Versatile Photophysical Properties of meso‐Aryl‐Substituted Subporphyrins: Dipolar and Octupolar Charge‐Transfer Interactions

Donor–acceptor systems based on subporphyrins with nitro and amino substituents at meta and para positions of the meso‐phenyl groups were synthesized and their photophysical properties have been systematically investigated. These molecules show two types of charge‐transfer interactions, that is, from center to periphery and periphery to center depending on the peripheral substitution, in which the subporphyrin moiety plays a dual role as both donor and acceptor. Based on the solvent‐polarity‐dependent photophysical properties, we have shown that the fluorescence emission of para isomers originates from the solvatochromic, dipolar, symmetry‐broken, and relaxed excited states, whereas the non‐solvatochromic fluorescence of meta isomers is of the octupolar type with false symmetry breaking. The restricted meso‐(4‐aminophenyl) rotation at low temperature prevents the intramolecular charge‐transfer (ICT)‐forming process. The two‐photon absorption (TPA) cross‐section values were determined by photoexcitation at 800 nm in nonpolar toluene and polar acetonitrile solvents to see the effect of ICT on the TPA processes. The large enhancement in the TPA cross‐section value of approximately 3200 GM (1 GM=10^?50 cm⁴ s photon^?1) with donor–acceptor substitution has been attributed to the octupolar effect and ICT interactions. A correlation was found between the electron‐donating/‐withdrawing abilities of the peripheral groups and the TPA cross‐section values, that is, p‐aminophenyl>m‐aminophenyl>nitrophenyl. The increased stability of octupolar ICT interactions in highly polar solvents enhances the TPA cross‐section value by a factor of approximately 2 and 4, respectively, for p‐amino‐ and m‐nitrophenyl‐substituted subporphyrins. On the other hand, the stabilization of the symmetry‐broken, dipolar ICT state gives rise to a negligible impact on the TPA processes.     

Conjugated Donor‐Acceptor‐Acceptor (D‐A‐A) Molecule for Organic Nonvolatile Resistor Memory

A new donor‐acceptor‐acceptor (D‐A‐A) type of conjugated molecule, N‐(4‐(N′,N′‐diphenyl)phenylamine)‐4‐(4′‐(2,2‐dicyanovinyl)phenyl) naphthalene‐1,8‐dicarboxylic monoimide ( TPA‐NI‐DCN ), consisting of triphenylamine (TPA) donors and naphthalimide (NI)/dicyanovinylene (DCN) acceptors was synthesized and characterized. In conjunction with previously reported D ‐A based materials, the additional DCN moiety attached as end group in the D‐A‐A configuration can result in a stable charge transfer (CT) and charge‐separated state to maintain the ON state current. The vacuum‐deposited TPA‐NI‐DCN device fabricated as an active memory layer was demonstrated to exhibit write‐once‐read‐many (WORM) switching characteristics of organic nonvolatile memory due to the strong polarity of the TPA‐NI‐DCN moiety.     

Ultrafast Photoinduced Energy and Electron Transfer in Multi‐Modular Donor–Acceptor Conjugates

New multi‐modular donor–acceptor conjugates featuring zinc porphyrin (ZnP), catechol‐chelated boron dipyrrin (BDP), triphenylamine (TPA) and fullerene (C₆₀), or naphthalenediimide (NDI) have been newly designed and synthesized as photosynthetic antenna and reaction‐center mimics. The X‐ray structure of triphenylamine‐BDP is also reported. The wide‐band capturing polyad revealed ultrafast energy‐transfer (k_ENT=1.0×10¹² s^?1) from the singlet excited BDP to the covalently linked ZnP owing to close proximity and favorable orientation of the entities. Introducing either fullerene or naphthalenediimide electron acceptors to the TPA‐BDP‐ZnP triad through metal–ligand axial coordination resulted in electron donor–acceptor polyads whose structures were revealed by spectroscopic, electrochemical and computational studies. Excitation of the electron donor, zinc porphyrin resulted in rapid electron‐transfer to coordinated fullerene or naphthalenediimide yielding charge separated ion‐pair species. The measured electron transfer rate constants from femtosecond transient spectral technique in non‐polar toluene were in the range of 5.0×10⁹–3.5×10¹⁰ s^?1. Stabilization of the charge‐separated state in these multi‐modular donor–acceptor polyads is also observed to certain level.     

