Yttrium bis(alkyl) and bis(amido) complexes bearing N,O multidentate ligands. Synthesis and catalytic activity towards ring‐opening polymerization of L‐lactide

Methoxy‐modified β‐diimines HL ¹ and HL ² reacted with Y(CH₂SiMe₃)₃(THF)₂ to afford the corresponding bis(alkyl)s [L¹Y(CH₂SiMe₃)₂] ( 1 ) and [L²Y(CH₂SiMe₃)₂] ( 2 ), respectively. Amination of 1 with 2,6‐diisopropyl aniline gave the bis(amido) counterpart [L¹Y{N(H)(2,6‐iPr₂? C₆H₃)}₂] ( 3 ), selectively. Treatment of Y(CH₂SiMe₃)₃(THF)₂ with methoxy‐modified anilido imine HL ³ yielded bis(alkyl) complex [L³Y(CH₂SiMe₃)₂(THF)] ( 4 ) that sequentially reacted with 2,6‐diisopropyl aniline to give the bis(amido) analogue [L³Y{N(H)(2,6‐iPr₂? C₆H₃)}₂] ( 5 ). Complex 2 was “base‐free” monomer, in which the tetradentate β‐diiminato ligand was meridional with the two alkyl species locating above and below it, generating tetragonal bipyramidal core about the metal center. Complex 3 was asymmetric monomer containing trigonal bipyramidal core with trans‐arrangement of the amido ligands. In contrast, the two cis‐located alkyl species in complex 4 were endo and exo towards the O,N,N tridentate anilido‐imido moiety. The bis(amido) complex 5 was confirmed to be structural analogue to 4 albeit without THF coordination. All these yttrium complexes are highly active initiators for the ring‐opening polymerization of L ‐LA at room temperature. The catalytic activity of the complexes and their “single‐site” or “double‐site” behavior depend on the ligand framework and the geometry of the alkyl (amido) species in the corresponding complexes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5662–5672, 2007     

Isoprene polymerization with indolide‐imine supported rare‐earth metal alkyl and amidinate complexes

Reaction of 7‐{(N‐2,6‐R)iminomethyl)}indole ( HL¹ , R = dimethylphenyl; HL² , R = diisopropylphenyl) and rare‐earth metal tris(alkyl)s, Ln(CH₂SiMe₃)₃(THF)₂, generated new rare‐earth metal bis(alkyl) complexes LLn(CH₂SiMe₃)₂(THF) [L = L¹: Ln = Lu ( 1a ), Sc ( 1b ); L = L²: Ln = Lu ( 3a ), Sc ( 3b )] and mono(alkyl) complexes L²₂Lu(CH₂SiMe₃) ( 4a ). Treatment of alkyl complexes 1a and 4a with N,N′‐diisopropylcarbodiimide afforded the corresponding amidinates L¹Lu{iPr₂NC(CH₂SiMe₃)NiPr₂}₂ ( 2a ) and L²₂Lu{iPr₂NC(CH₂SiMe₃)NiPr₂} ( 5a ), respectively. These new rare‐earth metal alkyls and amidinates except 4a in combination with aluminum alkyls and borate generated efficient homogeneous catalysts for the polymerization of isoprene, providing high cis‐1,4 selectivity and high molar mass polyisoprene with narrow molar mass distribution (M_n = 2.65 × 10⁵, M_w/M_n = 1.07, cis‐1,4 98.2%, −60 °C). The environmental hindrance around central metals arising from the bulkiness of the ligands, the Lewis‐acidity of rare‐earth metal ions, the types of aluminum tris(alkyl)s and borate, and polymerization temperature influenced significantly on both the catalytic activity and the regioselectivity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5251–5262, 2008     

Half-sandwich dibenzyl complexes of scandium: Synthesis, structure, and styrene polymerization activity

