KINETICS OF NON-ISOTHERMAL CRYSTALLIZATION OF POLY (ETHYLENE TEREPHTHALATE) MODIFIED BY POLY (ETHYLENE GLYCOL)

The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship between the reciprocal of t 1/2 ( the half life of crystallization) and the appropriate temperature variable. The parameters such as the activation energy (Ed) for transport, the equilibrium melting temperature (T_m~0),the nucleation parameter (ψ),themaximum crystallization temperature (T_(e, max)), and the kinetic crystallizability (G) for the copolyesters were obtained. The influence of the PEG content in PET chains on the parameters characterizing crystallization kinetics and crystallization thermodynamics was discussed.     

CRYSTALLIZATION BEHAVIOR OF PURE AND ADDITIVE-CONTAINING POLY (ETHYLENE TEREPHTHALATE)

The isothermal crystallization of poly (ethylene terephthalate ) (PET),which is free of catalyst, stabilizer, oligomer and diethylene glycol (DEG), was studied by DSC. The crystallization behaviour of pure PET is different from commercial PET and a reasonable explanation is presented. The influences of catalyst, stabilizer, oligomer and DEG on the crystallization of pure PET were examined. It is shown that catalyst (Manganese acetate)and stabilizer (Triphenyl phosphite) result in an increase of the crystallization rate of PET; on the contrary, DEG and oligomer (cyclotetramer) result in a reduction of the crystallization rate. When catalyst and stabilizer coexist together, both of them promote the crystallization at lower temperature ,only a smaller effect was found at higher temperature, it is evident that metal phosphite is formed between the catalyst and stabilizer at higher temperature.     

取向非晶态聚对苯二甲酸乙二酯(PET)膜的结晶

采用小角和广角X-散射法比较了未拉和热拉PET膜在结晶性能方面的差别,热拉试样在分子链段的小尺度范围内基本上是无规取向,而在分子链的大尺度范围内却是高度取向的。研究结果表明:热拉PET膜的结晶诱导期较短,长周期发展得较快,结晶后小角X-线散射表现出明显的各向异性,在热处理过程中先出现显著的热收缩,随后又表现出结晶伸长现象,这些都和未拉试样有明显的差别。     

链解缠结聚对苯二甲酸乙二酯的结晶行为研究

采用冷冻萃取聚对苯二甲酸乙二酯(PET)溶液(0.1～10g/dL7种不同浓度,3种不同性能溶剂)的方法制备了解缠结PET试样.与链相互穿透且缠结的熔体骤冷试样相比,解缠结PET试样的结晶能力明显增强,且随着制样溶液浓度的降低,链间解缠结程度增加,PET的结晶能力逐渐增强,有序结构含量明显增加,但是如果制样溶液浓度太低,溶液中链间距离太大,则又不利于萃取过程中链间的有序堆砌而结晶.采用接触浓度c*附近的溶液,既可确保链间的有效解缠结又有利于链间的有序堆砌而结晶.PET的结晶能力甚至还受制样所用溶剂性能的影响,这是因为溶剂性能影响了溶液中链间的相互作用以及链的解缠结程度.     

自成核对聚对苯二甲酸1,3-丙二酯结晶行为的影响

The effects of self-seeding nucleation on the crystallization behavior and properties of poly( trimethylene terephthalale) were studied. Differential scanning calorimetry (DSC) results indicated that the crystallization temperature of paly(trimethylene terephthalate) increased obviously(increased about 20℃) after the process of selfseeding nucleation. The results of polarized light microscopy (PLM) showed that the spherulite size decreased markedly from 40μm to 8μm.     

单轴取向聚对苯二甲酸乙二酯非等温结晶动力学研究

采用等速升温DSC方法对单轴取向聚对苯二甲酸乙二酯 (PET)的结晶过程进行了研究 ,发现单轴取向PET的冷结晶峰表现为多重结晶峰 .等温DSC方法的研究结果进一步证实结晶重峰的存在 .为此 ,本文提出了一种依据非等温DSC曲线解析高聚物结晶动力学参数的新方法 .对单轴取向PET的研究结果表明 ,与其他方法相比较 ,由新方法计算出的理论曲线与实验数据能更好地吻合 .单轴取向PET的总的结晶过程由三个子结晶过程组成 .根据不同拉伸比 ,各个子过程的Avrami指数和质量分数的变化 ,对结晶机理进行了解释 .与各向同性PET样品相比 ,单轴取向PET在低温部分的结晶速率明显增快     

取向聚对苯二甲酸乙二酯纤维的非等温结晶动力学

取向聚对苯二甲酸乙二酯纤维的非等温结晶动力学张志英，赵家森（天津纺织工学院材料科学系天津３００１６０）关键词取向高聚物，聚对苯二甲酸乙二酯，非等温结晶，结晶动力学研究高聚物结晶动力学常用的等温方法有光透射法、密度法、显微镜法、Ｘ－射线衍射法、差示扫描...     

