Ring conformations of d-glucose derivatives possessing two bulky silyl protecting groups at the 3,4-positions; the first observation of a stable full-axial chair conformer without bridge structures

The ring conformations of 3,4-bis-O-tert-butyldimethylsilyl- and 3,4-bis-O-tert-butyldiphenylsilyl-d-glucopyranoses as well as the corresponding phenyl 1-thio-d-glucopyranosides were investigated. Observations showed that the introduction of the two tert-butyldiphenylsilyl groups can flip the pyranose-ring into the ¹C₄ conformation possessing more axial substituents. All the substituents of the 3,4-bis-O-tert-butyldiphenylsilyl-β-d-glucopyranose were axially oriented.     

A 2,4-O-[(Z)-2-butenylene]-bridged glucopyranose: efficient construction of the bicyclic skeleton and its axial-rich twist-boat conformation

Synthesis and conformational analyses of 1-O-acetyl-3,6-di-O-benzyl-2,4-O-[(Z)-2-butenylene]-β-d-glucopyranose are described. The construction of the trioxabicyclo[6.3.1]dodecane skeleton of the compound was initiated from a ring-opened glucose, followed by the successive cyclization of first the nine-membered ring and then the six-membered ring. The pyranose of the compound was in ³S₁, an axial-rich twist-boat conformation. This result demonstrated an alternative method for the restriction of the pyranose into the axial-rich twist-boat conformation in contrast to the procedures that use bulky silyl protecting groups.     

Synthesis and structures of pyridoannelated 1,2,3,4-tetrazine 1,3-dioxides

Treatment of 2- and 4-amino-3-(tert-butyl-NNO-azoxy)pyridines with nitrating agents (N₂O₅or NO₂BF₄) afforded the first representatives of pyridoannelated 1,2,3,4-tetrazine di-N-oxides, viz., pyrido[2,3-e][1,2,3,4]tetrazine 1,3-dioxide (9), 7-nitropyrido[2,3-e][1,2,3,4]tetrazine 1,3-dioxide (10), and pyrido[3,4-e][1,2,3,4]tetrazine 2,4-dioxide (11). These compounds were studied by ¹H, ¹³C, and ¹⁴N NMR spectroscopy. The 1:1 complex of compound 10 with benzene was studied by X-ray diffraction analysis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2471–2477, November, 2004.     

Synthesis of Δ-15-deoxy-PG-J1 methyl ester and epi-Δ-15-deoxy-PG-J1

The synthesis of racemic Δ^12,14-15-deoxy-PG-J₁ is readily achieved in six steps employing as the key transformation a one-pot conjugate addition-Peterson olefination sequence using exo-2-trimethylsilyl-3a,4,7,7a-tetrahydro-4,7-methanoinden-1-one. Additionally a Noyori-type three-component coupling approach is employed for the synthesis of enantioenriched epi-Δ¹²-15-deoxy-PG-J₁ from 4(S)-tert-butyldimethylsilyloxycyclopent-2-enone.     

Novel fluoro-substituted benzo- and benzothieno fused pyrano[2,3-c]pyrazol-4(1H)-ones

A straightforward, two-step synthesis of fluoro substituted chromeno[2,3-c]pyrazol- and [1]benzothieno[2′,3′:5,6]pyrano[2,3-c]pyrazol-4(1H)-ones, respectively, is presented. Hence, treatment of 1-substituted or 1,3-disubstituted 2-pyrazolin-5-ones with fluoro substituted 2-fluorobenzoyl chlorides or 3-chloro-6-fluoro-1-benzothiophene-2-carbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane gave the corresponding 4-aroylpyrazol-5-ols, which were cyclized into the fused ring systems. 5-Fluorochromeno[2,3-c]pyrazol-4(1H)-one was obtained upon treatment of the 1-(4-methoxybenzyl) protected congener with trifluoroacetic acid. Treatment of 5-fluorochromeno[2,3-c]pyrazol-4(1H)-ones with methylhydrazine afforded novel tetracyclic ring systems such as 2-methyl-7-phenyl-2,7-dihydropyrazolo[4′,3′:5,6]pyrano[4,3,2-cd]indazole. Detailed NMR spectroscopic investigations (¹H, ¹³C, ¹⁵N, ¹⁹F) with the obtained compounds were undertaken.     