Half-sandwich dibenzyl complexes of scandium have been prepared by stepwise treatment of scandium trichloride with lithium derivatives of silyl-functionalized tetramethylcyclopentadienes (C₅Me₄H)SiMe₂R (R = Me, Ph) and benzyl magnesium chloride. The resulting complexes [Sc(η⁵-C₅Me₄SiMe₃)(CH₂Ph)₂(THF)] and [Sc(η⁵-C₅Me₄SiMe₂Ph)(CH₂Ph)₂(1,4-dioxane)] show structure related to that of the corresponding bis(trimethylsilylmethyl) compounds [Sc(η⁵-C₅Me₄SiMe₂R)(CH₂SiMe₃)₂(THF)]. The four-coordinate complexes display η¹-coordinated benzyl ligands without significant interaction of the ipso-carbon of the phenyl moiety. Conversion of [Sc(η⁵-C₅Me₄SiMe₃)(CH₂Ph)₂(THF)] into the cationic species by treatment with triphenylborane in THF led to the formation of a stable charge separated complex [Sc(η⁵-C₅Me₄SiMe₃)(CH₂Ph)(THF)_x][BPh₃(CH₂Ph)]. Benzyl cation formed using [Ph₃C][B(C₆F₅)₄] in toluene resulted in a moderately active syndiospecific styrene polymerization catalyst.     

Rare earth metal bis(alkyl) complexes bearing amino phosphine ligands: Synthesis and catalytic activity toward ethylene polymerization

Reactions of neutral amino phosphine compounds HL^1-3 with rare earth metal tris(alkyl)s, Ln(CH₂SiMe₃)₃(THF)₂, afforded a new family of organolanthanide complexes, the molecular structures of which are strongly dependent on the ligand framework. Alkane elimination reactions between 2-(CH₃NH)-C₆H₄P(Ph)₂ (HL¹) and Lu(CH₂SiMe₃)₃(THF)₂ at room temperature for 3 h generated mono(alkyl) complex (L¹)₂Lu(CH₂SiMe₃)(THF) (1). Similarly, treatment of 2-(C₆H₅CH₂NH)-C₆H₄P(Ph)₂ (HL²) with Lu(CH₂SiMe₃)₃(THF)₂ afforded (L²)₂Lu(CH₂SiMe₃)(THF) (2), selectively, which gradually deproportionated to a homoleptic complex (L²)₃Lu (3) at room temperature within a week. Strikingly, under the same condition, 2-(2,6-Me₂C₆H₃NH)-C₆H₄P(Ph)₂ (HL³) swiftly reacted with Ln(CH₂SiMe₃)₃(THF)₂ at room temperature for 3 h to yield the corresponding lanthanide bis(alkyl) complexes L³Ln(CH₂SiMe₃)₂(THF)_n (4a: Ln = Y, n = 2; 4b: Ln = Sc, n = 1; 4c: Ln = Lu, n = 1; 4d: Ln = Yb, n = 1; 4e: Ln = Tm, n = 1) in high yields. All complexes have been well defined and the molecular structures of complexes 1, 2, 3 and 4b-e were confirmed by X-ray diffraction analysis. The scandium bis(alkyl) complex activated by AlEt₃ and [Ph₃C][B(C₆F₅)₄], was able to catalyze the polymerization of ethylene to afford linear polyethylene.     

Helicate tris(aryl)carbinolates bearing pendant NR2 donors – a new family of supporting ligands for the synthesis of Sc3+ alkyl complexes

The reactions of aryllithium reagents o-LiC₆H₄CH₂NR₂ with (MeO)₂CO afford two new tris(aryl)carbinols bearing pendant-NR₂ donor groups in the side chain [o-R NCH C H ] COH [R = Me, R + R = (CH) ]. These alcohols feature helical chirality due to differently inclined aromatic fragments and are presented in a crystalline cell as two M and P enantiomers. Carbinol (R = Me) readily reacts with (Me3SiCH2)3Sc(THF)2 to give a scandium bis(alkyl) complex [(o-C₆H₄CH₂NMe₂)₃CO]Sc(CH₂SiMe₃)₂ featuring rigid binding of the alkoxy anion through a κ¹-O, κ²-N chelating coordination mode     

Dinuclear Rare‐Earth Metal Alkyl Complexes Supported by Indolyl Ligands in μ‐η2:η1:η1 Hapticities and their High Catalytic Activity for Isoprene 1,4‐cis‐Polymerization

