1-乙基-3-甲基咪唑丙氨酸离子液体热力学性质的研究

用中和法合成了氨基酸离子液体1-乙基-3-甲基咪唑丙氨酸([C₂mim][Ala]),并利用恒温环境的溶解反应热量计,在(288.15±0.01) K-(308.15±0.01) K温度范围内每隔5 K,测定不同质量摩尔浓度离子液体在水中的溶解焓(Δ_solH_m^θ).根据Archer的方法,通过线性拟合得到了该离子液体的标准摩尔溶解焓(Δ_sol),并计算了其相对表观摩尔溶解焓(^ΦL).在298.15 K下,根据Glasser经验方法得到了格子能U_POT = 566 kJ·mol^-1,并计算了其阴阳离子水化焓值(ΔH⁺ + ΔH^-) = -620 kJ·mol^-1及阴离子水化焓ΔH^-([Ala]^-) = -387 kJ·mol^-1.此外,估算了[C₂mim][Ala]水溶液的热容(C_p(sol))和表观摩尔热容(^ΦC_p).     

Pitzer方程应用于离子液体[Cnmim][H2PO4](n= 3, 4, 5, 6)溶解焓研究

在298.15 K下,利用等温环境溶解反应热量计,测定了离子液体[C_nmim][H₂PO₄] (n= 3, 4, 5, 6) (1-烷基-3-甲基咪唑磷酸盐)在水中不同浓度的摩尔溶解热(Δ_solH_m),根据Pitzer电解质溶液理论计算得到了标准摩尔溶解焓(Δ_solH_m⁰)和Pitzer焓参数：β_MX^(0)L, β_MX^(1)L,和C^ϕL,并计算了表观相对摩尔焓。通过推导讨论,得到了离子液体[C_nmim][H₂PO₄](n= 3, 4, 5, 6)同系物每摩尔亚甲基对标准摩尔溶解焓的贡献。     

RE(C5H8NS2)3(C12H8N2)(RE=La,Pr,Nd,Sm)的标准摩尔生成焓测定研究

在无水乙醇中,使低水合氯化稀土(RE=La, Pr, Nd, Sm)与吡咯烷二硫代氨基甲酸铵(APDC)和1,10-邻二氮菲(σ-phen·H₂O)反应,制得其三元固态配合物.用化学分析和元素分析确定它们的组成为RE (C₅H₈NS₂)₃(C₁₂H₈N₂) (RE= La, Pr, Nd, Sm).IR光谱说明RE³⁺分别与3个PDC-的6个硫原子双齿配位,同时与σ-phen的2个氮原子双齿配位,配位数为8.用精密转动弹热量计测定了它们的恒容燃烧热Δ_cU,分别为-17776.94±7.72, -17810.41±7.93, -17762.71±7.91和-17482.42±9.35 kJ·mol^-1;并计算了它们的标准摩尔燃烧焓和标准摩尔生成焓,分别为-17792.43±7.72, -17825.90±7.93, -17778.20±7.91, -17497.91±9.35 kJ*mol^-1和-83.05±8.60, -64.70±9.40, -104.77±8.78, -388.70±10.13 kJ·mol^-1.估算出未研究的同类配合物Ce(C₅H₈NS₂)₃(C₁₂H₈N₂)和Pm(C₅H₈NS₂)₃(C₁₂H₈N₂)的和分别为-17815, -17660 kJ·mol^-1和-60, -217 kJ·mol^-1.     

丙氨酸离子液体[C4mim][Ala]的热化学性质

在298.15 K下利用恒温环境溶解热量计测定了一系列含有已知微量水的1-丁基-3-甲基咪唑丙氨酸盐([C₄mim][Ala])离子液体(IL)不同浓度样品的摩尔溶解焓. 借助Debye-Hückel极限项, 用外推法确定了不同含水量的[C₄mim][Ala]样品的标准摩尔溶解焓[Δ_sH_m⁰(wc)]. 随着样品中水含量的增加, Δ_sH_m⁰(wc)的绝对值下降, 将Δ_sH_m⁰(wc)对含水量作图得到很好的直线, 其截距Δ_sH_m⁰(pure IL)=-60.74 kJ/mol, 可看作是不含水的[C₄mim][Ala]标准摩尔溶解焓的估算值. 利用精密氧弹热量计测定了[C₄mim][Ala]的燃烧热, 计算得到其标准摩尔生成焓Δ_fH_m⁰=(-675±11) kJ/mol.     

