Solute-solvent and solvent-solvent interactions in the preferential solvation of 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide in 24 binary solvent mixtures

The molar transition energy (E(T)) polarity values for the dye 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide were collected in binary mixtures comprising a hydrogen-bond accepting (HBA) solvent (acetone, acetonitrile, dimethyl sulfoxide (DMSO), and N,N-dimethylformamide (DMF)) and a hydrogen-bond donating (HBD) solvent (water, methanol, ethanol, propan-2-ol, and butan-1-ol). Data referring to mixtures of water with alcohols were also analyzed. These data were used in the study of the preferential solvation of the probe, in terms of both solute-solvent and solvent-solvent interactions. These latter interactions are of importance in explaining the synergistic behavior observed for many mixed solvent systems. All data were successfully fitted to a model based on solvent-exchange equilibria. The E(T) values of the dye dissolved in the solvents show that the position of the solvatochromic absorption band of the dye is dependent on the medium polarity. The solvation of the dye in HBA solvents occurs with a very important contribution from ion-dipole interactions. In HBD solvents, the hydrogen bonding between the dimethylamino group in the dye and the OH group in the solvent plays an important role in the solvation of the dye. The interaction of the hydroxylic solvent with the other component in the mixture can lead to the formation of hydrogen-bonded complexes, which solvate the dye using a lower polar moiety, i.e. alkyl groups in the solvents. The dye has a hydrophobic nature and a dimethylamino group with a minor capability for hydrogen bonding with the medium in comparison with the phenolate group present in Reichardt's pyridiniophenolate. Thus, the probe is able to detect solvent-solvent interactions, which are implicit to the observed synergistic behavior.     

Relative predominance of azo and hydrazone tautomers of 4-carboxyl-2,6-dinitrophenylazohydroxynaphthalenes in binary solvent mixtures

Azo-hydrazone tautomerism is a phenomenon that occurs in azo dyes possessing substituents conjugated to the azo linkage which has labile proton that can be exchanged intramolecularly. Thus the predominance of one tautomer over another is a function of many factors among which are solvent polarity, solvent type, solute-solvent interactions and the structure of the dye molecule itself. The 4-carboxyl-2,6-dinitrophenylazohydroxynaphthalenes, previously shown to exhibit azo-hydrazone tautomerism, were studied for the relative predominance of one form over another based on interaction at the microenvironment of binary solvent mixtures containing DMF and non-hydrogen bonding (CCl(4)), hydrogen bond donor (toluene, chloroform), hydrogen bond acceptor (acetonitrile, acetone) and the alcohols; ethanol and methanol as solvent pairs. The three dyes gave two main bands in the 50:50 mixture of DMF with these solvents consisting of a high energy band at 250-382 nm while the low energy bands for the dyes occurred at 415-485 nm. Spectral shifts in the binary solvent mixtures were related to the solvent dipolarity, basicity of the less polar component relative to DMF, substituent type, molar transition energy, formation constant for the hydrogen-bonding solvated complexes and the standard free energy change for hydrogen bonding with DMF. The relative predominance of the hydrazone tautomer bears a direct relationship to the basicity of the solvent, presence of hydrogen bond donor substituent and was associated with high molar transition energies and low formation constant. The microenvironment surrounding the dye molecules played a major role in the stability of one tautomer relative to the other.     

Solvent effects in the interaction of methyl-beta-cyclodextrin with solvatochromic merocyanine dyes