Strukturelle Abwandlungen an partiell silylierten Kohlenhydraten mittels Triphenylphosphin/Azodicarbonsäure-diäthylester. 3. Mitteilung [1]

Structural Modification on Partially Silylated Carbohydrates by Means of Triphenylphosphine/Diethyl Azodicarboxylate Reaction of methyl 2, 6-bis-O-(t-butyldimethylsilyl)-β-D -glucopyranoside ( 1a ) with triphenylphosphine (TPP)/diethyl azodicarboxylate (DEAD) and Ph₃P · HBr or methyl iodide yields methyl 3-bromo-2, 6-bis-O-(t-butyldimethylsilyl)-3-deoxy-β-D -allopyranoside ( 3a ) and the corresponding 3-deoxy-3-iodo-alloside 3c (Scheme 1). By a similar way methyl 2, 6-bis-O-(t-butyldimethylsilyl)-α-D -glucopyranoside ( 2a ) can be converted to the 4-bromo-4-deoxy-galactoside 4a and the 4-deoxy-4-iodo-galactoside 4b . In the absence of an external nucleophile the sugar derivatives 1a and 2a react with TPP/DEAD to form the 3,4-anhydro-α- or -β-D -galactosides 5 and 6a , respectively, while methyl 4, 6-bis-O-(t-butyldimethylsilyl)-β-D -glucopyranoside ( 1b ) yields methyl 2,3-anhydro-4, 6-bis-O-(t-butyldimethylsilyl)-β-D -allopyranoside ( 7a , s. Scheme 2). Even the monosilylated sugar methyl 6-O-(t-butyldimethylsilyl)-α-D -glucopyranoside ( 2b ) can be transformed to methyl 2,3-anhydro-6-O-(t-butyldimethylsilyl)-β-D -allopyranoside ( 8 ; 56%) and 3,4-anhydro-α-D -alloside 9 (23%, s. Scheme 3). Reaction of 1c with TPP/DEAD/HN₃ leads to methyl 3-azido-6-O-(t-butyldimethylsilyl)-3-deoxy-β-D -allopyranoside ( 10 ). The epoxides 7 and 8 were converted with NaN₃/NH₄Cl to the 2-azido-2-deoxy-altrosides 11 and 13 , respectively, and the 3-azido-3-deoxy-glucosides 12 and 14 , respectively (Scheme 4 and 5). Reaction of 7 and 8 with TPP/DEAD/HN₃ or p-nitrobenzoic acid afforded methyl 2,3-anhydro-4-azido-6-O-(t-butyldimethylsilyl)-4-deoxy-α- and -β-D -gulopyranoside ( 15 and 17 ), respectively, or methyl 2,3-anhydro-6-O-(t-butyldimethylsilyl)-4-O-(p-nitrobenzoyl)-α- and -β-D -gulopyranoside ( 16 and 18 ), respectively, without any opening of the oxirane ring (s. Scheme 6). - The 2-acetamido-2-deoxy-glucosides 19a and 20a react with TPP/DEAD alone to form the corresponding methyl 2-acetamido-3,4-anhydro-6-O-(t-butyldimethylsilyl)-2-deoxy-galactopyranosides ( 21 and 22 ) in a yield of 80 and 85%, respectively (Scheme 7). With TPP/DEAD/HN₃ 20a is transformed to methyl 2-acetamido-3-azido-6-O-(t-butyldimethylsilyl)-2,3-didesoxy-β-D -allopyranoside ( 25 , Scheme 8). By this way methyl 2-acetamido-3,6-bis-O-(t-butyldimethylsilyl)-α-D -glucopyranoside ( 19b ) yields methyl 2-acetamido-4-azido-3,6-bis-O-(t-butyldimethylsilyl)-2,4-dideoxy-α-D -galactopyranoside ( 23 ; 16%) and the isomerized product methyl 2-acetamido-4,6-bis-O-(t-butyldimethylsilyl)-2-deoxy-α-D -glucopyranoside ( 19d ; 45%). Under the same conditions the disilylated methyl 2-acetamido-2-deoxy-glucoside 20b leads to methyl 2-acetamido-4-azido-3,6-bis-O-(t-butyldimethylsilyl)-2,4-dideoxy-β-D -galactopyranoside ( 24 ). - All Structures were assigned by ¹H-NMR. analysis of the corresponding acetates.     

