Synthesis and Structure of Copper(II) Nitrate Complexes with 2, 6‐Bis(pyrazolyl)pyridine

Three mononuclear copper(II) complexes of copper nitrate with 2, 6‐bis(pyrazol‐1‐yl)pyridine ( bPzPy ) and 2, 6‐bis(3′,5′‐dimethylpyrazol‐1‐yl)pyridine ( bdmPzPy ), [Cu(bPzPy)(NO₃)₂] ( 1 ), [Cu(bPzPy)(H₂O)(NO₃)₂] ( 2 ) and [Cu(bdmPzPy)(NO₃)₂] ( 3 ) were synthesized by the reaction of copper nitrate with the ligand in ethanol solution. The complexes have been characterized through analytical, spectroscopic and EPR measurements. Single crystal X‐ray structure analysis of complexes 1 and 2 revealed a five‐coordinate copper atom in 1 , whereas 2 contains a six‐coordinate (4+2) Cu^II ion with molecular units acting as supramolecular nodes. These neutral nodes are connected through O–H ··· O(nitrate) hydrogen bonds to give couples of parallel linear strips assembled in 1D‐chains in a zipper‐like motif.     

Structure and spectroscopic characterization of the quaternary system: Copper(II), pyridine-2,6-dicarboxylate, 2,2′-bipyridyl and pyridine

Conclusion The x-ray structural results confirm what has been ascertained by thermodynamic and spectroscopic data in aqueous solution(7). It is evident that the addition of pyridine to the solution containing the mixed species [Cu(bipy)(pydca)(H₂O)] leads to the substitution of a water molecule directly bound to copper(II) ion by a pyridine molecule. This experiment also demonstrated the presence of a water molecule in the equatorial plane of the complex.The subsequent diffractometric study on single crystals derived from the copper(II)/bipy/pydca system revealed the existence in the solid state of [Cu₂(bipy)₂(pydca)₂] · 4H₂O. Thus the pydca dianion, instead of forming the statistically favoured mixed complex [Cu(bipy)(pydca)], gives rise to crystals containing two different copper(II) environments: [Cu(pydca)₂]^2– and [Cu(bipy)₂]²⁺, linked by O-carboxylate bridges. The facility with which [Cu(bipy)(pydca)(py)] can be obtained shows that the addition of pyridine prevents the formation of polynuclear species.     

Zur Reaktion der Alkin‐Kupfer(I)‐Komplexe [CuCl(S‐Alkin)] und [Cu2Br2(S‐Alkin)(dms)] (S‐Alkin = 3,3,6,6‐Tetramethyl‐1‐thia‐4‐cycloheptin,dms = Dimethylsulfid) mit den Lithiumorganylen Phenyllithium und Fluorenyllithium

Organometallic Compounds of Copper. XX On the Reaction of the Alkyne Copper(I) Complexes [CuCl(S‐Alkyne)] and [Cu₂Br₂(S‐Alkyne)(dms)] (S‐Alkyne = 3,3,6,6‐Tetramethyl‐1‐thiacyclohept‐4‐yne; dms = Dimethylsulfide) with the Lithiumorganyls Phenyllithium und Fluorenyllithium The alkyne copper(I) bromide complex [Cu₂Br₂(S‐Alkyne)(dms)] ( 3 b ) (S‐Alkyne = 3,3,6,6‐tetramethyl‐1‐thiacyclohept‐4‐yne; dms = dimethylsulfide) reacts with phenyllithium to form a tetranuclear copper(I) complex of the composition [Cu₄(C₆H₅)₂(S‐Alkenyl)₂] ( 7 ) in low yield (4%). The reaction of the alkyne copper(I) chloride complex [CuCl(S‐Alkyne)] ( 2 a ) with fluorenyllithium in tetrahydrofuran (thf) affords a lithium cuprate of the composition [Li(thf)₄]⁺ [Cu₂(fluorenyl)₃(S‐Alkyne)₂]^– ( 8 ) (yield 32%). The structures of both new complexes 7 and 8 were determined by X–ray diffraction.     