The UV-vis spectroscopic behavior of dyes: 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (1) and 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2) was investigated in solutions of methyl- beta-cyclodextrin (methyl-beta-CyD), using water, methanol, ethanol, propan-2-ol, butan-1-ol, acetone, acetonitrile, N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N,N-dimethylacetamide (DMA), chloroform and dichloromethane as solvents. In aqueous solutions of dye (2) the addition of M-beta-CD leads to a bathochromic shift (of the maximum absorption), showing that the probe was transferred to a microenvironment of lower polarity and suggesting the formation of a 1 : 1 dye (2) : CyD inclusion complex, with a binding constant of 128.5 +/- 3.5 dm(3) mol(-1). Data for dye 2 in alcohols showed hypsochromic shifts, which increased in the following order: methanol < ethanol < propan-2-ol < butan-1-ol. These observations appear to reflect dye-solvent interactions through hydrogen bonding. If dye-solvent interactions are strong, the CyD-dye interactions are consequently weak, but the latter increase in importance when the dye-solvent interaction becomes weaker. With hydrogen-bond accepting solvents, data for both dyes showed clearly increasing hypsochromic shifts following the order: DMSO < DMA < DMF < acetone < acetonitrile. This order is exactly the inverse of the increasing order of basicity of the medium. This indicates that the dominant factor for the observed effects in these solvents is the solvent-CyD interaction through hydrogen bonding involving the hydroxyl groups of the CyD and the basic groups of the solvents. These interactions diminish in intensity if the basic character of the medium is reduced, increasing the capability of the dye to interact with the CyD using its phenoxide donor moiety. The largest hypsochromic shifts were obtained in chloroform (66.0 nm) and dichloromethane (67.5 nm) with dye after addition of methyl-beta-CyD. In these specific situations, solvents display weak basic and acid properties, that enhanced CyD-dye interactions to such an extent that association complexes formed through hydrogen bonding could be detected (K11) values of 24.8 +/- 4.9 dm3 mol(-1) in dichloromethane and 66.1 +/- 8.0 dm3 mol(-1) in chloroform).     

Preferential solvation of Brooker's merocyanine in binary solvent mixtures composed of formamides and hydroxylic solvents

The ET polarity values of 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (Brooker's merocyanine) were collected in mixed-solvent systems comprising a formamide [N,N-dimethylformamide (DMF), N-methylformamide (NMF) or formamide (FA)] and a hydroxylic (water, methanol, ethanol, propan-2-ol or butan-1-ol) solvent. Binary mixtures involving DMF and the other formamides (NMF and FA) as well as NMF and FA were also studied. These data were employed in the investigation of the preferential solvation (PS) of the probe. Each solvent system was analyzed in terms of both solute-solvent and solvent-solvent interactions. These latter interactions were responsible for the synergism observed in many binary mixtures. This synergistic behaviour was observed for DMF-propan-2-ol, DMF-butan-1-ol, FA-methanol, FA-ethanol and for the mixtures of the alcohols with NMF. All data were successfully fitted to a model based on solvent-exchange equilibria, which allowed the separation of the different contributions of the solvent species in the solvation shell of the dye. The results suggest that both hydrogen bonding and solvophobic interactions contribute to the formation of the solvent complexes responsible for the observed synergistic effects in the PS of the dye.     

Individual solvation numbers around the nickel(II) ion in an N,N-dimethylformamide and N,N-dimethylacetamide mixture determined by Raman spectrophotometry.

Individual solvation numbers around the nickel(II) ion have been determined by titration Raman spectroscopy in N,N-dimethylformamide (DMF) and N,N-dimethylacetamide (DMA) mixtures at 298 K. The in-plane bending vibration (delta(O=C-N)) of DMF and the stretching vibration (v(N-CH3)) of DMA were used in the present analysis. These Raman bands of solvent molecules shift to higher frequencies upon coordination of the solvent molecules to the metal ion. By analyzing the band intensities of free and bound solvent molecules with increasing concentration of the metal ion, the solvation number around the metal ion can be evaluated. Because the individual solvation numbers of DMF and DMA around the nickel(II) ion in the mixture are determined independently, the total solvation number is obtained as their sum. It was found that the total solvation number remains 6 in all mixtures of the DMA mole fraction x = 0 - 1. Although DMF and DMA have practically the same electron-pair donor capacities, the nickel(II) ion prefers DMF to DMA, and an equal solvation number is attained at x = 0.75. This is ascribed to the solvation steric effect of DMA.     

