Planar array of 1D gold nanoparticles on ridge-and-valley structured carbon

For fabrication of a planar array of 1D chains of gold nanoparticles prepared by a chemical process, the faceted (110) planes of sodium chloride crystals were used as templates to produce nanoscale ridge-and-valley structured carbon layers by a vacuum process. When these carbon layers loaded on copper grids were dipped in toluene solution of 3.4 nm gold nanoparticles followed by natural dry, a planar array of 1D chains of gold nanoparticles were formed on carbon layers, where the nanoparticles were immobilized predominantly in valleys and partly on ridges of carbon layers.     

Synthesis and characterization of gold nanoparticles stabilized by palladium(II) phosphine thiol

This work is focused on the synthesis of innovative hybrids made by linking gold nanoparticles to protected organometallic Pd(II) thiolate. The organometallic protected Pd(II) thiolate, i.e. trans-thioacetate-ethynylphenyl-bis(tributylphosphine)palladium(II) has been synthesized, in situ deprotected and linked to Au nanoparticles. In this way new hybrid, with a direct link between Pd(II) and Au nanoparticles through a single S bridge, has been isolated. The combination of the organometallic Pd(II) thiol with gold nanoparticles allows the enhancement and tailoring of electronic and optical properties of the new organic-inorganic nano-compound. Single-crystal gold nanoparticles, uniform in shape and size were obtained by applying a modified two-phase method (improved Brust-Schiffrin reaction). In addition, the chemical environment of the Au nanoparticles was investigated and a covalent bonding between Au nanoparticles and the organometallic thiols was observed.     

Constructing hybrid films of conjugated oligomers and gold nanoparticles for efficient photoelectronic properties

Hybrid films of conjugated oligomers and gold nanoparticles have been fabricated by a coordination approach on the surface of gold nanoparticles. This method facilitates mild linkage of the oligomer/nanoparticle layers in ambient conditions, which provides a general route for preparation of organic/inorganic interlayer superstructures. Characterization of the as-obtained hybrid film has been carried out by UV-vis absorption, fluorescence spectroscopy, and atomic force microscopy (AFM). The hybrid film exhibits dramatic changes in both optical and photovoltaic properties upon encapsulation of fullerene. A photoelectrical application is presented by taking electrochemical measurements of the self-assembled film. The results reveal potential technological uses in photovoltaic devices.     

Morphologies and surface plasmon resonance properties of monodisperse bumpy gold nanoparticles

The influence of the morphology of gold nanoparticles on the surface plasmon resonance was investigated experimentally and theoretically. Highly monodisperse bumpy gold nanoparticles of increasing size were synthesized, and the surface plasmon resonance wavelength shifted to longer wavelengths more rapidly with increasing particle size for bumpy particles than for spherical gold nanoparticles. The detailed surface morphology of bumpy gold nanoparticles was characterized by AFM, TEM, and SEM, and the optical properties were investigated on a single particle level. The comparison of the plasmon resonant properties between bumpy and spherical gold nanoparticles was also examined with a theoretical model.     

Dispersion of thiol stabilized gold nanoparticles in lyotropic liquid crystalline systems

A new method of forming stable dispersions of alkanethiol and aromatic thiol stabilized gold nanoparticles in two different lyotropic liquid crystalline mediums, namely, a columnar hexagonal phase made up of a Triton X-100/water system and an inverse columnar hexagonal phase made up of pure AOT, are presented. The dispersions have been characterized using small-angle X-ray scattering (SAXS) and polarizing optical microscopy. Our studies show that the gold nanoparticles are distributed outside the columns formed by both the surfactants. Such dispersions can find applications in the study of nanoparticles as well as in the development of devices based on some unique properties of metal nanoparticles.     

Biosensors elaborated on gold nanoparticles, a PM-IRRAS characterisation of the IgG binding efficiency

This work is focused on studying the grafting of gold nanoparticles (Np) on a cystamine self-assembled monolayer on gold, in order to build sensitive immunosensors. The synthesis and deposition of gold nanoparticles, 13 and 55 nm sizes, were characterised by combining Polarisation Modulation Infrared Reflection-Absorption Spectroscopy (PM-IRRAS), X-ray Photoelectron Spectroscopy (XPS) Surface Enhanced Raman Scattering (SERS), and Atomic Force Microscopy (AFM) which all indicated the formation of a dispersed layer of nanoparticles. This observation is explained by the compromise between the high reactivity of amine-terminated layers towards gold, and interparticle repulsions. Nps were then functionalised with antibody probes, and the recognition by an anti-rIgG was assayed both on planar and Np gold surfaces.The important result is that nanoparticles of 55 nm are preferable for the following reasons: they enable to build a denser and well dispersed layer and they increase both the number of receptors (IgGs) and their accessibility. Beside these geometric improvements, a net enhancement of the Raman signal was observed on the 55 nm nanoparticle layer, making this new platform promising for optical detection based biosensors.     