Stable axial-rich chair conformer of myo-inositol derivatives due to introduction of two adjacent bulky silyl protections

The ring-conformational change of myo-inositol derivatives by introducing two tert-butyldimethylsilyl, triisopropylsilyl, or tert-butyldiphenylsilyl groups into the 1,2-trans hydroxy groups--3,4- and 4,5-positions--were investigated. The cyclohexane cores of the 4,5-bis-O-silylated derivatives with tert-butyldiphenylsilyl or triisopropylsilyl groups were present in the axial-rich chair form.     

An unusual twist conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol

The ring conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol was in a twist form both in solid state and in solution. This is the first observation of a stable twist conformer induced by the introduction of bulky silyl protecting groups.     

Achievement of ring inversion of myo-inositol derivatives due to silyloxy/silyloxy repulsion enhanced by the trans-substituents on both sides

The introduction of quite bulky trialkyl or diarylalkylsilyl groups into vicinal trans-hydroxy groups induced a conformational flip of certain multifunctionalized cyclohexane rings from the usual chair form possessing more equatorial substituents (equatorial-rich chair form) into another chair-form that has more axial substituents (axial-rich chair form). This realization was experimentally revealed by the conformational study of the synthetic myo-inositol derivatives possessing two tert-butyldimethylsilyl (TBS), two triisopropylsilyl (TIPS), or two tert-butyldiphenylsilyl (TBDPS) groups on an adjacent trans-diol. Among them, the cyclohexane rings of the 4,5-bis-O-TIPS-myo-inositol, 4,5-bis-O-TBDPS-myo-inositol, and 1,2,3,6-tetra-O-benzyl-4,5-bis-O-TBDPS-myo-inositol were in the axial-rich chair form. Comparison of the ring conformations also revealed that the order of the repulsion was OTBDPS/OTBDPS>OTIPS/OTIPS>OTBS/OTBS, and the silyloxy/silyloxy repulsion was enhanced when the two silyloxy groups were placed in the center of the contiguous four equatorial substituents.     

Synthesis of glutamic acid and glutamine peptides possessing a trifluoromethyl ketone group as SARS-CoV 3CL protease inhibitors

Trifluoromethyl-β-amino alcohol 11 [(4S)-tert-butyl 4-amino-6,6,6-trifluoro-5-hydroxyhexanoate] was synthesized in five steps starting from Cbz-l-Glu-OH 5 where the key step involved the introduction of the trifluoromethyl (CF₃) group to oxazolidinone 7, resulting in the formation of silyl ether 8 [(4S,5S)-benzyl 4-(2-(tert-butoxycarbonyl)ethyl)-5-(trifluoromethyl)-5-(trimethylsilyloxy)oxazolidine-3-carboxylate]. Compound 11 was then converted into four tri- and tetra-glutamic acid and glutamine peptides (1-4) possessing a CF₃-ketone group that exhibited inhibitory activity against severe acute respiratory syndrome coronavirus protease (SARS-CoV 3CL^pro).     