Solvatochromism,halochromism, and preferential solvation of new dipolar guaiazulenyl 1,4-benzoquinone methides

The synthesis and the solvatochromic properties of five dyes, obtained by condensation of guaiazulene with 4-hydroxybenzaldehydes, are described. Crystal structures of a quinoid dye and a phenolic dye precursor are presented. The dyes are sensitive to the dipolarity-polarizability of the medium and to the hydrogen-bond donor ability of protic solvents. Their solvatochromism is discussed in terms of Kamlet-Taft's pi* and alpha scales, and their difference in behaviour is interpreted. Alkali and alkaline earth metal salts effect halochromism, with one exception due to extreme steric hindrance. Thus, this dye is capable of measuring solvent polarities without sensing the presence of electrolytes. Preferential solvation of the dyes in a series of binary solvent mixtures is explained quantitatively by solvent-exchange models.     

Unusual solvatochromism within 1-butyl-3-methylimidazolium hexafluorophosphate + poly(ethylene glycol) mixtures

Hybrid "green" solvent systems composed of room-temperature ionic liquids (ILs) and poly(ethylene glycols) (PEGs) may have enormous future potential. Solvatochromic absorbance probe behavior is used to assess the physicochemical properties of the mixture composed of IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) and PEG (average molecular weights of 200, 400, 600, and 1500) at ambient conditions. Lowest energy intramolecular charge-transfer absorbance maxima of a betaine dye, i.e., E(T)(N), indicates the dipolarity/polarizability and/or hydrogen-bond donating (HBD) acidity of the [bmim][PF 6] + PEG mixtures to be even higher than that of neat [bmim][PF(6)], the solution component with higher dipolarity/polarizability and/or HBD acidity. Dipolarity/polarizability (pi*) obtained separately from the electronic absorbance response of probe N, N-diethyl-4-nitroaniline shows a trend similar to E(T)(N ) thus confirming the unusually high dipolarity/polarizability of the [bmim][PF(6)] + PEG mixtures. Similar to E(T)(N ) and pi*, the HBD acidity (alpha) of [bmim][PF(6)] + PEG mixtures is also observed to be anomalously high. Contrary to what is observed for E(T)(N ), pi*, and alpha, the hydrogen-bond accepting (HBA) basicity (beta) of the [bmim][PF(6)] + PEG mixtures is observed to be lower than that predicted from ideal additive behavior indicating diminished HBA basicity of the mixture as compared to its neat components. A four-parameter simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation is shown to satisfactorily predict the solvatochromic parameters within [bmim][PF(6)] + PEG mixtures. It is demonstrated that [bmim][PF(6)] + PEG mixtures possess physicochemical properties that are superior to those of either the neat IL or the neat PEG.     

Solvent- and temperature-controlled inversion of π-facial selectivity in the 1,2-cycloaddition of singlet oxygen to hydroxyphenyl-substituted cyclohexadihydrofurans

Singlet-oxygenation of 3-hydroxyphenyl-substituted dihydrofurans fused with a cyclohexane 1a?c exclusively gave the corresponding syn/anti-stereoisomeric mixtures of dioxetanes 2a?c. The syn/anti-π-facial selectivity in the 1,2-cycloaddition of singlet oxygen (¹O₂) was found to be remarkably sensitive to the solvent as well as the reaction temperature. In fact, the solvent effect was so conspicuous that inversion of the syn/anti-π-facial selectivity was observed in different solvents, such as chloroform and toluene. An LSER (linear solvation energy relationships) analysis suggested that the Lewis-acidity/basicity and HBD (hydrogen-bond donor)/HBA (hydrogen-bond acceptor) ability as well as dipolarity/polarizability of the solvent played an important role in this change in syn/anti-π-facial selectivity. An investigation of the temperature-dependency of the singlet-oxygenation suggested that the syn/anti-π-facial-selective 1,2-cycloaddition of ¹O₂ to 1 was a conformationally-(entropy-) controlled process.     