A carbon–carbon hybrid – immobilizing carbon nanodots onto carbon nanotubes

The thrust of this work is to integrate small and uniformly sized carbon nanodots (CNDs) with single-walled carbon nanotubes (SWCNT) of different diameters as electron donors and electron acceptors, respectively, and to test their synergetic interactions in terms of optoelectronic devices. CNDs (denoted pCNDs, where p indicates pressure) were prepared by pressure-controlled microwave decomposition of citric acid and urea. pCNDs were immobilized on single-walled carbon nanotubes by wrapping the latter with poly(4-vinylbenzyl trimethylamine) (PVBTA), which features positively charged ammonium groups in the backbone. Negatively charged surface groups on the CNDs lead to attractive electrostatic interactions. Ground state interactions between the CNDs and SWCNTs were confirmed by a full-fledged photophysical investigation based on steady-state and time-resolved techniques. As a complement, charge injection into the SWCNTs upon photoexcitation was investigated by ultra-short time-resolved spectroscopy.     

Facile Generation of Thermally Activated Delayed Fluorescence and Fabrication of Highly Efficient Non-Doped OLEDs Based on Triazine Derivatives

A series of donor–acceptor–donor triazine-based molecules with thermally activated delayed fluorescence (TADF) properties were synthesized to obtain highly efficient blue-emitting OLEDs with non-doped emitting layers (EMLs). The targeted molecules use a triazine core as the electron acceptor, and a benzene ring as the conjugated linker with different electron donors to alternate the energy level of the HOMO to further tune the emission color. The introduction of long alkyl chains on the triazine core inhibits the unwanted intermolecular D –D/A–A-type π–π interactions, resulting in the intermolecular D–A charge transfer. The weak aggregation-caused quenching (ACQ) effect caused by the suppressed intermolecular D –D/A–A-type π–π interaction further enhances the emission. The crowded molecular structure allows the electron donor and acceptor to be nearly orthogonal, thereby reducing the energy gap between triplet and singlet excited states (ΔE_ST). As a result, blue-emitting devices with TH-2DMAC and TH-2DPAC non-doped EMLs showed satisfactory efficiencies of 12.8 % and 15.8 %, respectively, which is one of the highest external quantum efficiency (EQEs) reported for blue TADF emitters (λ_peak<475 nm), demonstrating that our tailored molecular designs are promising strategies to endow OLEDs with excellent electroluminescent performances.     

A Visible‐Light‐Promoted O‐Glycosylation with a Thioglycoside Donor

Visible‐light irradiation of 4‐p‐methoxyphenyl‐3‐butenylthioglucoside donors in the presence of Umemoto's reagent and alcohol acceptors serves as a mild approach to O‐glycosylation. Visible‐light photocatalysts are not required for activation, and alkyl‐ and arylthioglycosides not bearing the p‐methoxystyrene are inert to these conditions. Experimental and computational evidence for an intervening electron donor–acceptor complex, which is necessary for reactivity, is provided. Yields with primary, secondary, and tertiary alcohol acceptors range from moderate to high. Complete β‐selectivity can be attained through neighboring‐group participation.     