Two series of new dinuclear rare‐earth metal alkyl complexes supported by indolyl ligands in novel μ‐η²:η¹:η¹ hapticities are synthesized and characterized. Treatment of [RE(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of 3‐(tBuN?CH)C₈H₅NH ( L₁ ) in THF gives the dinuclear rare‐earth metal alkyl complexes trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH(CH₂SiMe₃)}Ind)RE(thf)(CH₂SiMe₃)]₂ (Ind=indolyl, RE=Y, Dy, or Yb) in good yields. In the process, the indole unit of L₁ is deprotonated by the metal alkyl species and the imino C?N group is transferred to the amido group by alkyl CH₂SiMe₃ insertion, affording a new dianionic ligand that bridges two metal alkyl units in μ‐η²:η¹:η¹ bonding modes, forming the dinuclear rare‐earth metal alkyl complexes. When L₁ is reduced to 3‐(tBuNHCH₂)C₈H₅NH ( L₂ ), the reaction of [Yb(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of L₂ in THF, interestingly, generated the trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (major) and cis‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (minor) complexes. The catalytic activities of these dinuclear rare‐earth metal alkyl complexes for isoprene polymerization were investigated; the yttrium and dysprosium complexes exhibited high catalytic activities and high regio‐ and stereoselectivities for isoprene 1,4‐cis‐polymerization.     

Alternating copolymerization of cyclohexene oxide and carbon dioxide catalyzed by noncyclopentadienyl rare‐earth metal bis(alkyl) complexes

The syntheses of several dialkyl complexes based on rare‐earth metal were described. Three β‐diimine compounds with varying N‐aryl substituents (HL¹=(2‐CH₃O(C₆H₄))N?C(CH₃)CH?C(CH₃)NH(2‐CH₃O(C₆H₄)), HL² = (2,4,6‐(CH₃)₃ (C₆H₂))N?C(CH₃)CH?C(CH₃)NH(2,4,6‐(CH₃)₃(C₆H₂)), HL³ = PhN?C(CH₃)CH(CH₃) NHPh) were treated with Ln(CH₂SiMe₃)₃(THF)₂ to give dialkyl complexes L¹Ln (CH₂SiMe₃)₂ (Ln = Y ( 1a ), Lu ( 1b ), Sc ( 1c )), L²Ln(CH₂SiMe₃)₂(THF) (Ln = Y ( 2a ), Lu ( 2b )), and L³Lu(CH₂SiMe₃)₂(THF) (3). All these complexes were applied to the copolymerization of cyclohexene oxide (CHO) and carbon dioxide as single‐component catalysts. Systematic investigation revealed that the central metal with larger radii and less steric bulkiness were beneficial for the copolymerization of CHO and CO₂. Thus, methoxy‐modified β‐diiminato yttrium bis(alkyl) complex 1a , L¹Y(CH₂SiMe₃)₂, was identified as the optimal catalyst, which converted CHO and CO₂ to polycarbonate with a TOF of 47.4 h^?1 in 1,4‐dioxane under a 15 bar of CO₂ atmosphere (T_p=130 °C), representing the highest catalytic activity achieved by rare‐earth metal catalyst. The resultant copolymer contained high carbonate linkages (>99%) with molar mass up to 1.9 × 10⁴ as well as narrow molar mass distribution (M_w/M_n = 1.7). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6810–6818, 2008     

Mixed ligands supported yttrium alkyl complexes:: Synthesis, characterization and catalysis toward lactide polymerization

Treatment of yttrium tris(alkyl)s, Y(CH₂SiMe₃)₃(THF)₂, by equimolar H(C₅Me₄)SiMe₃(HCp′) and indene (Ind-H) afforded (η⁵-Cp′)Y(CH₂SiMe₃)₂(THF) (1) and (η⁵-Ind)Y(CH₂SiMe₃)₂(THF) (2) via alkane elimination, respectively. Complex 1 reacted with methoxyamino phenols, 4,6-(CH₃)₂-2-[(MeOCH₂CH₂)₂-NCH₂]-C₆H₂-OH (HL¹) and 4,6-(CMe₃)₂-2-[(MeOCH₂CH₂)₂-NCH₂]-C₆H₂-OH (HL²) gave mixed ligands supported alkyl complexes [(η⁵-Cp′)(L)]Y(CH₂SiMe₃) (3: L = L¹; 4: L = L²). Whilst, complex 2 was treated with HL² to yield [(η⁵-Ind)(L²)]Y(CH₂SiMe₃) (5). The molecular structures of 3 and 5 were confirmed by X-ray diffraction to be mono(alkyl)s of THF-free, adopting pyramidal and tetragonal-bipyramidal geometry, respectively. Complexes 3 and 5 were high active initiators for the ring-opening polymerization of l-lactide to give isotactic polylactide with high molecular weight and narrow to moderate polydispersity.     