Molecular-Microscopic Properties and Preferential Solvation in Protic Ionic Liquid Mixtures

Structural and molecular-microscopic properties of the solvatochromic probes 4-nitroaniline, 4-nitroanisole, and Reichardt’s dye were investigated in binary mixtures of ethylammonium propionate with methanol, ethanol, 1-propanol and 2-propanol. Solvatochromic parameters (α, hydrogen-bond donor acidity; β, hydrogen-bond acceptor basicity; π*, dipolarity/polarizability; $ E_{\text{T}}^{\text{N}} $ , normalized polarity parameter) in different binary mixtures of ionic liquid with molecular solvents were determined with UV–Vis spectroscopy. The $ E_{\text{T}}^{\text{N}} $ parameters show nearly ideal trends in all solvent mixtures, but the other parameters show different behavior in the mixtures. The π* parameters show a negative deviation from ideality in the ionic liquid/methanol system. In contrast, the α parameters have severe positive deviations from ideal behavior in ionic liquid/1-propanol and ionic liquid/2-propanol solvent mixtures. A synergistic solvation effect is observed for the π* parameters in IL/methanol mixtures. Specific solute–solvent interactions or solvent–solvent interactions, which cause non-ideal trends in some parameters, are justified and interpreted by the preferential solvation model.     

Solvatochromic azamethine dyes for probing the polarity of gold-cluster-functionalized silica particles

Azamethine dyes of the merocyanine type [4-(N,N-di-n-butylamino)-2-methylphenyl][2,4-di-keto-3-[N'-(n-hexyl)]-5-cyano-6-methyl-3-pyridinio]-1-azamethine (1) and [4-(N,N-diethylamino)-2-(N'-tert-butylcarboxy)-amidophenyl]-[2,4-diketo-3-[N"-(n-hexyl)]-5-cyano-6-methyl-3-pyridinio]-1-azamethine (2) have been used as surface-polarity indicators for gold-cluster-functionalized silica particles. Their UV/Vis absorption maxima range from about lambda=600 to 700 nm as a function of solvent polarity and are clearly separated from the surface plasmon UV/Vis absorption band of gold (lambda approximately 520-540 nm). Solvatochromism of both dyes has been investigated in 26 solvents of different polarity. The positive solvatochromic band shifts of 1 and 2 can be well expressed in terms of the empirical Kamlet-Taft solvent polarity parameters alpha and pi*. They are mainly sensitive to the dipolarity/polarizability (pi* term; 70-75 %) and HBD (hydrogen-bond donating) acidity (alpha term) of the solvent. Both dyes adsorb readily on functionalized silica samples from solutions in 1,2-dichloroethane or cyclohexane. The surface polarities of gold-cluster-functionalized silica particles, with and without co-adsorbed L-cysteine and poly(ethylenimine), have been investigated by using these solvatochromic dyes. The specific interaction of dye 2 with cysteine has been examined independently by quantum-chemical calculations by using the AM1 and PM3 methods.     

在278.15-318.15 K范围内DMF-H2O体系的超额摩尔体积及DMF的表观摩尔体积和偏摩尔体积的测定与研究

本文应用振动管式密度计, 测定了278.15—318.15 K范围内10个温度下, DMF-H_2溶液的密度随组成的变化. 根据密度值求出溶液的超额体积VE; 在全部浓度的范围内不同组成下DMF的表观摩尔体积φv及偏摩尔体积V_(DMF); 及VE、φv和V_(DMF)随组成变化的规律. 发现V_(DMF)随x_(DMF)的变化与NaCl由水至DMF-H_2O溶液的转移熵有对应的变化规律, 均在x_(DMF)≈0.075处有极值, 从而进一步对DMF-H_2O的液体结构进行了讨论, 认为当x_(DMF)=0.075时, 单个DMF分子可能嵌入12个水分子组成的分子笼中, 从而形成最紧密结构。     

Capillary electrophoresis in mixed aqueous-organic solvents: effect of aprotic dipolar N,N-dimethylformamide and N,N-dimethylacetamide on acidity constants of substituted aromatic acids

The change in the pKa values of substituted benzoic acids in binary mixtures of water with N,N-dimethylformamide (DMF) and N,N-dimethylacetamide (DMA), respectively, was determined up to a concentration of 80% (vol/vol) organic cosolvent. Such solvents are applied as media of the background electrolyte in capillary electrophoresis, with the intention of increasing the analyte solubility and the separation selectivity. The pKa values increase nonlinearly with increasing DMF and DMA concentration, and reach values between 2.5 and 3.7 pK units higher than in water at 80% organic solvent content. This change is discussed based on the concept of the medium effect, taking into account the particular stabilization of the species involved in the protolysis equilibria of the acids: HA, A-, and H+, in the different solvents. The contribution of the medium effect of the individual neutral acid HA on the delta pKa values is determined by solubility measurements. The increase in the delta pKa values, averaged for all five acids investigated, is compared in different mixed aqueous-organic media, consisting of methanol, ethanol, 1-propanol, acetonitrile, DMF, and DMA, respectively. The comparison is based on the third-order polynomial fit of the delta pKa versus organic solvent concentration data. It is found that, in this respect, acetonitrile resembles the lower alcohols, and is dissimilar to the other dipolar, aprotic solvents, DMF and DMA. The similarity of the solvent systems is depicted by cluster analysis.     