Ultrafast Photoinduced Charge Separation Leading to High‐Energy Radical Ion‐Pairs in Directly Linked Corrole–C60 and Triphenylamine–Corrole‐C60 Donor–Acceptor Conjugates

Closely positioned donor–acceptor pairs facilitate electron‐ and energy‐transfer events, relevant to light energy conversion. Here, a triad system TPACor‐C₆₀ , possessing a free‐base corrole as central unit that linked the energy donor triphenylamine ( TPA ) at the meso position and an electron acceptor fullerene (C₆₀) at the β‐pyrrole position was newly synthesized, as were the component dyads TPA‐Cor and Cor‐C₆₀ . Spectroscopic, electrochemical, and DFT studies confirmed the molecular integrity and existence of a moderate level of intramolecular interactions between the components. Steady‐state fluorescence studies showed efficient energy transfer from ¹ TPA* to the corrole and subsequent electron transfer from ¹corrole* to fullerene. Further studies involving femtosecond and nanosecond laser flash photolysis confirmed electron transfer to be the quenching mechanism of corrole emission, in which the electron‐transfer products, the corrole radical cation ( Cor^?+ in Cor‐C₆₀ and TPA‐Cor^?+ in TPACor‐C₆₀ ) and fullerene radical anion (C₆₀^??), could be spectrally characterized. Owing to the close proximity of the donor and acceptor entities in the dyad and triad, the rate of charge separation, k_CS, was found to be about 10¹¹ s^?1, suggesting the occurrence of an ultrafast charge‐separation process. Interestingly, although an order of magnitude slower than k_CS, the rate of charge recombination, k_CR, was also found to be rapid (k_CR≈10¹⁰ s^?1), and both processes followed the solvent polarity trend DMF>benzonitrile>THF>toluene. The charge‐separated species relaxed directly to the ground state in polar solvents while in toluene, formation of ³corrole* was observed, thus implying that the energy of the charge‐separated state in a nonpolar solvent is higher than the energy of ³corrole* being about 1.52 eV. That is, ultrafast formation of a high‐energy charge‐separated state in toluene has been achieved in these closely spaced corrole–fullerene donor–acceptor conjugates.     

Through-Space Charge-Transfer Polynorbornenes with Fixed and Controllable Spatial Alignment of Donor and Acceptor for High-Efficiency Blue Thermally Activated Delayed Fluorescence

Through-space charge transfer polynorbornenes with fixed and controllable spatial alignment of donor and acceptor in edge-to-face/face-to-face stacking patterns are developed for achieving high-efficiency blue thermally activated delayed fluorescence (TADF). The alignment is realized by using the cis, exo-configuration of norbornene to confine donor and acceptor in close proximity, and utilizing orthogonal and dendritic structures of donors to provide either perpendicular or parallel stacking motif relative to acceptors. Compared to edge-to-face counterparts, polynorbornenes with face-to-face aligned donor and acceptor exhibit much larger oscillator strength and higher photoluminescence quantum yield. The resulting polymers exhibit deep blue (422 nm) to sky blue (482 nm) emission and TADF effect with reverse intersystem crossing rates of 0.4–5.9×10⁶ s⁻¹, giving the maximum external quantum efficiency of 18.8 % for non-doped blue organic light-emitting diodes by solution process.     

Self-Promoted N-Glycosylation: Extended Substrate Scope and Substituent Effects

A self-promoted glycosylation method for the stereoselective formation of β-glucosides from a substrate library of glycosyl trichloroacetimidate glycosyl donors and glycosyl acceptors is presented. The simple two-component reaction takes place at elevated temperatures, without the addition of any additives or catalysts. After a simple basic workup, N-glycosides were obtained in good yields and with high β-selectivity and hence this method allows for easy access to glycoconjugates under very mild conditions. The influences of neighboring group participation and substituents, in both the glycosyl donor and acceptor, were studied. Kinetic data were obtained from in situ IR and these were used for a Hammett study. A connection between the pK_a of the acceptor and reaction rate was found and new mechanistic insight in self-promoted glycosylations gained.     