γ辐射下CMPO/[C2mim][NTf2]的辐解及其对Eu3+萃取的影响

主要考察了辛基(苯基)-N, N-二异丁基胺甲酰基甲基氧化膦(CMPO)在1-乙基-3-甲基咪唑双三氟甲基磺酰胺酸盐([C₂mim][NTf₂])中的γ辐解行为,同时考察辐射对CMPO/[C₂mim][NTf₂]萃取能力的影响。通过超高效液相色谱-四极杆飞行时间质谱联用仪(UPLC/Q-TOF-MS)进行定量分析、辐解产物认定以及产物半定量分析。CMPO/正十二烷作为对比条件进行了相同研究。结果表明：CMPO在[C₂mim][NTf₂]中的辐解率低于其在正十二烷中,并且辐解路径不同。在正十二烷体系中,CMPO主要发生C―P、C―N键的断链,而在离子液体体系中CMPO主要发生异丁基脱除反应,并与[C₂mim]^+·、·CF₃等离子液体产生的自由基发生取代反应。综合辐解研究结果,我们提出CMPO/[C₂mim][NTf₂]的辐解路径,这加深了CMPO在离子液体中辐解机理的认识。最后,通过萃取实验发现,当硝酸浓度为0.01 mol·L^-1,辐照剂量为800 kGy时,CMPO/[C₂mim][NTf₂]对Eu³⁺的萃取率依旧达到99%以上。     

室温离子液体对氨基苯磺酸的萃取性能

系统研究了[C₄mim][PF₆], [C₆mim][PF₆], [C₆mim][BF₄]和[C₈mim][BF₄]室温离子液体对间氨基苯磺酸、对氨基苯磺酸稀水溶液的萃取平衡. 实验结果表明: 萃取温度和相体积比的变化对分配比影响不大; 水相pH值对萃取平衡有较大的影响, 氨基苯磺酸在离子液体/水体系中的分配比在pH＝4.2时达到最大值; 水相中CaCl₂或Na₂SO₄的存在能较大幅度地提高氨基苯磺酸的分配比; 离子液体的阴离子的性质对分配比有显著的影响, 阴离子为[BF₄]^－的离子液体对氨基苯磺酸的萃取能力大于阴离子为[PF₆]^－的离子液体; 咪唑环上烷基链的长度也对萃取效果有一定的影响. 在所研究的离子液体中, [C₆mim][BF₄]和[C₈mim][BF₄]对氨基苯磺酸有较好的萃取性能, 且萃取相中的氨基苯磺酸可回收利用, 离子液体也可循环使用.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

1-甲基-3-乙基咪唑缬氨酸盐离子液体[C2mim][Val]的热化学

用中和法合成了氨基酸离子液体1-甲基-3-乙基咪唑缬氨酸盐([CB_2Bmim][Val]). 在298.15±0.01 K下, 利用恒温溶解反应热量计测定了不同含水量的[CB_2Bmim][Val]溶解成不同质量摩尔浓度溶液的溶解焓, ΔB_solBHB_mB (w), 借助标准加入法(SAM)和Archer方法得到了无水离子液体[CB_2Bmim][Val]的标准摩尔溶解焓, . 利用RB-II型精密转动弹热量计测定了该离子液体的燃烧热, 计算了其标准摩尔燃烧焓 和标准摩尔生成焓 |并结合该离子液体的标准摩尔溶解焓和乙基咪唑阳离子[CB_2Bmim]^＋在水溶液中的标准摩尔生成焓, 计算了[Val]P^－离子在水溶液中的标准摩尔生成焓. 利用RD496-III型热导式微量热量计测定了不同质量摩尔浓度[CB_2Bmim][Val]水溶液的稀释焓, 根据扩展的Debye-Hückel方程计算得到的相对表观摩尔焓P^φPL和根据Pitzer离子相互作用模型的计算值在实验误差范围内很好一致.     