Facile Insertion of Carbon Dioxide into Cu2(μ‐H) Dinuclear Units Supported by Tetraphosphine Ligands

Reactions of meso‐bis[(diphenylphosphinomethyl)phenylphosphino]methane (dpmppm) with Cu^I species in the presence of NaBH₄ afforded di‐ and tetranuclear copper hydride complexes, [Cu₂(μ‐H)(μ‐dpmppm)₂]X ( 1 ) and [Cu₄(μ‐H)₂(μ₄‐H)(μ‐dpmppm)₂]X ( 2 ) (X=BF₄, PF₆). Complex 1 undergoes facile insertion of CO₂ (1 atm) at room temperature, leading to a formate‐bridged dicopper complex [Cu₂(μ‐HCOO)(dpmppm)₂]X ( 3 ). The experimental and DFT theoretical studies clearly demonstrate that CO₂ insertion into the Cu₂(μ‐H) unit occurred with the flexible dicopper platform. Complex 2 also undergoes CO₂ insertion to give a formate‐bridged complex, [Cu₄(μ‐HCOO)₃(dpmppm)₂]X, during which the square Cu₄ framework opened up to a linear tetranuclear chain.     

Mono‐ and tetranuclear copper(I) complexes with N‐heterocyclic chelating and triphenylphosphine ligands: Crystal structures,luminescent and heterogeneous catalytic properties

N‐heterocyclic chelating and triphenylphosphine ligands react with cuprous halide to form a variety of copper(I) complexes, namely, mononuclear [Cu(PBO)(PPh₃)Br]^.CH₂Cl₂ ( 1 ) and [Cu(PBM)(PPh₃)I] ( 2 ) (PBO = 2‐(2′‐Pyridyl)benzoxazole, PBM = 2‐(2′‐Pyridyl)benzimidazole, PPh₃ = triphenylphosphine) and tetranuclear [Cu₄(μ₂‐I)₂(μ₃‐I)₂(PPh₃)₄]^.2CH₂Cl₂ ( 3 ) have been synthesized and characterized. Complexes 1 and 2 are basically alike; both of them are mononuclear and four‐coordinated, possessing a slightly distorted trigonal pyramidal geometry. Complex 3 is tetranuclear and the coordination numbers of the two copper(I) atoms are three and four, Cu(1) forming an approximate trigonal planar coordination environment, while Cu(2) is a slightly distorted trigonal pyramidal geometry, resulting in a distorted chair‐like conformation. Complexes 1 and 2 are emissive in the solid state at ambient temperature, with the maxima at 552 and 602 nm, respectively, due to a MLCT excited state. Moreover, complex 3 manifests promising heterogeneous catalytic activities for the degradation of methylene blue (MB), with degradation efficiency of 99% under ambient light.     

Synthesis,structure, and ligand exchange of a copper(II)-based molecular helix with 2,6-pyridinedicarboxylates

An one-dimensional (1-D) metal–organic polymer, [Cu₂(PDA)₂(DMF)₂]_n (PDA = 2,6-pyridinedicarboxylate, DMF = dimethylformamide), was synthesized by reaction of copper(II) nitrate hemi(pentahydrate) and 2,6-pyridinedicarboxylic acid in DMF. The complex shows a molecular helix structure consisting of five-coordinate Cu(II) building blocks with distorted square pyramidal geometry. Tridentate chelating PDA, DMF, and an oxygen from the carboxylate of the adjacent Cu(II) building unit are coordinated to the copper(II) center. The weakly coordinated DMF groups in [Cu₂(PDA)₂(DMF)₂]_n easily exchange with a pyridine to generate a pyridine-coordinated non-helical 1-D metal–organic polymer with six-coordinate pseudooctahedral Cu(II) units.     