Regio/Stereoselective Glycosylation of Diol and Polyol Acceptors in Efficient Synthesis of Neu5Ac‐α‐2,3‐LacNPhth Trisaccharide

A concise approach to a Neu5Ac‐α‐2,3‐LacNPhth trisaccharide derivative was developed. First, the regio/stereoselective glycosylation between glycoside donors and glucoNPhth diol acceptors was investigated. It was found that the regioselectivity depends not only on the steric hindrance of the C2‐NPhth group and the C6‐OH protecting group of the glucosamine acceptors, but also on the leaving group and protecting group of the glycoside donors. Under optimized conditions, LacNPhth derivatives were synthesized in up to 92 % yield through a regio/stereoselective glycosylation between peracetylated‐α‐galactopyranosyl trichloroacetimidate and p‐methoxyphenyl 6‐O‐tert‐butyldiphenylsilyl‐2‐deoxy‐2‐phthalimido‐β‐d ‐glucopyranoside, avoiding the formation of glycosylated orthoesters and anomeric aglycon transfer. Then, the LacNPhth derivative was deacylated and then protected on the primary position by TBDPS to form a LacNPhth polyol acceptor. Finally, the Neu5Ac‐α‐2,3‐LacNPhth derivative was synthesized in 48 % yield through the regio/stereoselective glycosylation between the LacNPhth polyol acceptor and a sialyl phosphite donor. Starting from d ‐glucosamine hydrochloride, the target Neu5Ac‐α‐2,3‐LacNPhth derivative was synthesized in a total yield of 18.5 % over only 10 steps.     

PAH/PAH(CF3)n Donor/Acceptor Charge-Transfer Complexes in Solution and in Solid-State Co-Crystals

A solution, solid-state, and computational study is reported of polycyclic aromatic hydrocarbon PAH/PAH(CF₃)_n donor/acceptor (D/A) charge-transfer complexes that involve six PAH(CF₃)_n acceptors with known gas-phase electron affinities that range from 2.11(2) to 2.805(15) eV and four PAH donors, including seven CT co-crystal X-ray structures that exhibit hexagonal arrays of mixed π-stacks with 1/1, 1/2, or 2/1 D/A stoichiometries (PAH=anthracene, azulene, coronene, perylene, pyrene, triphenylene; n=5, 6). These are the first D/A CT complexes with PAH(CF₃)_n acceptors to be studied in detail. The nine D/A combinations were chosen to allow several structural and electronic comparisons to be made, providing new insights about controlling D/A interactions and the structures of CT co-crystals. The comparisons include, among others, CT complexes of the same PAH(CF₃)_n acceptor with four PAH donors and CT complexes of the same donor with four PAH(CF₃)_n acceptors. All nine CT complexes exhibit charge-transfer bands in solution with λ_max between 467 and 600 nm. A plot of E(λ_max) versus [IE(donor)−EA(acceptor)] for the nine CT complexes studied is linear with a slope of 0.72±0.03 eV eV⁻¹. This plot is the first of its kind for CT complexes with structurally related donors and acceptors for which precise experimental gas-phase IEs and EAs are known. It demonstrates that conclusions based on the common assumption that the slope of a CT E(λ_max) versus [IE−EA] plot is unity may be incorrect in at least some cases and should be reconsidered.     

Spectroscopic studies of charge transfer complexes of meso‐tetra‐p‐tolylporphyrin and its zinc complex with some aromatic nitro acceptors in different organic solvents

The charge transfer complex (CTC) formation of 5,10,15,20‐tetra(p‐tolyl)porphyrin (TTP) and zinc 5,10,15,20‐tetra(p‐tolyl)porphyrin with some aromatic nitro acceptors such as 2,4,6‐trinitrophenol (picric acid), 3,5‐dinitrosalicylic acid, 3,5‐dinitrobenzoic acid (DNB) and 2,4‐dinitrophenol (DNP) was studied spectrophotometrically in different organic solvents at different temperatures. The spectrophotometric titration, Job's and straight line methods indicated the formation of 1:1 CTCs. The values of the equilibrium constant (K_CT) and molar extinction coefficient (ε_CT) were calculated for each complex. The ionization potential of the donors and the dissociation energy of the charge transfer excited state for the CTC in different solvents was also determined and was found to be constant. The spectroscopic and thermodynamic properties were observed to be sensitive to the electron affinity of the acceptors and the nature of the solvent. No CT band was observed between Zn‐TTP as donor and DNP or DNB as acceptors in various organic solvents at different temperature. Bimolecular reactions between singlet excited TTP (¹TTP*) and the acceptors were investigated in solvents with various polarities. A new emission band was observed. The fluorescence intensity of the donor band decreased with increasing the concentration of the acceptor accompanied by an increase in the intensity of the new emission. The new emission of the CTCs can be interpreted as a CT excited complex (exciplex). Copyright © 2007 John Wiley & Sons, Ltd.     