聚对苯二甲酸乙二酯的非等温结晶行为

用付里叶变换红外光谱法、示差扫描量热、广角Ｘ 射线衍射和密度法等手段，研究了聚对苯二甲酸乙二酯（ＰＥＴ）的非等温结晶行为．在１１０℃以上，ＰＥＴ的结晶度随温度的升高而增加；在１６０～２３０℃温度区间，ＰＥＴ的结晶度随温度的升高变化不大．但在其后的降温过程中，其结晶度显著增加．从高温缓冷试样的结晶度明显地比淬火试样的高．实验结果有力地支持了高聚物在结晶前链的折叠就已经形成的观点．     

聚β—羟基丁酯酯／超高分子量聚氧化乙烯共混体系相容性和结晶行为

为了解决废弃塑料引起的“白色污染”问题,世界各国竞相研制开发可生物降解高分子材料,其中,有关聚β羟基丁酸酯［ｐｏｌｙ（βｈｙｄｒｏｘｙｂｕｔｙｒａｔｅ）（ＰＨＢ）］的研究尤其活跃．然而,由于商品价格较高,材料本身抗冲击性能较差、加工窗口较窄等限制...     

成核剂对聚2,6-萘二甲酸乙二酯结晶行为的影响

通过DSC、偏光显微镜 (POM)和小角激光散射 (SALS)研究了苯甲酸钠 (SB)对聚 2 ,6 萘二甲酸乙二酯(PEN)结晶行为的影响 .研究发现SB是PEN的成核剂 .在高温下 ,SB与PEN发生化学反应 ,生成可以起到成核作用的物质 ,降低了PEN的成核表面自由能位垒 ,提高了PEN在高温区的结晶速率 .同时 ,SB还可以提高PEN在低温区的结晶速率 .此外 ,SB的加入还使PEN分别在高温区和低温区结晶得到的多角晶和球晶尺寸减小 ,这表明不管在高温区还是在低温区 ,SB都可以提高PEN的成核速率 .而含有SB的PEN结晶样品的SALS图像变得弥散、模糊 ,则说明SB使PEN在低温下结晶得到的球晶变得不完善     

聚氧化乙烯-聚苯乙烯-聚氧化乙烯三嵌段共聚物的微相分离与结晶

本工作研究了多分散和单分散聚氧化乙烯-聚苯乙烯-聚氧化乙烯三嵌段共聚物(PEO-PS-PEO)的结晶行为,及这些试样按非晶型嵌段共聚物进行微相分离后再结晶的结晶特点.     

PAA对PLA流变性能和热性能的影响

通过熔融共混法制备了一系列的PLA/PAA共混物,考察了PLA/PAA共混体系的流变行为和热性能(结晶行为和热降解行为).FTIR测试结果证实PLA与PAA分子链之间形成了氢键网络.动态剪切流变测试和DSC测试均表明共混体系的流变行为和冷结晶行为会随着PAA含量的改变而改变,这可能是由于PLA与PAA的氢键作用受到PAA含量的影响.另外,DSC测试证实共混体系中的氢键网络还会受到试样热历史的影响.当PAA含量较低(低于5 wt%)时,PLA/PAA共混体系中PAA与PLA熔体两相的相分离不严重,使得PAA与PLA分子链能够较大限度地接触而形成较强的氢键作用,因而可以明显减缓增塑作用对黏度降低的影响.     

聚十二烷二元酸丁二酯及其共聚酯的结晶行为研究

聚十二烷二元酸丁二酯是长碳链脂肪族聚酯中的一种新的聚合物材料．近年来，随着对环境问题的日益重视，利用脂肪族聚酯容易水解的特性，开发生物降解脂肪族聚酯材料的研究得到广泛开展．目前脂肪族二元酸酯的研究大多是围绕聚丁二酸酯、聚乙二酸酯及其共聚酯这一类降解速度较快的材料进行的．虽然这些聚酯已有部分商品化，但远远不能满足对特定降解速率材料的需求．长碳链脂肪族聚酯由于其具有类似PE的结构特征，又兼具聚酯的结构特征，有望在可降解包装材料、书籍装订、服装用热熔胶等方面获得广泛的应用．     

聚对苯二甲酸乙二酯非晶态膜片单轴热——拉伸中的结晶与松弛

用动态力学损耗温度谱作为测试手段,研究了非晶态PET膜片在78—112℃温度范围内的单轴拉伸。实验结果说明,在较低温度下所得结晶的拉伸试样,完全由于应变诱发结晶,发生在应力-应变曲线的屈服后应力开始上升的阶段。在较高温度下(90℃或更高)拉伸可得非晶态而且光学各向同性的试样,是由于分子链的小尺度取向在拉伸过程中已完全热松弛所致,而分子链的大尺度取向要通过高弹态流动而松弛,其速率较慢,用拉伸后试样两端固定时的应力松弛进行了观察。在较低温度下应力松弛后仍为非晶态,在较高温度下应力松弛到起始应力的1O％下才开始结晶。FTIR研究表明在这种状态下的结晶有一结晶诱导期,其时间尺度与应力松弛阶段相当。     

SYNTHESIS OF POLY(METHYLENE TEREPHTHALATE) AND COPOLYMERS WITH POLY(ETHYLENE TEREPHTHALATE)

Poly(methylene terephthalate) (PMT) and poly(ethylene terephthalate) (PET) were synthesized by triethylamine-mediated reactions of terephthalic acid and dihalomethanes or 1,2-dihaloethanes, respectively. Reactions with chloro compounds required longer reaction times and higher temper-atures than those with bromo. Copolymers were synthesized by using proportionate amounts of dihalomethane/1,2-dihaloethane mixtures. Copolymer compositions were determined by inte-grations of relative areas of methylene and ethylene ¹H NMR peaks. Mn values were determined from ¹H NMR end group signals. Mole fraction feed is linearly related to CH₂/CH₂CH₂ incorporation into copolymer products. Mechanisms are proposed to explain results.     