Monomeric, tetrameric, and polymeric copper di-tert-butyl phosphate complexes containing pyridine ancillary ligands

The reaction of di-tert-butyl phosphate (((t)BuO)(2)P(O)(OH), dtbp-H) with copper acetate in the presence of pyridine (py) and 2,4,6-trimethylpyridine (collidine) has been investigated. Copper acetate reacts with dtbp-H in a reaction medium containing pyridine, DMSO, THF, and CH(3)OH to yield a one-dimensional polymeric complex [Cu(dtbp)(2)(py)(2)(mu-OH(2))](n) (1) as blue hollow crystalline tubes. The copper atoms in 1 are octahedral and are surrounded by two terminal phosphate ligands, two pyridine molecules, and two bridging water molecules. The mu-OH(2) ligands that are present along the elongated Jahn-Teller axis are responsible for the formation of the one-dimensional polymeric structure. Recrystallization of 1 in a DMSO/THF/CH(3)OH mixture results in the reorganization of the polymer and its conversion to a more stable tetranuclear copper cluster [Cu(4)(mu(3)-OH)(2)(dtbp)(6)(py)(2)] (2) in about 60% yield. The molecular structure of 2 is made up of a tetranuclear core [Cu(4)(mu(3)-OH)(2)] which is surrounded by six bidentate bridging dtbp ligands. While two of the copper atoms are pentacoordinate with a tbp geometry, the other two copper atoms exhibit a pseudooctahedral geometry with five normal Cu-O bonds and an elongated Cu-O linkage. The pentacoordinate copper centers bear an axial pyridine ligand. The short Cu.Cu nonbonded distances in the tetranuclear core of 2 lead to magnetic ordering at low temperature with an antiferromagnetic coupling at approximately 20 K (J(P) = -44 cm(-1), J(c) = -66 cm(-1), g = 2.25, and rho = 0.8%). When the reaction between di-tert-butyl phosphate (dtbp-H) and copper acetate was carried out in the presence of collidine, large dark-blue crystals of monomeric copper complex [Cu(dtbp)(2)(collidine)(2)] (3) formed as the only product. A single-crystal X-ray diffraction study of 3 reveals a slightly distorted square-planar geometry around the copper atom. Thermogravimetric analysis of 1-3 revealed a facile decomposition of the coordinated ligands and dtbp to produce a copper phosphate material around 500 degrees C. An independent solid-state thermolysis of all the three complexes in bulk at 500-510 degrees C for 2 days produced copper pyrophosphate Cu(2)P(2)O(7) along with small quantities of Cu(PO(3))(2) as revealed by DR-UV spectroscopic and PXRD studies.     

Tetranuclear Pt<Subscript>2</Subscript>Cu<Subscript>2</Subscript> Complex with a Staircase-Shaped Chain Aggregate in the Solid State

The reaction of the tetranuclear cyanide aquo complex [{Pt(CN)₄Cu(bipy)(H₂O)}₂]· 2H₂O with aqueous ammonia produces the new tetranuclear ammino-containing product [{Pt(CN)₄Cu(bipy)(NH₃)}₂] (1), with terminal cyanide groups and with NH₃ coordinated to the Cu atom. The distorted trigonal bipyramidal coordination about copper in 1 differs from the square-pyramidal coordination present in the starting material. The bipyridine ligand in 1 is nearly perpendicular to the tetranuclear core of the molecule, as opposed to its coplanar disposition in the aquo complex. The two platinum atoms of the tetranuclear core in 1 form Pt···Pt interactions of 3. 2390(8) Å with platinum atoms of neighboring molecules, producing an echelon-shaped supramolecular chain held together by staggered (CN)₄Pt···Pt(CN)₄ linkages, an aggregate structure which does not have a precedent in chemistry derived from the Pt(CN)₄ building block.     

Novel copper complexes based on the thiocyanate bridge - Synthesis, X-ray studies and magnetic properties