Interaction of ozone with gold nanoparticles

Gold nanoparticles interact with aqueous ozone to produce a surface plasmon resonance shift without aggregation of the nanoparticles. Given ozone's destructive nature, the surprising finding was that the gold nanoparticles returned to their original color and were able to cycle between the wavelengths as ozone was introduced and removed. Gold islands were made and tested for a gaseous ozone response. Similarly to the aqueous system, the gold islands show a cycling effect. Potentially, this system would be useful as a sensor that identifies the presence of ozone in gaseous media.     

Electrochemical and optical characterization of triarylamine functionalized gold nanoparticles

This paper describes the synthesis, structural analysis, and investigations of the optical and electrochemical properties of some gold nanoparticles (AuNPs) which consist of a triarylamine ligand shell attached to small gold cores (Au-Tara). The triarylamine chromophores were attached to small 4-bromobenzenethiol covered gold nanoparticles (ca. 2 nm in diameter) by Sonogashira reaction. This procedure yields triarylamine redox centers attached via π-conjugated bridging units of different length to the gold core. The AuNPs were analyzed with (1)H NMR spectroscopy, diffusion ordered NMR spectroscopy (DOSY), thermogravimetric analysis (TGA), and scanning transmission electron microscopy (STEM). Cyclic voltammetry (CV) technique was used to determine the composition of the redox active particles via the Randles-Sevcik equation. The optical and electrochemical properties of the Au-Tara nanoparticles and of their corresponding unbound ligands (Ref) were investigated with UV/vis/NIR absorption spectroscopy, Osteryoung square wave voltammetry (OSWV), and spectroelectrochemistry (SEC). These data show that the assembling of triarylamines in the vicinity of a gold nanoparticle can change the optical and electrochemical properties of the triarylamine redox chromophores depending on the kind and length of the bridging unit. This is due to gold core-chromophore and chromophore-chromophore interactions.     

Nanoscale mapping of plasmon resonances of functional multibranched gold nanoparticles

The optical response of multibranched gold nanoparticles is studied by means of electron energy-loss spectroscopy (EELS) in aberration corrected STEM mode. In every case the plasmon response is constant and variations in the maxima positions were found to be dependent on the branches aspect ratio. The good spatial resolution combined with the high energy resolution (0.18 eV) of the monochromated electron beam allows mapping the different plasmonic modes along the entire nanoparticles ranging from 0.7 eV up to 2.25 eV.     

Concentration of gold nanoparticles in the QCM sensitive film as a factor of adsorption properties controlling

The adsorption properties of sensitive films formed by gold nanoparticles, dropped from solutions with different nanoparticles content are investigated using mass-sensitive (QCM) sensors. The dependence of surface adsorption capacity on nanoparticles concentration is shown. The decrease of surface concentration of nanoparticles leads to the increase of sensors sensitivity to different alcohols and water. The adsorption character of water (response amplitude and kinetics) substantially differs form that of alcohols. The sensitivity of gold nanoparticles layers to water is more then one order higher then to alcohols. The kinetics of water adsorption runs in two stages.     

Surface-grafted hybrid material consisting of gold nanoparticles and dextran exhibits mobility and reversible aggregation on a surface

Gold nanoparticles linked to linear carboxylated dextran chains were attached to 3-aminopropyltriethoxysilane-functionalized glass surfaces. This method provides novel hybrid nanostructures on a surface with the unique optical properties of gold nanoparticles. The particles attached to the surface retain the capability to aggregate and disaggregate in response to their environment. This procedure presents an alternative method to the immobilization of gold nanoparticles onto planar substrates. Compared to gold nanoparticle monolayers, larger particle surface densities were obtained. Exposure to hydrophobic environments changes the conformation of the hydrophilic dextran chains, causing the gold nanoparticles to aggregate and inducing changes in the absorption spectrum such as red-shifting and broadening of the plasmon absorption peaks. These changes, characteristic of particle aggregation, are reversible. When the substrates are dried and then immersed in an aqueous environment, these changes can be visually observed in a reversible fashion and the sample changes color from the red color of colloidal gold to a bluish-purple color of aggregated nanoparticles. Surface-bound nanoparticles that retain their mobility when attached to a surface by means of a flexible polymer chain could expand the use of aggregation-based assays to solid substrates.     