Dinuclear Dysprosium and Ytterbium Complexes Incorporating N,N‐Bis(pyrrolyl‐α‐methyl)‐N‐methylamine Ligand: Syntheses and Structures

Reaction of DyCl₃ with two equivalents of NaN(SiMe₃)₂ in THF yielded {Dy(μ‐Cl)[N(SiMe₃)₂]₂(THF)}₂ ( 1 ). X‐ray crystal structure analysis revealed that 1 is a centrosymmetric dimer with asymmetrically bridging chloride ligands. The metal coordination arrangement can be best described as distorted trigonal bipyramid. The bond lengths of Ln–Cl and Ln–N showed a decreasing trend with the contraction of the size of Ln³⁺. Treatment of N,N‐bis(pyrrolyl‐α‐methyl)‐N‐methylamine (H₂dpma) with 1 and known compound {Yb(μ‐Cl)[N(SiMe₃)₂]₂(THF)}₂, respectively, led to the formations of [Dy(μ‐Cl)(dpma)(THF)₂]₂ ( 2 ) and {Yb(μ‐Cl)[N(SiMe₃)₂]₂(THF)}₂ ( 3 ). Compounds 2 and 3 were fully characterized by single‐crystal X‐ray crystallography, elemental analysis, and ¹H NMR spectroscopy. Structure determination indicated that 2 and 3 exhibit as centrosymmetric dimers with asymmetrically bridging chloride ligands. One pot reactions involving LnCl₃ (Ln = Dy and Yb), LiN(SiMe₃)₂, and H₂dpma were explored and desired products 2 and 3 were not yielded, which indicated that 1 and {Yb(μ‐Cl)[N(SiMe₃)₂]₂(THF)}₂ are the demanding precursors to synthesize Dysprosium and Ytterbium complexes supported by dpma^2– ligand. Compounds 2 and 3 are the first reported lanthanide complexes chelated by dpma^2– ligand.     

“Constrained geometry” catalysts of the rare-earth metals for the hydrosilylation of olefins

A series of yttrium and lutetium alkyl complexes [Ln(η⁵-C₅Me₄ZNR′-κN)(CH₂SiMe₃)(THF)_n] (Ln = Y, Lu) was prepared by reacting the tris(trimethylsilylmethyl) precursor [Ln(CH₂SiMe₃)₃(THF)₂] with different linked amino-cyclopentadienes of the type (C₅Me₄H)ZNHR′ (Z = SiMe₂, CH₂SiMe₂; R′ = tBu, Ph, C₆H₄-tBu-4, C₆H₄-nBu-4). The catalytic activity of these alkyl complexes in the hydrosilylation of 1-decene and styrene using PhSiH₃ as reagent was examined under standard conditions. A significant influence of the ligand structure on the catalytic property (turnover frequency, regioselectivity) was observed with the yttrium complex [Y(η⁵-C₅Me₄CH₂SiMe₂NtBu-κN)(CH₂SiMe₃)(THF)] being the most active for 1-decene hydrosilylation.     

Bimetallic Rare Earth Alkyl Complexes Bearing Bridged Amidinate Ligands: Synthesis and Activity for L-Lactide Polymerization

Four novel bridged‐amidines H₂L {1,4‐R¹[C(=NR²)(NHR²)]₂ [R¹=C₆H₄, R²=2,6‐ⁱPr₂C₆H₃ (H₂L¹); R¹=C₆H₄, R²=2,6‐Me₂C₆H₃ (H₂L²); R¹=C₆H₁₀, R²=2,6‐ⁱPr₂C₆H₃ (H₂L³); R¹=C₆H₁₀, R²=2,6‐Me₂C₆H₃ (H₂L⁴)]} were synthesized in 65%–78% isolated yields by the condensation reaction of dicarboxylic acid with four equimolar amounts of amines in the presence of PPSE at 180°C. Alkane elimination reaction of Ln(CH₂SiMe₃)₃(THF)₂ (Ln=Y, Lu) with 0.5 equiv. of amidine in THF at room temperature afforded the corresponding bimetallic rare earth alkyl complexes (THF)(Me₃SiCH₂)₂LnL¹Ln(CH₂SiMe₃)₂(THF) [Ln=Y ( 1 ), Lu ( 2 )], (THF)(Me₃SiCH₂)₂LnL²Ln‐ (CH₂SiMe₃)₂(THF) [Ln=Y ( 3 ), Lu ( 4 )], (THF)(Me₃SiCH₂)₂YL³Y(CH₂SiMe₃)₂(THF) ( 5 ), (THF)(Me₃SiCH₂)₂YL⁴‐ Y(CH₂SiMe₃)₂(THF) ( 6 ) in 72% –80% isolated yields. These neutral complexes showed activity towards L‐lactide polymerization in toluene at 70°C to give high molecular weight (M>10⁴) and narrow molecular weight distribution (M_w/M_n≦1.40) polymers     