EFFECT 0F INTERFACIAL ADHESION ON CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLY (ETHYLENE TEREPHTHALATE)/GLASS BEAD COMPOSITES

The interfacial adhesion between poly (ethylene terephthalate) (PET) and glass beadwas investigated by scanning electron microscope and parallel-plate rheometer. Effect ofinterfacial adhesion on the crystallization and mechenical properties of PET/glass beadcomposites was also studied by differential scanning calorimeter and mechanical testers.The results obtained indicate that the glass bead has a heterogeneous nucleation effecton the PET crystallization. Although better interfacial adhesion is advantageous to theincrease of the tensile strength of the composite, yet it is unfavorable to the crystallizationof PET. It should be pointed out that the crystallization rate of filled PET is always higherthan that of pure PET, regardless of the state of interfacial adhesion.     

乙烯-甲基丙烯酸共聚物离聚体在聚对苯二甲酸乙二酯中的相分离行为

聚对苯二甲酸乙二酯(PET)结晶速度很慢,通常加入成核剂来提高结晶速度。从专利文献来看,以离子聚合物为成核剂的例子也是很多的。离子聚合物与小分子成核剂的显著差别是:离子聚合物有一个很长的碳氢主链,其侧基为酸基,酸基被部分或全部地中和成盐。很明显,离子聚合物不象小分子成核剂那样能很好地分散在PET基体中,而是以独立的相存在。作为PET体系系列研究的继续,本文报道了离子聚合物Surlyn在PET中的相分离行为。     

乙烯-甲基丙烯酸共聚物离聚体在聚对苯二甲酸乙二酯中的相分离行为

Surlyn is the sodium salt of ethylene/methacrylic acid copolymer. The phase separation behavior of blend of Surlyn and Poly(ethylene terephthalate)(PET) has been studied by Scanning Electron Microscope and IR. It is shown that particles of Surlyn are dispersed in PET matrix, and this phase separation is controlled by heat-treated condition of blend. When the thermal treatment temperature is higher, more reaction is occurred between Surlyn and PET, thus the compatibility of Surlyn with PET' enhances and less particles of Surlyn are found.     

COMPLEXATION BEHAVIOR OF POLY(ACRYLIC ACID) AND POLY(ETHYLENE OXIDE) IN WATER AND WATER-METHANOL

To investigate the effects of solvent type and temperature on the interpolymer complexation via hydrogen bonding, a study was made on the complex system of poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) in two kinds of solvent systems, pure water and water-MeOH (30 wt%) mixed solvent, at various temperatures using the Ubbelohde viscometer, pH-meter, and UV spectrophotometer. The repeating unit mole ratio at the most optimum complexation as confirmed by the reduced viscosity measurement was shifted from [PEO]/[PAA] ≈ 1.25:1 to 1.5:1 by the addition of methanol to water. From the UV measurement, the deviation from the “isosbestic point” (where the absorbance of the solution remains constant) has presented another evidence for the solvent effect on complexation. In addition, the analysis of the changes in thermodynamic properties upon complexation as well as the fraction of carboxyls associated with PEO oxygens and the complex stability constant as estimated by potentiometric titration at several temperatures reveals that the complex formation in mixed solvent became more unfavorable compared to that in pure solvent at high temperatures above 30°C. This could be explained by considering that in water the hydrophobic interaction as well as the hydrogen bonding may greatly contribute to the stabilization of the polymer complex formed, while in water-methanol the main stabilizing force would be the hydrogen bonding alone.     

非晶聚对苯二甲酸乙二酯的制备与表征

通过单体酯交换法和聚 2 ,6 萘二甲酸乙二酯 (PEN)与低分子量PET酯交换的方法分别合成了一系列NPA/TPA/EG和IPA/TPA/EG共聚酯 .随着NPA或IPA单元含量的增加 ,等温结晶速度迅速降低 ,共聚物的结晶性降低甚至非晶化 .由NMR分析得知单体酯交换法与聚合物酯交换法得到的共聚酯NPA/TPA/EG序列分布相近 ,链结构都接近完全无规 .由DSC结果分析 ,随共聚单体含量的增加 ,熔点和熔融热降低 ,结晶度也随之降低 .当NPA或IPA含量达到 2 0 %时 ,可以得到非晶的共聚酯 (APET) .本文还对共聚物组成与结晶温度的关系进行了表征