Mapping the Relationship between Glycosyl Acceptor Reactivity and Glycosylation Stereoselectivity

The reactivity of both coupling partners—the glycosyl donor and acceptor—is decisive for the outcome of a glycosylation reaction, in terms of both yield and stereoselectivity. Where the reactivity of glycosyl donors is well understood and can be controlled through manipulation of the functional/protecting‐group pattern, the reactivity of glycosyl acceptor alcohols is poorly understood. We here present an operationally simple system to gauge glycosyl acceptor reactivity, which employs two conformationally locked donors with stereoselectivity that critically depends on the reactivity of the nucleophile. A wide array of acceptors was screened and their structure–reactivity/stereoselectivity relationships established. By systematically varying the protecting groups, the reactivity of glycosyl acceptors can be adjusted to attain stereoselective cis‐glucosylations.     

A new ‘hydrogen‐bond rule' applied to the structure of l‐seryl‐l‐alanine and pairs of dipeptide retroanalogues

A new `rule' for the association of hydrogen‐bond donors and acceptors in crystal structures is presented. It implies that ranks are assigned to each donor and each acceptor (1 is best, 2 is next best etc.), and that hydrogen bonds should be formed between donors and acceptors in rank order. l ‐Ser‐l ‐Ala, C₆H₁₂N₂O₄, is used together with its retroanalogue, l ‐Ala‐l ‐Ser, and three other pairs of dipeptide retroanalogues to illustrate this rule and the reasons why it may not always be followed.     

Enthalpimetric measurements in solid—solid reactions. The formation of intermolecular charge-transfer complexes

The possibility of obtaining thermodynamic parameters from solid—solid interaction reactions in the formation of charge-transfer (CT) complexes has been studied carrying out the syntheses directly in a DSC apparatus. The interactions between the donor p-bromophenol and the acceptors p-benzoquinone, chloranyl and bromanyl have been considered. It was observed that the solid—solid interaction occurs only for the system p-bromophenol:p-benzoquinone; for the system p-bromophenol:bromanyl the reaction occurs in the molten donor; the acceptor chloranyl does not react.     

Transfer of electron density as a result of hydrogen bond formation— A case of charged complexes

Previous investigation of transfer of electron density accompanying hydrogen bond formation has been extended to complexes between positively charged donors and neutral acceptors, as well as to the complexes between a neutral donor and a negatively charged acceptor molecules. The amount of transferred electron density from acceptor to donor for the charged complexes may be adequately described by the same exponential dependence on the equilibrium distance between the hydrogen atom and the nearest atom of the acceptor molecule as it was found for neutral complexes. Relation of the H‐bond energy to electron density at the H‐bond critical point was dependent on the sign of Laplacian of the electron density. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Weak Intermolecular Hydrogen Bonds with Fluorine: Detection and Implications for Enzymatic/Chemical Reactions,Chemical Properties,and Ligand/Protein Fluorine NMR Screening