Hydrogen bonding properties of Coumarin 151, 500, and 35: the effect of substitution at the 7-amino position

The steady-state spectral properties (absorption and emission) of three structurally similar Coumarin dyes, C151, C500, and C35 were investigated in 13 different solvents. A Kamlet-Taft (KT) analysis of the spectral peak frequencies reveals that, in addition to polarity, hydrogen bonding between the carbonyl oxygen and a protic solvent in the excited state imparts maximum stabilization for C151 and minimum for C35, while that for C500 lies in between. The spectral properties of the three dyes in two solvents, chloroform and THF, which have similar polarity in the KT scale but have only hydrogen-bond donor (chloroform) and hydrogen-bond acceptor (THF) properties, are seen to be sensitive to the substitution pattern at the 7-amino position. In addition, a slow emission spectral relaxation is observed for C151 and C500 having a time constant of approximately 500 ps in chloroform. For C35 this was too fast to be detected by the time resolution of our setup. The exact reason for this slow spectral relaxation in chloroform is unclear at present, and further studies are needed to understand clearly the structural effects on the hydrogen bonding dynamics of these dyes.     

Solvatochromic Parameters and Preferential Solvation Behavior for Binary Mixtures of 1,3-Dialkylimidazolium Ionic Liquids with Water

Binary mixtures of 1,3-dialkylimidazolium based ionic liquids (ILs) and water were selected as solvent systems to investigate the solute-solvent and solvent-solvent interactions on the preferential solvation of solvatochromic indicators at 25℃. Empirical solvatochromic parameters, dipolarity/polarizability (π^*), hydrogen-bond donor acidity (α), hydrogen-bond acceptor basicity (β), and Reichardt's polarity parameters (E_T^N) were measured from the ultraviolet-visible spectral shifts of 4-nitroaniline, 4-nitroanisole, and Reichardt's dye. The solvent properties of the IL-water mixtures were found to be influenced by IL type and IL mole fraction (x_IL). All these studied systems showed the non-ideal behavior. The maximum deviation to ideality for the solvatochromic parameters can be obtained in the xIL range from 0.1 to 0.3. For most of the binary mixtures, the π^* values showed the synergistic effects instead of the E_T^N, α and β values. The observed synergy extent was dependent on the studied systems, such as the dye indicator and IL type. A preferential solvation model was utilized to gather information on the molecular interactions in the mixtures. The dye indicator was preferentially solvated on the following trend: IL >IL-water complex >water.     

Solvent and concentration effects on the visible spectra of tri-para-dialkylamino-substituted triarylmethane dyes in liquid solutions