Three novel compounds {[Cu(bpzm)(SCN)][Cu(bpzm)(MeOH)][Cu(SCN)₄]}_n (1a), {[Cu₂(bpzm)₂(μ-SCN)(SCN)₃]}_n (1b) and [Cu₂(μ-SCN)₂(SCN)₂(dpa)₂] (2) have been obtained in one-step self-assembly reaction of copper dichloride, a suitable N-N ligand (bis(pyrazol-1-yl)methane and 2,2′-dipyridylamine) and ammonium thiocyanate. For the reaction involving bis(pyrazol-1-yl)methane, an unprecedented in situ reduction of some Cu(II) ions to Cu(I) has been observed. The compound {[Cu(bpzm)(SCN)][Cu(bpzm)(MeOH)][Cu(SCN)₄]}_n (1a) belongs to a relatively scarce group of mixed-valence Cu^II/Cu^I coordination polymers with interesting polymeric architecture. It creates infinite two-dimensional structure consisting of layers extending along crystallographic plane (0 0 1), in which the cations [Cu^II(bpzm)(SCN)]⁺ and [Cu^II(bpzm)(MeOH)]²⁺ are connected by ions [Cu^I(SCN)₄]³⁻ through single end-to-end thiocyanato bridges. Structure 1b consists two crystallographically independent chains. The chain A has a zig-zag form and extends along the crystallographic direction [0 0 1], whereas the second chain is linear and runs along the crystallographic direction [0 1 0]. The structure 2 consists of dinuclear [Cu₂(dpa)₂(μ-SCN)₂(SCN)₂] units. Variable-temperature magnetic susceptibility measurements show very weak antiferromagnetic interactions between the paramagnetic centres Cu(II) centers inside the crystal lattices of three novel compounds.     

Crystal Structures,Magnetic Properties and Catecholase‐Like Activities of μ‐Alkoxo‐μ‐Carboxylato Double Bridged Dinuclear and Tetranuclear Copper(II) Complexes

One μ‐alkoxo‐μ‐carboxylato bridged dinuclear copper(II) complex, [Cu₂(L¹)(μ‐C₆H₅CO₂)] ( 1 )(H₃L¹ = 1,3‐bis(salicylideneamino)‐2‐propanol)), and two μ‐alkoxo‐μ‐dicarboxylato doubly‐bridged tetranuclear copper(II) complexes, [Cu₄(L¹)₂(μ‐C₈H₁₀O₄)(DMF)₂]·H₂O ( 2 ) and [Cu₄(L²)₂(μ‐C₅H₆O₄]·2H₂O·2CH₃CN ( 3 ) (H₃L² = 1,3‐bis(5‐bromo‐salicylideneamino)‐2‐propanol)) have been prepared and characterized. The single crystal X‐ray analysis shows that the structure of complex 1 is dimeric with two adjacent copper(II) atoms bridged by μ‐alkoxo‐μ‐carboxylato ligands where the Cu···Cu distances and Cu‐O(alkoxo)‐Cu angles are 3.5 11 Å and 132.8°, respectively. Complexes 2 and 3 consist of a μ‐alkoxo‐μ‐dicarboxylato doubly‐bridged tetranuclear Cu(II) complex with mean Cu‐Cu distances and Cu‐O‐Cu angles of 3.092 Å and 104.2° for 2 and 3.486 Å and 129.9° for 3 , respectively. Magnetic measurements reveal that 1 is strong antiferromagnetically coupled with 2J =‐210 cm^?1 while 2 and 3 exhibit ferromagnetic coupling with 2J = 126 cm^?1 and 82 cm^?1 (averaged), respectively. The 2J values of 1–3 are correlated to dihedral angles and the Cu‐O‐Cu angles. Dependence of the pH at 25 °C on the reaction rate of oxidation of 3,5‐di‐tert‐butylcatechol (3,5‐DTBC) to the corresponding quinone (3,5‐DTBQ) catalyzed by 1–3 was studied. Complexes 1–3 exhibit catecholase‐like active at above pH 8 and 25 °C for oxidation of 3,5‐di‐tert‐butylcatechol.     

Neue Kupfer(I,II)-Verbindungen

New Copper(I, II) Compounds Complexes of the type [Cu^II(N∩N)₂][Cu^ICl_1+x]_2x (N∩N = en, pn, 2-amino picoline) are prepared from Cu(N∩N)₂Cl₂ and copper(I) chloride. [Cu^II(enac)][Cu^ICl₂]₂ — a complex with a macrocyclic cation — is obtained, by the reaction of Cuen₂Cl₂ in aqueous acetone. Diacetyl monoxime partially reduces copper(II) of Cu(NSMe)₂Cl₂ and in this way causes the formation of [Cu(NSMe)_2][CuCl₃] (NSMe = β-aminoethyl methylsulfide). On the other hand a template reaction of this oxime with Cu(NSMe)₂ (ClO₄)₂ produces Cu^II(ONNSMe)(ClO₄) (HONNSMe?CH₃C(NOH)C(NCH₂CH₂SCH₃)CH₃), which shows a reduced paramagnetism. Basing on magnetic behaviour, i. r. and vis spectra the structure of the new compounds is discussed.     