Surfactantless photochemical deposition of gold nanoparticles on an optical fiber core for surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) probes based on gold nanoparticles modifying the core of the optical fiber were made by a surfactantless photochemical deposition method. The growth kinetics and shape evolution of gold nanoparticles depending on different experimental conditions were studied. It was found that, under the condition of detectable gold nanoparticle deposition, increasing the concentration of chloroauric acid (HAuCl(4)) was not conducive to the deposition whereas increasing the concentration of sodium citrate (Na(3)Ct) would speed up the deposition. By controlling the concentration of the reaction solution and irradiation time, we obtained fused spherical-like, spherical, and flowerlike gold nanoparticles. To test the SERS activity of the probes, the SERS spectra of a rhodamine 6G aqueous solution were recorded in direct detection mode and remote mode. We have also developed a new approach to improving the SERS sensitivity when detecting in remote mode.     

金纳米粒子的表面修饰及生物应用进展

近年来纳米材料被广泛应用于生物医学、航空航天和精细化工等领域。构成纳米材料的纳米粒子具有小尺寸效应、表面效应和宏观量子隧道效应等性质。其中金纳米粒子由于其独特的荧光特性、良好的生物相容性和表面等离子共振等性质,被广大科研人员进行深入研究。例如,在生物医学领域,科研人员构建了一系列新型的金纳米比色传感器、光学探针及各类载药体系等。然而,目前金纳米粒子仍存在水分散性差、肾清除效率低和量子发射产率低等问题,限制了其广泛应用。因此,研究人员对金纳米粒子表面进行多样化修饰,从而能有效克服上述缺点。本文就目前主流配体表面修饰金纳米粒子的研究进展进行了详细总结,着重介绍了功能化金纳米粒子在生物成像、生物检测、生物治疗三方面的应用,最后对金纳米粒子的临床治疗机制的探索以及商业化的应用进行了展望,希望能为相关领域的研究者们提供新思路。     

Pure surface plasmon resonance enhancement of the first hyperpolarizability of gold core-silver shell nanoparticles

We report the optical second harmonic (SH) response from gold core-silver shell nanoparticles supported at a liquid-liquid interface in the spectral region where the second harmonic generation (SHG) frequency is resonant with the surface plasmon (SP) resonance excitation of the nanoparticles. We compare these results with that obtained by classical linear optical absorption spectroscopy and show that the nonlinear optical response is dominated by the SP resonance enhancement with negligible contributions from the interband transitions. As a result, the SH spectrum exhibits two clear SP resonance bands attributed to the two SP resonances of the composite nanostructure formed by the gold core-silver shell nanoparticles. Absolute values of the hyperpolarizabilities are measured by hyper Rayleigh scattering (HRS) and compared that of pure gold nanoparticles. The hyperpolarizability measured at a harmonic energy of 3.0 eV, enhanced through excitation of the high energy SP resonance of the nanoparticle, increases with the silver content whereas the hyperpolarizability measured at a harmonic energy of 2.4 eV, enhanced through the excitation of the low energy SP resonance of the nanoparticle, decreases because of the shift of this resonance away from the harmonic frequency. The hyperpolarizability determined by HRS and the square root of the SHG intensities, scaling with the nanoparticle hyperpolarizability, have similar trends with respect to the silver content indicative of closely related adsorption properties yielding similar surface concentrations at the liquid-liquid interface.     

Biological synthesis of silver and gold nanoparticles using apiin as reducing agent

We report a novel strategy for the biological synthesis of anisotropic gold and quasi-spherical silver nanoparticles by using apiin as the reducing and stabilizing agent. The size and shape of the nanoparticles can be controlled by varying the ratio of metal salts to apiin compound in the reaction medium. The resultant nanoparticles were characterized by UV-vis-NIR, transmission electron microscopy (TEM), FT-IR spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The interaction between nanoparticles with carbonyl group of apiin compound was confirmed by using FT-IR analysis. TEM photograph confirming the average size of the gold and silver nanoparticles were found to be at 21 and 39 nm. The NIR absorption of the gold nanotriangles is expected to be of application in hyperthermia of cancer cells and in IR-absorbing optical coatings.     