We have characterized the spectroscopy properties of crystal violet (CV+) and ethyl violet (EV+) in liquid solutions as a function of the solvent type and dye concentration. The analysis of how solvent properties and dye concentration affects the electronic spectra of these tri-para-dialkylamino substituted tryarylmethane (TAM+) dyes was performed on the basis of two spectroscopic parameters, namely the difference in wavenumber (deltanu) between the maximum and the shoulder that appears in the short-wavelength side of the respective maximum visible band (deltanu = 1/lambda(shoulder)-1/lambda(max) cm(-1)), and the wavelength of the maximum absorption (lambda(max)). The solvent and the concentration effects on lambda(max) and deltanu have indicated that both solute/solute (ion-pairing and dye aggregation) and solute/solvent (H-bonding type) interactions modulate the shape of the visible electronic spectra of these dyes in solution. In solvent with small dieletric constant (epsilon < approximately 10), the formation of ion-pairs represents a major contribution to the shaping of these spectra. Upon increasing dye concentration the formation of ion-pairs was characterized by an increase in deltanu observed concomitantly with a red shift in lambda(max) In chloroform and chlorobenzene the ion-pair association constant of CV+ and EV+ with Cl- ions were found to be in the order of 10(6) and 10(5) M(-1), respectively. In trichloroethylene the association constant for the CV+Cl- pair was 10(8) M(-1). In water, dye aggregation instead of ion-pairing represents a major contribution to the shaping of the visible spectra of CV+ and EV+. Dye aggregation was indicated by an increase in deltanu observed concomitantly with a blue shift in lambda(max) upon increasing dye concentration. The distinct behavior of deltanu for dye aggregation and ion-pairing as a function of dye concentration can therefore assist in the characterization of these two distinct phenomena. The solute/solvent interactions were studied in a series of polar solvents in which solute/solute interactions do not occur in any detectable extent. The dependence found for deltanu as a function of the Kamlet-Tafts solvatochromic parameters (alpha, beta and pi*) is in keeping with previous inferences indicating that the splitting in the overlapped absorption band of CV+ and EV+ in hydroxilated solvents arises from a perturbation in the molecular symmetry induced by hydrogen bonding (donor-acceptor) type interactions with solvent molecules. A distinction between the effects of solute/solute and solute/solvent interactions on the visible spectra of these dyes is provided.     

The use of acridine orange base (AOB) as molecular probe to characterize nonaqueous AOT reverse micelles

The behavior of acridine orange base (AOB) in nonaqueous reverse micelles composed of n-heptane/AOT/polar solvent has been performed. Ethylene glycol (EG), propylene glycol (PG), glycerol (GY), formamide (FA), dimethylformamide (DMF), and dimethylacetamide (DMA) were employed as water substitutes. The studies were performed by static and time-resolved emission spectroscopy. Thus, the distribution of AOB between the two pseudophases of the aggregates was quantified by measuring the partition constants from emission spectra at different surfactant concentration. Similar values to those obtained by means of absorption spectroscopy were obtained. This match is indicating that AOB is not experiencing partition during the lifetime of the excited state. Partitioning to the micelles is strongly favored in micelles containing hydrogen-bond donor (HBD) solvents rather than non-HBD solvents. Variations of fluorescence lifetimes with AOT concentration confirm these results. By the solvatochromic behavior of AOB in the different systems it is shown that the microenvironment at the interface is distinct from that of the bulk polar solvent, indicating that the probe senses no "free" solvent. The steady state anisotropy (r) was measured for EG/AOT/n-heptane and DMF/AOT/n-heptane systems as representatives for HBD and non-HBD polar solvents, respectively. The value of r is higher in the micelles containing EG than that obtained with DMF, and increases with AOT concentration. This is explained as due to highly structured polar solvents in the inner core. EG is interacting with the polar heads of AOT through hydrogen-bond interaction, while DMF can only interact with the Na+ counterions. This is confirmed by the time-resolved emission spectra (TRES) of the probe in the micellar systems, in comparison with the bulk solvents.     

Polyelectrolyte-like behavior of polyethylene oxide/LiClO4 mixture in chloroform or chloroform/dimethylformamide mixed solvent

Lithium perchlorate (LiClO₄) was dissolved in dehydrated chloroform with polyethylene oxides (PEO) having different molecular weights. The mixing ratio of ether oxygen unit (? O? ) of PEO to cation (Li⁺) was set to 20:1. The solution viscosity of the PEO/LiClO₄ mixtures was measured using an Ubbelohde viscometer at 30.0°C. The concentration dependence of the reduced viscosity was analyzed by diluting the initial PEO/LiClO₄ mixed solution with pure chloroform to keep the ratio of ? O? to Li⁺ constant. The increase in the reduced viscosity for a dilute solution was found in every mixture system, but not in the PEO solution without salt. Similar experiments were also carried out in chloroform/dimethylformamide (DMF) mixed solvent (4:1 by volume). These results were analyzed using the Fuoss equation, which was applied for the analysis of a polyelectrolyte aqueous solution. Linear relations are depicted in the Fuoss plots, suggesting that the PEO/LiClO₄ mixture shows polyelectrolyte-like behavior in chloroform or in chloroform/DMF mixed solvent. This is attributed to the intramolecular electrostatic repulsion of lithium cations which are trapped by the PEO chains through ion–dipole interaction.     