Synthesis and Characterization of Three Diverse Coordination Frameworks under Co-ligand Intervention

The chelating organic ligands of 2,2’-bipyridine (2,2’-bipy), di(pyrid-2-yl)amine (dpa) and 2,6-di(pyrid-2-ylamino)pyridine (dpap) were respectively applied to react with H2fum (fumaric acid) and copper salts, affording three different complexes [Cu2(fum)(2,2’-bipy)4]•2ClO4 (1), [Cu2(µ-OH)2(fum)(dpa)2]•2H2O (2) and [Cu(SO4)(H2O)(dpap)]•H2O (3). These complexes were determined by single-crystal X-ray diffraction. Each penta-coordinated Cu(II) ion exhibits a distorted trigonal bipyramidal geometry in 1. The fum ligand links copper ions to form a dinuclear copper unit. While in 2, the fum ligands connect [Cu2(µ-OH)2(dpa)2] unit to construct a 1D zigzag chain. Unexpectedly, when dpap instead of dpa was used under the same conditions, only one mononuclear complex 3 was formed. Crystal packings show that 1—3 form 3D supramolecular architectures through non-covalent interactions (multiple hydrogen bonds and C—H…π/π-π interactions). In addition, the study of the magnetic property reveals dominating ferromagnetic interactions between Cu(II) atoms in 1.     

Controlling the Structure of Manganese(II) Phosphates by the Choice and Ratio of Organophosphate and Auxiliary Ligands

Tetranuclear manganese(II) phosphates [Mn(dipp)(bpy)]₄?4 H₂O ( 1 ) and [Mn₄(dmpp)₂(dmppH)₄(bpy)₄(H₂O)₂]?H₂O ( 2 ) have been prepared from Mn(OAc)₂?4 H₂O and 2,6‐diisopropylphenyl phosphate (dippH₂) or 2,6‐dimethylphenyl phosphate (dmppH₂) in the presence of 2,2′‐bipyridine (bpy). In contrast, the reaction between [Mn(bpy)₂(OAc)(ClO₄)]?H₂O and dippH₂ affords [Mn(bpy)₂(dippH)]₂?2 ClO₄?2 CH₃OH ( 3 ). The reactions of Mn(OAc)₂?4 H₂O, dippH₂, and pyridine (py) or 3,5‐dimethylpyrazole (dmpz) in CH₃CN under reflux afford hexanuclear complexes [Mn₆(dipp)₆(py)₈]?2CH₃CN ( 4 ) and [Mn₆(dipp)₆(dmpz)₆(AcOH)₂]?2 H₂O ( 5 ), respectively. Although compounds 1 and 2 are tetrameric, the former is a closed cubane‐like structure resembling the D4R secondary building unit of zeolites, whereas the latter exists in a staircase structure with fused Mn₂O₄P₂ rings. The core structure of 3 contains a Mn₂O₄P₂ eight‐membered ring that resembles the S4R building block of zeolites. Single‐crystal X‐ray diffraction studies reveal that compounds 4 and 5 have a similar core structure and differ from each other by the neutral ligands coordinated to manganese ions. All six phosphate ligands exist in a doubly deprotonated [(RO)PO₃^2?] form and exhibit two types of binding modes [5.222] and [3.111]. An interesting feature of compounds 1 – 5 is that although they are oligonuclear complexes, there is an absence of oxido bridges. The magnetic properties of compounds 1 – 5 have been investigated in the temperature range 5–298 K, and it was found that all the compounds obey the Curie law.     