Poly(3-hexylthiophene)/gold nanoparticle nanocomposites: relationship between morphology and electrical conductivity

The morphology and electrical properties of gold nanoparticles (AuNP) layer vacuum-deposited onto spin-cast thin films of poly(3-hexylthiophene), P3HT, were studied. The electrical conductivity was measured during temperature cycling and related to the morphology of the same composite structures, which was monitored by transmission electron microscopy (TEM) and extra-high resolution scanning electron microscopy (XHR SEM). Comparison to the analogous polystyrene/AuNP layers was made to distinguish the role of the polymer support on the morphology and electrical properties of the nanoparticles assembly. Gold deposited in a very thin layer formed a nanoparticles-like island structure with the morphology depending on the effective thickness of the deposited layer and on its subsequent thermal treatment. A stabilizing effect of the thiophene–gold interaction on the nanoparticles morphology was observed.     

Electrostatic assembly and growth of gold nanoparticles in cellulosic fibres

Synthetic studies of nanocomposites containing gold nanoparticles attached onto wood or bacterial cellulosic fibres have been performed in situ in the presence of the fibres or by polyelectrolyte-assisted deposition. The optical properties of the final nanocomposites could be tailored not only by the starting Au nanoparticles characteristics but also by the preparative method associated to the type of cellulosic fibres used as the substrate. Thus, gold nanoparticles assembled or generated in situ within cellulosic fibres, are excellent components for long term optical and chemically stable nanocomposites, which appear particularly interesting for security paper applications.     

Construction of simple gold nanoparticle aggregates with controlled plasmon–plasmon interactions

We have developed a colloidal assembly for the study of plasmon–plasmon interactions between gold nanoparticles. Colloidal aggregates of controlled size and interparticle spacing were synthesized on silica nanoparticle substrates. Following the immobilization of isolated gold nanoparticles onto silica nanoparticles, the surfaces of the adsorbed gold nanoparticles were functionalized with 4-aminobenzenethiol. This molecular linker attached additional gold nanoparticles to the ‘parent' gold nanoparticle, forming small nanoparticle aggregates. The optical absorption spectrum of these clusters differed from that of gold colloid in a manner consistent with plasmon–plasmon interactions between the gold nanoparticles.     

Spectrally-resolved atomic-scale length variations of gold nanorods

Functionality of gold nanorod structures as ultra-sensitive optical rulers is demonstrated. Arrays of gold nanorods were fabricated by electron beam lithography and lift-off techniques with high accuracy and uniformity. Their longitudinal plasmon scattering spectra were found to exhibit extreme sensitivity to the length of the nanorods. This phenomenon enables optical detection of the nanorod length variations comparable to the thickness of a few atomic layers of gold.     

Chemiluminescent reactions induced by gold nanoparticles

The reaction of gold nanoparticles with a potassium periodate-sodium hydroxide-carbonate system undergoes chemiluminescence with three emission bands at 380-390, 430-450, and 490-500 nm, respectively. It was found that the light intensity increased linearly with the concentration of the gold nanoparticles, and the CL intensity increased dramatically when the citrate ions on the nanoparticle surface were replaced by SCN(-). The shape, size, and oxidation state of gold nanoparticles after the chemiluminescent reaction were characterized by UV-visible absorption spectrometry, transmission electron microscopy (TEM), and X-ray photoelectron spectrometry (XPS). Gold nanoparticles are supposed to function as a nanosized platform for the observed chemiluminescent reactions. A chemiluminescent mechanism has been proposed in which the interaction between free CO(3)(*-) and O(2)(*-) radicals generated by a KIO(4)-NaOH-Na(2)CO(3) system and gold nanoparticles results in the formation of emissive intermediate gold(I) complexes, carbon dioxide dimers, and singlet oxygen molecular pairs on the surface of the gold nanoparticles. This work is not only of great importance for gaining a better understanding of the unique optical and surface properties and chemical reactivity of nanoparticles but also of great potential for developing new biosensing and immunolabeling technologies.