Tricoordinate Organochromium(III) Complexes Supported by a Bulky Silylamido Ligand Produce Ultra‐High‐Molecular Weight Polyethylene in the Absence of Activators

Low‐coordinate organoCr(III) complexes supported by the silylamido ligand –N(SiMe₃)DIPP (DIPP = 2,6‐diisopropylphenyl) are ethylene polymerization catalyst precursors without the need of additional cocatalyst. The reaction of CrCl₃(THF)₃ with 3 or 2 equiv. of LiN(SiMe₃)DIPP yields either a four‐membered cyclometalated Cr complex or Cr[N(SiMe₃)DIPP]₂Cl, respectively, with no trace of Cr[N(SiMe₃)DIPP]₃. Addition of 1 equiv. of LiN(SiMe₃)DIPP to Cr[N(SiMe₃)DIPP]₂Cl also leads to the four‐membered metallacycle, which upon heating transforms to a new six‐membered Cr metallacycle, likely via a σ‐bond metathesis step. Cr[N(SiMe₃)DIPP]₂Cl can be readily converted to bis(amido)Cr(III) vinyl and alkyl complexes Cr[N(SiMe₃)DIPP]₂R (R = vinyl, Bn, and Me). All of these structurally characterized low‐coordinate Cr(III) complexes with a Cr–C bond initiate the polymerization of ethylene in the absence of activators or cocatalysts, producing ultra‐high‐molecular weight polyethylene.     

Silyl‐Phosphino‐Carbene Complexes of Uranium(IV)

Unprecedented silyl‐phosphino‐carbene complexes of uranium(IV) are presented, where before all covalent actinide–carbon double bonds were stabilised by phosphorus(V) substituents or restricted to matrix isolation experiments. Conversion of [U(BIPM^TMS)(Cl)(μ‐Cl)₂Li(THF)₂] ( 1 , BIPM^TMS=C(PPh₂NSiMe₃)₂) into [U(BIPM^TMS)(Cl){CH(Ph)(SiMe₃)}] ( 2 ), and addition of [Li{CH(SiMe₃)(PPh₂)}(THF)]/Me₂NCH₂CH₂NMe₂ (TMEDA) gave [U{C(SiMe₃)(PPh₂)}(BIPM^TMS)(μ‐Cl)Li(TMEDA)(μ‐TMEDA)_0.5]₂ ( 3 ) by α‐hydrogen abstraction. Addition of 2,2,2‐cryptand or two equivalents of 4‐N,N‐dimethylaminopyridine (DMAP) to 3 gave [U{C(SiMe₃)(PPh₂)}(BIPM^TMS)(Cl)][Li(2,2,2‐cryptand)] ( 4 ) or [U{C(SiMe₃)(PPh₂)}(BIPM^TMS)(DMAP)₂] ( 5 ). The characterisation data for 3 – 5 suggest that whilst there is evidence for 3‐centre P?C?U π‐bonding character, the U=C double bond component is dominant in each case. These U=C bonds are the closest to a true uranium alkylidene yet outside of matrix isolation experiments.     

1,1,2,2-Tetramethyl-3-trimethylsilyl-1,2-disilacyclobutane: synthesis and spontaneous polymerization

Gas-phase dehalogenation of 1,2-bis[chloro(dimethyl)silyl]-2-trimethylsilylethane with alkali metals gave 1,1,2,2-tetramethyl-3-trimethylsilyl-1,2-disilacyclobutane (3). Its spontaneous ring-opening polymerization at room temperature afforded an amorphous linear polymer with T _g = ?8.9°C, M _w = 3.47·10⁵–3.85·10⁵, and M _w /M _n = 2.43—2.86. According to spectroscopic data (IR and ¹H, ¹³C, and ²⁹Si NMR), the backbone of the polymer consists of alternating monomer units joined in the “head-to-tail” ([Me₂SiCH(SiMe₃)CH₂SiMe₂SiMe₂CH-(SiMe₃)CH₂SiMe₂]) and “head-to-head” ways ([Me₂SiCH₂CH(SiMe₃)SiMe₂SiMe₂CH-(SiMe₃)CH₂SiMe₂]).     