1-烷基-3-甲基咪唑系列室温离子液体表面张力的研究

合成了系列1-烷基-3-甲基咪唑四氟硼酸盐([C_2～7mim]BF₄)及六氟磷酸盐([C_4～7mim]PF₆)室温离子液体, 并通过核磁氢谱、红外光谱、质谱等手段对其进行了结构表征; 采用Wilhelmy白金板法, 在293～338 K范围内测定了离子液体的表面张力, 测试结果显示, 同类离子液体表面张力γ随温度的升高而线性下降, 同种离子液体的表面张力呈现出较宽的变化范围, 如293 K下, 表面张力值从[C₂mim]BF₄的50.4 mJ/m²到[C₇mim]BF₄的36.1 mJ/m². 最后对离子液体的表面性能进行了讨论.     

磷改性失活TS-1高效催化C5=裂解制备C2=/C3=反应的研究

发展C₅⁼催化裂解高效制乙烯和丙烯(C₂⁼/C₃⁼)技术具有重要的研究意义及工业应用价值,其核心在于高效催化剂的开发.本文发展了以失活钛硅分子筛TS-1(De-TS-1)为催化剂的C₅⁼催化裂解过程,研究发现,P改性后的De-TS-1显示出优异的催化反应性能,C₂⁼+C₃⁼选择性与单程寿命分别达77.1%和213 h,其综合催化性能优于经典的ZSM-5催化剂.进一步研究表明,De-TS-1的Br?nsted性质符合C₅⁼裂解高效裂解的基本要求,P改性可进一步降低De-TS-1中Br?nsted酸的酸密度和酸强度,从而促进了目标产物C₂⁼/C₃⁼生成的主反应,抑制了C₅     

1-烷基-3-甲基咪唑氯化物焓变的热重分析

The structures of ionic liquids (ILs) based on 1-alkyl-3-methylimidazolium chloride [C_nmim]Cl (n = 2, 4, 6), (1-ethyl-3-methylimidazolium chloride [C₂mim]Cl, 1-butyl-3-methylimidazolium chloride [C₄mim]Cl, and 1-hexyl-3-methylimidazolium chloride [C₆mim]Cl) were elucidated by ¹H NMR and ¹³C NMR experiments. The vaporization characteristics of these ILs were studied by thermogravimetric analysis. Dynamic and isothermal thermogravimetric experiments were conducted in this study. The purpose of the dynamic experiments was to determine the initial decomposition temperature of the experimental sample and the temperature range for the isothermal thermogravimetric experiments. The purpose of the isothermal experiments was to record the mass dependence of the sample on time in the experimental temperature range. The Langmuir equation and Clausius-Clapeyron equation were used to fit the experimental data and obtain the vaporization enthalpies of these ILs at the average temperature within the experimental temperature range. However, in order to expand the applicability of the estimated values and to compare them with the literature data, the vaporization enthalpy ΔH_vap(T_av) measured at the average temperature was converted into vaporization enthalpy ΔH_vap(298) at ambient temperature. The difference between the heat capacities of the ILs in the gaseous and liquid states at constant pressure, Δ_l^gC_pm^ө proposed by Verevkin, was used in this conversion process. The experimental data for substance density and surface tension at other temperatures were obtained by referring to the literature. In addition, the data for density and surface tension at T = 298.15 K were obtained by applying the extrapolation method to the literature values for other temperatures. The vaporization enthalpy of the 1-octyl-3-methylimidazolium chloride IL [C₈mim]Cl was estimated by using the new vaporization model we had proposed in our previous work and compared with the reference value. The estimated value for [C₈mim]Cl was on the same order of magnitude as the reference value. We compared the vaporization enthalpies in the present study with those for the carboxylic acid imidazolium and amino acid imidazolium ILs ([C_nmim]Pro (n = 2-6) and [C_nmim]Thr (n = 2-6), respectively in our previous work. The results revealed that a change in the anion type affects the vaporization enthalpy of the ILs in the order amino acid imidazolium > carboxylic acid imidazolium > halogen imidazolium, when the cation is the same. Considering the structural differences between the three kinds of ILs, the abovementioned order may be related to the intermolecular hydrogen bonds. There were no intermolecular hydrogen bonds in the [C_nmim]Cl (n = 2, 4, 6) ILs studied here. Therefore, the vaporization enthalpy of [C_nmim]Cl (n = 2, 4, 6) was the lowest among the three kinds of ILs considered.     