Simultaneous spectrophotometric determination of tartrazine, patent blue V, and indigo carmine in commercial products by partial least squares and principal component regression methods

Two multivariate calibration methods, partial least squares (PLS-1) and principal component regression (PCR) were proposed and successfully applied to the simultaneous determination of three dyes, tartrazine (T) (E-102), patent blue V (P) (E-131), and indigo carmine (I) (E-132) in mixtures by ultraviolet-visible absorption spectrophotometry. Calibration models were evaluated by internal validation (prediction of dyes concentration in its own designed training set of calibration), by cross-validation (obtaining statistical parameters that show the efficiency for a calibration fit model), and by external validation over 19 synthetic mixtures of the three dyes in different ratios containing 2.4-17.6 mg l(-1) of T, 1.6-5.6 mg l(-1) of P, and 3.2-17.5 mg/l(-1) of I, with recoveries between 93.5 and 103.1% and over three commercial products, in which the proposed calibration models were satisfactorily applied without separation step. Repeatability and reproducibility studies (with the Students's and F tests) were achieved over two series of nine standards for each dye, showing no significant differences at 95% confidence level.     

Kinetic solvent effects on proton and hydrogen atom transfers from phenols. Similarities and differences

Bimolecular rate constants for proton transfer from six phenols to the anthracene radical anion have been determined in up to eight solvents using electrochemical techniques. Effects of hydrogen bonding on measured rate constants were explored over as wide a range of phenolic hydrogen-bond donor (HBD) and solvent hydrogen-bond acceptor (HBA) activities as practical. The phenols' values ranged from 0.261 (2-MeO-phenol) to 0.728 (3,5-Cl(2)-phenol), and the solvents' values from 0.44 (MeCN) to 1.00 (HMPA), where and are Abraham's parameters describing relative HBD and HBA activities (J. Chem. Soc., Perkin Trans. 2 1989, 699; 1990, 521). Rate constants for H-atom transfer (HAT) in HBA solvents, k(S), are extremely well correlated via log k(S) = log k(0) - 8.3 , where k(0) is the rate constant in a non-HBA solvent (Snelgrove et al. J. Am. Chem. Soc. 2001, 123, 469). The same equation describes the general features of proton transfers (k(S) decreases as increases, slopes of plots of log k(S) against increase as increases). However, in some solvents, k(S) values deviate systematically from the least-squares log k(S) versus correlation line (e.g., in THF and MeCN, k(S) is always smaller and larger, respectively, than "expected"). These deviations are attributed to variations in the solvents' anion solvating abilities (THF and MeCN are poor and good anion solvators, respectively). Values of log k(S) for proton transfer, but not for HAT, give better correlations with Taft et al.'s (J. Org. Chem. 1983, 48, 2877) beta scale of solvent HBA activities than with . The beta scale, therefore, does not solely reflect solvents' HBA activities but also contains contributions from anion solvation.     

Reversal in solvatochromism in some novel styrylpyridinium dyes having a hydrophobic cleft

The influence of solvent polarity on the electronic transition of four different N-hexadecyl styrylpyridinium dyes has been investigated in 15 solvents. The E(T)(30) scale has been used to propose a quantitative approach towards the relative stability of the electronic ground and excited state species. The extents of contribution of dipolar aprotic solvents towards the solvation of the excited species have been determined to be 42-48% for some of the dyes. Instead of a steady solvatochromism, all the dyes suffer a reversal in solvatochromism. The transitions of the solvatochromism, referred to as solvatochromic switches, are found to be at E(T)(30) values of approximately 50 for methyl and N,N-dimethylamino substituted dyes while at 37.6 for hydroxyl substituted dye and approximately 45 for 4-(1-methyl-2-phenylethenyl) pyridinium dye. A reversal in the trend of solvent effect in the later dye corresponding to 4-(4-methyl styryl)pyridinium dye has been attributed to an analogy of series and parallel electron flow.