Scandium,yttrium, and ytterbium bisalkyl complexes stabilized by monoanionic amidopyridinate ligands

A reaction of Sc, Y, and Yb amidopyridinate dichlorides with the corresponding amount of LiCH₂SiMe₃ was used to synthesize bis(trimethylsilylmethyl) complexes (Ap)Ln(CH₂SiMe₃)₂-(THF) (Ap is N-mesityl-6-(2,4,6-triisopropylphenyl)pyridine-2-amide (Ap^9Me), Ln = Y (2); Ap is N-(2,6-diisopropylphenyl)-6-(2,4,6-triisopropylphenyl)pyridine-2-amide (Ap*), Ln = Sc (3), Yb (4)). An exchange reaction of yttrium amidopyridinate dichloride derivative 1 with 4 equiv. of Bu^tLi in hexane gave the corresponding di-tert-butyl derivative Ap^9MeY(Bu^t)₂(THF) (5). Molecular structures of complexes 3 and 4 were established by X-ray diffraction. A method of the ligand solid angles was used to calculate the completion degree of the metal atom coordination sphere for the series of isomorphic derivatives (Ap*)Ln(CH₂SiMe₃)₂(THF) containing the central metal ions with different ionic radii (Sc, Y, Yb, Lu). According to this method, the amidopyridinate ligand solid angle in these complexes virtually does not vary, while the solid angles of coordinated THF molecule and alkyl ligands vary within a wide range.     

Organometallic Compounds of the Lanthanides. 157 [1] The Molecular Structure of Tris(trimethylsilylmethyl)samarium, ‐erbium, ‐ytterbium,and ‐lutetium

SmCl₃ reacts with Me₃SiCH₂Li in THF yielding Sm(CH₂SiMe₃)₃(THF)₃ ( 1 ). The single crystal X‐ray structural analyses of 1 , Er(CH₂SiMe₃)₃(THF)₂ ( 2 ), Yb(CH₂SiMe₃)₃(THF)₂ ( 3 ), and Lu(CH₂SiMe₃)₃(THF)₂ ( 4 ) show the Sm atom in a fac‐octahedral coordination and the heavier lanthanides Er, Yb, and Lu trigonal bipyramidally coordinated with the three alkyl ligands in equatorial and two THF molecules in axial positions.     

An unusual organoyttrium alkyl complex containing a [C5HMe3(η(3)-CH2)-C5H4N-κ]- ligand and an elusive cyclopentadienide-based scandium tuck-over zwitterion obtained by C-H bond activation

The acid–base reaction between Y(CH₂SiMe₃)₃(thf)₂ and the pyridyl‐functionalized cyclopentadienyl (Cp) ligand C₅Me₄H? C₅H₄N (1 equiv) at 0 °C afforded a mixture of two products: (η⁵:κ‐C₅Me₄? C₅H₄N)Y(CH₂SiMe₃)₂(thf) ( 1 a ) and (η⁵:κ‐C₅Me₄? C₅H₄N)₂YCH₂SiMe₃ ( 1 b ), in a 5:2 ratio. Addition of the same ligand (2 equiv) to Y(CH₂SiMe₃)₃(thf)₂, however, generated 1 b together with the novel complex 1 c , the first well defined yttrium mono(alkyl) complex (η⁵:κ‐C₅Me₄? C₅H₄N)[C₅HMe₃(η³‐CH₂)‐C₅H₄N‐κ]Y(CH₂SiMe₃) containing a rare κ/η³‐allylic coordination mode in which the C? H bond activation occurs unexpectedly with the allylic methyl group rather than conventionally on Cp ring. If the central metal was changed to lutetium, the equimolar reaction between Lu(CH₂SiMe₃)₃(thf)₂ and C₅Me₄H? C₅H₄N exclusively afforded the bis(alkyl) product (η⁵:κ‐C₅Me₄? C₅H₄N)Lu(CH₂SiMe₃)₂(thf) ( 2 a ). Similarly, the reaction between the ligand (2 equiv) and Lu(CH₂SiMe₃)₃(thf)₂ gave the mono(alkyl) complex (η⁵:κ‐C₅Me₄? C₅H₄N)₂LuCH₂SiMe₃ ( 2 b ), in which no ligand redistribution was observed. Strikingly, treatment of Sc(CH₂SiMe₃)₃(thf)₂ with C₅Me₄H? C₅H₄N in either 1:1 or 1:2 ratio at 0 °C generated the first cyclopentadienide‐based scandium zwitterionic “tuck‐over” complex 3 , (η⁵:κ‐C₅Me₄? C₅H₄N)Sc(thf)[μ‐η⁵:η¹:κ‐C₅Me₃(CH₂)‐C₅H₄N]Sc(CH₂SiMe₃)₃. In the zwitterion, the dianionic ligand [C₅Me₃(CH₂)‐C₅H₄N]^2? binds both to Sc1³⁺ and to Sc2³⁺, in η⁵ and η¹/κ modes. In addition, the reaction chemistry, the molecular structures, and the mechanism are also discussed in detail.     

