm. The TLC method was based on the separation of tropisetron and its acid-induced degradation products, followed by densitometric measurement of the intact spot at 285 nm. The separation was carried out on silica gel 60 F254 aluminum sheets using methanol-glacial acetic acid (22 + 3, v/v) mobile phase. The 1D method was based on the measurement of first-derivative amplitudes of tropisetron in H2O at the zero-crossing point of its acid-induced degradation product at 271.9 nm. Linearity, accuracy, and precision were found to be acceptable over concentration ranges of 40-240 microg/mL, 1-10 microg/spot, and 6-36 micro/mL for the HPLC, TLC, and 1D methods, respectively. The suggested methods were successfully applied for the determination of the drug in bulk powder, laboratory-prepared mixtures, and a commercial sample.     

Boronate-Containing Copolymer Grafted on Eupergit C as Matrix for Affinity Chromatography: Isotherms and Kinetics Study

A stability-indicating HPLC method has been developed and subsequently validated for the simultaneous determination of domperidone and pantoprazole in commercial tablets. The proposed HPLC method utilizes Phenomenex^® Gemini C₁₈ column (150 mm × 4.6 mm i.d., 5 μm) and mobile phase consisting of methanol-acetonitrile-20 mM dipotassium hydrogen phosphate and phosphoric acid buffer pH 7.0 (20:33:47, v/v/v) at a flow rate of 1.19 mL min^?1. Quantitation was achieved with UV detection at 285 nm based on peak area with linear calibration curves at concentration ranges 0.5–5.0 μg mL^?1 for domperidone and 1.0–10 μg mL^?1 for pantoprazole (R ² > 0.999 for both drugs). The method was validated in terms of accuracy, precision, linearity, limits of detection, limits of quantitation and robustness. This method has been successively applied to pharmaceutical formulation and no interference from the tablet excipients was found. Domperidone, pantoprazole and their combination drug product were exposed to acid, base and neutral hydrolysis, oxidation, dry heat and photolytic stress conditions and the stressed samples were analyzed by the proposed method. As the proposed method could effectively separate the drug from its degradation products, it can be employed as stability-indicating method for the determination of instability of these drugs in bulk and commercial products.     

Kinetic study of the degradation of forskolin in aqueous systems by stability-indicating HPLC method and identification of its degradation products

The degradation kinetics of forskolin in aqueous solution was investigated qualitatively and quantitatively. Two degradation products were isolated and identified as isoforskolin and forskolin D by liquid chromatography–tandem mass spectrometry (LC–MS/MS) and nuclear magnetic resonance (NMR) spectroscopy. A stability-indicating high-performance liquid chromatography (HPLC) method was developed and validated for the quantification of forskolin and its degradation products. Chromatographic separation was performed on a Luna C₁₈ column with acetonitrile–water (65:35, v/v) as the mobile phase. The flow rate was kept at 1 mL/min, and the detection wavelength was 210 nm. The kinetic study of forskolin was carried out in aqueous solutions of pH 1.5–8.5 at 37, 50, 65, and 80°C. The degradation rate of forskolin increases with increasing temperature. Forskolin is relatively stable in the pH range 3.5–6.5, but its stability decreases when the pH is outside this range. In the pH range 6.5–8.5, the forskolin degradation follows pseudo-first-order kinetics. Based on the structural identification and quantitative analysis of the degradation products, a possible pathway for forskolin degradation is proposed. Forskolin can be converted to isoforskolin rapidly, and both forskolin and isoforskolin can further decompose to forskolin D.     

Stability-Indicating LC Method for the Determination of Olmesartan in Bulk Drug and in Pharmaceutical Dosage Form

A novel stability-indicating LC assay method was developed and validated for quantitative determination of olmesartan in bulk drugs and in pharmaceutical dosage form in the presence of degradation products generated from forced degradation studies. An isocratic, reversed phase LC method was developed to separate the drug from the degradation products, using an Ace5-C18 (250 mm × 4.6 mm, 5 μm) column, and 50 mM ammonium acetate (pH-5.5 by acetic acid) and acetonitrile (70:30 v/v) as a mobile phase. The detection was carried out at the wavelength of 235 nm. The olmesartan was subjected to stress conditions of hydrolysis (acid, base), oxidation, photolysis and thermal degradation. Degradation was observed for olmesartan in acid, base and in 30% H₂O₂ conditions. The drug was found to be stable in the other stress conditions attempted. The degradation products were well resolved from the main peak. The percentage recovery of olmesartan ranged from (99.89 to 100.95%) in pharmaceutical dosage form. The developed method was validated with respect to linearity, accuracy (recovery), precision, specificity and robustness. The forced degradation studies prove the stability-indicating power of the method.