Dipyridyl/pyridinium thieno[2,3-b]thiophenes as new atropisomeric systems. Synthesis, conformational analysis and energy minimization

Synthesis of a new class of cofacially oriented dipyridyl(pyridinium)lthieno[2,3-b]thiophenes with or without -CO₂Et and -COMe substituents at C2, and C5 positions of thieno[2,3-b]thiophene ring was readily accomplished using a double Dieckman cyclization protocol as the key step. While C2/C5 substituted dipyridylthieno[2,3-b]thiophenes exhibited syn/anti atropisomerism at least up to 70 °C with Arrhenius energy of activation (ΔG^≠) in the range of 17-18 kcal/mol, on the other hand unsubstituted dipyridylthieno[2,3-b]thiophene and its bis-N-quaternized salt were found to show free conformational rotation with an estimated ΔG^≠ of lower than 10 kcal/mol. Conformational energy minimization using AM1 protocol revealed a slight preference for the anti over syn isomers. Compared to the unsubstituted dipyridylthieno[2,3-b]thiophenes, higher energy barriers to rotation (3.7-5.1 kcal/mol) in substituted dipyridylthieno[2,3-b]thiophenes can be attributed to steric encumbrance resulting from -CO₂Et and -COMe substituents located on the non-rotating thienothiophene platform.     

Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Structural studies in the BaO-B2O3-TiO2 system by XAS and B-NMR

The structure of barium-titanium-metaborate xBaO-xB₂O₃-yTiO₂ (y=0%, 4%, 8%, 16% and x=50-y/2) amorphous and crystallized powders, obtained using a polymeric precursor method, was investigated by Ti and B K-edge X-ray absorption spectroscopy (XAS) and ¹¹B-NMR high-resolution techniques. XANES study of amorphous samples shows that Ti⁴⁺ ions exist as ^[4]Ti species associated to ^[6]Ti and ^[5]Ti species in a practically equivalent amount. After crystallization, titanium environment is predominately composed by ^[6]Ti species. According to XANES results obtained at the B K-edge, the fraction of boron in tetrahedral sites (^[4]B) reduces as the amount of TiO₂ is increased from x=0% to 4%, with a consequent increase of boron in trigonal sites (^[3]B). By a combination of ¹¹B-NMR spin-echo and triple quantum magic angle spinning (3Q-MAS) techniques, the detailed borate speciation was determined as consisting in ^[4]B and two kind of trigonal sites, ^[3]B_A and ^[3]B_B, corresponding, respectively, to borates sharing three and two O atoms with other boron units. NMR results reveal not only the reduction in boron coordination also seen by XANES but also the simultaneous reduction in the condensation degree of trigonal units, when the Ti content is increased in the glass. In crystallized samples, β-BaB₂O₄ and BaTi(BO₃)₂ phases were identified and quantified by ¹¹B-NMR.     

Role of crystallite size on the photoluminescence properties of SrIn2O4:Eu phosphor synthesized by different methods

Photoluminescence (PL) of Eu³⁺ was studied in SrIn₂O₄ host lattice. A complete solid solubility of Eu³⁺ has been found in the series SrIn_2−xEu_xO₄ [x=0-2.0]. The phase formation at a relatively low temperature and in a very short duration was achieved by combustion synthesis (CS). Concentration quenching of luminescence has been observed in SrIn_2−xEu_xO₄ [x=0.1-2.0] and the critical concentration for maximum emission was found to be with x=0.3. In order to find the role of crystallite size on the PL properties of SrIn₂O₄:Eu³⁺, the results obtained with phosphors synthesized by solid state reaction (SSR) and CS methods were compared.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

Convenient synthesis of N-isobutyryl-2′-O-methyl guanosine by efficient alkylation of O-trimethylsilylethyl-3′,5′-di-tert-butylsilanediyl guanosine

We present a novel route for the synthesis of N²-isobutyryl-2′-O-methyl guanosine, introducing 3′,5′-di-tert-butylsilyl and O⁶-trimethylsilylethyl groups as efficient protections during the 2′-O-methylation step with NaH/CH₃I. These protections were then removed simultaneously in a single step with TBAF. The eight-step synthesis is easy to perform, employing convenient commercially available reagents; crude mixtures are of satisfying purity, so only three chromatography purifications were required. Title compound was obtained in 25% overall yield from guanosine.     