[C_2mim][Ala]丙氨酸离子液体水溶液粘滞流动的活化参数

在288.15-328.15 K温度范围内,测量了不同浓度的氨基酸离子液体[C_2mim][Ala]水溶液的密度和粘度,根据J ones-Dole方程得到了较大正值的粘度B系数并且dB/dT0。借助Feakins理论,计算了溶质对溶液粘滞流动活化自由能贡献Δμ_2~(≠0),根据Δμ_2~(≠0)随温度的线性变化,进而得到流动活化熵ΔS_2~(≠0)和活化焓ΔH_2~(≠0);在E yring液体粘度的过渡态理论基础上,提出了预测离子液体[C_2mim][Ala]水溶液粘度的半经验新方法,其预测值与相应的实验值很好的一致。     

利用原位变温EPR研究富勒烯双体笼间的弱C―C键

本文研究了(C₆₀)₂-[P(O)(OCH₃)]₂富勒烯双体内的笼间C―C键的热力学性质(该双体的结构详见文献, Chem. Commun. 2011, 47, 6111)。原位、变温电子顺磁共振波谱实验结果表明,该C―C键的键离解能(BDE)为72.4 kJ·mol^-1 (17.3 kcal·mol^-1),仅约为常见氢键的两倍,或约为常见有机C―C键的五分之一。因此,该二聚体于较高温度时容易发生均裂反应,形成单体自由基;降温时又容易发生自由基聚合反应。基于该笼间C―C键所具有的这些热力学特性,我们对其可被用于制备有序的富勒烯分子元器件等材料作展开讨论。     

4-羟甲基吡啶的热力学性质

用精密自动绝热量热计测定了4-羟甲基吡啶在79～380 K温区的摩尔热容. 实验结果表明, 该化合物在79～301 K温区无相变和热异常现象发生, 在301～331 K, 发生固-液相变, 其熔化温度、摩尔熔化焓及摩尔熔化熵分别确定为：325.12 K, 11.78 kJ•mol^-1 和36.23 J•K^-1•mol^-1. 根据热力学函数关系式, 从热容值计算了4-羟甲基吡啶在80～380 K温区以标准状态（298.15 K）为基准的热力学函数值. 用热重法(TG)对该化合物的热稳定性作进一步考察, 从TG曲线上观察到该化合物在490 K有最大的蒸发失重速率.     

Chelerythrine chloride binding of guanosine in aqueous solution

In this work, the interaction between chelerythrine (CHE) and guanosine is studied using UV-vis and fluorescence measurements at various temperatures. The UV-vis spectra show that the increasing guanosine concentrations result in the decreasing absorption intensity and red shift of CHE E absorption band (267 nm). The fluorescence spectra are fitted to linear analysis, yielding a binding constant of 1.04×104 L/mol at 298.15 K of CHE with guanosine. Besides, with △rHΘm =-8.26 kJ/mol, △rGmΘ = -22.90 kJ/mol,and △rSmΘ = 49.38 J/(mol K) the interaction should be entropy-driven and exterothermic.     

Thermodynamic studies of the solvation of Ph4AsPh4B in mixed solvents (MeOH—DMF)

The thermodynamic data (ΔG⁰, ΔH⁰ and TΔS⁰) of the solvation of tetraphenylarsonium-tetraphenylborate (Ph₄AsPh₄B) and its neutral parts, tetraphenylgermanium (Ph₄Ge) and tetraphenylmethane (Ph₄C) in methanol—N,N-dimethylformamide mixed solvents are discussed.

The values of the free energy of transfer, Δ^s_MG⁰, are calculated from measurements of the solubilities of Ph₄AsPh₄B, Ph₄Ge and Ph₄C in the successive fractions of MeOH in DMF at three different temperatures (15, 25, 35°C). The values of Δ^s_MH⁰ and TΔ^s_MS⁰ for the derivatives are calculated from Δ^s_MG⁰ values.

The values of Δ^s_MG⁰, Δ^s_MH⁰ and TΔ^s_MS⁰ of tetraphenylarsonium and tetraphenylborate ions have also been carefully calculated. The ratios of Δ^s_MG⁰ values (Δ^s_MG⁰ = ΔG⁰(+)/ΔG⁰(−)) were found to be greater than unity. Similarly, the ratios of Δ^s_MH⁰ and TΔ^s_MS⁰ for the positive and negative ions were found to be greater than unity.