Remarkable solvent effects in the hydro‐ and solvothermal synthesis of copper‐1,10‐phenanthroline complexes

Compound {[Cu(II)/Cu(I)]₂(ophen)₄(Htpt)}^?2H₂O ( 1 ) was obtained by hydrothermal reaction. Compound 1 is a mixed‐valence copper coordination complex with a different coordination environment. The X‐ray structural analysis of 1 revealed two crystallographically independent dimeric [Cu₂(ophen)₂]⁺ units bridged by two µ₁‐carboxylate groups of the tpt ligand into a butterfly‐shaped molecule in the crystal structure. Compound [Cu(I)₃(CN)₃(phen)₃] ( 2 ) was synthesized using ethanol instead of water, and consisted of an infinite helix chain formed from [Cu(I)(phen)]⁺ units bridged by cyano groups. Copyright © 2007 John Wiley & Sons, Ltd.     

Tetra(μ3-hydroxo) bridged copper(II) tetranuclear cubane complexes: synthesis,crystal structure,and DNA binding studies

The tridentate Schiff base H₂L was synthesized by the condensation of equimolar amount of 1-amino-2-propanol and salicylaldehyde. The reaction of H₂L with an equimolar amount of Cu(CH₃COO)₂·H₂O in methanol leads to the formation of the tetranuclear Cu₄L₄, 1. However, reaction of equimolar amount of H₂L, copper(II) acetate, and 2,4,6-trimethylaniline in methanol forms a mixture of products which includes a discrete mononuclear complex Cu(L′)₂, 2m (where HL′ is a bidentate ligand), in addition to the tetranuclear Cu₄L₄ species, 2c. In both tetranuclear cubane species, the tridentate H₂L is both a chelating and a bridging ligand, after deprotonation of the enolic and the phenolic OH. The copper(II) centers are five-coordinate with a [N, O₄] donor set from the ligands. The coordination geometry about each copper is distorted square pyramidal with one nitrogen and two oxygen from one ligand and two oxygen from adjacent ligands in the next unit of the cubane. In mononuclear 2m, the ligand is bidentate and the coordination geometry around copper(II) is square planar. The absorption spectra strongly suggest that tetranuclear 1 interacts with CT-DNA.     

Kupferkomplexe des neuen Chelatliganden 1‐Methyl‐2‐(2‐thiophenolato)‐1H‐benzimidazol (mtpb) und dessen Oxidationsprodukten

Copper Complexes of the New Chelate Ligand 1‐Methyl‐2‐(2‐thiophenolato)‐1H‐benzimidazole (mtpb) and of its Oxidation Products Anodic electrolysis of copper in acetonitrile in the presence of Hmtpb leads to formation of yellow [Cu₄(mtbp)₄] which was crystallized as a dichloromethane solvate with two crystallographically independent cluster molecules in the unit cell. The copper(I) atoms exhibit slightly pyramidal S₂N coordination with bridging thiolate sulfur atoms. The two clusters contain the four copper atoms arranged in a more (Cu1‐Cu4) or less (Cu5‐Cu8) distorted bisphenoidal arrangement. Reaction of mtpb^— with Cu(ClO₄)₂ under anoxic conditions also produces [Cu₄(mtpb)₄]. However, the admittance of O₂ in the reaction of mtpb^— with copper(II) acetate in methanol causes oxidation of the sulfur atoms; a square‐pyramidal configurated copper(II) complex [Cu(CH₃CO₂‐κ²O)(L₁‐κN)(L₂‐κN, O)] has been isolated and crystallographically characterized in which L₁ is the neutral sulfinic methyl ester and L₂^— is the sulfonate derived from mtpb^—.     

Synthesis and structural characterization of a novel tetranuclear Cu(II) complex: [Cu<Subscript>4</Subscript>L<Subscript>2</Subscript>(pic)<Subscript>4</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]·2H<Subscript>2</Subscript>O

A novel Salen-type bisoxime ligand, 6,6′-dimethoxy-2,2′-[(1,4-butylene)dioxybis(nitrilomethylidyne)]diphenol (H₂L) and its tetranuclear Cu(II) complex, [Cu₄L₂(pic)₄(H₂O)₂]·2H₂O, have been synthesized and characterized by elemental analyses, IR, TG-DTA and ¹H-NMR etc. The X-ray crystal structure of the complex reveals that formation of a tetranuclear structure, which consists of four copper(II) atoms, two pentadentate L²⁻units, four picratols, two coordinated water molecules and two crystallizing water molecules. Around four copper ions are all octahedral geometries. It was demonstrated that the picratols in the tetranuclear copper(II) complex show a novel tridentate coordination mode.     