     

Photodegradation Kinetics of Fexofenadine Hydrochloride Using a LC Method

The kinetics of photodegradation of the antihistamine fexofenadine hydrochloride using a stability-indicating high performance liquid chromatography (HPLC) method is demonstrated. The degradation was carried out in methanol and in water solutions, prepared from coated tablets, in quartz cells under UV light at 254 nm. The kinetics parameters of order of reaction and the rate constants of the degradation were determined for both solvents. The degradation process of fexofenadine hydrochloride in solutions can be described by second-order kinetics under the experimental conditions used in this study. The obtained results show that the HPLC method is satisfactory in the determination of the kinetics of degradation of fexofenadine hydrochloride in the presence of its photolytic degradation products.     

Validated HPTLC and HPLC methods for determination of fluorometholone and sodium cromoglycate in presence of their impurities and degradation products; application to kinetic study and on rabbit aqueous humor

Fluorometholone (FLM) and Sodium Cromoglycate (CMG) are co-formulated in ophthalmic preparation and showed marked instability under different conditions. Two specific, sensitive and precise stability-indicating chromatographic methods have been developed and validated for their determination in the presence of their degradation products and FLM impurity. Ten components were efficiently separated by them. The first method was HPTLC-spectrodensitometry, where the separation was achieved using silica gel 60?F₂₅₄ HPTLC plates and developing system of ethyl acetate: methanol (9:1, v/v). The second method was a reversed phase HPLC associated with kinetic study of the degradation process and was successfully applied for determination of the studied compounds in spiked rabbit aqueous humor. The mobile phase was acetonitrile: methanol: 0.05?M potassium dihydrogenphosphate (0.1% trimethylamine); pH 2.5, adjusted with orthophosphoric acid (20: 30: 50, by volume). In both methods, the separated components were detected at 240?nm and system suitability was checked. Good correlation was obtained in the range of 0.10–24.00 and 0.20–48.00?µg band^?1, for FLM and CMG by HPTLC. While for HPLC, the linearity ranges from 0.01–50.00 and 0.05–50.00?µg?mL^?1 for both drugs. The methods were applied in pharmaceutical formulation, where they were compared to the reported method with no significant difference.     

Simultaneous determination of tretinoin and clindamycin phosphate and their degradation products in topical formulations by reverse phase HPLC

A new HPLC method based on reverse phase separation and photodiode-array detection has been developed for the simultaneous determination of tretinoin and clindamycin phosphate, and their degradation products in topical formulations. The method has been shown to be stability indicating, accurate, and precise for two different formulation vehicles. Separation was achieved on a reverse phase C18 column (Lichrospher, RP18, 5 microm, 25 cm x 4.6 mm ID, Phenomenex, USA) using a simple gradient with aqueous-acetonitrile and aqueous-methanol mobile phases. The method recovery averaged 100.3% for tretinoin and 99.6% for clindamycin phosphate at a concentration range between 80% and 120% of the label claim. The method can be applied to assess the stability of tretinoin and clindamycin phosphate in pharmaceutical formulations containing tretinoin and clindamycin phosphate individually or in combination as active drugs.     