It is known that strong hydrogen‐bonding interactions play an important role in many chemical and biological systems. However, weak or very weak hydrogen bonds, which are often difficult to detect and characterize, may also be relevant in many recognition and reaction processes. Fluorine serving as a hydrogen‐bond acceptor has been the subject of many controversial discussions and there are different opinions about it. It now appears that there is compelling experimental evidence for the involvement of fluorine in weak intramolecular or intermolecular hydrogen bonds. Using established NMR methods, we have previously characterized and measured the strengths of intermolecular hydrogen‐bond complexes involving the fluorine moieties CH₂F, CHF₂, and CF₃, and have compared them with the well‐known hydrogen‐bond complex formed between acetophenone and the strong hydrogen‐bond donor p‐fluorophenol. We now report evidence for the formation of hydrogen bonds involving fluorine with significantly weaker donors, namely 5‐fluoroindole and water. A simple NMR method is proposed for the simultaneous measurement of the strengths of hydrogen bonds between an acceptor and a donor or water. Important implications of these results for enzymatic/chemical reactions involving fluorine, for chemical and physical properties, and for ligand/protein ¹⁹F NMR screening are analyzed through experiments and theoretical simulations.     

Hydrogen bond donors and acceptors are generally depolarized in α-helices as revealed by a molecular tailoring approach

Hydrogen-bond (H-bond) interaction energies in α-helices of short alanine peptides were systematically examined by precise density functional theory calculations, followed by a molecular tailoring approach. The contribution of each H-bond interaction in α-helices was estimated in detail from the entire conformation energies, and the results were compared with those in the minimal H-bond models, in which only H-bond donors and acceptors exist with the capping methyl groups. The former interaction energies were always significantly weaker than the latter energies, when the same geometries of the H-bond donors and acceptors were applied. The chemical origin of this phenomenon was investigated by analyzing the differences among the electronic structures of the local peptide backbones of the α-helices and those of the minimal H-bond models. Consequently, we found that the reduced H-bond energy originated from the depolarizations of both the H-bond donor and acceptor groups, due to the repulsive interactions with the neighboring polar peptide groups in the α-helix backbone. The classical force fields provide similar H-bond energies to those in the minimal H-bond models, which ignore the current depolarization effect, and thus they overestimate the actual H-bond energies in α-helices. © 2019 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.     

Photoinduced Electron Transfer in Host-Guest Complexes of 2-Naphthyl-O(CH2) n -adamantanamines with Mono-6-O-p-nitrobenzoyl-β-cyclodextrin and Mono-6-O-m-nitrobenzoyl-β-cyclodextrin

A number of naphthalene derivatives containing adamantanamine binding moiety and an (CH₂) _n (n=2, 3, 4, 5, 6) spacer were prepared as the electron donor. A supramolecular assembly was fabricated by the inclusion between the donor substrates and the host molecules, i.e., mono-6-O-p-nitrobenzoyl-β-cyclodextrin (pNBCD) and mono-6-O-m-nitrobenzoyl-β-cyclodextrin (mNBCD), in water. The fluorescence quenching in these systems was studied in detail. It revealed efficient photoinduced electron transfers (PET) between the naphthalene donors and the cyclodextrin acceptors. This PET process was partitioned into a dynamic quenching component caused by bimolecule collision reactions and a static quenching component due to hydrophobic binding between the donor and acceptor molecules. Detailed Stern–Volmer constants were measured and they were partitioned into dynamic Stern–Volmer quenching constants (dynamic quenching) and static binding constants (static quenching). In these two pathways, the static quenching was found to be highly efficient and dominant in the presence of NBCD.     

Design of bicontinuous donor/acceptor morphologies for use as organic solar cell active layers

In recent works, we demonstrated the achievement of bicontinuous donor/acceptor morphologies by the addition of conjugated block copolymers to a blend of conjugated homopolymer donors and fullerene acceptors. However, the domain sizes resulting in experiments were much larger than those of interest for high‐performance organic solar cells. Moreover, a significant concentration of fullerene acceptors was present in the donor domains. Here, we utilize simulations to study the bicontinuous donor/acceptor morphologies that result for different parametric conditions. Using such results, we provide guidelines for how to blend polymer materials to give rise to bicontinuous phases with the smaller and more compositionally pure domains that are desirable for organic photovoltaic applications. Our results can be generalized to treat a large range of donor and acceptor monomers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 884–895