Solid solubility of Yb2Si2O7 in β-, γ- and δ-Y2Si2O7

This paper examines the structural changes with temperature and composition in the Yb₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Yb₂O₃ and Y₂O₃ mixtures. A set of different compositions have been synthesised using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1650 °C during different times. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of Yb₂Si₂O₇ in β-Y₂Si₂O₇ and γ-Y₂Si₂O₇. Although Yb₂Si₂O₇ shows a unique stable polymorph (β), Yb³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ and δ-Y₂Si₂O₇ at high temperatures and low Yb contents. IR results confirm the total solid solubility in the system and suggest a constant SiOSi angle of 180° in the Si₂O₇ unit across the system. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing reduced stability fields. The diagram is in accordance with Felsche's diagram if average ionic radii are assumed for the members of the solid solution at any temperature, as long as the β-γ phase boundary is slightly shifted towards higher radii.     

Convenient Synthesis of Pyrazolo[4′,3′:5,6]pyrano[4,3-c][1,2]oxazoles via Intramolecular Nitrile Oxide Cycloaddition

A simple and efficient synthetic route to the novel 3a,4-dihydro-3H,7H- and 4H,7H-pyrazolo[4′,3′:5,6]pyrano[4,3-c][1,2]oxazole ring systems from 3-(prop-2-en-1-yloxy)- or 3-(prop-2-yn-1-yloxy)-1H-pyrazole-4-carbaldehyde oximes has been developed by employing the intramolecular nitrile oxide cycloaddition (INOC) reaction as the key step. The configuration of intermediate aldoximes was unambiguously determined using NOESY experimental data and comparison of the magnitudes of ¹J_CH coupling constants of the iminyl moiety, which were greater by approximately 13 Hz for the predominant syn isomer. The structures of the obtained heterocyclic products were confirmed by detailed ¹H, ¹³C and ¹⁵N NMR spectroscopic experiments and HRMS measurements.     

2-Deoxy-2-C-(2,3-dideoxy-α-d-erythro-hexopyranosyl)-β-d-glucopyranoses: Reinvestigation of Synthesis,Use in Glycosylation,and Conformational Analyses by NMR

Abstract

Conformational investigations using 1D TOCSY and ROESY ¹H NMR experiments on 1,3,4,6-tetra-O-acetyl-2-C-(4,6-di-O-acetyl-2,3-dideoxy-α-D-erythro-hexopyranosyl)-2-deoxy-β-D-glucopyranose (8) and related disaccharides showed that for steric reasons the C-linked hexopyranosyl ring occurs in the usually unfavoured ¹C₄ conformation and reconfirmed the structure of 1,3,4,6-tetra-O-acetyl-2-C-(4,6-di-O-acetyl-2,3-dideoxy-α-D-erythro-hex-2-enopyranosyl)-2-deoxy-β-D-glucopyranose (5). Glycosylation of 2,3,6-tri-O-benzyl-α-D-glucopyranosyl 2,3-di-O-benzyl-4,6-(R)-O-benzylidene-α-D-glucopyranoside (13) with acetate 8 using trimethylsilyl triflate as a catalyst afforded the α-D-linked tetrasaccharide 14. A remarkable side product in this reaction was the unsaturated tetrasaccharide 2,3,6-tri-O-benzyl-4-O-[4,6-di-O-acetyl-2,3-dideoxy-2-C-(4,6-di-O-acetyl-2,3-dideoxy-β-D-erythro-hexopyranosyl)-α-D-erythro-hex-2-enopyranosyl]-α-D-glucopyranosyl 2,3-di-O-benzyl-4,6-(R)-O-benzylidene-α-D-glucopyranoside (16) where in the C-linked hexopyranosyl ring an isomerization to the β-anomer had taken place to allow for the favoured ⁴C₁ conformation. The tetrasaccharide 14 was deacetylated and hydrogenolyzed to form the fully deprotected tetrasaccharide 18. The ¹ C ₄ conformation of the C-glycosidic pyranose of this tetrasaccharide was maintained as shown by an in depth NMR analysis of its peracetate 19.