Synthesis, characterization and structural analysis of new copper(II) complexes incorporating a pyridoxal-semicarbazone ligand

The reaction between 3-hydroxy-5-hydroxymethyl-2-methyl-4-pyridinecarboxaldehyde semicarbazone (pyridoxal-semicarbazone or PLSC) and appropriate chloride, sulfate, nitrate or thiocyanate Cu(II) salts in water/alcohol mixtures resulted in the formation of new copper(II) complexes: [Cu(PLSC)Cl₂] (1), [Cu(PLSC)(H₂O)(SO₄)]₂·3H₂O (2), [Cu₂(PLSC)₂(NCS)₂](NCS)₂ (3), [Cu(PLSC)(NO₃)₂(CH₃OH)] (4) and [Cu(PLSC-2H]NH₃·H₂O (5). The complexes were characterized by elemental analysis, conductometric measurements and IR spectroscopy, while complexes 1, 2, 3 and 4 were further characterized by single crystal X-ray diffraction.     

Solvent‐controlled Syntheses and Crystal Structures of a Pair of Novel Thiocyanate‐bridged Copper(II) Complexes Constructed from 4‐Bromo‐2‐(cyclopropyliminomethyl)phenolate

A pair of novel thiocyanate‐bridged polynuclear copper(II) complexes, [Cu₂(BCP)₂(NCS)₂]_n ( 1 ) and [Cu₂(BCP)₂(MeOH)(NCS)₂]₂ ( 2 ) [BCP = 4‐bromo‐2‐(cyclopropyliminomethyl)phenolate], have been obtained from an identical synthetic procedure and starting materials using solvents as the only independent variable. Complex 1 was synthesized and crystallized using EtOH as the solvent, while complex 2 was synthesized and crystallized using MeOH as the solvent. Both complexes show novel self‐assembled supramolecular structures in their crystals as elucidated by X‐ray analyses. The polymeric dinuclear complex 1 contains [Cu₂(BCP)₂(NCS)₂] units as the building blocks, crystallizes in the Pbca space group. The monomeric tetranuclear complex 2 contains [Cu₂(BCP)₂(MeOH)(NCS)₂] units as the building blocks, crystallizes in the P2₁/n space group.     

Supramolecular complexes constructed with carboxylate Cu(II) and 2-(2-pyridyl)-benzimidazole via hydrogen bonding

Four copper(II) supramolecular complexes, {[Cu(Hpb)(mal)]·H₂O} _n (1), (Hpb?=?2-(2-pyridyl)-benzimidazole, mal?=?maleate), [Cu₄(pb)₄(cro)₄(MeOH)₂]·2MeOH (2) (cro?=?crotonate), [Cu₂(pb)(Hpb)(mac)₃(MeOH)] (3) (mac?=?α-methacrylate) and [Cu(Hpb)(acr)₂(H₂O)] (4) (acr?=?acrylate), based on carboxylate copper(II)-aromatic ligand systems which are assembled by combination of metal coordination, hydrogen-bond and π–π interactions, have been rationally designed and synthesized. Complex 1 forms a 3D supramolecular network with open channels by extending 2D undulating sheets constructed from 1D helical chains. Complex 2 generates a 2D grid-like sheet via unusual finite-chain tetranuclear molecules, with four copper atoms arranged in a line; the unit does not extend further due to the capping effect of the terminal methanol. Complexes 3 and 4 present a 1D sinusoidal structure and a 3D columnar network with 1D ladder-shaped double chains, respectively. Interestingly, coligand Hpb, deprotonated or/and neutral in different supramolecular complexes, provides hydrogen bonding and π–π stacking interactions. In complexes 2, 3 and 4, carboxylate anions show various bridging modes, which are reflected in their magnetic properties. Weak ferromagnetic coupling (syn-anti µ-OCO) exists in 1, antiferromagnetic (syn-syn µ-OCO) and weak ferromagnetic coupling (µ-O of the??COO group) in 2 and antiferromagnetic coupling (syn-syn µ-OCO) in 3.