Cyclocopolymerization of 1,6-heptadiene with ethylene by half-sandwich scandium catalysts

<正>~~     

Rare earth metal alkyl complexes bearing N,O,P multidentate ligands: Synthesis, characterization and catalysis on the ring-opening polymerization of l-lactide

Alkane elimination reactions of rare earth metal tris(alkyl)s, Ln(CH₂SiMe₃)₃(THF)₂ (Ln = Y, Lu) with the multidentate ligands HL^1-4, afforded a series of new rare earth metal complexes. Yttrium complex 1 supported by flexible amino-imino phenoxide ligand HL¹ was isolated as homoleptic product. In the reaction of rigid phosphino-imino phenoxide ligand HL² with equimolar Ln(CH₂SiMe₃)₃(THF)₂, HL² was deprotonated by the metal alkyl and its imino CN group was reduced to C-N by intramolecular alkylation, generating THF-solvated mono-alkyl complexes (2a: Ln = Y; 2b: Ln = Lu). The di-ligand chelated yttrium complex 3 without alkyl moiety was isolated when the molar ratio of HL² to Y(CH₂SiMe₃)₃(THF)₂ increased to 2:1. Reaction of steric phosphino β-ketoiminato ligand HL³ with equimolar Ln(CH₂SiMe₃)₃(THF)₂ afforded di-ligated mono-alkyl complexes (4a: Ln = Y; 4b: Ln = Lu) without occurrence of intramolecular alkylation or formation of homoleptic product. Treatment of tetradentate methoxy-amino phenol HL⁴ with Y(CH₂SiMe₃)₃(THF)₂ afforded a monomeric yttrium bis-alkyl complex of THF-free. The resultant complexes were characterized by IR, NMR spectrum and X-ray diffraction analyses. All alkyl complexes exhibited high activity toward the ring-opening polymerization of l-lactide to give isotactic polylactide with controllable molecular weight and narrow to moderate polydispersity.     

Zirconium complexes containing a diarylamido diphosphine ligand: Structural preferences controlled by ligand electronics and sterics

This work describes the preparation of [PNP]ZrX₃ ([PNP]⁻ = [N(o-C₆H₄PⁱPr₂)₂]⁻; X = Cl, Me, CH₂SiMe₃) whose structural preference is found to be a function of the electronic and steric nature of the monodentate ligand X⁻. The reaction of ZrCl₄(THF)₂ with [PNP]Li in toluene at room temperature generates [PNP]ZrCl₃ as a red solid in 60% yield. Alkylation of [PNP]ZrCl₃ with three equivalents of Grignard reagents in diethyl ether at −35 °C produces cleanly [PNP]ZrR₃ (R = Me, CH₂SiMe₃) as yellow crystalline materials. An X-ray diffraction study of [PNP]ZrCl₃ showed it to be a chloride-bridged binuclear species {[PNP]ZrCl₂(μ−Cl)}₂ in which both zirconium atoms are 7-coordinate whereas that of [PNP]ZrMe₃ revealed a mononuclear, 6-coordinate core structure. Interestingly, with the incorporation of more sterically demanding alkyls, [PNP]Zr(CH₂SiMe₃)₃ is a 5-coordinate compound wherein the amido phosphine ligand is κ²-N,P bound to zirconium. The solution structures of these molecules were also assessed by variable-temperature NMR spectroscopy.