Stability indicating HPLC method for the simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations

ABSTRACT: BACKGROUND: A simple, specific, and fast stability indicating reverse phase liquid chromatographic method was established for instantaneous determination of moxifloxacin and prednisolone in bulk drugs and pharmaceutical formulations. RESULTS: Optimum chromatographic separations among the moxifloxacin, prednisolone and stressinduced degradation products were achieved within 10 minutes by use of BDS Hypersil C8 column (250 X 4.6 mm, 5 mum) as stationary phase with mobile phase consisted of a mixture of phosphate buffer (18 mM) containing 0.1% (v/v) triethylamine, at pH 2.8 (adjusted with dilute phosphoric acid) and methanol (38:62 v/v) at a flow rate of 1.5 mL min-1. Detection was performed at 254 nm using diode array detector. The method was validated in accordance with ICH guidelines. Response was a linear function of concentrations over the range of 20-80 mug mL-1 for moxifloxacin (r2 [greater than or equal to] 0.998) and 40-160 mug mL-1 for prednisolone (r2 [greater than or equal to] 0.998). The method was resulted in good separation of both the analytes and degradation products with acceptable tailing and resolution. The peak purity index for both the analytes after all types of stress conditions was [greater than or equal to] 0.9999 indicated a complete separation of both the analyte peaks from degradation products. The method can therefore, be regarded as stabilityindicating. CONCLUSIONS: The developed method can be applied successfully for simultaneous determination of moxifloxacin and prednisolone in pharmaceutical formulations and their stability studies.     

Development of a novel quality by design–enabled stability-indicating HPLC method and its validation for the quantification of nirmatrelvir in bulk and pharmaceutical dosage forms

A systematic and novel quality by design–enabled, rapid, simple, and economic stability–indicating HPLC method for quantifying nirmatrelvir (NMT) was successfully developed and validated. An analytical target profile (ATP) was established, and critical analytical attributes (CAAs) were allocated to meet the ATP requirements. The method used chromatographic separation using a Purosphere column with a 4.6 mm inner diameter × 250 mm (2.5 μm). The analysis occurred at 50°C with a flow rate of 1.2 mL/min and detection at 220 nm. A 10 μL sample was injected, and the mobile phase consisted of two components: mobile phase A, containing 0.1% formic acid in water (20%), and mobile phase B, containing 0.1% formic acid in acetonitrile (80%). The diluent was prepared by mixing acetonitrile and water at a 90:10 v/v ratio. The retention time for the analyte was determined to be 2.78 min. Accuracy exceeded 99%, and the correlation coefficient was greater than 0.999. The validated HPLC method was characterized as precise, accurate, and robust. Significantly, NMT was found to be susceptible to alkaline, acidic, and peroxide conditions during forced degradation testing. The stability-indicating method developed effectively separated the degradation products formed during stress testing, underlining its effectiveness in stability testing and offering accuracy, reliability, and sensitivity in determining NMT.     

Stability indicating methods for the determination of some anti-fungal agents using densitometric and RP-HPLC methods

Two chromatographic methods were developed for the determination of some anti-fungal drugs in the presence of either their degradation products or cortisone derivatives. The densitometric method determined mixtures of each of ketoconazole (KT), clotrimazole (CL), miconazole nitrate (MN) and econazole nitrate (EN) with the degradation products of each one. Mixtures of MN with hydrocortisone (HC) and of EN with triamcinolone acetonide (TA) were also successfully separated and determined by this technique. For KT and CL, a mixture of methanol:water:triethylamine (70:28:2 v/v) was used as a developing system and the spots were scanned at 243 nm and 220 nm for KT and CL, respectively. For MN and EN, a mixture of hexane:isopropyl alcohol:triethylamine (80:17:3 v/v) was used as a developing system and the spots were scanned at 225 nm for both drugs. The HPLC method determined mixtures of CL or EN with their degradation products which were separated and quantified on a Zorbax C8 column. Elution was carried out using methanol:phosphate buffer pH 2.5 (65:35 v/v) as a mobile phase at a flow rate of 1.5 ml/min and UV detection at 220 nm for CL. For EN, a mixture of methanol:water containing 0.06 ml triethylamine pH 10 (75:25 v/v) was used as a mobile phase at a flow rate of 1.5 ml/min and UV detection at 225 nm. The methods were also used to separate mixtures of CL with betamethasone dipropionate (BD) and EN with TA in a laboratory prepared mixture and in pharmaceutical preparations. The methods were sensitive, precise and applicable for determination of the drugs in pharmaceutical dosage forms.